Şimdi başlat

Volatilite

Smart TrendSmart Trend — TradingView Indicator Documentation © 2026 Arup Sarkar Indicator Name: Smart Trend Version: 1.0 What It Does Smart Trend is a trend detection and momentum analysis indicator for TradingView. It identifies high-probability trend flips, strong momentum moves, volatility expansions, and short-term counter-trend signals. It combines: - Current timeframe trend lines (EMA + SMA) - Higher timeframe EMA context (1H + 4H + Daily) - ATR-based dynamic exits - Volume confirmation Smart Trend is designed to: - Detect trend changes early - Confirm momentum strength - Highlight weakening trends before reversals - Keep charts clean and actionable How It Works 1. Trend Detection: Trend Line (EMA21 + SMA50): represents current trend direction 2. Higher Timeframe EMA (HTF EMA 1H): confirms alignment Trend Conditions: - Uptrend: candle closes above trend line and HTF EMA - Downtrend: candle closes below trend line and HTF EMA - Choppy / Flat: neither uptrend nor downtrend 2. Momentum Strength - Calculated using slope of trend line EMA - Candle colors indicate momentum: * Bullish: green, opacity based on strength * Bearish: red, opacity based on strength * Neutral / Choppy: grey 3. Alerts - Smart Trend sends alerts once per confirmed condition on candle close: - Uptrend Flip (U) — 2-candle confirmation, trend turns bullish - Downtrend Flip (D) — 2-candle confirmation, trend turns bearish - Strong Bullish Momentum — trend up + ATR breakout + volume confirmation - Strong Bearish Momentum — trend down + ATR breakout + volume confirmation - Volatility Expansion — ATR rising - Volatility Expansion After Squeeze — breakout after low-volatility period - Counter-Trend Up — short-term uptrend vs HTF downtrend - Counter-Trend Down — short-term downtrend vs HTF uptrend 4. ATR Dynamic Exits - ATR (Average True Range) over last 50 days is used to calculate dynamic stop levels - Plots longExit and shortExit levels - Helps traders manage risk dynamically based on market volatility 5. Visuals - Trend Line: colored by direction (green/red/gray) - Smoothed 4H+1D EMA: thin orange line for higher timeframe context - Labels: “U” for uptrend flips, “D” for downtrend flips - Counter-trend signals: small triangles above/below bars - ATR exit lines: semi-transparent for clean chart Benefits - Detects trend reversals early - Confirms strong momentum moves - Highlights weakening trends using volume and ATR - Provides dynamic exit levels for risk management - Keeps chart clean and readable - Alerts are actionable and trigger once per pattern confirmation Conclusion Smart Trend is an all-in-one trend and momentum tool for traders who want: - Early detection of trend flips - High-probability momentum signals - Volatility-aware trade management - Minimal visual clutter with maximum actionable insights Smart Trend can be combined with support/resistance levels, higher timeframe analysis, and other indicators to increase confidence and improve trade decisions.
Pine Script® göstergesi
arupnj2018 tarafından
Dynamic Strike Selection Indicator [ARJO]Dynamic Strike Selection Indicator OVERVIEW The Dynamic Strike Selection Indicator is a visual analysis tool designed for traders observing NSE (National Stock Exchange of India) instruments, particularly those interested in options. It displays a trend-based oscillator in the lower chart pane and automatically calculates option strike prices , presenting them in an easy-to-read table. The indicator helps users observe trend changes and understand how option strikes might be selected based on current market conditions. IT has a dashboard that shows you: Where the trend might be heading (through the oscillator) What option strikes align with the current price level When trend transitions occurred CONCEPTS This indicator combines several technical analysis concepts in a beginner-friendly format: 1. Trend Observation (Chandelier Exit) The indicator uses a method called "Chandelier Exit" which observes price volatility to identify potential trend directions. When the indicator shows green, it suggests an upward trend pattern; red suggests a downward pattern. These are reference points, not predictions. 2. Smoothed Price Movement Raw price data can be noisy. This indicator applies mathematical smoothing (called "Ehlers 2-Pole filter") to reduce short-term fluctuations, making it easier to observe the underlying trend direction. 3. Momentum Oscillator The oscillator (displayed as bars and lines in the lower pane) shows the difference between smoothed price and its moving average. Positive values suggest upward momentum; negative values suggest downward momentum . This is similar to how MACD or LBR works. 4. Strike Price Calculation For option traders , the indicator automatically calculates: ATM (At-The-Money): The strike price closest to the current underlying price OTM (Out-of-The-Money): Strike prices at a distance from ATM, based on your settings These calculations use standard rounding methods based on each instrument's official strike interval. FEATURES Visual Components: Color-Coded Oscillator: Green/teal for potential uptrend, purple/red for potential downtrend Histogram Display: Visual bars showing momentum strength Chandelier Exit Lines: Plotted on the main price chart as reference levels Information Table: Displays calculated strikes, timestamps, and optional tracking data Supported Instruments: Major indices: NIFTY, BANKNIFTY Popular stocks: RELIANCE, HDFCBANK, ICICIBANK, INFY, TCS, SBIN, and more Any NSE instrument (using manual strike interval setting) Flexible Configuration: Choose between "Sell Mode" and "Buy Mode" perspectives Customize strike interval for any instrument Adjust sensitivity of trend detection Modify visual appearance (colors, table position, text size) Track entry prices and observe P&L calculations (for reference only) Features: Automatic strike interval detection for predefined instruments Manual override option for custom requirements Real-time option premium fetching (where available) Timestamp recording of trend transitions Active trade highlighting based on current trend HOW TO USE Step 1: Adding the Indicator Open your TradingView chart with an NSE instrument (e.g., NIFTY, BANKNIFTY, or any stock) Search for " Dynamic Strike Selection Indicator " in the Indicators menu Click to add it to your chart You'll see an oscillator appear in a pane below your price chart and a table in the corner Step 2: Basic Settings Click the settings (gear icon) on the indicator. Here are the key settings to understand: Symbol Settings: Symbol Source: Keep it on " Use Chart Symbol " to analyze whatever instrument is on your chart Custom Symbol: Only change if you want to analyze a different instrument while viewing another chart Expiry Date: Set the expiry date of the option contracts you're observing Use the dropdown menus for Day, Month, and Year Example: For 30th January 2025, select Day: 30, Month: 01, Year: 25 Trade Entry (Optional): Trade Mode: Choose "Sell" or "Buy" based on your observation perspective Lot Size: Enter your intended lot size for P&L calculation reference PUT/CALL Entry Price: Manually enter prices if you want to track reference P&L OTM Strike Distance: Default is 4 (means 4 strikes away from ATM) Increase for further OTM strikes, decrease for closer strikes Step 3: Understanding the Display The Oscillator (Lower Pane): Green/Teal Bars: Suggest bullish momentum characteristics Purple/Red Bars: Suggest bearish momentum characteristics Zero Line: The reference point - above suggests strength, below suggests weakness Color Change: When the oscillator changes from red to green (or vice versa), it indicates a potential trend transition Active Row Highlighting: In Sell Mode: Green background on PUT row during uptrend, Red background on CALL row during downtrend In Buy Mode: Green background on PUT row during downtrend, Red background on CALL row during uptrend This helps you observe which strike aligns with the current trend direction Visual Customization: Change oscillator colors under "Color Settings" Adjust table position, size, and transparency under "Table Settings" Modify table colors to match your chart theme NOTES FOR BEGINNERS Start Simple: Use default settings first. Don't change too many parameters initially. Paper Trade First: Observe the indicator for several days before considering any real trades. Note how often trend transitions occur and how strikes align. Understand Your Instrument: Know the strike interval for your chosen stock/index. NIFTY/BANKNIFTY use 100, most stocks use 10, 20, or 50. Timeframe Matters: The indicator behaves differently on different timeframes. A 5-minute chart will show more transitions than a 1-hour chart. Use with Other Analysis: This indicator is one tool among many. Combine with price action, support/resistance, and volume analysis. Don't Chase: Just because a transition occurs doesn't mean you must act. Observe the quality of the move. Backtest Observations: Use TradingView's replay feature to observe how the indicator performed historically. CONCLUSION The Dynamic Strike Selection Indicator serves as an educational tool for observing trend-based oscillator patterns and understanding how option strikes might be mathematically selected based on current market conditions. It combines visual trend analysis with structured strike price calculations, helping users study the relationship between momentum patterns and option strike references. The indicator is designed to enhance chart interpretation skills and provide transparency into strike selection methodologies. It does not predict future price movements or guarantee any outcomes. Users are encouraged to use it as one component of a broader analytical approach, always conducting independent research and maintaining realistic expectations about market analysis tools. DISCLAIMER This indicator is strictly for educational and analytical observation purposes. It is NOT a trading system, signal generator, or financial advisory service. What This Indicator Does NOT Do: Does not predict future price movements with certainty Does not guarantee profitable trades or outcomes Does not constitute financial, investment, or trading advice Does not replace the need for independent research and analysis Does not eliminate trading risks or ensure success What You Must Understand: All calculated strikes, P&L values, and trend observations are informational references only Option trading involves substantial risk and can result in complete loss of invested capital Past indicator performance does not predict future results Trend transitions shown are historical observations, not predictions The "active" highlighting is a visual reference tool, not a trade recommendation Conduct thorough independent research before taking any trading decision. and consult qualified, licensed financial professionals for personalized advice. The creator of this indicator is not a registered investment advisor, broker, or financial planner. This tool is provided "as is" without warranties of any kind. By using this indicator, you acknowledge that you understand these risks and limitations, and you agree that all trading decisions and their consequences are solely your responsibility. If you do not fully understand these risks or are unsure about options trading, do not use this indicator for live trading .
Pine Script® göstergesi
ARJO_2019 tarafından
[CodaPro] Multi-Timeframe RSI Dashboard v1.1 v1.1 Update - Fixed Panel Positioning After initial release, I realized the indicator was displaying overlayed on the price chart instead of in its own panel. This has been corrected! Changes: - Fixed: Indicator now displays in separate subpanel below price chart (much cleaner!) - Improved: 5min and 1H RSI lines are now bold and prominent for easier reading - Improved: 15min, 4H, and Daily lines are subtle/transparent for context - Updated: Default levels changed to 40/60 (tighter, high-conviction signals) - Updated: All 5 timeframes now active by default (toggle any off in settings) Thanks for the patience on this quick fix! The indicator should now display properly in its own panel below your price chart. If you were using v1.0, please remove it from your chart and re-add the updated version. Happy trading! Multi-Timeframe RSI Dashboard This indicator displays RSI (Relative Strength Index) values from five different timeframes simultaneously in a clean dashboard format, helping traders identify momentum alignment across multiple time periods. ═══════════════════════════════════════ FEATURES ✓ Displays RSI for 5 