Şimdi başlat

Grafik Desenleri

KIRA INVESTORS📈 KIRA MOMENTUM STRATEGY – BUY & SELL Title: KIRA EMA 9–21 + VWAP 🟢 BUY RULE EMA 9 crosses above EMA 21 Price closes above VWAP 🔴 SELL RULE EMA 9 crosses below EMA 21 Price closes below VWAP 🚫 NO TRADE ZONE EMAs tangled Price chopping near VWAP 🎯 TIMEFRAMES & RISK TF: 5–15 min Stop-loss: Swing high / low Risk ≤ 1% per trade 💡 WHY IT WORKS EMA crossover → Trend direction VWAP → Confirms institutional bias Only trades strong momentum moves
Pine Script® göstergesi
kirainvestors tarafından
缠中禅V6Pro"ChanLun" is a highly regarded technical analysis method originating in China. Since its introduction in 2006, ChanLun has quickly gained significant attention and a strong following in the Chinese trading community due to its remarkable ability to navigate complex market dynamics. ChanLun places great emphasis on market structure, price action, momentum, and the intricate interactions between market forces. It recognizes that the market operates in cyclical patterns and aims to capture the underlying structure and rhythm of price movements. Through detailed analysis of the intricate relationship between price and time, it provides traders with a unique perspective on market trends, potential reversals, and key turning points. 🟠 Algorithm 🔵 Step 1: Candlestick Conversion In ChanLun, candlestick analysis pays less attention to the opening/closing prices and wicks, focusing instead on the range that the stock price reaches. Therefore, the first step in ChanLun involves converting each candlestick to include only the high and low prices, ignoring other elements. 🔵 Step 2: Candlestick Standardization In the second step, the converted candlesticks are standardized to ensure strict directional consistency and to eliminate the presence of inner or outer bars. For any two adjacent candlesticks A and B, if one price range completely contains the other, A and B are merged into a new candlestick C. If A is in an uptrend from the previous candlestick, C is defined as High(C) = max(High(A), High(B)) and Low(C) = max(Low(A), Low(B)). If A is in a downtrend from the previous candlestick, C is defined as High(C) = min(High(A), High(B)) and Low(C) = min(Low(A), Low(B)). After completing these steps, when considering any adjacent candlesticks A and B, we can always observe one of the following conditions: 1. High(A) > High(B) and Low(A) > Low(B) 2. High(A) < High(B) and Low(A) < Low(B) The diagram below illustrates how the candlesticks are displayed after this step. 🔵 Step 3: Fractals A "fractal" refers to a pattern formed by three consecutive "normalized" candlesticks, where the middle candlestick shows significantly higher or lower values compared to the surrounding candlesticks. When considering three adjacent candlesticks A, B, and C, we have one of two conditions: 1. High (B) > High (A) and High (B) > High (C) and Low (B) > Low (A) and Low (B) > Low (C) 2。 High (B) < Low (A) and High (B) < Low (C) and Low (B) < Low (A) and Low (B) < Low (C) For In #1 above, we refer to the combination of A, B, and C as the "top fractal", while for #2 we specify it as the "bottom fractal". The image below illustrates all fractals, with the red triangle indicating the top fractal and the green triangle indicating the bottom splitting. 🔵 Step 4: Strokes A "stroke" is a line that connects the top fractal and the bottom fractal, following these rules: 1. There must be at least one "free" candlestick between these fractals, which means it is not part of the top or bottom split. This guarantees that the stroke contains at least five candlesticks from start to finish. 2. The top fractal must have a higher price compared to the bottom fractal. 3. The end fractal should represent the highest or lowest point within the entire stroke range. (There is an option in this indicator to enable or disable this rule.) Brushstrokes enable traders to identify and visualize significant price movements or trends while effectively filtering out minor fluctuations. 🔵 Step 5: Segmentation A "subdivision" is a higher-level line that connects the start and end points of at least three consecutive strokes, reflecting the trend of the current market structure. As new strokes emerge, it continues to extend until there is a break in the market structure. A breakout occurs when an uptrend forms lower highs and lower lows, or when a downtrend forms higher highs and higher lows. It is important to note that within the trading range, the brushstrokes typically exhibit higher highs and lower lows or higher lows and lower highs patterns (similar to the inner and outer bars). In this case, the brushstrokes will merge in a similar manner to the candlesticks described earlier until there is a clear breakout in the market structure. Contrary to brushstrokes, segments provide a relatively stable depiction of market trends on higher time frames. It is important to note that the algorithm used to calculate line segments from strokes can again be applied recursively to the generated line segments, forming higher-level line segments that represent market trends over a larger time frame. 