Options
FNO Signals: EMA 9/21 + VWAP + S/R Break + Bull/BearWhat the script does
Tracks EMA 9 & EMA 21 to define short-term bullish or bearish trend direction.
Uses VWAP as an intraday fair-value line to filter trades in the direction of dominant order flow.
Detects recent swing highs and lows as dynamic support and resistance, then marks breakout candles as potential Smart Money “Break of Structure” zones.
Marks only the first bull or bear candle of a leg, helping to spot the start of momentum moves instead of every single candle.
How to use it
Use on 5‑min or 15‑min F&O charts (index or stock futures).
Focus on:
“BOS BUY” when price breaks above last resistance while EMA 9 > EMA 21 and price is above VWAP.
“BOS SELL” when price breaks below last support while EMA 9 < EMA 21 and price is below VWAP.
“BULL/BEAR” markers to see where a new directional leg starts, then align trades with the dominant EMA+VWAP trend.
FNO Simple Signals: EMA 9/21 + VWAP by Avis
How it behaves on chart (5 or 15 min F&O):
BUY signal: EMA 9 crosses above EMA 21 and price is above VWAP → one green “BUY” triangle under that candle.
SELL signal: EMA 9 crosses below EMA 21 and price is below VWAP → one red “SELL” triangle above that candle.
Below is a clean, stable indicator for F&O: EMA 9/21 + VWAP + very light ORB, no risky time arithmetic.
Option Price SR (csgnanam)## ⚖️ Disclaimer
This script is provided for **educational and analytical purposes only**.
It does not constitute financial advice.
Use proper risk management and trade responsibly.
---
## 📌 Indicator Concept & Trading Logic
This is a rule-based reference indicator designed to interpret **option price behavior** using **previous-day derived equilibrium levels**.
The indicator helps traders classify the market into **range-bound, breakout, or invalid trade zones** by observing how **ATM Call (CE) and Put (PE)** prices react around these levels.
All levels are **fixed for the trading day** and recalculated only on the next session.
---
## 📊 Core Levels Explained
The indicator plots the following **daily-anchored reference levels**:
* **PDH / PDL** – Previous Day High / Low of the option
* **PDC** – Previous Day Close
* **100% AVG (Breakout Zone)**
Average of previous-day CE and PE prices for the same strike
* **75% AVG (Midzone)**
Balance / decision zone
* **50% AVG (Support Zone)**
Lower acceptance / decay boundary
These levels act as **reaction zones**, not prediction lines.
---
## 🧠 Market Interpretation Logic
### 1️⃣ Range-Bound Market Condition
* When **both ATM CE and ATM PE** are **trading within the 100% AVG (Breakout) level**,
the market has a **high probability of remaining range-bound**.
* Premium expansion is limited on both sides.
* Ideal environment for **non-directional strategies**.
---
### 2️⃣ Breakout Validation
* A **true directional move** requires **asymmetry** between CE and PE.
* If **one side moves into breakout**, the **opposite side must stay suppressed**.
**Example:**
* If **CE breaks down below Midzone**,
then **PE must be above Breakout or at least above Midzone**.
* The same logic applies inversely for PE breakdowns.
This confirms **capital rotation**, not random premium decay.
---
### 3️⃣ Midzone (75%) – Reversal Watch Area
* The **Midzone** is a **high-probability reaction area**.
* Many intraday reversals initiate from this level.
* Price acceptance or rejection here defines:
* Continuation
* Mean reversion
* Failed breakout
This zone should be **closely monitored for structure and volume behavior**.
---
### 4️⃣ Support Zone (50%) – Trade Invalidation
* When an option price trades **below the Support (50%) level**:
* That option side becomes **non-tradable**
* Premium strength is lost
* Risk increases significantly
Trades **below support** are considered **low probability** and should be avoided.
---
## ⚠️ Important Usage Notes
* This indicator is **not a buy/sell signal generator**
* It is a **context and decision-filter tool**
* Best used in combination with:
* Price action
* Structure
* Spot/index behavior
* Time-of-day context
All levels are **session-anchored** and do **not repaint intraday**.
