Şimdi başlat

Göstergeler ve stratejiler

Wx Linear / Log Regression ChannelWx LinReg+ — Linear Regression Channel (with optional log scale) LinReg+ is a modified version of TradingView’s built-in Linear Regression indicator. In normal mode it behaves the same as the original script (same math, same channel) — but it adds a few extra tools for longer-term trend work and cleaner risk management. ⸻ What it does • Plots a linear regression line over the last N bars (default 150) to show the dominant trend. • Draws upper and lower channel lines at a chosen number of standard deviations from the regression line. • Highlights when price moves unusually far away from its baseline, which can signal potential exhaustion or mean reversion. • Optionally fits the channel on log(price) so the trend is percentage-based, which is much more realistic for long-term stocks, growth names, and crypto. ⸻ What’s different vs. the original Linear Regression Everything from the standard TradingView Linear Regression is preserved, plus: 1. Use log price (percent-based) • When checked, the regression is computed on log(source) instead of raw price. • This makes the channel scale naturally with percentage moves (e.g., a move from 50 → 100 is treated like 100 → 200). • Very useful on higher timeframes or multi-year trends. 2. Pearson’s R (trend quality) • Optional label that shows Pearson’s correlation coefficient between price and the regression line. • Values near +1 / −1 = strong, clean trend. Values near 0 = choppy, noisy market. 3. Extend lines left / right • Lets you project the channel back in time, forward in time, or both, without redrawing. 4. Default length • Default Length = 150 bars to match a common swing / position-trading look-back out of the box. ⸻ Inputs Channel Settings • Length Number of bars used for the regression calculation (default 150). • Source Price source used for the channel (close by default). • Use log price (percent-based) When enabled, regression is performed on log(price); visually still plotted on the normal scale. • Upper Deviation / Lower Deviation Number of standard deviations above/below the regression line to draw the upper and lower channel. • Use Upper Deviation / Use Lower Deviation Toggle visibility/use of each side of the channel. Display Settings • Show Pearson’s R Shows a label with the correlation coefficient so you can quickly judge trend strength. • Extend Lines Left / Extend Lines Right Controls how far the channel lines are extended on the chart. Color Settings • Separate colors for upper band, lower band, and the filled areas between them. ⸻ How traders often use it • Spot when price is stretched relative to its regression channel (possible fade / reversion zones). • Confirm a trend regime: strong Pearson’s R + price riding the upper band = robust uptrend. • On log mode, see whether a name is accelerating or decelerating in percentage terms over multi-month / multi-year windows. This is a visual tool only – it doesn’t place orders or manage risk for you.
Pine Script® göstergesi
WesPX tarafından
Custom Timeframe Candles [Metrify]This script lets you build custom timeframe candles (like 7m, 11m, 2h, 3D, etc.) by manually aggregating price data from a lower chart timeframe. While it doesn’t fully replace TradingView’s native custom TF — especially in terms of perfect timestamp alignment, it gives you a very close (same calculation) and practical alternative for analysis. How it works Candles are manually aggregated from the current chart timeframe Instead of relying on request.security(), candles are constructed directly from the current chart data. For best results, use a chart timeframe that is divisible and as close as possible to your custom timeframe Example: Custom TF = 10m → use 5m chart (1m chart also works, but the gap will be larger and less efficient) Smaller gaps = cleaner candles, better visual accuracy, and smoother updates
Pine Script® göstergesi
Metrify tarafından
Titan Distance & Momentum [Professional Suite]Are you tired of "whipsaws" and false breakouts? The Titan Distance & Momentum is not just another oscillator. It is a specialized quantitative tool designed to solve the two biggest problems in day trading: Market Exhaustion and Trend Filters. While standard indicators (like RSI or MACD) generate noisy signals, the Titan Distance algorithm focuses on Clarity and Mean Reversion logic. 🚀 KEY FEATURES: 1. Real-Time Distance Dashboard (The "Elastic" Effect) Most traders lose money by buying tops or selling bottoms. This indicator calculates the exact distance (in points) between the current price and the 200-period Moving Average. Visual Alert: The background automatically turns RED or GREEN when the price is statistically "overstretched" (too far from the mean). The Logic: When the background lights up, the "elastic" is stretched. STOP following the trend and prepare for a reversion or pullback. 2. "Quantum" Smoothed Momentum We replaced the jagged, hard-to-read lines of traditional oscillators with a triple-smoothed exponential wave. Green Wave: Positive clean momentum (Safe to buy). Red Wave: Negative clean momentum (Safe to sell). Zero Lag: Designed to react faster than standard MACD but smoother than raw RSI. 