🔵 Step 6: Pivot In ChanLun, the term "pivot" does not represent a price reversal point. Instead, it refers to a trading range where the security's price tends to fluctuate. Within a given "Segment," a pivot is determined by the overlap of two consecutive strokes moving in opposite directions along the segment. When two downward trend strokes, A and B, form a pivot P within an upward trend segment S, the upper and lower boundaries of the pivot are defined as follows: 1. Upper limit (P) = min(high(A), high(B)) 2. Lower limit (P) = max(low(A), low(B)) The pivot range is usually where consolidation and high trading volume occur. If future strokes moving in the opposite direction along the current segment overlap with the upper and lower boundaries of the pivot, those strokes will merge into the existing pivot, extending it along the x-axis. A new pivot is formed when two consecutive strokes moving in the opposite direction along the current segment intersect each other without overlapping the previous pivot. Similarly, pivots can be recursively identified in higher-level segments. The blue boxes below indicate "Segment Pivots" identified in the context of higher-level segments. 🔵 Step 7: Buy/Sell Points ChanLun defines three types of buy/sell points. 1. Type 1 Buy and Sell Points: Also called trend reversal points. These points mark where an old segment ends and a new segment begins. 2. Type 2 Buy and Sell Points: Also called trend continuation points. These points occur when the price is in a trend, indicating trend continuation. In an uptrend, Type 2 buy points are rebound points after the price retraces to previous lows or support levels, signaling a likely continuation of the upward movement. In a downtrend, Type 2 sell points are pullback points after the price bounces to previous highs or resistance levels, signaling a likely continuation of the downward movement. 3. Type 3 Buy and Sell Points: These points represent retests of a pivot range breakout. The presence of these retest points indicates that the price may continue to move up/down above/below the pivot level. Astute readers may notice that these buy/sell points are lagging indicators. For example, multiple candlesticks will have occurred by the time a new segment is confirmed at a Type 1 buy/sell point in that segment. In fact, buy/sell points do lag behind actual market movements. However, ChanLun addresses this issue through multi-timeframe analysis. By examining buy/sell points confirmed in lower timeframes, additional confidence can be gained in determining the overall trend of higher timeframes. 🔵 Step 8: Divergence Another core technique in ChanLun is using divergence to predict the occurrence of Type 1 buy/sell points. While MACD is the most commonly used indicator for detecting divergence, other indicators like RSI can also serve this purpose. 🟠 Summary Essentially, ChanLun is a powerful technical analysis method that combines careful examination and interpretation of price charts, the application of technical indicators and quantitative tools, and keen attention to multiple timeframes. Its goal is to identify current market trends and uncover potential trading opportunities. What sets ChanLun apart is its holistic approach, which integrates both qualitative and quantitative analysis to facilitate informed and successful trading decisions. “缠论”是一种起源于中国的备受推崇的技术分析方法。自 2006 年推出以来，ChanLun 凭借其驾驭复杂市场动态的非凡能力，迅速在中国交易社区中获得了极大的关注和强大的追随者。 ChanLun 非常重视市场结构、价格行为、动量以及市场力量之间错综复杂的相互作用。它认识到市场以周期性模式运作，旨在捕捉价格变动的底层结构和节奏。通过对价格和时间之间错综复杂的关系的细致分析，它为交易者提供了关于市场趋势、潜在逆转和关键转折点的独特视角。 该指标提供了 ChanLun 理论的细致而全面的实施。它有助于对所有基本组成部分进行深入分析和可视化表示，包括 “Candlestick Conversion”， “Candlestick Standardization”， “Fractal”， “Stroke”， “Segment”， “Pivot” 和 “Buying/Selling Point”。 🟠 算法 🔵 1 步：烛台转换 在 ChanLun 中，烛台分析较少关注开盘价/收盘价和灯芯，而是强调股价达到的价格范围。因此，ChanLun 的第一步涉及将每根烛条转换为仅包含最高价和最低价，而忽略其他元素。 🔵 第 2 步：烛台标准化 在第二步中，对转换后的烛台进行标准化，以确保严格的方向一致性，并消除内柱线或外柱线的存在。对于任何相邻的两根烛条 A 和 B，其中一根的价格范围完全包含另一根，A 和 B 被合并为新的烛条 C。如果 A 从前一根蜡烛开始呈上升趋势，则 C 将被定义为最高价 （C） = 最大值（最高价 （A）， 最高价 （B）） 和最低价 （C） = 最大值（最低价 （A）， 最低价 （B））。如果 A 从前一根蜡烛开始呈下降趋势，则 C 将被定义为最高价 （C） = min（最高价 （A）， 最高价 （B）） 和最低价 （C） = min（最低价 （A）， 最低价 （B））。 完成这些步骤后，在考虑任何相邻的烛条 A 和 B 时，我们始终可以观察到以下任一条件： 1. 最高价 （A） > 最高价 （B） 和最低价 （A） >最低价 （B） 2。最高价 （A） <最高价 （B） 和最低价 （A） <最低价 （B） 下图说明了此步骤后烛台的显示方式。 🔵 第 3 步：分形 “分形”是指由三个连续的“标准化”烛台形成的形态，其中中间的烛台与周围的烛台相比显示出明显的更高或更低的值。当考虑三个相邻的烛台 A、B 和 C 时，我们有以下两个条件之一： 1. 最高价 （B） > 最高价 （A） 和高点 （B） >最高价 （C） 和最低价 （B） >最低价 （A） 和最低价 （B） >最低价 （C） 2。高 （B） < 低 （A） 和高 （B） < 低 （C） 和低 （B） < 低 （A） 和低 （B） < 低 （C）对于 上面的 #1，我们将 A、B 和 C 的组合称为“顶部分形”，而对于 #2，我们将其指定为“底部分形”。 下图说明了所有分形，其中红色三角形表示顶部分形，绿色三角形表示底部分形。 🔵 第 4 步：笔画 “笔画” 是连接顶部分形和底部分形的一条线，遵循以下规则： 1. 在这些分形之间必须至少有一个 “自由” 烛台，这意味着它不是顶部或底部分形的一部分。这保证了笔画从头到尾至少包含五根烛条。 2. 与底部分形相比，顶部分形必须具有更高的价格。 3. 端点分形应表示整个笔画范围内的最高点或最低点。（此指示器中有一个选项用于启用或禁用此规则。 笔触使交易者能够识别和可视化重大的价格波动或趋势，同时有效地过滤掉微小的波动。 🔵 第 5 步：细分 “细分”是一条更高级别的线，连接至少连续三个笔画的起点和终点，反映了当前市场结构的趋势。随着新笔触的出现，它继续延伸，直到市场结构出现中断。当上升趋势形成较低的高点和较低的低点，或者当下降趋势形成更高的高点和更高的低点时，就会发生突破。值得注意的是，在交易区间内，笔触通常表现出更高的高点和更低的低点或更高的低点和更低的高点形态（类似于内柱和外柱）。