---
## 🎯 Intended Use Case
* Intraday option traders
* ATM / near-ATM focus
* Range vs directional market identification
* Premium behavior analysis
* Trade filtering and risk control
---
Anurag Balanced 0DTE Scalper SPY QQQBalanced 0DTE Scalper
1. Purpose: A 0DTE options day trading indicator for SPY/QQQ on 5-minute charts with visual CALL/PUT entry and exit signals.
2. Trend Filter: Uses 15-minute EMA crossover (9/21) + ADX to confirm trend direction before taking trades.
3. Entry Logic: Triggers on pullback to 5m EMA9 with RSI/VWAP/MACD confirmation, bullish or bearish candle required.
4. Exit System: ATR-based trailing stop, dual targets (TP1 partial, TP2 full), time stop, and auto-exit at EOD.
5. Risk Controls: Max trades/day limit, cooldown period after exits, session filter (avoids first 10 min & last 15 min).
6. Visual Feedback: Dynamic stop/target lines, entry/exit labels with P&L, background color for trend bias and cooldown.
7. Dashboard: 16-row panel showing bias, ADX, regime, RSI, VWAP, position, bars held, cooldown status, strike suggestions, and DTE recommendation.
Anurag - Balanced 0DTE Scalper QQQ SPYBalanced 0DTE Scalper is a professional-grade execution system designed specifically for the high-velocity world of 0DTE (Zero Days to Expiration) options trading on indices like SPY, QQQ, and IWM.
Unlike standard indicators that repaint or lag, this system uses Non-Repainting Multi-Timeframe Logic to align the institutional trend (15m) with precision entry triggers (5m). It is engineered to solve the two biggest killers of 0DTE traders: Theta Decay (holding too long) and Choppy Markets (trading without trend).
How It Works
1. The "Safety Belt" (15-Minute Trend Filter) Before any trade is taken, the system checks the confirmed 15-minute Trend and ADX (Strength).
No Repainting: It strictly uses the previous closed 15m bar to determine bias. Once a signal prints, it stays printed.
Regime Detection: It automatically blocks trades during low-volume "chop" (Low ADX) to save you from theta burn.
2. Precision Entry Triggers (5-Minute) Once the 15m trend gives the "Green Light," the system hunts for 5m setups using a confluence of:
EMA Crossovers: For immediate momentum.
VWAP Filter: Ensuring you are on the right side of institutional volume.
RSI Check: To avoid buying tops or selling bottoms.
3. Aggressive Risk Management (The "Profit Locker") 0DTE profits can vanish in seconds. This script manages the trade for you visually:
Dynamic Trailing Stop: Trails price based on candle Highs/Lows (not closes), allowing it to lock in profits at the peak of a spike.
Time Stop: If a trade stalls for 60 minutes (12 bars), the system triggers a "Time Exit." In 0DTE, time is money—if it's not working, get out.
Visual Levels: Automatically draws your Stop Loss, Target 1 (Conservative), and Target 2 (Runner) lines on the chart.
Features & Dashboard
Live Dashboard: Monitors Trend Bias, ADX Strength, RSI, and Open PnL in real-time.
On-Chart Tickets: Prints a "CALL OPEN" or "PUT OPEN" label with the exact Entry Price, Stop Loss, and Strike Suggestion.
Session Filters: Automatically avoids the first 10 minutes (Open Volatility) and the last 15 minutes (Close Chaos).
Settings Guide
Risk Mode:
Balanced (Default): The recommended blend of Trend + Momentum.
Conservative: Requires a very strong ADX trend. Fewer trades, higher win rate.
Aggressive: Ignores ADX strength. Good for FOMC/CPI days only.
Strike Suggestion: Automatically calculates the nearest Strike Price (ATM/OTM) for SPY/QQQ based on your settings.
Disclaimer
This tool is for educational purposes only. 0DTE options trading involves extreme risk of capital loss. Past performance (even with non-repainting logic) is not indicative of future results. Always manage your risk.
ETF-Futures Opening Ratio (Table)This indicator calculates the opening price ratio between an ETF and its corresponding futures contract using the 9:30 AM New York (RTH) opening price.
The ratio is locked at the official market open and remains fixed throughout the session, providing a stable reference for:
Translating ETF price levels into futures equivalents
Comparing relative value and premium/discount behavior
Maintaining consistent cross-instrument analysis during the trading day
The output is displayed in a simple on-chart table for quick reference and minimal chart clutter.
