SMA+MACD+RSI+Stoch Entry📌 Tools Used:
• SMA 21, SMA 50, SMA 200
• MACD (12, 26, 9)
• Pivot Point Standard
• RSI (length 75)
• Stochastic (14, 3, 3)
Trading Timeframe:
• Usable on all timeframes
Chart Preparation:
• Analyze the overall market trend and the instrument being traded
• Set an appropriate timeframe according to the market
• Apply SMA 21, SMA 50, SMA 200
• Apply MACD and Pivot Point Standard
• Ensure a proper market trend by checking the position of SMA 21, SMA 50, and SMA 200 relative to each other
If there are too many crossings between SMA 21, SMA 50, and SMA 200, do not enter any trades until the market trend stabilizes
Conditions for Entering a Long Trade (Bullish Trigger):
• Candle closes above the pivot line
• Confirm an uptrend by checking that SMA 21 is above SMA 50, and SMA 50 is above SMA 200
• RSI is above the midpoint
• Presence of a suitable corrective step with normal slope, considering the strength of the previous step
• MACD histogram indicates bullish momentum
• Stochastic shows a bullish crossover from below
Conditions for Entering a Short Trade (Bearish Trigger):
• Candle closes below the pivot line
• Confirm a downtrend by checking that SMA 21 is below SMA 50, and SMA 50 is below SMA 200
• RSI is below the midpoint
• Presence of a suitable corrective step with normal slope, considering the strength of the previous step
• MACD histogram indicates bearish momentum
• Stochastic shows a bearish crossover from above
Stokastik Osilatör
MTF Oscillator Stack [BigBeluga]🔵 OVERVIEW
The MTF Oscillator Stack brings powerful multi-timeframe momentum analysis directly into your price chart. You can select one oscillator— RSI , MFI , or Stochastic RSI —and display it across up to 4 different timeframes. Each panel is neatly stacked horizontally above price , offering quick insight into cross-timeframe conditions like trend direction, exhaustion zones, and momentum shifts.
🔵 CONCEPTS
Single Oscillator Mode: Select one oscillator type (RSI, MFI, or Stoch RSI) to analyze across all selected timeframes.
Top-Chart Horizontal Panels: Oscillator plots are aligned horizontally at the top of the chart for seamless top-down reading.
Signal Comparison Arrows: Arrows (🢁 / 🢃) indicate oscillator position relative to its signal line.
Overbought/Oversold Zones: Transparent 30–70 fill zones highlight key reversal areas.
Dynamic Display Logic: Only enabled panels are shown; spacing adjusts based on active timeframes.
Timeframe Tagging: Each oscillator panel is labeled with its corresponding timeframe (e.g., 1H, 2H, 4H).
🔵 FEATURES
Choose one oscillator (RSI, MFI, or Stoch RSI) and apply it across up to 4 timeframes.
Each oscillator panel includes: price-synced plot, signal line, and zone shading.
Scale alignment allows users to place charts at the bottom or top.
Clear arrow signals show whether oscillator is bullish or bearish.
Individual length and signal settings per timeframe.
Toggle for alignment mode: evenly spaced or floating layout.
All panels use a consistent layout for faster decision-making.
🔵 HOW TO USE
Select your preferred oscillator and activate 2–4 key timeframes (e.g., 1H, 4H, D1, W1).
Use signal crossovers as a bullish (🢁) or bearish (🢃) trend cue.
Look for aligned extremes (e.g., all timeframes overbought) to spot momentum exhaustion.
Ideal for momentum confluence strategies and top-down confirmation.
Use horizontal layout to stay focused on price while assessing broader structure.
🔵 CONCLUSION
MTF Oscillator Stack simplifies complex multi-timeframe momentum analysis into one clean, actionable visual. Whether you're tracking RSI, MFI, or Stoch RSI, this tool helps you stay aligned with the broader trend—without ever leaving your main chart.
EMAs CrossoverThis Pine Script strategy identifies bullish and bearish crossovers among four EMAs (5, 13, 26, and 50 periods) with an additional alignment condition for the EMAs. It can generate alert when:
Bullish Condition: An EMA crossover occurs (5 crossing over 13, 13 over 26, or 26 over 50), and all the shorter-period EMAs are above the longer-period EMAs, indicating a strong upward trend.