在这种情况下，笔触将以与前面描述的烛台类似的方式合并，直到市场结构出现明显的突破。与笔触相反，分段在更高的时间范围内提供了对市场趋势的相对稳定的描述。 需要注意的是，用于从笔画计算线段的算法可以再次递归地应用于生成的线段，形成更高级别的线段，代表更大时间范围内的市场趋势。 🔵 第 6 步：枢轴 在 ChanLun 中，“枢轴”一词并不表示价格反转点。相反，它代表证券价格趋于波动的交易区间。在给定的 “Segment” 中，枢轴由沿线段相反方向移动的两个连续笔画的重叠决定。当两个下降趋势笔触 A 和 B 在上升趋势段 S 内形成枢轴 P 时，枢轴的上限和下限定义如下： 1. 上限 （P） = min（最高 （A）， 最高 （ pein: B） 2. 下限 （P） = 最大值（最低 （A）， 最低 （B）） 枢轴范围通常是发生盘整和交易量高的地方。 如果沿当前线段的相反方向移动的未来笔触与枢轴的上限和下限重叠，则该笔划将合并到现有枢轴中，并沿 x 轴延伸枢轴。当沿当前线段的相反方向移动的两个连续笔触彼此相交而不与前一个轴重叠时，将形成新的枢轴。 同样，也可以在更高级别的 segment 中递归识别 pivots。下面的蓝色框表示在更高级别区段的上下文中标识的“Segment Pivots”。 🔵 第 7 步：购买/出售积分 ChanLun 中定义了三种类型的购买/出售积分。 1. 类型 1 买入和卖出点：也称为趋势反转点。这些点是旧路段终止和生成新路段的位置。 2. 类型 2 买入和卖出点：也称为趋势延续点。这些点发生在价格处于趋势中时，标志着趋势的延续。在上升趋势中，类型 2 买点是价格回撤至先前低点或支撑位后的反弹点，表明价格可能会继续上涨。在下跌趋势中，类型 2 卖点是价格反弹至前高点或阻力位后的回调点，表明价格可能会继续下跌。 3. 类型 3 买入和卖出点：这些点表示对枢轴范围突破的重新测试。这些重新测试点的存在表明，价格有可能在枢轴水平上方/下方继续向上/向下移动。 挑剔的读者可能会注意到这些买入/卖出点是滞后指标。例如，当确认新区段时，自该区段的类型 1 买入/卖出点以来已经发生了多根烛台。 事实上，买入/卖出点确实落后于实际市场走势。然而，ChanLun 通过使用多时间框架分析解决了这个问题。通过检查较低时间框架中确认的买入/卖出点，可以在确定较高时间框架的整体趋势方面获得额外的信心。 🔵 第 8 步：背离 ChanLun 的另一个核心技术是应用背离来预测 1 型买入/卖出点的出现。虽然 MACD 是检测背离最常用的指标，但 RSI 等其他指标也可用于此目的。 🟠 总结 从本质上讲，ChanLun 是一种强大的技术分析方法，它结合了对价格图表的仔细检查和解释、技术指标和定量工具的应用以及对多个时间框架的敏锐关注。其目标是确定当前的市场趋势并发现潜在的交易前景。ChanLun 的与众不同之处在于其整体方法，该方法融合了定性和定量分析，以促进明智和成功的交易决策。
Pine Script® göstergesi
chanzhongchan663 tarafından
Kira EMA 9-21 + VWAP Buy/Sell🔥 KIRA MOMENTUM SETUP – BUY & SELL SYSTEM Simple • Powerful • Trend-Based ✅ BUY CONDITION 🟢 EMA 9 crosses ABOVE EMA 21 AND Price closes ABOVE VWAP 🔴 SELL CONDITION EMA 9 crosses BELOW EMA 21 AND Price closes BELOW VWAP 🚫 NO TRADE ZONE ❌ EMAs tangled ❌ Price chopping around VWAP 🎯 BEST TIMEFRAMES ✅ 5-Minute ✅ 15-Minute (Indices & highly liquid stocks) ⚠️ RISK RULE • Buy SL ➝ Below recent swing low • Sell SL ➝ Above recent swing high • Risk per trade ≤ 1%
Pine Script® göstergesi
kirainvestors tarafından
Adaptive Support & Resistance ProAdaptive Support & Resistance Pro – Description Adaptive Support & Resistance Pro is an advanced S/R tool designed to automatically identify key support and resistance zones based on a combination of RSI, CMO dynamics, and pivot logic. This indicator provides precise and reactive levels that form only when specific technical conditions are met, filtering out noise and delivering more reliable S/R signals. It is ideal for technical traders who want to understand where price naturally pauses, reverses, or consolidates—without the need to manually draw lines on every chart. 🔍 Key Features 1. Automatic Support & Resistance Detection The indicator uses: RSI (9) CMO logic based on HMA Pivot structure (len = 2) to generate valid Support and Resistance zones. A level is drawn only when all required conditions align, preventing false or weak signals. 2. Multi-Timeframe Analysis (MTF) You can view the chart on one timeframe (e.g., 5m) and display Support/Resistance levels from another timeframe (e.g., 1H, 4H, D) at the same time. This allows for: viewing higher-timeframe structures on lower charts, better planning of entries and exits, avoiding trades inside strong zones that may not be visible on the current timeframe. All of this is controlled through the input: S/R Timeframe 3. Adjustable Line Thickness (visual enhancement) Using the input: Line Width you can increase the thickness of support/resistance lines to: make important zones more visible, improve chart readability, emphasize S/R levels according to your visual preference. This is especially useful on fast markets (Forex, Crypto) and on higher timeframes where clarity of levels is essential. 4. Clear distinction between Support and Resistance Support lines have their own customizable color (default: green) Resistance lines have their own customizable color (default: red) You can freely adjust the colors to match your personal TradingView layout or theme. 5. Alerts (Notification System) The built-in alert: "New S/R line" triggers whenever a new support or resistance level is detected. This helps you: monitor important levels without constantly watching the chart, react quickly to new structure signals, stay aware of market changes in real time. 🎯 How to Use the Indicator Support levels often indicate potential reversals or long-entry opportunities. Resistance levels highlight areas where price may reverse downward or form short setups. The best performance is achieved when combining this indicator with: price action, EMA structure, confirmation zones, breakout logic, trend filters. MTF usage is highly recommended: Analyze higher-timeframe S/R while trading lower-timeframe setups. ⚠️ Disclaimer This indicator does not generate direct buy or sell signals. Its purpose is to assist in market analysis and highlight areas where price is likely to react. 📌 Conclusion Adaptive Support & Resistance Pro combines the strongest elements of automated S/R mapping: precision, reduced noise, multi-timeframe flexibility, and advanced logic based on RSI, CMO, and pivot structure. It is perfect for traders who want: clean and accurate S/R levels, higher-timeframe insight while trading lower charts, customizable and visually enhanced structure mapping.