Institutional Renko Engine Regime Adaptive PRO
📘 USER GUIDE
Institutional Renko Engine (Step-by-Step)
________________________________________
1️⃣ WHAT THIS INDICATOR IS (IN SIMPLE WORDS)
“This indicator helps you trade only when the market is clean, trending, and worth trading — while controlling risk.”
It does three jobs:
1. Tells you which direction to trade
2. Tells you when to enter
3. Protects you from bad conditions
It does not predict price.
It helps you follow structure and discipline.
________________________________________
2️⃣ WHAT MAKES THIS DIFFERENT FROM NORMAL INDICATORS
Most indicators:
• React to time
• Give many false signals
• Ignore volatility
This indicator:
• Uses price movement (Renko) instead of time
• Adapts to volatility automatically
• Trades only in favorable regimes
• Limits risk like institutions do
________________________________________
3️⃣ UNDERSTANDING RENKO (VERY IMPORTANT)
What Is Renko?
Renko charts move only when price moves enough.
• No movement → no new brick
• Enough movement → new brick
Why This Helps Beginners
• Removes noise
• Shows real trends
• Prevents emotional overtrading
Think of it like this:
“The market must earn the right to give a signal.”
________________________________________
4️⃣ BRICK SIZE – HOW SENSITIVE THE SYSTEM IS
Brick size controls:
• How many signals you get
• How big your stop loss is
• How fast trends appear
Best Beginner Setting
✅ Brick Mode: ATR Adaptive
Why?
• Automatically adjusts to market speed
• Works on all assets
• Least manual tuning
________________________________________
5️⃣ GREEN ZONE & RED ZONE (YOUR DIRECTION FILTER)
This is the most important rule.
How Zones Are Created
• EMA 10 and EMA 30 are calculated on Renko price
What Zones Mean
Zone Meaning Beginner Rule
🟢 Green Uptrend Look only for BUY
🔴 Red Downtrend Look only for SELL
❌ Never trade against the zone.
________________________________________
6️⃣ HTF vs LTF (BIG PICTURE vs ENTRY TIMING)
HTF (Higher Timeframe)
• Shows overall market direction
• Example: 15 min / 1 hour
LTF (Lower Timeframe)
• Used for entries
• Example: 3 min / 5 min
How to Use Them Together
1. Check HTF trend
2. Trade only in that direction on LTF
Beginner Rule:
“HTF decides direction, LTF decides timing.”
________________________________________
7️⃣ ENTRY TYPES (WHEN TO ENTER)
🔹 A. First Entry (Trend Start)
Triggered when:
• Zone turns Green (or Red)
• HTF agrees
• New Renko direction starts
Use this when:
• Market just starts trending
⚠ Slightly riskier for beginners
________________________________________
🔹 B. Re-Entry (BEST FOR ENTRY)
Triggered when:
• Trend already exists
• Price pulls back near EMA 10
• Trend resumes
Why this is better:
• Higher success rate
• Less stress
• More professional
👉 USERS should focus on Re-Entries only.
________________________________________
8️⃣ VOLATILITY REGIMES (WHEN TO TRADE / WHEN TO WAIT)
The indicator labels volatility as:
• LOW
• NORMAL
• HIGH
Rules
Volatility What to Do
LOW ❌ Do not trade
NORMAL ✅ Best for Swing
HIGH ⚠ Trade carefully
This avoids:
• Boredom trades
• Choppy losses
________________________________________
9️⃣ EXECUTION STYLE (SCALPING vs SWING)
Swing Mode
• Wider stops
• Fewer trades
• More patience
Scalping Mode
• Faster exits
• Smaller stops
• Needs experience
👉 Beginners should always start with Swing Mode.
________________________________________
🔟 STOP LOSS & EXIT (VERY CLEAR RULES)
How Stops Work
• Stop loss is based on Renko bricks
• Not random points
Beginner Exit Rules
• Stop loss is automatic
• Target = 1R or trail with trend
• Never widen stop
Rule to remember:
“Small loss is success. Big loss is failure.”
Balanced 0DTE Scalper [Clean]Balanced 0DTE Scalper is a professional-grade execution system designed specifically for the high-velocity world of 0DTE (Zero Days to Expiration) options trading on indices like SPY, QQQ, and IWM.