customizable timeframes ✓ Color-coded status indicators (Oversold/Neutral/Overbought) ✓ Clean table display positioned in chart corner ✓ Fully customizable RSI length and threshold levels ✓ Works on any instrument and timeframe ✓ Real-time updates as price moves ✓ Smart BUY/SELL signals with cooldown system ✓ Non-repainting - signals never disappear after appearing ═══════════════════════════════════════ HOW IT WORKS The indicator calculates the standard RSI formula for each selected timeframe and displays the results in both a graph and organized table. Default timeframes are: - 5-minute - 15-minute - 1-hour - 4-hour (optional - hidden by default) - Daily (optional - hidden by default) Visual Display: - Graph shows all RSI lines in subtle, transparent colors - Lines don't overpower your price chart - Dashboard table shows exact values and status Color Coding: - GREEN = RSI below 32 (traditionally considered oversold) - YELLOW = RSI between 32-64 (neutral zone) - RED = RSI above 64 (traditionally considered overbought) All timeframes and thresholds are fully adjustable in the indicator settings. ═══════════════════════════════════════ SIGNAL LOGIC BUY Signal: - Triggers when ALL 3 primary timeframes drop below the buy level (default: 32) - Arrow appears near the RSI lines for easy identification - 120-minute cooldown prevents signal spam SELL Signal: - Triggers when ALL 3 primary timeframes rise above the sell level (default: 64) - Arrow appears near the RSI lines for easy identification - 120-minute cooldown prevents signal spam The cooldown system ensures you only see HIGH-CONVICTION signals, not every minor fluctuation. ═══════════════════════════════════════ SCREENSHOT FEATURES VISIBLE - Multi-timeframe RSI lines (5min, 15min, 1H) in subtle colors - Smart BUY/SELL signals with cooldown system - Real-time dashboard showing current RSI values - Clean, professional design that doesn't clutter your chart ═══════════════════════════════════════ DEFAULT SETTINGS - Buy Signal Level: 32 (all 3 timeframes must cross below) - Sell Signal Level: 64 (all 3 timeframes must cross above) - Signal Cooldown: 24 bars (120 minutes on 5-min chart) - Active Timeframes: 5min, 15min, 1H (4H and Daily can be enabled) - RSI Length: 14 periods (standard) ═══════════════════════════════════════ CUSTOMIZABLE SETTINGS - RSI Length (default: 14) - Oversold Level (default: 32) - Overbought Level (default: 64) - Buy Signal Level (default: 32) - Sell Signal Level (default: 64) - Signal Cooldown in bars (default: 24) - Five timeframe selections (fully customizable) - Toggle visibility for each timeframe - Toggle dashboard table on/off - Toggle arrows on/off ═══════════════════════════════════════ HOW TO USE 1. Add the indicator to your chart 2. Customize timeframes in settings (optional) 3. Adjust RSI length and threshold levels (optional) 4. Monitor the dashboard for multi-timeframe alignment INTERPRETATION: When multiple timeframes show the same condition (all oversold or all overbought), it can indicate stronger momentum in that direction. For example: - Multiple timeframes showing oversold may suggest a potential bounce - Multiple timeframes showing overbought may suggest potential weakness However, RSI alone should not be used as a standalone signal. Always combine with: - Price action analysis - Support/resistance levels - Trend analysis - Volume confirmation - Other technical indicators ═══════════════════════════════════════ EDUCATIONAL BACKGROUND RSI (Relative Strength Index) was developed by J. Welles Wilder Jr. and introduced in his 1978 book "New Concepts in Technical Trading Systems." It measures the magnitude of recent price changes to evaluate overbought or oversold conditions. The RSI oscillates between 0 and 100, with readings: - Below 30 traditionally considered oversold - Above 70 traditionally considered overbought - Around 50 indicating neutral momentum Multi-timeframe analysis helps traders understand whether momentum conditions are aligned across different time horizons, potentially providing more robust signals than single-timeframe analysis alone. ═══════════════════════════════════════ NON-REPAINTING GUARANTEE This indicator uses confirmed bar data to prevent repainting: - All RSI values are calculated from previous bar's close - Signals only fire when the bar closes (not mid-bar) - What you see in backtest = what you get in live trading - No signals will disappear after they appear This is critical for reliable trading signals and accurate backtesting. ═══════════════════════════════════════ VISUAL DESIGN PHILOSOPHY The indicator is designed with a "less is more" approach: - Transparent RSI lines (60% opacity) keep price candles as the focal point - Thin lines reduce visual clutter - Arrows positioned near RSI levels (not floating randomly) - Background flashes provide extra visual confirmation - Dashboard table is compact and non-intrusive The goal is to provide powerful multi-timeframe analysis without overwhelming your chart. ═══════════════════════════════════════ TECHNICAL NOTES - Uses standard request.security() calls for multi-timeframe data - Non-repainting implementation with proper lookahead handling - Minimal performance impact - Compatible with all instruments and timeframes - Written in Pine Script v6 ═══════════════════════════════════════ IMPORTANT DISCLAIMERS - This is an educational tool for technical analysis - Past RSI patterns do not guarantee future results - No indicator is 100% accurate - Always use proper risk management - Consider multiple factors before making trading decisions - This indicator does not provide buy/sell recommendations - Consult with a qualified financial advisor before trading ═══════════════════════════════════════ LEARNING RESOURCES For traders new to RSI, consider studying: - J. Welles Wilder's original RSI methodology - RSI divergence patterns - RSI in trending vs ranging markets - Multi-timeframe analysis techniques ═══════════════════════════════════════ Disclaimer This tool was created using the CodaPro Pine Script architecture engine — designed to produce robust trading overlays, educational visuals, and automation-ready alerts. It is provided strictly for educational purposes and does not constitute financial advice. Always backtest and demo before applying to real capital.