Pine Script® göstergesi
Aleksin_Aleksandar tarafından
4
Thuận-Pro Full OptionThe Ultimate Price Action & Momentum System 1. OVERVIEW Thuận-Pro Final is an all-in-one trading system designed for precision and safety. It combines Market Structure, Supply/Demand Zones, and Momentum Confluence to identify high-probability trade setups. 2. VISUAL FEATURES Green Boxes (Support Zones): Strong buying areas. Red Boxes (Resistance Zones): Strong selling areas. "BUY" / "SELL" Labels: Instant signals generated when price tests a zone and confirms a rejection. Purple Lines (Fibonacci Targets): Auto-generated profit targets (1.272, 1.618, 2.618) when price breaks the All-Time High (Blue Sky mode). Bottom Pane: RSI + MACD: Color-coded trend strength. Volume + Yellow Line: Real-time volume analysis 3. HOW TO TRADE (STRATEGY) 🟢 BUY SIGNAL (Long Setup) Zone: Price drops into a Green Box (Support). Reaction: Price touches the zone but CLOSES inside or above the box bottom (Valid Rejection/Spring). Confirmation: A green "BUY" label appears below the candle. Momentum (Optional): RSI is Oversold (≤ 35) and Volume bar is above the Yellow Line. 🔴 SELL SIGNAL (Short Setup) Zone: Price rallies into a Red Box (Resistance). Reaction: Price touches the zone but CLOSES inside or below the box top (Valid Rejection/Upthrust). Confirmation: A red "SELL" label appears above the candle. Momentum (Optional): RSI is Overbought (≥ 65) and Volume bar is above the Yellow Line. 4. SMART ALERTS Set up alerts in TradingView to never miss a move: Touch Support: Triggered when price tests a Green Zone. Touch Resistance: Triggered when price tests a Red Zone. Break High: Trend Reversal (Bearish ➔ Bullish). Break Low: Trend Reversal (Bullish ➔ Bearish). 5. PRO TIPS Safe Entry: The indicator filters out "Knife Catching." If a candle closes outside the box (breaking the zone), the signal will NOT appear. Profit Taking: Use the Purple Fibonacci Lines (1.618) as your primary target when the market breaks new highs. Stop Loss: Place SL slightly below the Green Box (for Buy) or above the Red Box (for Sell). Developed by: Nguyen Duc Thuan
Pine Script® göstergesi
yen_fx_vn tarafından
RT-Liquidation Engine-DeltaIntroduction The RT-Liquidation Engine-Levels is a liquidity mapping tool designed to highlight where leveraged long and short positions may be vulnerable to liquidation. It plots projected Liquidation Levels above and below price, grouped by leverage tiers, so traders can see where the algorithm estimates clustered liquidation zones might sit relative to current price. The RT-Liquidation Engine-Levels indicator is intended to be used in conjunction with the RT-Liquidation Engine-Delta indicator. This writeup will cover both indicators in depth and explain how they work together. Liquidity Theory – What This Tool Is Looking At Liquidity levels are a data point that advanced traders study to understand the price levels where positions may be forced out of the market. While exchanges can show open orders in an order book, they do not publish where traders will be liquidated. However, market participants who can estimate those zones often pay close attention to them, because a single wick can be enough to trigger liquidations and force positions to close into the market. The RT-Liquidation Engine is built around this concept. It uses on-chart information and volume to approximate where these potential liquidation areas may be and displays them directly on the price chart so traders can see the projected levels they may want to monitor. How It Works Because real Liquidation Levels are not published by exchanges, the indicator cannot read them directly. Instead, it uses an internal algorithm that studies current prices, direction, and volume to estimate where common leveraged positions might be at risk. Conceptually, the algorithm: Uses the visible data on the chart to approximate where typical leveraged long and short positions may be clustered. Projects those estimates as horizontal levels above and below current price. Keeps those projected levels on the chart until price action trades into them and the level is considered “touched.” The result is a set of dynamic levels that act as an estimated map of where liquidation events might be more likely, based on the chart’s own history and current structure. Trader Math And Leverage Levels Traders using perpetual futures often use different leverage levels for their positions. The higher the leverage, the more vulnerable those positions are to being liquidated by relatively small moves in price. While the exact leverage of individual traders is unknown, the Liquidation Engine focuses on four commonly referenced leverage tiers: 5x Leverage 10x Leverage 25x Leverage 50x Leverage Each tier can be displayed as its own set of projected Liquidation Levels on the chart so traders can see a structured view of where different leverage groups may be sensitive. The Liquidation Levels can be displayed with Multi Color options or in Red/Green depending on the trader's preference. The above chart shows the Liquidation Levels being displayed with Multi Colors. The above chart shows the Liquidation Levels being displayed in Red/Green. Reading The Levels Above and below the candles you will see projected Liquidation Levels. These levels appear at the prices where the algorithm estimates that leveraged positions for each tier could be vulnerable, and they remain drawn until price has traded through them. In the default view: Thickness of the level – Indicates the estimated size of the position. Thicker lines represent larger projected positions. Color of the level – Indicates which leverage group the level belongs to (5x, 10x, 25x, or 50x). Length of the level – Indicates how long the estimated leveraged position has been open according to the algorithm. This combination provides a visual profile of which zones have more concentrated projected liquidation interest and which have been standing in the market for longer. Tuning Options The Liquidation Engine includes a focused set of tuning options so traders can adjust how much information is plotted and how it appears on their charts. Custom Tuning Options Include: Sensitivity Filter – Adjusts the overall threshold the algorithm uses when estimating positions. Increasing this value reduces the number of plotted levels and focuses on larger estimated positions. Decreasing it allows smaller estimated positions to be considered, increasing the number of displayed levels. Leverage Level Toggles – Individual toggles for each leverage group (5x, 10x, 25x, 50x). These allow traders to show or hide specific tiers depending on which groups they want to monitor. Color Settings – Controls the colors and transparency of the levels. Traders can adjust these settings to match their chart theme and highlight or soften specific leverage groups. Summary Table Options – Controls the on-chart table