Unlike standard indicators that repaint or lag, this system uses Non-Repainting Multi-Timeframe Logic to align the institutional trend (15m) with precision entry triggers (5m). It is engineered to solve the two biggest killers of 0DTE traders: Theta Decay (holding too long) and Choppy Markets (trading without trend).
How It Works
1. The "Safety Belt" (15-Minute Trend Filter) Before any trade is taken, the system checks the confirmed 15-minute Trend and ADX (Strength).
No Repainting: It strictly uses the previous closed 15m bar to determine bias. Once a signal prints, it stays printed.
Regime Detection: It automatically blocks trades during low-volume "chop" (Low ADX) to save you from theta burn.
2. Precision Entry Triggers (5-Minute) Once the 15m trend gives the "Green Light," the system hunts for 5m setups using a confluence of:
EMA Crossovers: For immediate momentum.
VWAP Filter: Ensuring you are on the right side of institutional volume.
RSI Check: To avoid buying tops or selling bottoms.
3. Aggressive Risk Management (The "Profit Locker") 0DTE profits can vanish in seconds. This script manages the trade for you visually:
Dynamic Trailing Stop: Trails price based on candle Highs/Lows (not closes), allowing it to lock in profits at the peak of a spike.
Time Stop: If a trade stalls for 60 minutes (12 bars), the system triggers a "Time Exit." In 0DTE, time is money—if it's not working, get out.
Visual Levels: Automatically draws your Stop Loss, Target 1 (Conservative), and Target 2 (Runner) lines on the chart.
Features & Dashboard
Live Dashboard: Monitors Trend Bias, ADX Strength, RSI, and Open PnL in real-time.
On-Chart Tickets: Prints a "CALL OPEN" or "PUT OPEN" label with the exact Entry Price, Stop Loss, and Strike Suggestion.
Session Filters: Automatically avoids the first 10 minutes (Open Volatility) and the last 15 minutes (Close Chaos).
Settings Guide
Risk Mode:
Balanced (Default): The recommended blend of Trend + Momentum.
Conservative: Requires a very strong ADX trend. Fewer trades, higher win rate.
Aggressive: Ignores ADX strength. Good for FOMC/CPI days only.
Strike Suggestion: Automatically calculates the nearest Strike Price (ATM/OTM) for SPY/QQQ based on your settings.
Disclaimer
This tool is for educational purposes only. 0DTE options trading involves extreme risk of capital loss. Past performance (even with non-repainting logic) is not indicative of future results. Always manage your risk.
CGlimit pro v.1📌 Limit Entry & Signal Indicator – Description
This indicator is designed to assist traders in identifying potential limit entry zones and entry confirmation signals based on price behavior and technical conditions. It highlights areas where price is likely to react, helping traders plan trades with a structured and disciplined approach.
The indicator combines limit entry logic with signal-based confirmations, allowing traders to choose how aggressively or conservatively they want to trade. All signals are generated using predefined rules based on historical price data and market behavior.
This tool does not predict the future and does not guarantee profits. It is intended to support decision-making when used together with proper market analysis and risk management.
🔹 Signal Options (4 Modes)
The indicator provides four signal options, allowing traders to customize entries based on their strategy:
Buy Limit Signal – Identifies potential bullish reaction zones where price may bounce.
Sell Limit Signal – Identifies potential bearish reaction zones where price may reject.
Buy Confirmation Signal – Appears when bullish conditions align near a limit zone.
Sell Confirmation Signal – Appears when bearish conditions align near a limit zone.
Traders can enable or disable each signal option according to their trading style.
🔹 Key Features
Marks Buy Limit and Sell Limit entry zones
Provides entry confirmation signals
Includes 4 customizable signal options
Helps improve risk-to-reward planning
Works on multiple timeframes
Suitable for Forex, Crypto, Indices, and Stocks
Can be used for scalping, day trading, and swing trading
🔹 How to Use
A Buy Limit signal highlights an area where buyers may step in.
A Sell Limit signal highlights an area where sellers may appear.
Confirmation signals can be used to improve timing.
Always confirm signals with trend direction, structure, or additional indicators.
Apply your own stop-loss and take-profit rules based on your strategy.
⚠️ Disclaimer:
This indicator is for educational and analytical purposes only and does not constitute financial advice. Trading involves risk, and users are responsible for their own trading decisions
Profits + Ichimoku Script is basis Profits calculated using vwap.
when the Profits line becomes white be ready to long and once it crosses the cloud long.