Pine Script® göstergesi
ArisCodes tarafından
1
BBW Advanced (Percentiles & Regime)Bollinger BandWidth Advanced (Percentiles & Regime) Description This indicator is an advanced implementation of Bollinger BandWidth (BBW) focused on volatility regimes, not trade signals. Unlike the standard BBW, which relies on fixed thresholds or recent highs/lows, this version uses statistical percentiles and normalization to adapt automatically to different assets and timeframes. Its purpose is to identify abnormal volatility compression and expansion and, more importantly, the transitions between regimes. Key Improvements Over Standard BBW 1. Percentile-based thresholds Instead of arbitrary levels, BBW is evaluated relative to its own historical distribution: Low percentile (e.g. 5th) → extreme compression High percentile (e.g. 95th) → extreme expansion This makes the indicator adaptive and statistically meaningful across markets. 2. Volatility normalization BBW is normalized by its own historical mean, allowing comparison across: Different instruments Different timeframes A normalized value around 1 represents “normal” volatility for that market. 3. Regime classification instead of signals The indicator does not generate buy/sell signals. It classifies the market into volatility regimes and highlights regime transitions, which must be interpreted together with price structure. How to Interpret the Indicator Blue Line – BBW Raw Bollinger BandWidth value. Represents relative volatility only. Not a trading trigger. Green Line – Low Percentile (Extreme Compression) Marks statistically rare low-volatility conditions. Price is compressed; energy is building, but direction is unknown. Red Line – High Percentile (Extreme Expansion) Marks unusually high volatility. Often associated with breakouts, trends, or late-stage moves. Orange Line – Normalized BBW Shows current volatility relative to its historical average: Below ~0.7 → very low volatility Around 1.0 → normal volatility Above ~1.5 → unusually high volatility Background Colors Green background → BBW is below the low percentile (extreme compression) Red background → BBW is above the high percentile (extreme expansion) Background colors indicate market state, not entries. Practical Use Extreme compression highlights environments where breakouts may develop, but does not predict direction The most useful moment is the exit from compression, when volatility starts expanding again Always combine with price action, structure, and context BBW should be treated as a condition filter, never as a standalone strategy Important Notes This indicator measures volatility only, not trend or bias Compression does not guarantee a breakout Expansion does not guarantee continuation Misuse as a signal generator will lead to poor results
Pine Script® göstergesi
danavillanueva tarafından
[RoyalNeuron] Supertrend [Medusa v1.0]Hey everyone, 👋 This is Medusa Supertrend v1.0. Proper Supertrend logic using ATR with trend continuation rules. Optimized default settings for BTC 30 minute charts, but fully adjustable to you liking. Optional BUY and SELL labels only when the trend actually flips Soft trend highlighting so you can see regime shifts without blinding your chart Quick way to use it: Green Supertrend with bullish fill means bias stays long and you look for continuation setups Red Supertrend with bearish fill means bias stays defensive or short. BUY and SELL labels mark trend changes. It works best when combined with momentum or volume tools like WidowMaker to time entries with the trend instead of fighting it. Use it, break it, tell me what you’d improve. More Medusa iterations and free tools coming. Cheers, RoyalNeuron 👑 Supertrend, Trend, ATR, Directional Bias, Buy Sell, Bitcoin, BTC, Clean Charts. Free, Alerts
Pine Script® göstergesi
RoyalNeuron tarafından
[CT] MoBo BandsThis script is the TradingView Pine Script version of MoBo Bands, the Momentum Breakout indicator, and the original creator credited in the code is NPR21, who also notes it was based on an original Thinkorswim concept and then modified and converted to Pine Script by NPR21. At its core, MoBo Bands is a volatility envelope built from a simple moving average and standard deviation, but it’s not meant to be used like a normal Bollinger Band “touch = reversal” tool. It’s designed to identify when price has pushed far enough away from its recent average to qualify as a breakout regime, and then to keep you biased in that regime until a true opposite breakout occurs. The indicator calculates a midline using a simple moving average of your chosen price source over the selected length. It then measures how spread out price has been over that same lookback using standard deviation. From there it builds an upper and lower band by taking the midline and adding or subtracting a user-defined multiple of standard deviation. In this script those multipliers are “Num Dev Up” and “Num Dev Down.” They default to ±0.8, which is tighter than traditional Bollinger settings, meaning the bands are closer to price and the indicator is more willing to declare a breakout state. The “Displace” input simply shifts the plotted bands forward or backward by bars for visual alignment; functionally, the breakout comparisons are being made against the displaced band values, so if you use displacement you are intentionally changing where signals occur in time. The key concept in MoBo is that it separates “where price is right now” from “what state we are in.” First it assigns a raw status called MoboStatus: if the close is above the upper band it becomes bullish breakout state, if the close is below the lower band it becomes bearish breakout state, and if the close is between the bands it is neutral. If the script stopped there, you’d only see signals on the exact bars that closed outside the bands. Instead, it adds a second layer called BreakStatus, which is a persistent regime variable. BreakStatus changes only when a true breakout happens, and it does not reset to neutral when price returns inside the bands. That is the entire purpose of the “recursion” line: once BreakStatus flips bullish, it stays bullish through the inside-band chop until a bearish breakout flips it the other way, and vice versa. This is why the band colors and the band fill behave the way they do. When BreakStatus is bullish, the bands plot green and the filled area between them is green. When BreakStatus is bearish, the bands plot red and the fill becomes red. If price is simply oscillating inside the bands, BreakStatus stays whatever it last was, which is the whole “stay with the breakout bias” philosophy. Because of that design, the most straightforward way to trade it is to treat MoBo as a regime/bias indicator first, and an entry tool second. A bullish regime begins when you get a bullish breakout condition, meaning you had a close above the upper band and BreakStatus flips to bullish. In this script that flip is also where the “Break Out” arrow prints. That event is telling you volatility expansion has pushed price into an upside breakout state, so your default expectation becomes continuation or at least holding above the midline with higher odds of higher highs. A common execution approach is to take the breakout as your initial trigger, then use the band structure to manage the trade: if you want a more aggressive style, you enter on the breakout bar close or on the next bar if it confirms. If you want a more conservative style, you wait for the first pullback after the breakout and enter when price holds above the midline or reclaims the upper band area. Your risk can be framed in a few ways depending on instrument and timeframe: the most “indicator-pure” protective logic is that the bullish regime is invalidated only when price later breaks below the lower band and flips BreakStatus bearish. That is a very wide stop concept, but it reflects the indicator’s intent to ride trends. A tighter, more practical stop for active trading is to use the midline or a recent swing low as the risk point while still respecting the MoBo bias; the idea is you are using MoBo to keep you from fading the move, while your stop is based on structure rather than waiting for a full opposite breakout. A bearish regime is the exact mirror. It begins when a close is below the lower band and BreakStatus flips bearish, which is when the red “Break Down” arrow prints. From that point, you treat rallies into the midline/band area as potential short opportunities as long as the regime remains bearish. More aggressive traders will short the initial breakdown; more conservative traders wait for a bounce that fails back below the midline or for a retest of the lower band zone. Exits can be handled either as “regime exits,” meaning you hold until BreakStatus flips the other way, or as “trade exits,” meaning you scale or exit into targets while staying aligned with the regime until it ends. On trend days, the regime exit can keep you in the move much longer than typical oscillators. On choppy days, a tighter risk plan is needed because a tight band setting can flip more often. The candle coloring addition you asked for simply mirrors the fill state so you can read the regime without looking at the bands. When the fill is green (BreakStatus bullish), the candles are tinted green; when the fill is red (BreakStatus bearish), the candles are tinted red; when neither fill is active, it leaves the candles unchanged. This doesn’t change the logic or signals, it just makes the “state” visually obvious. Where traders usually get the most out of MoBo is by using it in the context it was designed for: volatility expansion and trend participation. If you try to trade it like a mean-reversion Bollinger Band system, you’ll often do the opposite of what it’s signaling. Here, a close outside the band is not “overbought/oversold,” it’s the condition that defines a breakout regime. The best trades tend to come when the breakout occurs in alignment with a higher-timeframe trend or after a compression period, because the band break is then capturing a genuine shift in volatility and direction. If you want it to trigger fewer, higher-quality regimes, increase the length and/or increase the deviation multipliers, because that widens the envelope and demands a more significant move to flip state. If you want earlier, more frequent signals, reduce the length and/or reduce the multipliers, understanding you’ll also increase whipsaw risk.