🎯 HOW TO USE IT: Trend Following: Only take BUY trades when the Wave is Green and rising above the Zero Line. The Filter: If your strategy gives a signal, LOOK DOWN. Is the background colored (Red/Green)? If yes, the market is overextended. Do not enter. Wait for the price to return to the average. Dashboard: Check the label on the right side. It tells you exactly how many points away the price is from the 200 EMA (e.g., "+500 pts"). ⚙️ SETTINGS: Momentum Length: Adjust the sensitivity of the wave. Distance Alert: Set the threshold (in points) to trigger the background color alert (Default: 1000 points for Indices). Designed for precision. Built for professionals.
Pine Script® göstergesi
valeriosilva1 tarafından
Volume ProfileVolume Profile — Daily & Weekly Levels This indicator plots session-based Volume Profile levels directly on the chart, focusing on Daily and Weekly structures. It is designed to help visualize areas where trading activity was most concentrated during the current and previous periods. The script calculates and displays the following levels: POC (Point of Control) — price level with the highest traded volume VAH (Value Area High) — upper boundary of the value area VAL (Value Area Low) — lower boundary of the value area Features Today’s Volume Profile POC, VAH, and VAL updated in real time during the current trading day Yesterday’s Volume Profile Previous day’s POC, VAH, and VAL extended forward as reference levels Current Weekly Volume Profile Live weekly POC, VAH, and VAL Previous Weekly Volume Profile Last week’s completed POC, VAH, and VAL Configurable Inputs Adjustable number of volume bins (rows) Custom value area percentage Toggle visibility for daily, yesterday, weekly, and previous weekly levels Optional labels with configurable horizontal offset How it works The indicator builds a custom volume distribution by aggregating volume across price bins within each session (daily or weekly). From this distribution, it identifies: The price level with maximum volume (POC) The value area surrounding the POC based on the selected percentage All calculations are performed locally using historical bar data, without external data sources. Alerts An alert condition is included that triggers when price crosses any visible Volume Profile level (POC, VAH, or VAL). Notes This indicator is designed for market structure and volume analysis.
Pine Script® göstergesi
Kerbox tarafından
1
Fibonacci Active Timeframe Range [UkutaLabs]█ OVERVIEW Fibonacci Active Timeframe Range is a precision intraday structure tool that uses real-time price expansion combined with Fibonacci ratios to map dynamic support and resistance levels directly from the active timeframe. Rather than relying on fixed historical averages, this indicator continuously builds a live range from current price action, projecting Fibonacci-derived levels that adapt to market conditions as they develop. The goal is to give traders a clear structural framework for: Intraday bias Reaction zones Volatility expansion Pullback levels Continuation targets —all in a clean, visual format that integrates seamlessly into any strategy or system. █ USAGE The indicator calculates the current timeframe range in real time, anchoring from the active session’s open and projecting multiple Fibonacci levels within that range. These levels act as dynamic support and resistance zones, updating as price evolves — allowing traders to: Identify high-probability reaction areas Define structure for entries and exits Frame risk more precisely Align trades with real-time volatility Anticipate expansion and contraction phases Each level is clearly labeled for instant recognition and can be used across scalping, intraday, and short-term swing strategies. █ SETTINGS Configuration • Show Labels – Toggle labels on/off for a clean or informational view • Display Mode – Control how much historical structure is visible • Font Size – Adjust label size for readability • Text Alignment – Align labels relative to each level • Fibonacci Levels – Enable/disable specific ratios • Range Mode – Select how the current timeframe range is calculated
Pine Script® göstergesi
UkutaLabs tarafından
8
SilverHawk OB RadarSilverHawk OB Radar This indicator detects and draws order blocks from recent pivot highs and lows, with mitigation on close or high/low. Features: • Internal and swing order blocks (bullish/bearish) • Quality filter (loose/balanced/strict) • De-duplication of overlapping blocks • Alerts on new blocks Settings: • Show Internal/Swing OB: toggle visibility • Count: max blocks to show • Pivot Length: lookback for pivots • Mitigation: close or high/low for invalidation • Quality Filter: min size and ATR filter • De-duplicate overlaps: remove similar blocks Best used on H1 to D1 timeframes for identifying potential reversal or continuation zones in Forex or indices. Use with proper risk management and confirmation. Educational tool only. Not financial advice. Trading involves risk.