This gives bias and excellent risk to reward.
Trade with responsibility
ACT Professional SuiteThis is a proprietary system architecture designed to calculate structural capacity in financial markets.
PAPER TRADING / TESTING IS RECOMMENDED BEFORE LIVE DEPLOYMENT.
█ WHAT IT IS - ONE SCRIPT; TWO ENGINES
1. TRD Engine (Macro Trend)
• BUY (Green)
• SELL (Red)
2. OPT Engine (Micro Timing)
• HOLD (Grey)
• GROWTH (Green)
• LIMIT (Orange)
• SURFING (Orange)
• SELL (Red)
█ HOW TO USE
MODE A: PASSIVE SCANNING (Default)
Use this to identify potential entries.
• WAIT: System is stable.
• LONG/SHORT: Momentum is building in a specific direction.
MODE B: ACTIVE TRADE MANAGEMENT (The Core Feature)
Once you have entered a position, check the "Activate Management Mode" box in settings. The system will now guide your exit strategy based on your defined risk parameters.
The Status Sequence:
1. HOLD: Price is moving within safe limits. (Safe)
2. STRONG GROWTH: Price movement is increasing. (Profitable)
3. LIMIT REACHED: Your defined % target is hit. (Decision Point)
4. SURFING...: The system is moving beyond the limit.
5. SELL / BREACH: The structural limit is reached. Probability of collapse is critical. Immediate exit recommended.
█ ACCESS & AUTHORIZATION
This is an Invite-Only script. Access is automated via our central hub.
whop.com
Disclaimer: This tool provides structural analysis, not financial advice. Use rationally.
NY Open First Candle (9:30 AM EST) - 15m/1H/4H + FibNY Open First Candle (9:30 AM EST) - 15m/1H/4H + Fib
NSE Option Strike Prices by GoldenJetNSE Option Strike Prices Dashboard by GoldenJet
This Pine Script indicator is designed specifically to assist option buyers in making more informed decisions when trading NSE index options (NIFTY, BANKNIFTY, FINNIFTY, and MIDCAP NIFTY).
Key Benefits for Option Buyers:
It displays live Last Traded Prices (LTP) for 7 key strikes around a reference ATM level: 3 strikes below, the ATM, and 3 strikes above.
Helps buyers prioritize In-The-Money (ITM) strikes, which generally offer higher delta and better probability of profit compared to At-The-Money (ATM) or Out-Of-The-Money (OTM) options.
OTM strike prices are intentionally highlighted in RED color (with smaller font) to visually discourage selection of lower-probability OTM options, encouraging buyers to focus on ITM strikes for safer premium decay and directional plays.
The ATM strike is prominently highlighted for quick reference.
Real-time spot price is used to identify the true ATM, ensuring the dashboard reflects current market conditions.
This tool promotes disciplined strike selection by making it easy to spot premium levels across relevant strikes, reducing the risk of overpaying for OTM options with low intrinsic value.
How to Use:
Apply the indicator to any chart (preferably the underlying index chart, e.g., NSE:NIFTY).
Manual Inputs Required:
Spot Symbol: Choose from NIFTY, BANKNIFTY, FINNIFTY, or MIDCAP.
Strike Interval:
NIFTY: 50
BANKNIFTY: 100
FINNIFTY: 50
MIDCAP NIFTY: 25
Expiry Date: Enter Day (e.g., 23), Month (e.g., 12), Year (e.g., 25) for the target weekly/monthly expiry (format: DD MM YY).
Reference ATM Strike: Manually enter the approximate current ATM strike (e.g., closest strike to spot price). This anchors the 7 strikes displayed.
Customize layout: Dashboard position (e.g., bottom_right) and font size for better visibility.
The dashboard appears as a clean table overlay with columns for CE LTP, Strike, and PE LTP, updated in real-time.
Ideal for intraday or expiry-day option buyers looking to avoid common pitfalls like chasing cheap OTM premiums.
Feel free to use and share — happy trading!
InCrypto WatermarkInCrypto Watermark
A customizable overlay indicator that displays essential trading information directly on your TradingView charts. This tool helps traders quickly access key market data without cluttering the chart interface.