Pine Script® göstergesi
ChaosTrader63 tarafından
1
3 EMA with AlertsThis indicator plots three key EMAs (20, 50, and 200) directly on the chart, making it easy to track short-, medium-, and long-term trends. A color-coded table is displayed in the top-right corner for quick reference. -> YOU CAN CHANGE EMA VALUE ACCORDING YOUR TRADING STYLE. The script also includes smart alerts that trigger only when the state changes: • FAST EMA crossing above MEDIUM AND SLOW EMA → Bullish signal • FAST EMA crossing below MEDIUM AND SLOW EMA → Bearish signal This tool is designed for traders who want clean visuals, reliable alerts, and simplified trend recognition.
Pine Script® göstergesi
yb_lunagariya tarafından
Profit Punch: Risk & Target Planner (ATR + Fixed R)Profit Punch: Risk & Target Planner (ATR + Fixed R) This indicator is a complete trade planning tool designed to visualize your Risk (R) and Reward levels instantly. Whether you use a volatility-based strategy (ATR) or precise manual levels, this tool draws your roadmap directly on the chart. It solves the problem of calculating "R-Multiples" manually and ensures every trade plan is consistent. Key Features 1. Smart Risk Calculation Auto Mode (ATR): Uses the stock's daily volatility (ATR) to automatically suggest a logical Stop Loss. Manual Mode: Lets you type in your exact Stop Loss price (e.g., below a recent low), and the tool automatically adjusts your Profit Targets to match that specific risk. 2. Hybrid Targeting (The "Nuance") You can set a tight manual stop but keep your profit targets based on daily volatility (ATR). This allows for "Hybrid" setups where you risk a small amount (tight stop) but aim for a standard volatility move (ATR targets). 3. Backtesting Friendly Use the "Target Date" feature to apply the tool to any past candle. It will calculate the targets based on what the volatility was on that specific day , allowing you to accurately review past trades. 4. Clean & Customizable Editable Labels: Rename "1R" to "Goal 1" or "Take Profit". Clean Look: Toggle any line on/off to keep your chart simple. Timeframe Independent: Calculations are always anchored to Daily data for consistency, even if you are viewing a 5-minute chart. How to Use Step 1: Add to Chart. The lines will appear on the latest bar by default. Step 2: Set Entry. In Settings, check "Use Manual Entry" to type your exact buy price, or leave unchecked to use the closing price. Step 3: Set Stop. Choose "Auto (ATR)" for a volatility-based stop, or "Manual Price" to type in your specific stop level. Step 4: Visualize. The tool draws your 1R, 3R, 5R, and 7R targets instantly. Settings Guide Risk Factor: Multiplier for the ATR calculation (Default is 1.5). Target Base: Choose whether profit targets are multiples of your Stop Distance (Classic) or Fixed ATR (Volatility). Custom Labels: Change the text displayed on the chart (e.g., "Safe Exit" instead of "1R"). Who is this for? This tool is built for swing traders, educators, and anyone who uses "R-Multiples" (Risk Units) to manage their portfolio. It is especially useful for creating consistent trade plan screenshots.
Pine Script® göstergesi
vssebuyungo tarafından
5
Smart Auto-Step Open (1H Base)The "Big Brother" to the 15m Open: While the 15m Open is perfect for scalping entries, this indicator is designed for Trend Direction & Bias. It automatically identifies the major Hourly and Daily opening levels, giving you the "Big Picture" context instantly. 🧠 Smart Auto-Step Logic: This script detects your timeframe and automatically upgrades the level to the next major resistance: Intraday Mode (1s – 1H): Locks to the 1-Hour Open. This is your primary "Bull/Bear" line for the session. Swing Mode (4H): Automatically switches to the 4-Hour Open. Daily Mode (D): Automatically switches to the Daily Open. Noise Filter: Hides automatically on intermediate frames (like 2H or 3H) to keep your chart clean. ✨ Luxury Visuals: Floating Labels: No ugly boxes. Text floats cleanly in the right-side margin. Custom Typography: Includes a "Luxury" setting that uses Bold Serif Unicode characters (e.g., 𝟏𝐇 𝐎𝐩𝐞𝐧) for a high-end, institutional look. Dark Mode Optimized: Defaulted to Bright White for maximum contrast. 🚀 Key Features: Zero-Lag Anchor: Uses time-based coordinates to ensure the line never repaints. Smart Visibility: Works perfectly even if you are viewing the 1H chart itself (prevents the "disappearing line" bug). Price Tags: Displays the exact price with a $ symbol. PRO Strategy (The "Confluence" Setup): Load this indicator together with the "15m Open" version. When Price is above the 15m Open AND the 1H Open → Strong Buy Signal. When Price is below both → Strong Sell Signal. Settings: Font Style: Modern, Luxury, or Hacker. Offset: Move the label right/left. Color: Fully customizable.