that tracks the estimated number of Long versus Short positions. Table On/Off – Toggles the table on or off. Table Position – Moves the table to different corners of the chart. Table Background Color / Table Text Color – Customizes the table’s appearance. Liquidation Engine – Delta In addition to plotting projected Liquidation Levels, the RT-Liquidation Engine-Levels Indicator is to be used in conjunction with the RT-Liquidation Engine-Delta Indicator. This tool displays the Liquidation Delta data that the algorithm estimates on the imbalance between long and short exposure. Conceptually, the RT-Liquidation Engine-Delta Indicator computes the following items: Aggregates the estimated long and short positions from the projected Liquidation Levels. Calculates a net difference (delta) between those two estimates. Displays that difference so traders can see when the projected open interest appears skewed to one side. When the estimated order book is heavily skewed in one direction, the market may sometimes move in the opposite direction as conditions rebalance. The delta view is designed to provide context for those potential rebalancing moves, not to predict exact turning points. Tuning options for the RT-Liquidation Engine-Delta Indicator are aligned with the RT-Liquidation Engine-Levels Indicator settings. If you change filters, toggles, or colors in the Levels tool, it is recommended to mirror those settings in the Delta tool so both views remain synchronized. Best Practices Some common usage patterns include: Timeframes – Many traders prefer to use Liquidation Engine on intraday timeframes under 60 minutes. Timeframes such as 30-minute candles or smaller are often used when monitoring leveraged flows. Load Times – The algorithm performs a significant amount of calculations to project these Liquidation Levels and Deltas. On some symbols and timeframes, this can take noticeable time to load the chart. When changing settings, keep an eye on the loading indicator in the chart header to confirm calculations are still running. In normal conditions, these calculations are completed in less than 30 seconds. Market Sessions And Levels Out Of Range – If projected levels appear far from current price or do not align with visible action, check the chart’s session settings in the bottom-left of the chart (for example, ETH vs RTH sessions). Ensuring the correct session is active can help keep the displayed levels in a more relevant range. These guidelines are intended to make the tool easier to work with and to keep expectations realistic when interpreting the projections. What Makes This Tool Different While many indicators focus on price alone, the Liquidation Engine Levels and Delta tools are designed specifically around estimated liquidation behavior: It concentrates on where leveraged positions may be at risk, rather than only where price has been in the past. It segments projected levels by leverage tier so traders can distinguish between different risk profiles on the chart. It includes both a level-mapping view and a delta view, providing context for both where levels sit and how imbalanced the estimated positioning might be. Important Note The RT-Liquidation Engine-Levels and RT-Liquidation Engine-Delta tools provide an approximation of where leveraged positions might be vulnerable based solely on chart data. They do not access actual exchange liquidation feeds, does not reveal real trader positions, and cannot guarantee that a projected level will cause price to react. This indicator is intended to provide additional context around potential liquidation zones and positioning imbalances. It is not a standalone signal generator and should always be used together with your own analysis, testing, and risk management. Historical interactions with projected Liquidation Levels, including any illustrative examples, do not guarantee future results. 🐋 Tight lines and happy trading!
Pine Script® göstergesi
RainbowRunner144 tarafından
RT-Liquidation Engine-LevelsIntroduction The RT-Liquidation Engine-Levels is a liquidity mapping tool designed to highlight where leveraged long and short positions may be vulnerable to liquidation. It plots projected Liquidation Levels above and below price, grouped by leverage tiers, so traders can see where the algorithm estimates clustered liquidation zones might sit relative to current price. The RT-Liquidation Engine-Levels indicator is intended to be used in conjunction with the RT-Liquidation Engine-Delta indicator. This writeup will cover both indicators in depth and explain how they work together. Liquidity Theory – What This Tool Is Looking At Liquidity levels are a data point that advanced traders study to understand the price levels where positions may be forced out of the market. While exchanges can show open orders in an order book, they do not publish where traders will be liquidated. However, market participants who can estimate those zones often pay close attention to them, because a single wick can be enough to trigger liquidations and force positions to close into the market. The RT-Liquidation Engine is built around this concept. It uses on-chart information and volume to approximate where these potential liquidation areas may be and displays them directly on the price chart so traders can see the projected levels they may want to monitor. How It Works Because real Liquidation Levels are not published by exchanges, the indicator cannot read them directly. Instead, it uses an internal algorithm that studies current prices, direction, and volume to estimate where common leveraged positions might be at risk. Conceptually, the algorithm: Uses the visible data on the chart to approximate where typical leveraged long and short positions may be clustered. Projects those estimates as horizontal levels above and below current price. Keeps those projected levels on the chart until price action trades into them and the level is considered “touched.” The result is a set of dynamic levels that act as an estimated map of where liquidation events might be more likely, based on the chart’s own history and current structure. Trader Math And Leverage Levels Traders using perpetual futures often use different leverage levels for their positions. The higher the leverage, the more vulnerable those positions are to being liquidated by relatively small moves in price. While the exact leverage of individual traders is unknown, the Liquidation Engine focuses on four commonly referenced leverage tiers: 5x Leverage 10x Leverage 25x Leverage 50x Leverage Each tier can be displayed as its own set of projected Liquidation Levels on the chart so traders can see a structured view of where different leverage groups may be sensitive. The Liquidation Levels can be displayed with Multi Color options or in Red/Green depending on the trader's preference. The above chart shows the Liquidation Levels being