KEY FEATURES:
• Symbol Information: Displays current trading pair and active timeframe
• Price Display: Optional current price with smart precision formatting
• Price Change: Optional price change percentage over 24 bars with color-coded indicators
• Date & Time: Multiple format options for date (DD/MM/YYYY, MM/DD/YYYY, YYYY-MM-DD, DD.MM.YYYY) and time (HH:MM, HH:MM:SS)
• Custom Text: Customizable title and subtitle text
• Full Customization: Adjustable positioning, colors, sizes, alignment, and opacity for all elements
• Visibility Controls: Show/hide individual elements independently
• Background Options: Customizable background color, opacity, and optional borders
SETTINGS:
The indicator is organized into logical groups:
- Text Content: Title and subtitle customization
- Visibility: Individual show/hide controls for each element
- Watermark Position: Flexible placement options
- Symbol Info Position: Separate positioning controls
- Cell Size: Width and height adjustments
- Title/Subtitle/Symbol Info Settings: Color, size, alignment, and opacity controls
- Background Settings: Background color, opacity, and border options
USE CASES:
• Chart branding for trading groups or channels
• Quick reference for essential trading information
• Professional-looking charts for screenshots
• Multi-timeframe analysis assistance
TECHNICAL DETAILS:
• Pine Script v6
• Overlay indicator
• Works on all TradingView-supported markets and timeframes
• Real-time updates
HOW TO USE:
1. Add the indicator to your chart
2. Customize title and subtitle in Text Content settings
3. Adjust positioning for watermark and symbol info sections
4. Enable/disable individual information elements as needed
5. Fine-tune colors, sizes, and opacity to match your chart style
The indicator automatically adjusts price precision based on the asset's price level. Price change is calculated over 24 bars of the current timeframe (not 24 hours).
DISCLAIMER:
This indicator is for informational purposes only. It does not constitute investment advice, financial advice, trading advice, or any other type of advice. Past performance does not guarantee future results. Always conduct your own research and risk management before making trading decisions. Trading involves substantial risk of loss and is not suitable for every investor.
ORB 5 Min Break & Retest + Alerts By Khan 0.1 verORB 5-Minute Break & Retest Indicator
This indicator plots the high and low of the first 5-minute candle of the trading session (Opening Range). It then monitors price for a breakout above or below the ORB levels and triggers an alert when price retests the broken level and holds.
Designed to help identify high-probability ORB continuation setups with clear visual levels and TradingView alerts.
XSP 5 DTE Combo: Safe & AggressiveStrategy Document: XSP 5 DTE Trend-Follower
Objective: Systematic capital growth using weekly XSP (Mini-SPX) Options while maintaining a high-interest cash reserve.
1. The Core Philosophy
The strategy is built on three pillars: Directional Trend Following, Volatility Filtering, and Capital Preservation. Unlike "Buy & Hold," this system only risks capital when the market shows clear momentum. By using XSP Options, we gain leveraged exposure with a defined maximum risk (the premium paid).
2. Capital Management (The 70/30 Rule)
70% Safety Reserve: Held in low-risk, interest-bearing instruments (e.g., US Treasury Bills or Money Market Funds). This acts as a collateral base and generates a steady 4–5% yield, offsetting trading costs and providing a psychological "anchor."
30% Active Trading Capital: Used for purchasing XSP Options.
Scaling: Start with 1 contract. Increase position size by 1 contract for every $10,000 of account growth.
3. Execution Rules
Trading Day: Every Thursday.
Entry Time: 15:30 – 16:00 CET (Wall Street Open).
Instrument: XSP Index Options (Standard Delta 50 / At-The-Money).
Expiration: 5 Days to Expiration (DTE) – typically the following Tuesday.
Exit: Hold to expiration (maximum gain) or close manually at +100% ROI.
Technical Script Description: "ATR Pro Trend Combo"
The Pine Script (v6) serves as a binary gatekeeper. It suppresses trades during low-probability environments and highlights entries during high-conviction trends.
Key Indicators & Logic:
Trend Filter (EMA 50): Determines the "Primary Trend." We only buy Calls if the price is above the 50-period EMA, and Puts if it is below. This prevents trading against the institutional flow.
Momentum Switch (SuperTrend): Acts as a trailing volatility-based confirmation. The script requires the SuperTrend to align with the EMA direction (Green for Calls, Red for Puts).