Pine Script® göstergesi
DOLLARROO tarafından
ATR Levels - Current Candle Open [MTF]a further improvement from the first version of the script. My intent is to look at 4H ATR levels meanwhile being on 5m or 1m. Let me know if you have any questions or any suggestions to improve. Multi-Timeframe Support Anchor to any timeframe (e.g., 240 for 4H, D for Daily) Leave blank to use chart's timeframe ATR Levels 24 configurable levels (0.5 - 12.0 ATR) 4 groups for easy management Bull color (default: teal) / Bear color (default: orange) Adjustable line width Optional level labels Levels start at current HTF candle open, extend right Live Extension Display NOW row shows real-time UP/DN extension in ATR units Updates as price moves within current HTF candle Anchor Marker Line + crosshair at current HTF open Configurable colors (label bg, text, line) Adjustable label offset (0-100 bars) Statistics Table REACH / REACT / REACT % for levels 0.5-3.0 ATR Color-coded: green ≥50%, orange 30-50%, red <30% Position: bottom-right Size: Normal/Large/Huge
Pine Script® göstergesi
timkamazik tarafından
ATR Levels - Previous Candle Open [MTF]a further improvement from the first version of the script. My intent is to look at 4H ATR levels meanwhile being on 5m or 1m. Let me know if you have any questions or any suggestions to improve Multi-Timeframe Support Anchor to any timeframe while viewing on a different chart timeframe Examples: View 4H ATR levels on 5m chart (set to 240), Daily on 1H (D), etc. Leave blank to use chart's timeframe ATR Levels 24 configurable levels from 0.5 to 12.0 ATR (in 0.5 increments) Organized in 4 groups for easy management Separate bull/bear colors Adjustable line width Optional level labels Previous Candle Zone Visual background box showing previous HTF candle's high-low range Configurable zone color and transparency Toggle on/off Extend Levels Setting 0 = Levels end exactly where previous candle closed -1 = Extend infinitely to the right 1-500 = Extend specific number of bars beyond candle close Anchor Marker Horizontal line + vertical crosshair at anchor point Configurable label background, text color, and line color Adjustable label offset (0-100 bars) Line extends to meet the label Statistics Table Tracks REACH (times price hit level) and REACT (times price reversed) REACT % color-coded: green ≥50%, orange 30-50%, red <30% Based on HTF candle data (100 bars) Configurable table size (Normal/Large/Huge) Positioned top-right
Pine Script® göstergesi
timkamazik tarafından
Bollinger BandWidth With AlertsBollinger BandWidth (BBW) + Compression/Exhaustion Alerts This indicator plots Bollinger BandWidth (BBW) to help you identify volatility regimes: when the market is compressing (coiling) vs expanding (in price discovery). What it shows BBW (Blue): Current Bollinger BandWidth as a % of the basis (SMA). Highest Expansion (Red): The highest BBW value over the last N bars (lookback). Lowest Contraction (Green): The lowest BBW value over the last N bars (lookback). Key Features ✅ Compression Detection Triggers when BBW is near the Lowest Contraction line (volatility squeeze / balance phase). ✅ Exhaustion / Peak Expansion Detection Triggers when BBW is near the Highest Expansion line (strong expansion / potential late-stage move). ✅ Configurable “Near Zone” Thresholds Use: Near Lowest Contraction (%) → how close BBW must be above the contraction extreme Near Highest Expansion (%) → how close BBW must be below the expansion extreme Alerts Included BBW Compression (Near Lowest Contraction) BBW Exhaustion (Near Highest Expansion) Alerts are designed to be used with “Once per bar close” to avoid noise during bar formation. How to use (simple) Compression alert (C): Start watching for breakout / value setups (market is coiling). Exhaustion alert (E): Be cautious chasing moves; watch for transitions or rebalancing. Inputs BB Length, Source, StdDev Expansion/Contraction lookback length (hidden by default) Near-zone thresholds for compression/exhaustion alerts
Pine Script® göstergesi
VolumeDeltaTrader tarafından
Volume Ratio [MIT]Core Logic: This indicator splits each bar's volume into "Buy Volume" and "Sell Volume" based on the relationship between close and open price, then calculates the rolling ratio of cumulative buy volume to sell volume over the past n bars, helping traders gauge short-term buying vs. selling pressure. Volume Split Rules: Bull bar (close > open): All volume assigned to Buy Bear bar (close < open): All volume assigned to Sell Flat bar (close == open): Handled by the "Flat bar volume" setting: Split 50/50 (default): 50% Buy + 50% Sell Ignore: Volume discarded (0 Buy, 0 Sell) All to Buy: All volume to Buy All to Sell: All volume to Sell Calculation: buySum = rolling sum of buy volume over last n bars sellSum = rolling sum of sell volume over last n bars Ratio = buySum / sellSum (na when sellSum = 0) Ratio > 1: Buying pressure dominates (red line) Ratio < 1: Selling pressure dominates (green line) Visual Elements: Green line: Rolling Buy Volume (n bars) – optional Red line: Rolling Sell Volume (n bars) – optional Colored line: Buy/Sell Ratio (red when >1, green when <1) Horizontal line at 1.0: Neutral balance level Typical Trading Use Cases: Trend Confirmation: Ratio persistently > 1.2–1.5 while price rises → strong bullish confirmation Divergence: Price makes higher high but ratio declines → potential top divergence Breakout Filter: Breakout with rapidly rising ratio → higher probability breakout Range Market Avoidance: Ratio oscillating between 0.8–1.2 → avoid choppy entries Crypto Day/Swing Trading: Commonly used on 5m–1h charts, combined with price action or order flow 核心逻辑： 该指标基于K线的收盘价与开盘价的关系，将每根K线的成交量（volume）拆分为“买入量”（Buy Volume）和“卖出量”（Sell Volume），然后计算过去n根K线的累计买入量与卖出量的比率（Buy/Sell Ratio），用来判断短期内买卖力量的相对强弱。 成交量拆分规则： 阳线（close > open）：全部成交量计入买入量 阴线（close < open）：全部成交量计入卖出量 平线（close == open）：根据“Flat bar volume”参数处理： Split 50/50（默认）：平分50%买入 + 50%卖出 Ignore：忽略该K线（都不计） All to Buy：全部算买入 All to Sell：全部算卖出 计算方式： 滚动窗口n根K线内的累计买入量（buySum）和卖出量（sellSum） 比率 = buySum / sellSum（当sellSum=0时显示na） 比率 > 1：买入力量占优（红色） 比率 < 1：卖出力量占优（绿色） 图表显示： 绿色柱线：过去n根的累计买入量（可选显示） 红色柱线：过去n根的累计卖出量（可选显示） 彩色折线：买入/卖出比率（>1红色，<1绿色） 水平线1.0：平衡线（比率=1） 典型使用场景： 趋势确认：比率持续 > 1.2~1.5 且价格上涨 → 强势多头确认 背离信号：价格创新高但比率持续下降 → 潜在顶部背离 放量突破：突破关键位时比率同步快速拉升 → 突破有效性更高 震荡市过滤：比率在0.8~1.2区间反复震荡 → 避免频繁交易 币圈短线：常用于5分钟~1小时图，配合价格结构或订单流使用
Pine Script® göstergesi
MITAlphaLibrary tarafından