Bearish Condition: An EMA crossunder happens (5 crossing under 13, 13 under 26, or 26 under 50), and all shorter EMAs are below the longer EMAs, suggesting a strong downward trend.
The strategy uses these conditions to enter long positions on bullish signals and short positions on bearish signals.
quad Stoch'sIt's like a Stochastic Oscillator, but there are four of them. Wait for all four to show overbought or oversold and then enter once the fastest moving oscillator breaks out
iDea Stochastic Divergence Pro iDea TradeThis indicator automatically detects and highlights bullish and bearish divergences using the Stochastic oscillator.
Main features:
Automatic detection of bullish & bearish divergences
Clear visual signals: red (bearish) and green (bullish) lines
Overbought/oversold zone dots
Price filter option for more reliable divergences
Alerts for reversal and divergence completion
Customizable thresholds and smoothing settings
How to use:
Look for red or green divergence lines for potential trend reversals. Dots in overbought/oversold areas signal possible turning points. Combine with your own analysis for best results.
Note:
This script does not provide buy/sell signals. It is for technical analysis only and is not financial advice. Please use proper risk management.
Protected script. Source code is hidden but free for all TradingView users.
TTL Quad stochastic🧠 The Traders' Light — Quad Stochastic Viewer v1
Script name: TTL Quad Stochastic
Version: v2
Author: The Traders’ Light
Follow us: @thetraderslight on X
🎯 What it does
This script visualizes four smoothed stochastic indicators on a single pane, providing a unique multi-speed momentum perspective. It’s designed to help traders identify high-confluence overbought/oversold conditions, especially when all stochastic curves align in extreme zones.
📐 Indicators used
The script calculates and displays the following smoothed stochastics:
Stoch 9-3 — fast reaction
Stoch 14-3 — standard
Stoch 40-4 — mid-term filter
Stoch 60-10 — long-term context
Overbought and oversold levels are visually marked at 80 and 20, respectively.
🔔 Signal logic
Background highlights are triggered when all four stochastics align:
✅ Green background when all stochastics are below 20 (oversold)
❌ Red background when all stochastics are above 80 (overbought)
Webhook alerts are also available:
Bullish Align Alert when all stochastics < 20
Bearish Align Alert when all stochastics > 80
🔧 How to use it
Use this tool as a momentum filter to confirm entries or avoid low-confluence zones. Combine it with trend structure, volume, or other TTL indicators for optimal setups.
⚠️ Important
This is not a buy/sell signal indicator. It is a visual aid intended to support your analysis, not to replace it.
Always use in conjunction with your own strategy and risk management.
Trading involves significant risk and may result in financial loss.
Use at your own discretion and responsibility.
TTL Quad stochastic🧠 The Traders' Light — Quad Stochastic Viewer v2
Script name: TTL Quad Stochastic
Version: v2
Author: The Traders’ Light
Follow us: @thetraderslight on X
🎯 What it does
This script visualizes four smoothed stochastic indicators on a single pane, providing a unique multi-speed momentum perspective. It’s designed to help traders identify high-confluence overbought/oversold conditions, especially when all stochastic curves align in extreme zones.
📐 Indicators used
The script calculates and displays the following smoothed stochastics:
Stoch 9-3 — fast reaction
Stoch 14-3 — standard
Stoch 40-4 — mid-term filter
Stoch 60-10 — long-term context
Overbought and oversold levels are visually marked at 80 and 20, respectively.
🔔 Signal logic
Background highlights are triggered when all four stochastics align:
✅ Green background when all stochastics are below 20 (oversold)
❌ Red background when all stochastics are above 80 (overbought)
Webhook alerts are also available:
Bullish Align Alert when all stochastics < 20
Bearish Align Alert when all stochastics > 80
🔧 How to use it
Use this tool as a momentum filter to confirm entries or avoid low-confluence zones. Combine it with trend structure, volume, or other TTL indicators for optimal setups.
⚠️ Important
This is not a buy/sell signal indicator. It is a visual aid intended to support your analysis, not to replace it.