displayed with Multi Colors. The above chart shows the Liquidation Levels being displayed in Red/Green. Reading The Levels Above and below the candles you will see projected Liquidation Levels. These levels appear at the prices where the algorithm estimates that leveraged positions for each tier could be vulnerable, and they remain drawn until price has traded through them. In the default view: Thickness of the level – Indicates the estimated size of the position. Thicker lines represent larger projected positions. Color of the level – Indicates which leverage group the level belongs to (5x, 10x, 25x, or 50x). Length of the level – Indicates how long the estimated leveraged position has been open according to the algorithm. This combination provides a visual profile of which zones have more concentrated projected liquidation interest and which have been standing in the market for longer. Tuning Options The Liquidation Engine includes a focused set of tuning options so traders can adjust how much information is plotted and how it appears on their charts. Custom Tuning Options Include: Sensitivity Filter – Adjusts the overall threshold the algorithm uses when estimating positions. Increasing this value reduces the number of plotted levels and focuses on larger estimated positions. Decreasing it allows smaller estimated positions to be considered, increasing the number of displayed levels. Leverage Level Toggles – Individual toggles for each leverage group (5x, 10x, 25x, 50x). These allow traders to show or hide specific tiers depending on which groups they want to monitor. Color Settings – Controls the colors and transparency of the levels. Traders can adjust these settings to match their chart theme and highlight or soften specific leverage groups. Summary Table Options – Controls the on-chart table that tracks the estimated number of Long versus Short positions. Table On/Off – Toggles the table on or off. Table Position – Moves the table to different corners of the chart. Table Background Color / Table Text Color – Customizes the table’s appearance. Liquidation Engine – Delta In addition to plotting projected Liquidation Levels, the RT-Liquidation Engine-Levels Indicator is to be used in conjunction with the RT-Liquidation Engine-Delta Indicator. This tool displays the Liquidation Delta data that the algorithm estimates on the imbalance between long and short exposure. Conceptually, the RT-Liquidation Engine-Delta Indicator computes the following items: Aggregates the estimated long and short positions from the projected Liquidation Levels. Calculates a net difference (delta) between those two estimates. Displays that difference so traders can see when the projected open interest appears skewed to one side. When the estimated order book is heavily skewed in one direction, the market may sometimes move in the opposite direction as conditions rebalance. The delta view is designed to provide context for those potential rebalancing moves, not to predict exact turning points. Tuning options for the RT-Liquidation Engine-Delta Indicator are aligned with the RT-Liquidation Engine-Levels Indicator settings. If you change filters, toggles, or colors in the Levels tool, it is recommended to mirror those settings in the Delta tool so both views remain synchronized. Best Practices Some common usage patterns include: Timeframes – Many traders prefer to use Liquidation Engine on intraday timeframes under 60 minutes. Timeframes such as 30-minute candles or smaller are often used when monitoring leveraged flows. Load Times – The algorithm performs a significant amount of calculations to project these Liquidation Levels and Deltas. On some symbols and timeframes, this can take noticeable time to load the chart. When changing settings, keep an eye on the loading indicator in the chart header to confirm calculations are still running. In normal conditions, these calculations are completed in less than 30 seconds. Market Sessions And Levels Out Of Range – If projected levels appear far from current price or do not align with visible action, check the chart’s session settings in the bottom-left of the chart (for example, ETH vs RTH sessions). Ensuring the correct session is active can help keep the displayed levels in a more relevant range. These guidelines are intended to make the tool easier to work with and to keep expectations realistic when interpreting the projections. What Makes This Tool Different While many indicators focus on price alone, the Liquidation Engine Levels and Delta tools are designed specifically around estimated liquidation behavior: It concentrates on where leveraged positions may be at risk, rather than only where price has been in the past. It segments projected levels by leverage tier so traders can distinguish between different risk profiles on the chart. It includes both a level-mapping view and a delta view, providing context for both where levels sit and how imbalanced the estimated positioning might be. Important Note The RT-Liquidation Engine-Levels and RT-Liquidation Engine-Delta tools provide an approximation of where leveraged positions might be vulnerable based solely on chart data. They do not access actual exchange liquidation feeds, does not reveal real trader positions, and cannot guarantee that a projected level will cause price to react. This indicator is intended to provide additional context around potential liquidation zones and positioning imbalances. It is not a standalone signal generator and should always be used together with your own analysis, testing, and risk management. Historical interactions with projected Liquidation Levels, including any illustrative examples, do not guarantee future results. 🐋 Tight lines and happy trading!
Pine Script® göstergesi
RainbowRunner144 tarafından
2-Close + Bar 5 Reversal (Scan Ready)Bulkowski's Bullish 2-Step Reversal Bar 1 Any price bar. Bar 2 Price makes a low below bar 1 with a lower close, too. Bar 3 Price has a low below bar 2 but a close above bar 1 (which will also be above bar 2's close). Bars 1 to 3 form a 2-close reversal pattern. Bar 4 Makes a close below bar 3's close. Bar 5 Has a low below bar 4 but closes above bars 3 and 4. Breakout Breaks out upward 79% of the time in stocks. From his page: thepatternsite.com
Pine Script® göstergesi
toppermost tarafından
Human3Human 3.0 Left-Side Bottom Reversal Indicator 人间财风 3.0 左侧止跌指标 **Green Arrow** → Bottom Reversal Signal (main signal, focus on this one) 「绿止跌，多看绿箭头」 **Red Arrow** → Top Exhaustion Signal (secondary, can be ignored or disabled in settings) 「红滞涨，少用红箭头」 **Best used on:** 「宜用图表」 - BTC 8H - VIX 8H - Nasdaq Index Daily (1D) **Not recommended for:** 「不宜图表」 - Gold - A-shares (Chinese stocks) **For trial :** 「使用联系」 Find me on X (Twitter): @kimvp9
Pine Script® göstergesi
kimvp tarafından
熊熊测试123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf
Pine Script® göstergesi