Trend Strength [OmegaTools]Trend Strength is a quantitative regime oscillator designed to measure directional pressure and trend quality by blending price structure, return-dependence, realized intrabar expansion, and volume participation into a single normalized signal. The goal is not to predict, but to classify market state: when price action is in an expansionary/distributionary phase versus when it is in a contractionary/accumulation phase, so you can align execution and risk with the prevailing environment. Core concept and methodology The indicator aggregates four components computed on stable rolling windows and mapped into comparable ranges: 1. Price location / structural positioning (100-bar range) A normalized price-location metric (position of close within the rolling high–low range) is transformed into a non-linear “strength” profile. This emphasizes meaningful departures from the middle of the range and penalizes indecision, producing a structure-aware contribution rather than a raw oscillator. 2. Return-dependence / directional persistence (100 bars) A correlation term measures the relationship between the current return (close − close ) and the prior price level (close ). This helps detect environments where movement is more persistent or more mean-reverting, providing a statistical component that complements pure price-location signals. 3. Realized expansion / volatility proxy (50-bar accumulation, 300-bar normalization) Intrabar expansion is approximated via the absolute candle body relative to the full range, aggregated over a short window to represent realized “effort” and then normalized over a longer window. This captures whether price is moving with meaningful body expansion versus compressing and stalling. 4. Volume participation (11-bar accumulation, 300-bar normalization) A rolling volume sum is normalized over a longer window to quantify participation. This helps separate “thin” moves from moves supported by broader activity, without relying on exchange-specific volume assumptions. The final oscillator is a weighted blend of these four normalized components, scaled for readability. The output is intentionally centered around two actionable regimes rather than a symmetric overbought/oversold framework. How to read the oscillator Trend Strength is designed around two main thresholds: - Distribution / Expansion regime (oscillator above 0) When the oscillator is above 0, the market is classified as being in a higher-pressure expansion regime. This often corresponds to directional continuation potential, stronger impulse behavior, and reduced suitability for tight mean-reversion tactics. - Accumulation / Contraction regime (oscillator below −1.3) When the oscillator is below −1.3, the market is classified as being in a contraction/accumulation regime. This frequently corresponds to compression, rotation, and lower directional efficiency, where breakouts may be more fragile and mean-reversion tactics may be more appropriate (depending on instrument and session conditions). Values between 0 and −1.3 are treated as transitional/neutral, where the market is not clearly committing to either regime. Continuous Mode vs Standard Mode Trend Strength includes an optional Continuous Mode to improve interpretability during regime transitions: - Standard Mode colors only when the oscillator is firmly in one of the two regimes (above 0 or below −1.3). Neutral zones remain uncolored, keeping the display conservative. - Continuous Mode adds persistence logic: once a regime is confirmed, intermediate values are rendered with a lighter shade of the last confirmed regime until the opposite regime is confirmed. This reduces visual noise, helps maintain a consistent directional bias framework, and is particularly useful for intraday execution and session trend management. Visual design and bar coloring The oscillator line is color-coded: - Purple: distribution / expansion regime - Orange: accumulation / contraction regime Neutral/transitional values are displayed in grey (or lightly shaded in Continuous Mode based on last confirmed regime). Optionally, the indicator can color price bars using the same regime logic, allowing rapid at-a-glance regime recognition directly on the chart. Practical use cases - Regime filter for strategies: enable trend-following logic only in expansion regimes; enable mean-reversion or range logic in contraction regimes. - Risk adjustment: increase/decrease position sizing or tighten/widen stops based on regime classification. - Confirmation layer: combine with structure tools (market structure, VWAP, key levels) to validate whether conditions support continuation or imply compression. - Session management: identify when a session is behaving as a trend day versus a rotational day, improving trade selection and reducing overtrading. Notes Trend Strength is a regime classifier and contextual tool. It does not guarantee future direction and should be integrated into a complete decision process (risk management, market structure, session context, and instrument-specific behavior). © OmegaTools
Pine Script® göstergesi
OmegaTools tarafından
2
GRA/Rei BRIA Simple [ReiConcept]BRIA SIMPLE - 22 Indicators Buy/Sell Signals Get clear BUY and SELL signals based on the consensus of 22 technical indicators! WHAT DOES IT DO? BRIA Simple analyzes 22 indicators simultaneously and generates signals when a strong majority agrees on the direction. 22 INDICATORS IN 4 CATEGORIES: MOVING AVERAGES (9): SMA, EMA (Short/Medium/Long), DEMA, TEMA, VIDYA MOMENTUM (5): ROC, Momentum, TRIX, Price Oscillator, KST OSCILLATORS (4): RSI, Stochastic, SMI, MACD TREND (4): Parabolic SAR, DMI/ADX, Aroon, Elder Ray HOW IT WORKS? - BUY signal when 75%+ indicators are bullish - SELL signal when 75%+ indicators are bearish - Adjustable threshold (50-95%) - Anti-repainting: signals confirmed at candle close only FEATURES - Clean BUY/SELL labels on chart - EMA fill showing trend direction (cyan = bull, pink = bear) - Bar coloring based on dominant direction - Score table showing current consensus - Built-in alerts for signals SETTINGS - Score Threshold: minimum % of indicators required (default 75%) - EMA Fast/Slow: for trend visualization - Show/Hide table and EMA fill ANTI-REPAINTING All signals are confirmed at candle close only. No repainting, no false signals during live candles. This is a FREE simplified version. For advanced features like trailing stop, TP/SL management, and backtesting, check out BRIA Multi-Score Premium. More tools: reiconcept.fr
Pine Script® göstergesi
ReiConcept tarafından
Sumit' Trade line strategy (4PM-1AM)SUMIT INGOLE This is a custom-built trading indicator designed to help traders identify clear market direction and high-probability entry zones. The indicator focuses on: • Trend direction • Strong price levels • Clear buy and sell signals • Easy-to-read structure It is beginner-friendly and does not require complex market knowledge. The signals are based on pure price behavior and smart market movement, helping traders avoid confusion and overtrading. This indicator works best when used with proper risk management and discipline. It can be applied on multiple timeframes and is suitable for intraday as well as swing trading. Note: This indicator is a support tool, not a guarantee of profits. Always follow your trading plan and manage risk properly.