Always use in conjunction with your own strategy and risk management.
Trading involves significant risk and may result in financial loss.
Use at your own discretion and responsibility.
Blue DotThis indicator identifies high-probability long entry signals by combining stochastic momentum analysis with moving average trend confirmation. It's designed to catch oversold bounces in stocks that are already in established uptrends.
Blue DotThis indicator identifies high-probability long entry signals by combining stochastic momentum analysis with moving average trend confirmation. It's designed to catch oversold bounces in stocks that are already in established uptrends.
MTF Stochastic Trendline Drawing Trendlines Using Stochastic on Multi-Timeframes (MTF)
Instead of drawing trendlines directly on price charts, this method focuses on drawing trendlines on the Stochastic Oscillator (%K line) to analyze momentum trends across different timeframes.
The Stochastic Oscillator measures momentum — how strong or weak price movements are. By analyzing its shape and direction across multiple timeframes, and drawing trendlines on the %K line, you can better understand potential market reversals, continuation points, or breakout signals.
[volfgang] wave.liteThe wave.lite indicator is a simplified version of my WAVE momentum tracker indicator, designed to help traders identify market trends by analysing price action across multiple timeframes. As a simplified version of my full WAVE script, it focuses on core momentum signals and confluence for the current timeframe only.
Quick Summary
The Lite WAVE features a signal line that alternates between Red (bearish) and Blue (bullish).
It turns Blue when the WAVE line crosses above the signal and holds for 1 bar.
It turns Red when the WAVE line crosses below the signal and holds for 1 bar.
Under The Hood
The Lite WAVE aggregates close, high, low, and EMA data over a set period to measure recent price extremes and midpoint deviations, emphasizing newer action. It calculates averages for high-to-high and low-to-low differences to derive the WAVE value, smoothed for trend determination.
This lite version omits advanced divergence, specialist info box, confluence scanner and signal features from the full WAVE, focusing on momentum tracking for simplicity. It's suitable for all markets and assets; always combine with other analysis—past performance doesn't guarantee future results.
MIGA Trader DNAMIGA Trader DNA is a composite indicator that integrates:
Trend Identification: Uses three exponential moving averages (fast, mid, slow) to determine market bias based on their order.
Momentum Filter: An adaptive RSI whose period automatically matches the fastest EMA highlights overbought or oversold conditions.
Entry Timing: A Stochastic %K crossover signals precise entry points when momentum aligns with trend direction.
Volatility Envelope: An optional, SuperTrend band adjusts dynamically to changing ATR-based volatility.
Visual Signals: Discrete “Buy” and “Sell” labels mark entry opportunities directly on the price chart when all conditions align.
Ehlers Two-Pole StochasticThis indicator implements John Ehlers' Two-Pole Stochastic Filter, a smoother alternative to the traditional stochastic oscillator. Instead of relying on raw %K values, it applies a second-order IIR filter (recursive smoothing) to reduce noise and improve trend clarity.
It outputs a single line oscillating between 0 and 1, with less lag and false signals compared to standard stochastic implementations.
Key Features:
Uses a two-pole filter to smooth the normalized stochastic (%K).
Ideal for detecting clean reversals and trend continuations.
Designed for minimal visual noise and greater signal confidence.
Interpretation:
Values near 1.0 may suggest overbought conditions.
Values near 0.0 may suggest oversold conditions.
Crosses above 0.5 can signal bullish shifts, and below 0.5 bearish shifts.
Recommended Settings:
Default smoothing factor (alpha) is 0.7 — higher values make the output more responsive, while lower values smooth further.
Inspired by concepts from Cybernetic Analysis for Stocks and Futures by John F. Ehlers.
Stochastic Money Flow IndexThe Stochastic Money Flow Index (or Stochastic MFI ), is a variation of the classic Stochastic RSI that uses the Money Flow Index (MFI) rather than the Relative Strength Index (RSI) in its calculation.
While the RSI focuses solely on price momentum, the MFI is a volume-weighted indicator, meaning it incorporates both price and volume data.
The Stochastic MFI is intended to provide a more precise and sensitive reading of the MFI by measuring the level of the MFI relative to its range over a specific period.