LittleDirectorBear tarafından
1
Morning ORB FVG Trigger✅ Overview Morning ORB FVG Trigger is a complete intraday trading framework built around: A Morning Opening Range Breakout (ORB) The first Fair Value Gap (FVG) after that breakout Strict risk management and position sizing Optional HTF trend filter (Daily / Weekly / Monthly) Optional Daily ATR filter to avoid extreme days The script is designed for futures / indices / FX on intraday charts up to 15 minutes and for traders who want a clean, mechanical entry framework with clear risk. 🧠 Core idea Define a morning opening range (e.g. 09:30–09:45). Wait for a clean breakout above/below that range. After the breakout, wait for the first FVG in breakout direction, confirmed by the next candle (no immediate full reclaim). Use a chosen stop logic + R:R factor to build risk/reward boxes. Calculate position size based on your account risk. (Optional) Only take trades: In the direction of the HTF EMA trend (D/W/M). On days where the morning range is within a band of the Daily ATR. You can also disable all signals/boxes and use the script just as a visual ORB tool. ⏰ 1. ORB / Morning Range Inputs (Main section) Morning Range Session Time window of the opening range in exchange time Example: 09:30–09:45 for a 15-minute ORB. You can type custom ranges (e.g. 09:30–09:35 for a 5-minute ORB). Risk/Reward (TP factor) Multiplier for the take-profit distance relative to the stop. 2.0 = TP is 2× the stop distance 1.5 = TP is 1.5× the stop distance Show ORB range If enabled, draws: ORB high/low lines ORB labels (e.g. 15min ORB high / low) Optional midline Extend ORB lines to the right (bars) How many bars to extend the ORB high/low horizontally beyond the ORB itself. Trade box width (bars) Horizontal width (in bars) of: Red risk box (entry–stop) Green reward box (entry–TP) Implementation details The ORB is always calculated on 1-minute data internally, so it stays precise even on 5m/15m charts. The script only works on intraday timeframes up to 15 minutes. 📦 2. FVG Block Group: “FVG” Threshold % Minimum size of an FVG in % of price. 0 = every FVG Higher values = only larger gaps Auto threshold (from volatility) If enabled, the minimum FVG size is derived from historical volatility instead of a fixed percentage. Allow breakout FVG partly inside ORB Off (default): the FVG must lie fully outside the ORB. On: the breakout FVG itself may still overlap the ORB a bit, as long as it is the first one attached to the breakout move. Enable FVG entry signals, boxes & alerts On: full system – FVG detection, entry labels, risk/TP boxes, alerts. Off: no entries, no risk/TP boxes, no alerts. You only get the ORB and (optionally) the HTF dashboard, so you can trade your own setups. Entry mode Entry mode (Mid / Edge / NextOpen) Mid – Entry at the midpoint of the FVG. Edge – Long at the upper FVG edge, short at the lower FVG edge. NextOpen – No limit order in the gap. Entry is placed at the next bar open after FVG confirmation. Edge offset (ticks) Additional offset for Edge entries: Long: +ticks = a bit above the FVG (more conservative) -ticks = deeper into the FVG (more aggressive) Short: +ticks = a bit below the FVG -ticks = deeper into the FVG FVG detection logic Uses a LuxAlgo-style 3-candle FVG pattern (gap between candle 1 and 3). Only one FVG is taken: the first valid FVG after the ORB breakout in breakup direction. The FVG candle is the middle bar; the script: Detects the FVG on the previous bar. Waits for the current bar to confirm it: Bullish: current low must stay above the lower FVG boundary Bearish: current high must stay below the upper FVG boundary Only then an entry signal is generated. 🛑 3. Stop Logic Group: “Stop Logic” Stop mode (PrevBar / Pivot / FVG Candle) PrevBar – Stop at the low/high of the candle before the FVG (tight/aggressive). FVG Candle – Stop at the low/high of the FVG candle itself (medium). Pivot – Stop at the most recent swing high/low using pivotLeft / pivotRight pivots (more conservative). Ticks (stop buffer) Offset (in ticks) from the selected stop level. > 0 = further away (more room, more risk) < 0 = closer (tighter stop) Pivot left / Pivot right Number of candles left/right to define a swing high/low when using Pivot stop mode. Typical intraday values: 2–3. The script also sanity-checks the stop: if the calculated stop would be invalid (e.g. above entry in a long), it moves it by a minimal distance (2 ticks) to keep a valid risk. 📈 4. HTF Trend Filter (Daily / Weekly / Monthly) Group: “HTF Trend Filter” Enable HTF trend filter If enabled, trades are only allowed: Long when at least 2 of D/W/M closes are above their EMA Short when at least 2 of D/W/M closes are below their EMA EMA length (D/W/M) EMA length for all three higher timeframes (Daily, Weekly, Monthly). This helps focus entries in the direction of the dominant higher-timeframe trend. 📊 5. ATR Filter (Daily) Group: “ATR Filter (Daily)” Use daily ATR filter If enabled, the height of the ORB (ORB high – ORB low) must be within a band of the Daily ATR to allow any signals. Daily ATR length ATR period on the Daily timeframe. Min ORB size vs ATR Lower bound: Example: 0.3 → ORB must be at least 0.3 × Daily ATR 0.0 = no minimum. Max ORB size vs ATR Upper bound: Example: 1.5 → ORB must be ≤ 1.5 × Daily ATR 0.0 = no maximum. If the ORB is too small (choppy) or too large (exhausted move), no breakout or FVG signal will be generated on that day. 🧭 6. HTF Dashboard & Signal Labels Group: “HTF Trend Dashboard” Show HTF dashboard Draws a small label at the top of the chart showing: HTF Trend (EMA X) D: UP/FLAT/DOWN W: UP/FLAT/DOWN M: UP/FLAT/DOWN Dashboard position Top Right, Top Center, Top Left – places the dashboard at the top. Over Risk Info – no top dashboard; instead, the HTF trend info is shown as a label near the risk box when a new signal appears. Lookback (bars) for top anchor How many bars to use to determine the top price level for dashboard placement. Show HTF trend above risk box on signal Only relevant if Dashboard position = Over Risk Info. When enabled, a small HTF label appears near the risk box for each new trade. Signal label vertical offset (ticks) Vertical spacing between risk info label and HTF label. Minimum spacing HTF/Risk (ticks) Ensures a minimum vertical distance so the two labels don’t overlap. HTF signal label X offset (bars) Horizontal offset (left/right) relative to the risk info label. ⏳ 7. ORB–FVG Filters (Session & Time Window) Group: “ORB FVG Filter” Only same session day If enabled, FVG entries are only allowed on the same calendar day as the ORB. When the date changes, all state & drawings are reset. Limit hours after ORB Enables a time window after the ORB end. Trading window after ORB (hours) Length of that window in hours. Example: 2.0 → FVG signals only in the first 2 hours after ORB end. 