Volatility Threshold (ATR): Filters out "flat" markets. A trade is only signaled if the current Average True Range (ATR) is at least 80–90% of its long-term average. This ensures there is enough "swing" in the market to overcome the Theta (time decay) of the options.
Seasonal Overlay: An automated hard-stop for January and September, months that historically exhibit high randomness and trend reversals.
Multi-Mode Functionality:
Safe Mode: Uses a tighter 2.0 SuperTrend multiplier and 0.9 ATR threshold. Best for accounts under $15,000 to maximize Capital Preservation.
Aggressive Mode: Uses a 2.5 multiplier and 0.8 ATR threshold. Increases trade frequency to accelerate compounding once a capital buffer is established.
How to use this in TradingView:
Copy the latest code provided into the Pine Editor.
Add to Chart and ensure you are on the Daily (1D) or 4-Hour (4H) timeframe for the best signal quality.
Check the Dashboard on the top right for the current Season and Trend status before executing your Thursday trade.
CGM - Options Trial [Basic] - by ChartGptMarathiCGM - Options Premium Trial - by ChartGptMarathi
Description:
The CGM - Options Premium Trial is the introductory version of the advanced CGM Sniper suite, designed specifically for Option Buyers who need clarity in a chaotic market.
This indicator allows you to plot and compare Call (CE) and Put (PE) option charts simultaneously on a single pane, providing a direct view of premium behavior without switching tabs. It includes essential trend-following tools to help you identify momentum shifts instantly.
Key Features:
Dual Charting: Visualizes both Call and Put option candles on one screen for real-time comparison.
Trend Confirmation: Includes a built-in 8 EMA to gauge short-term momentum.
Volume Analysis: Integrated VWAP (Volume Weighted Average Price) for institutional level tracking.
Spot Tracking: Monitors the underlying Spot symbol (e.g., NIFTY/BANKNIFTY) data for better context.
Visual Clarity: Clean, color-coded candles (Green/Red) with customizable widths and visibility toggles.
How to Use:
Add the indicator to your chart.
In the settings, select your Call (CE) and Put (PE) symbols (e.g., NIFTY24000CE, NIFTY24000PE).
Select the Spot Symbol (e.g., NSE:NIFTY) for underlying data reference.
Use the EMA and VWAP lines to determine trend direction. If the premium price is above both lines, the momentum is bullish for that option.
Disclaimer:
This indicator is for educational and analytical purposes only. It does not constitute financial advice. Trading options involves significant risk. Please perform your own due diligence before executing any trades.
All rights reserved with ChartGptMarathi. For any feedback or support, contact at: chartgptmarathi@gmail.com
Elephant Edge Session Levels Predictor**Elephant Edge** is a robust trading tool designed to streamline decision-making for swing and intraday traders alike. It combines accuracy and simplicity to help you spot promising buy and sell signals with ease. The Session Levels Predictor+ feature draws upper and lower percentile lines derived from session data, enabling traders to pinpoint key support and resistance areas accurately. It computes these percentile projections from daily sessions automatically and displays them as sleek, adjustable lines—perfect for intraday and short-term strategies focused on statistical price boundaries.
For **swing traders**, Elephant Edge highlights pivotal market reversals and trend shifts, allowing you to seize bigger trends and maintain momentum. For **intraday traders**, it offers precise buy and sell thresholds, providing reliable entry and exit cues during active market hours.
No matter if you're chasing quick trades or sustaining positions over several sessions, Elephant Edge promotes a methodical and disciplined strategy. Its smart signals cut through market clutter, delivering a solid advantage while eliminating emotional biases.
With **Elephant Edge**, you shift from merely responding to the market to trading with **precision, assurance, and reliability**.
yon Price Above 200 EMA & RSI < 11The indicator will highlight potential oversold bounce opportunities when price is in an uptrend (above 200 EMA) but temporarily oversold on the RSI-2.
Check on youtube for video that explains the mechanics of Larry Connors' 2-period RSI strategy and how it differs from traditional RSI use, which is essential for applying it to volatile instruments like 0DTE QQQ.