Pine Script® göstergesi
SilverHawkSuite_ tarafından
ALL-IN-ONE RSI System (Cloud Divergence Stoch RSI CM WVF)This indicator combines RSI Cloud structure, original RSI divergence logic, Stochastic RSI timing, and the original CM Williams Vix Fix into a single clean framework. It is designed to identify momentum shifts, divergences, and fear-based dip zones without repainting or overfitting. Key features: RSI Cloud with customizable overbought / oversold zones Original RSI divergence logic (regular & hidden) Stochastic RSI for timing confirmation Original CM Williams Vix Fix behavior (panic detection) Optional BUY / SELL labels with filters Fully customizable colors and visibility Best used as a decision-support system, not as a standalone signal generator. Not financial advise
Pine Script® göstergesi
ethem11 tarafından
EMA Fractal Bias"EMA Fractal Bias" overlays on TradingView charts to detect directional bias for scalping on futures like NQ/ES. It computes three smoothed EMAs (fast 3/2, mid 9/3, slow 20/5, configurable) for stacking checks (bullish: fast > mid > slow; bearish: reverse). Williams Fractals (period 2 default) identify potential breaks: close above up-fractal high for long, below down-fractal low for short. Bias logic: Tracks last up/down fractal. On break, if stacked aligns, sets bias (long/short) and resets broken fractal. If no stack, sets pending flag and neutral bias; confirms on later bars if stack turns true. Shading teal for long, purple for short, orange for neutral, with intra-bar previews. Debug toggle adds event labels and status on last bar. Non-repainting, evaluates on close.
Pine Script® göstergesi
ChannelFisher tarafından
Reversal Detector [Scalping-Algo]Reversal Detector - Volume-Based Price Structure Analysis ─────────────────────────────────────────── WHAT IT DOES This indicator identifies potential reversal zones by analyzing price structure combined with volume. Instead of using traditional overbought/oversold readings or single candlestick patterns, it looks for a specific two-phase setup: Phase 1 - Anchor Detection: The script scans for bars where price closes beyond ALL previous bars in the lookback period. For a bullish setup, the close must be lower than every low of the past N candles (default 20). This represents an extreme extension, not just a "lower low." Volume on this bar should exceed 2x the average to confirm real participation. Phase 2 - Confirmation: After an anchor forms, the indicator waits for price to reverse back through the anchor bar's range. This must occur within a set number of bars (default 3). If price continues making new extremes instead, the setup is cancelled. ──────────────────────────────────────────────────────────────── HOW TO READ THE SIGNALS B Labels (Green, below price) = Bullish reversal confirmed S Labels (Red, above price) = Bearish reversal confirmed Each signal shows a score from 3/5 to 5/5: - 3/5 = Basic confirmation met - 4/5 = Good volume on anchor or confirmation - 5/5 = Strong volume + aligned with 200 EMA trend Dashed Boxes = Pending setup waiting for confirmation - Green box = Bullish setup in progress - Red box = Bearish setup in progress Status Panel (bottom right): - Shows current state (Scanning / Bull Setup / Bear Setup) - Countdown for confirmation window - Current volume condition ──────────────────────────────────────────────────────────────── HOW TO USE Entry Approach: 1. Wait for a confirmed signal (B or S label appears) 2. Higher scores (4/5 or 5/5) indicate better quality setups 3. Consider