Pine Script® göstergesi
rahulingole4712 tarafından
Star SMC and Price action [ARule]This script is a Smart Money Concepts (SMC) + Price Action + VWAP + Swing Zones indicator. It detects and draws: ✅ Fair Value Gaps (FVG) ✅ Imbalances (HTF FVG) ✅ BOS / CHoCH (Market Structure) ✅ Internal & Swing Structure ✅ Order Blocks (Internal + Swing) ✅ Equal High / Equal Low (EQH / EQL) ✅ Premium / Discount Zones ✅ Multi-Timeframe High & Low levels ✅ VWAP trend filter ✅ Swing High / Low zones with volume/count filter ✅ Alerts for all major SMC events 👉 Basically: 💎 “All-in-one institutional trading indicator” ✅ 1) HTF FVG / Imbalance System (First Part) This part: Uses multiple higher timeframes: 5m, 15m, 1H, 4H, 1D, 1W Detects imbalance (FVG-like gaps) Draws boxes on chart Marks mitigated zones Adds labels like: 5m, 15m, 1H etc. Logic: An imbalance forms when: current high < previous low (gap down) or current low > previous high (gap up) Then it draws a box 📦 ✅ 2) Mitigation Logic (Very Important) Your script checks when FVG is filled: Options: Wick filled Body filled Half filled None Example: "Wick filled" => low <= imb.open Meaning: 👉 Price touched the FVG → mark as mitigated. ✅ 3) Smart Money Concepts (SMC Core) This huge section detects: 🔹 BOS (Break of Structure) When price breaks previous swing high/low. 🔹 CHoCH (Change of Character) Trend reversal signal. Example: Uptrend → break low → CHoCH bearish Downtrend → break high → CHoCH bullish ✅ 4) Internal vs Swing Structure Internal Structure: Small moves (lower timeframe) Fast signals ⚡ Swing Structure: Major trend structure Strong signals 💪 You can enable/disable both in settings. ✅ 5) Order Blocks (OB) Detected when structure breaks. Two types: 🟢 Bullish OB 🔴 Bearish OB Logic: Script finds last opposite candle before BOS/CHoCH. Then draws OB box 📦 Also checks mitigation: close > OB high → bearish OB broken close < OB low → bullish OB broken ✅ 6) Equal High / Equal Low (Liquidity) Detects liquidity zones: EQH = Equal High EQL = Equal Low Logic: If two highs/lows are close within ATR threshold. Used for: 👉 Liquidity grab / stop hunt zones. ✅ 7) Fair Value Gaps (FVG) – Another System This is separate from HTF imbalance. Condition: currentLow > high → bullish FVG currentHigh < low → bearish FVG Draws 2 boxes per FVG. ✅ 8) Premium / Discount Zones Based on latest swing high & low: Premium zone = top 50% Discount zone = bottom 50% Equilibrium = middle Used in SMC for entries. ✅ 9) Multi-Timeframe High/Low Levels Draws: Previous Day High/Low Previous Week High/Low Previous Month High/Low ✅ 10) VWAP Filter (Your Added Block) You added: VWAP Line vwapValue = ta.vwap(close) Trend Filter Bullish → price above VWAP Bearish → price below VWAP ATM / ITM / OTM logic atm_condition = abs(close - vwap) <= 25 Meaning: ATM = price near VWAP ITM / OTM = based on VWAP direction 💡 This is NOT real option ATM — it's a conceptual filter. ✅ 11) Swing High / Low Zones (Last Part) This part: Detects swing highs & lows using pivot logic Creates zones (boxes) Counts touches or volume inside zone Filters strong zones Example: More touches = stronger support/resistance More volume = institutional interest ✅ What makes this script powerful 💎 It combines: Concept Purpose FVG / Imbalance Institutional gaps BOS / CHoCH Trend change Order Blocks Smart money zones EQH/EQL Liquidity Premium/Discount Entry zones VWAP Trend filter Swing Zones Support/Resistance 👉 This is almost like ICT + SMC + Volume + VWAP hybrid. ✅ If you want, I can help you: I can: ✅ Simplify this script (remove heavy parts) ✅ Add NIFTY / BANKNIFTY option logic ✅ Add Buy/Sell signals ✅ Add scanner (BOS + VWAP + FVG) ✅ Add dashboard table ✅ Optimize performance (reduce lag) ✅ Convert VWAP → real ATM strike logic ✅ Explain any part line-by-line
Pine Script® göstergesi
arulrajadpi tarafından
TTM SqueezeUpdated TTM Squeeze — Correct AND Logic John Carter’s classic TTM Squeeze. There is one on here already, but it is using an OR‑based condition. The proper logic is AND for a true volatility squeeze. Both the Keltner Channel lower band and upper band must sit fully inside the Bollinger Bands. Using AND logic ensures the squeeze only triggers when volatility is genuinely compressed, producing a more accurate and reliable signal than the default implementation.
Pine Script® göstergesi
followmytradingjournal tarafından