Settings
Stochastic Settings
%K Length : The number of periods used to calculate the Stochastic. (Default: 14)
%K Smoothing : The SMA length used to 'smooth' the %K line. (Default: 3)
%D Smoothing : The SMA length used to 'smooth' the %D line. (Default: 1)
Money Flow Index Settings
MFI Length : The number of periods used to calculate the Money Flow Index. (Default: 14)
MFI Source : The source used to calculate the Money Flow Index. (Default: close)
Additional Settings
Show Overbought/Oversold Gradients? : Toggle the display of overbought/oversold gradients. (Default: true)
Stochastic SuperTrend [BigBeluga]🔵 OVERVIEW
A hybrid momentum-trend tool that combines Stochastic RSI with SuperTrend logic to deliver clean directional signals based on momentum turns.
Stochastic SuperTrend is a straightforward yet powerful oscillator overlay designed to highlight turning points in momentum with high clarity. It overlays a SuperTrend-style envelope onto the Stochastic RSI, generating intuitive up/down signals when a momentum shift occurs across the neutral 50 level. Built for traders who appreciate simplicity without sacrificing reliability.
🔵 CONCEPTS
Stochastic RSI: Measures momentum by applying stochastic calculations to the RSI curve instead of raw price.
SuperTrend Bands: Dynamic upper/lower bands are drawn around the smoothed Stoch RSI line using a user-defined multiplier.
Momentum Direction: Trend flips when the smoothed Stoch RSI crosses above/below the calculated bands.
Neutral Bias Filter: Directional arrows only appear when momentum turns above or below the central 50 level—adding confluence.
🔵 FEATURES
Trend Detection on Oscillator: Applies SuperTrend logic directly to the Stoch RSI curve.
Clean Entry Signals:
→ 🢁 arrow printed when trend flips bullish below 50 (bottom reversals).
→ 🢃 arrow printed when trend flips bearish above 50 (top reversals).
Custom Multiplier: Adjust sensitivity of SuperTrend band spacing around the oscillator.
Neutral Zone Highlight: Visual zone between 0–50 (green) and 50–100 (red) for quick momentum polarity reference.
Toggle SuperTrend Line: Option to show/hide the SuperTrend trail on the Stoch RSI.
🔵 HOW TO USE
Use 🢁 signals for potential bottom reversals when momentum flips bullish from oversold regions.
Use 🢃 signals for potential top reversals when momentum flips bearish from overbought areas.
Combine with price-based SuperTrend or support/resistance zones for confluence.
Suitable for scalping, swing trading, or momentum filtering across all timeframes.
🔵 CONCLUSION
Stochastic SuperTrend is a simple yet refined tool that captures clean momentum shifts with directional clarity. Whether you're identifying reversals, filtering entries, or spotting exhaustion in a trend, this oscillator overlay delivers just what you need— no clutter, just clean momentum structure.
Aqua MTF Stochastic Oscillator——————————————————————————————————————————————————————————
The Aqua Multi-Timeframe (MTF) Stochastic Oscillator is a comprehensive momentum analysis tool that synthesizes
stochastic data from up to five distinct, user-configurable sources and timeframes into a single, unified view.
--- CORE CONCEPT ---
Traditional oscillators provide insight into one specific timeframe. This indicator overcomes that limitation by
aggregating momentum readings from multiple timeframes. The core principle is to gauge the confluence of momentum
across different market cycles. A strong trend is often characterized by aligned momentum across short-term,
medium-term, and long-term perspectives. This tool visualizes that alignment in a clear, intuitive oscillator.
--- METHODOLOGY ---
For each of the five analysis slots, the script calculates the Stochastic %K line and its corresponding %D signal line.
To allow for direct comparison and weighting, each of these standard 0-100 oscillator values is then normalized
to a bipolar scale of -100 to +100, where 0 represents the neutral midline.
These normalized scores are then blended, according to user-defined weights, into two master composite lines:
1. A master "Score Line" representing the weighted average of the raw %K momentum values.
2. A master "Signal Line" representing the weighted average of the smoothed %D signal values.
--- KEY FEATURES ---
• Multi-Timeframe & Multi-Symbol Analysis: Configure up to five slots, each with its own symbol, timeframe, price source, and stochastic settings.