the overall trend context - signals aligned with the 200 EMA direction tend to work better Stop Placement: - For long entries: below the anchor bar's low - For short entries: above the anchor bar's high The boxes show you the anchor zone while waiting for confirmation, which can help visualize the invalidation level. ──────────────────────────────────────────────────────────────── SETTINGS Structure Settings: - Lookback Period (default 20): How many bars back to check for the breakout. Lower = more setups but less extreme. Higher = fewer but more significant extensions. - Confirmation Bars (default 3): Maximum bars allowed for price to reverse. Tighter window = stricter filter. Volume Settings: - Use Volume Filter: Toggle volume requirement on/off - Volume MA Length (default 20): Period for average volume calculation - Anchor Volume Multiple (default 2.0): Required volume spike on anchor bar - Confirm Volume Multiple (default 1.2): Volume threshold on confirmation bar Visual Settings: - Trend EMA Length (default 200): Used for trend alignment scoring - Show Pending Setups: Display the dashed boxes for active setups - Show Status Panel: Display the info table - Colors and label size customization ──────────────────────────────────────────────────────────────── WHAT MAKES THIS DIFFERENT The core idea is requiring price to break beyond EVERY bar in the lookback range, not just make a swing high/low. This filters out minor pullbacks and focuses on genuine extensions where price has moved significantly. The two-phase approach (anchor then confirmation) helps avoid catching falling knives - you're not entering just because price is extended, but waiting for actual reversal evidence. Volume integration adds another layer. The anchor bar needs elevated volume to confirm real selling/buying pressure, not just a gap or illiquid move. ──────────────────────────────────────────────────────────────── SUGGESTED USE Works on any timeframe, but I find it most useful on 5-15 minute charts for intraday setups. Combine with: - Key support/resistance levels - Higher timeframe trend direction - Market context (avoid during major news) The indicator identifies the pattern mechanically - it doesn't predict outcomes. Use proper position sizing and always have a stop loss plan. ──────────────────────────────────────────────────────────────── ALERTS INCLUDED - Bullish Reversal - Bearish Reversal - Any Reversal - Strong Bullish (4/5 or higher) - Strong Bearish (4/5 or higher) ────────────────────────────────────────────────────────────────
Pine Script® göstergesi
A1TradingHub tarafından
Leswin Stocks Ribbon Signals (SPY/QQQ) Leswin Ribbon Signals – Day Trading Indicator (Stocks & Crypto) Leswin Ribbon Signals is a trend-based momentum indicator designed for day traders and scalpers who trade stocks, ETFs, options, and crypto. Built for fast execution on 5m, 15m, and 1H timeframes, it uses a dynamic EMA ribbon, trend filtering, and volatility conditions to help identify high-probability BUY and SELL zones while avoiding low-quality chop. Features: • Trend-following EMA ribbon • Automatic higher-timeframe trend filter • Smart BUY & SELL signals • Volatility (ATR) filter to avoid dead zones • Regular Trading Hours (RTH) filter for stocks • Optimized for SPY, QQQ, DIA, IWM, TSLA, AAPL, META • Works on crypto, forex, and futures • Mobile-friendly • Non-repainting logic This indicator is best used as a confirmation tool, not a standalone system. Always combine with your own levels, structure, and risk management.