💰 8. Risk Management & Position Sizing Group: “Risk Management” Calculate position size If enabled, the script computes suggested mini and micro contract size for you. Account size Your trading account size (in account currency). Risk mode Percent – risk is a % of account size (Account risk %). Fixed amount – risk is a fixed dollar amount (Fixed risk ($)). Account risk % Risk per trade as a percentage of account size (e.g. 1.0 for 1%). Fixed risk ($) Fixed risk per trade in dollars when using Fixed amount mode. Micro factor (vs mini) How much a micro contract is worth relative to a mini. Example: 0.1 → one micro moves 1/10 of one mini. Risk Info label For each new trade, a label is shown above the boxes with: Stop distance in price and $ risk per mini Max risk allowed for the trade Suggested mini and micro size Text like: Suggested: 2 mini Suggested: 5 micro or Suggested: no trade This makes the script especially useful for prop-firm rules or strict risk discipline. 🎨 9. Visual Style (Boxes, Labels, ORB Lines) Group: “Box & Label Style (Trade)” Label font size (Very small, Small, Normal, Large) Entry label BG / text color Stop label BG / text color TP label BG / text color Risk info BG / text color Risk box color (entry–stop zone) Reward box color (entry–TP zone) Group: “ORB Style” ORB high line color ORB low line color ORB line width ORB label font size ORB label background color ORB label text color Show ORB midline ORB midline color / width / style (Solid / Dashed / Dotted) ⚠️ 10. Alerts Group: “Alerts” The script defines three alert conditions: Long entry FVG breakout Triggered when a new long signal appears. Short entry FVG breakout Triggered when a new short signal appears. FVG entry (long/short) Generic alert for any new signal (long or short). To use them: Add the indicator to the chart. Open the Alerts dialog → “Condition”. Select this script and one of the alert conditions. Set your preferred expiration and notification settings. Alerts only fire when Enable FVG entry signals, boxes & alerts is on. 🧩 11. How the trading logic flows (summary) Build ORB on 1-minute data during the selected session. Optionally reject the day if ORB is outside the ATR bounds. Wait for a breakout (close above high or below low), respecting HTF trend filter. After breakout, look for the first valid FVG in that direction: Outside the ORB (unless breakout FVG allowed inside) Confirmed by the next candle (no full reclaim) Once confirmed: Compute entry, stop, target. Draw risk/reward boxes and all labels. Optionally show HTF signal label over the risk info. Trigger alerts if enabled. If you disable FVG signals, only steps 1–3 (plus dashboard) are effectively active. ⚠️ 12. Notes & Disclaimer Script is intended for intraday trading up to 15-minute timeframes. All signals are mechanical and do not guarantee profitability. Always backtest and forward-test on your own data before risking real money. This script is for educational purposes only and is not financial advice. 🚀 Quick-start guide Add the script to your chart Use an intraday timeframe ≤ 15 minutes (1m, 3m, 5m, 15m). Works best on liquid indices, futures, FX and large-cap stocks. Set the Morning Range In “Morning Range Session” choose the exchange’s opening window. Examples US index futures (CME): 08:30–08:45 or 08:30–08:35 US stocks (NYSE/Nasdaq): 09:30–09:45 or 09:30–09:35 The ORB is always calculated on 1-minute data internally, so the range stays accurate on higher intraday charts. Keep the default filters at first HTF Trend Filter: ON EMA length = 20 This will only allow trades in the direction of the dominant D/W/M trend. ATR Filter: OFF (optional; you can enable later once you’re comfortable). Use the full trade system In the FVG group leave “Enable FVG entry signals, boxes & alerts” = ON Entry mode: Mid Stop mode: FVG Candle or PrevBar Risk/Reward: 2.0 as a starting point. Set your risk Turn on “Calculate position size”. Enter your Account size and choose either: Risk mode = Percent (e.g. 1.0 = 1% per trade), or Risk mode = Fixed amount (e.g. $250 per trade). The risk info label will show: Stop distance in price and $/contract Max allowed risk Suggested mini and micro contract size. Enable alerts (optional) Open the Alerts dialog → Condition: this script. Choose one of: Long entry FVG breakout Short entry FVG breakout FVG entry (long/short) Choose “Once per bar” or “Once per bar close”, and your preferred notification type. Replay & journal Use the TradingView bar replay tool to step through past days. Focus on: How the ORB defines the structure. How the first confirmed FVG outside the ORB behaves. Whether the risk/TP levels fit your own style and product. 🎛 Recommended settings & profiles These are starting points, not rules. Always adapt to the instrument and your own risk tolerance. 1. Conservative / Trend-following Timeframe: 5m or 15m Morning Range Session: 15-minute ORB around the cash or futures open FVG Threshold %: 0.05–0.1 (filter out very small gaps) Auto threshold: OFF (keep it simple) Allow breakout FVG partly inside ORB: OFF Enable FVG entry signals/boxes/alerts: ON Entry mode: Mid Stop Logic Stop mode: Pivot Pivot left/right: 2–3 Stop buffer: +1–2 ticks HTF Trend Filter Enabled: ON EMA length: 20 ATR Filter Enabled: ON Daily ATR length: 14 Min ORB vs ATR: 0.3–0.4 Max ORB vs ATR: 1.2–1.5 Risk Management Risk mode: Percent Account risk: 0.5–1.0% Idea: Only trade when the higher-timeframe trend supports the move and the opening range is of a “normal” size for the current volatility. 2. Balanced / Intraday directional Timeframe: 3m or 5m FVG Threshold %: 0.02–0.05 Auto threshold: ON (lets the script adapt to volatility) Allow breakout FVG partly inside ORB: ON (first breakout FVG may partly sit inside the ORB) Entry mode: Edge Edge offset (ticks): 0 or +1 Stop Logic Stop mode: FVG Candle Stop buffer: 0–1 ticks HTF Trend Filter Enabled: ON ATR Filter Enabled: OFF (optional) Risk Management Risk mode: Percent Account risk: 1.0–1.5% (if this fits your plan) Idea: Slightly more aggressive entries at the gap edge, still aligned with HTF trend, but with more flexibility on ATR. 3. Aggressive / Scalping around the ORB Timeframe: 1m or 3m FVG Threshold %: 0.0–0.02 Auto threshold: ON Allow breakout FVG partly inside ORB: ON Entry mode: NextOpen or Edge with a negative offset (deeper into the gap) Stop Logic Stop mode: PrevBar Stop buffer: 0 or -1 tick HTF Trend Filter Enabled: OFF (or ON but treat as soft guidance) ATR Filter Enabled: OFF Risk Management Risk mode: Percent Account risk: lower, e.g. 0.25–0.5% per trade Idea: More trades and tighter stops. Best for experienced traders who understand the limitations of scalping and whipsaw risk. Final reminder All of these are templates, not guarantees: Always check how the system behaves on your market and session. Start on replay and demo before trading real money. Adjust filters (HTF, ATR, thresholds) until the signals fit your personal approach.
Pine Script® göstergesi
SebastianMaywald tarafından
1