Optimized Options Day Trading Script -Anurag Dec20-2025This indicator is a specialized Multi-Timeframe Trend & Regime System designed specifically for intraday trading on SPY, QQQ, and SPX. It is optimized for high-volatility execution (like 0DTE) by filtering out "choppy" low-probability conditions before they happen.
Unlike standard indicators that only look at the current chart, this script runs a background check on the 15-Minute Timeframe
MyTime Hybrid TargetsThis script, "MyTime Hybrid Targets," is a professional-grade trading system that combines trend-following momentum with advanced liquidity concepts and volatility-adjusted targets. It is designed to provide traders with a high-probability "Institutional-style" framework for scalping or swing trading.
Here is a point-by-point breakdown of the script’s features:
1. 4-Layer Trend Confirmation Engine
The script uses a strict multi-layer filter to ensure you only trade in the direction of the "Strong Trend."
EMA Hybrid: Uses a 13-period and 20-period EMA crossover logic to detect short-term trend direction.
SuperTrend Integration: Filters entries through the SuperTrend algorithm to ensure the price has broken structural resistance/support.
RSI Momentum Filter: Only triggers Buy signals when RSI > 50 and Sell signals when RSI < 50, ensuring positive or negative momentum is present.
2. Smart Liquidity Sweep Logic
Unlike standard indicators that fire on every crossover, this script includes a Liquidity Sweep check:
Institutional "Stop-Hunts": It identifies when the price has swept the 10-bar low (for buys) or the 10-bar high (for sells).
Smart Money Entry: This identifies the "sweep before the move," allowing you to enter where big players are entering, rather than getting caught in the trap.
3. Volatility-Filtered Candle Entries
ATR Strength Gate: Only "Strong Candles" (Marubozu or high-momentum candles) trigger a signal. The candle body must be at least 50% of the recent ATR, filtering out weak, "indecisive" price action and dojis.
4. Triple-Stage Hybrid Profit Targets
The indicator automatically projects three distinct types of profit targets the moment a signal is fired:
T1 - Structural Fibonacci (0.618): Targets the next major structural level based on the recent 20-bar swing high/low. This is your high-probability "Scalp" target.
T2 - Dynamic Zone (1.5x ATR): A volatility-adjusted target that accounts for the current market environment.
T3 - Trend Extension (2.5x ATR): Designed for "Runners" to capture larger trend extensions during high-volatility moves.
5. Clean & Actionable UI
B/S Labels: Large, clear "B" (Buy) and "S" (Sell) labels appear below and above the bars to ensure you never miss an entry.
Multi-Target Dashboard: Floating labels on the chart tell you exactly which target is which (Fib vs. Zone vs. ATR), keeping your chart organized and professional.
Best Use Cases:
Scalping: 1m to 5m timeframes for quick T1/T2 hits.
Intraday/Swing: 15m to 1h timeframes for trend-following moves toward T3.
optionboss1. Dual-Directional Scalping Intelligence
This optionboss is built to identify high-probability Call (CE) and Put (PE) opportunities in real-time. It eliminates guesswork by providing clear "BUY CE" and "BUY PE" labels directly on the candles when the trend is ready to reverse or extend.
2. Proprietary "Dual Space" Logic
The script uses a specialized "Distance-from-Mean" calculation. It only triggers signals when the price is overextended (far from the baseline), ensuring you aren't trading in the "choppy" middle zone. This significantly reduces false signals compared to standard indicators.
3. Automatic T1 Target Projection
Stop wondering where to take profits. The optionboss automatically draws a T1 Target Line the moment a signal appears.
4. Candlestick "Elimination" Verification
The signal logic is based on institutional price action. A "BUY CE" only triggers when a green candle successfully "takes out" the high of a previous red candle at an extreme level, confirming that buyers have seized control.
5. Clean & Stealth Interface
Designed for professional traders who want a clean chart. The core moving averages are hidden behind generic "Sensitivity" settings to protect the strategy’s secrets. You get clear, non-repainting labels that stay fixed once the candle closes.
6. Fully Customizable for All Markets
While optimized for 5-minute scalping, the "Primary" and "Secondary" sensitivity inputs allow you to tune the engine for Nifty, Bank Nifty, Forex, or Crypto.
How to get access:
"This is a private, Invite-Only script. To maintain the quality of the signals and protect the strategy, access is restricted to authorized users. Please message me directly for subscription details and to have your TradingView username added to the access list."