Pine Script® göstergesi
leswin_trades tarafından
SilverHawk Trend FlowSilverHawk Trend Flow This indicator colors candles based on trend direction using a smoothed momentum calculation. Features: • Trend candles colored green/red based on direction • Alerts on new up/down trend detection Settings: • Show Trend Candles: toggle colored candles on/off (default true) • Enable Alerts: toggle trend change alerts (default true) • Up Low/High & Down Low/High: customize candle gradient colors Best used on H1 to D1 timeframes for identifying trend changes in Forex or indices. Combine with proper risk management and confirmation. Educational tool only. Not financial advice. Trading involves risk.
Pine Script® göstergesi
SilverHawkSuite_ tarafından
[TehThomas] - Aligned Timeframe Liquidity Sweeps█ OVERVIEW The Liquidity Sweeps ICT MTF indicator automatically detects and visualizes buyside and sellside liquidity levels based on higher timeframe (HTF) swing points. Designed specifically for traders using Smart Money Concepts and ICT (Inner Circle Trader) methodology, this tool helps identify where institutional players are likely hunting liquidity before making directional moves. █ KEY FEATURES ✓ Automatic ICT-Aligned Timeframe Selection • Intelligently selects the higher timeframe based on your current chart • Follows ICT's recommended correlations (5min→1h, 15min→4h, 1h→Daily, etc.) • No manual timeframe selection needed - adapts automatically ✓ Precise Liquidity Level Placement • Lines start exactly at the LTF candle that created the HTF swing point • Searches backwards through historical data to find exact placement • Eliminates guesswork about where institutional orders cluster ✓ Real-Time Sweep Detection • Solid lines indicate untouched liquidity (active levels) • Lines automatically turn dotted when price sweeps through them • Swept lines stop at the exact bar of the sweep (clean visualization) • Both wicks and candle bodies trigger sweep detection ✓ Fully Customizable Per Timeframe • Individual swing detection settings for each HTF (1m, 15m, 1h, 4h, D, W, M) • Adjust sensitivity to show major levels only or capture granular liquidity pools • Customizable colors and line width • Organized settings groups for easy navigation █ HOW IT WORKS The indicator identifies swing highs and swing lows on a higher timeframe using pivot point detection. These swing points represent areas where stop-loss orders from retail traders concentrate, creating "liquidity pools" that smart money targets. Timeframe Alignment (Automatic): • 15s chart → 1min HTF • 1min chart → 15min HTF • 5min chart → 1hour HTF • 15min chart → 4hour HTF • 1hour chart → Daily HTF • 4hour chart → Weekly HTF • Daily chart → Monthly HTF Swing Detection: The indicator uses customizable left/right bar counts to identify valid swing points on the HTF. Default values are optimized per timeframe (e.g., 10 bars for 1h, 5 bars for Daily), but can be adjusted to your preference. Visualization: • Green lines = Buyside liquidity (swing highs where long stops sit) • Red lines = Sellside liquidity (swing lows where short stops sit) • Solid style = Untouched liquidity • Dotted style = Swept liquidity █ SETTINGS Swing Detection Group: • Swing Bars - 1 Minute: Default 5 bars • Swing Bars - 15 Minutes: Default 8 bars • Swing Bars - 1 Hour: Default 10 bars • Swing Bars - 4 Hours: Default 6 bars • Swing Bars - Daily: Default 5 bars • Swing Bars - Weekly: Default 3 bars • Swing Bars - Monthly: Default 2 bars Tip: Increase values for cleaner charts with major levels only. Decrease for more sensitive detection. Display Group: • Buyside Liquidity Color: Default green • Sellside Liquidity Color: Default red • Line Width: Adjustable 1-5 █ HOW TO USE Reading the liquidity levels: 🟢 Green solid line = Untouched buyside liquidity (potential magnet for price) 🔴 Red solid line = Untouched sellside liquidity (potential magnet for price) 🟢 Green dotted line = Swept buyside liquidity (bulls trapped) 🔴 Red dotted line = Swept sellside liquidity (bears trapped) Trading Applications: 1. Liquidity Grab Reversals: Watch for sweeps followed by immediate reversals 2. Stop Hunt Detection: Multiple sweeps often precede strong counter-moves 3. Target Identification: Use untouched levels as potential price magnets 4. Market Structure Analysis: Understand institutional order flow 5. Confluence Zones: Combine with order blocks, FVGs, or other ICT concepts Best Practices: • Focus on liquid markets (major FX pairs, indices, large-cap stocks) • Consider higher timeframe trend - sweeps against trend are higher probability • Look for liquidity clusters (multiple levels close together) • Wait for confirmation after sweeps before entering • Not all sweeps result in reversals - context matters █ TRADING STRATEGY EXAMPLES Liquidity Sweep Reversal: 1. Identify untouched liquidity level 2. Wait for price to sweep through (line turns dotted) 3. Look for reversal price action (engulfing, rejection) 4. Enter in reversal direction with stop beyond the sweep 5. Target next liquidity level or structure Liquidity-to-Liquidity: 1. Price sweeps sellside liquidity (red dotted) 2. Enter long positions 3. Target buyside liquidity above (green solid) 4. Exit when buyside liquidity is swept █ IDEAL FOR • ICT Methodology Traders • Smart Money Concept Practitioners • Liquidity-Based Strategies • Multi-Timeframe Analysis • Price Action Traders • Stop Hunt Avoidance █ TECHNICAL SPECIFICATIONS • Maximum Lines: 500 • Lookback Range: Up to 1000 bars for precise placement • Compatible: All markets and timeframes • Data: Works on both real-time and historical bars █ NOTES & DISCLAIMERS • This indicator is a tool for analysis, not a standalone trading system • Always use proper risk management and combine with other analysis • Performance may vary across different markets and conditions • Based on ICT concepts - familiarity with Smart Money trading is recommended █ LIQUIDITY FOR SINGLETIMEFRAMES If you prefer normal liquidity lines you can use my other free liquidity indicator
Pine Script® göstergesi
TehThomas tarafından
7
Advisor CORE + MOMENTUM (Weekly) - ROC/EMA📊 Advisor CORE + Momentum (Weekly) This indicator provides a rule-based portfolio management view, clearly separating long-term structure, risk monitoring, and entry timing, with a logic designed to support position review decisions, not mechanical trading. It answers a single question: Is this asset still justified at its current portfolio weight? 🔹 CORE — Structure & Risk Review The CORE layer evaluates structural trend and long-term cycle, with an explicit review state to detect early deterioration: Weekly price relative to a long-term EMA Long-term Rate of Change (ROC) strength and direction Long-term EMA slope CORE states: BUY / HOLD Structure intact, long-term momentum strong. HOLD Structure still valid, but losing strength or under pressure. REVIEW Price below the long-term EMA and long-term momentum weakening. Signals that the position should be actively reviewed. REDUCE Long-term momentum turned negative, indicating structural deterioration. This allows risk to be addressed before a full trend break occurs. 🔹 MOMENTUM — CANSLIM Timing Discipline The MOMENTUM layer applies strict CANSLIM entry rules, explicitly blocking any buy condition without valid timing: BUY Price above the short-term EMA, short-term EMA above the long-term EMA, long-term EMA rising. HOLD / WAIT Structure intact, but price below the short-term EMA. NO OPERATE Price below the long-term EMA or trend conditions failing. This ensures that structure alone never justifies a buy, enforcing discipline between trend quality and entry timing. 🔗 Combined Use This indicator is designed to be used together with: ROC Triple (13 / 26 / 52) The ROC Triple provides visual momentum context, while the Advisor translates structure and timing into clear, portfolio-oriented guidance. ⚠️ Important Notes This is not a trading system. It does not generate entry or exit signals. It does not define position size or timing. Its purpose is to standardize portfolio review decisions, reduce emotional bias, and maintain discipline across changing market regimes.
Pine Script® göstergesi
carlos_naon67 tarafından