• Normalized Momentum Scale: All stochastic values are re-scaled to a -100 to +100 range, providing a standardized measure of momentum. Values above 0 indicate bullish momentum, while values below 0 indicate bearish momentum.
• Weighted Composite Score: User-defined weights allow for prioritizing certain timeframes, creating a custom-tailored final momentum reading.
• Dynamic Color-Coding: The color of the master Score Line and each individual timeframe's line instantly changes based on its position relative to its signal line (%K vs. %D). This provides immediate visual feedback on momentum acceleration (bullish) or deceleration (bearish).
--- HOW TO INTERPRET ---
• Crossovers: The interaction between the master Score Line and the Signal Line can be used to identify potential shifts in momentum, similar to a traditional MACD.
• Line Color: The color of the master Score Line itself serves as a primary signal. A bullish color indicates that overall raw momentum is leading smoothed momentum, and vice-versa.
• Overbought/Oversold Levels: Extreme readings near the +100 or -100 levels suggest that the aggregated momentum may be overextended and due for a reversion.
• Zero Line Crosses: When the oscillator crosses above the zero line, it signals that the balance of momentum has shifted to positive territory. A cross below zero signals a shift to negative territory.
• Divergence: Look for divergences where price makes a new high or low, but the oscillator fails to confirm it. This can often signal a pending reversal.
Author: Aquaritek
——————————————————————————————————————————————————————————
Multi TF Oscillators Screener [TradingFinder] RSI / ATR / Stoch🔵 Introduction
The oscillator screener is designed to simplify multi-timeframe analysis by allowing traders and analysts to monitor one or multiple symbols across their preferred timeframes—all at the same time. Users can track a single symbol through various timeframes simultaneously or follow multiple symbols in selected intervals. This flexibility makes the tool highly effective for analyzing diverse markets concurrently.
At the core of this screener lie two essential oscillators: RSI (Relative Strength Index) and the Stochastic Oscillator. The RSI measures the speed and magnitude of recent price movements and helps identify overbought or oversold conditions.
It's one of the most reliable indicators for spotting potential reversals. The Stochastic Oscillator, on the other hand, compares the current price to recent highs and lows to detect momentum strength and potential trend shifts. It’s especially effective in identifying divergences and short-term reversal signals.
In addition to these two primary indicators, the screener also displays helpful supplementary data such as the dominant candlestick type (Bullish, Bearish, or Doji), market volatility indicators like ATR and TR, and the four key OHLC prices (Open, High, Low, Close) for each symbol and timeframe. This combination of data gives users a comprehensive technical view and allows for quick, side-by-side comparison of symbols and timeframes.
🔵 How to Use
This tool is built for users who want to view the behavior of a single symbol across several timeframes simultaneously. Instead of jumping between charts, users can quickly grasp the state of a symbol like gold or Bitcoin across the 15-minute, 1-hour, and daily timeframes at a glance. This is particularly useful for traders who rely on multi-timeframe confirmation to strengthen their analysis and decision-making.
The tool also supports simultaneous monitoring of multiple symbols. Users can select and track various assets based on the timeframes that matter most to them. For example, if you’re looking for entry opportunities, the screener allows you to compare setups across several markets side by side—making it easier to choose the most favorable trade. Whether you’re a scalper focused on low timeframes or a swing trader using higher ones, the tool adapts to your workflow.
The screener utilizes the widely-used RSI indicator, which ranges from 0 to 100 and highlights market exhaustion levels. Readings above 70 typically indicate potential pullbacks, while values below 30 may suggest bullish reversals. Viewing RSI across timeframes can reveal meaningful divergences or alignments that improve signal quality.
Another key indicator in the screener is the Stochastic Oscillator, which analyzes the closing price relative to its recent high-low range. When the %K and %D lines converge and cross within the overbought or oversold zones, it often signals a momentum reversal. This oscillator is especially responsive in lower timeframes, making it ideal for spotting quick entries or exits.
Beyond these oscillators, the table includes other valuable data such as candlestick type (bullish, bearish, or doji), volatility measures like ATR and TR, and complete OHLC pricing. This layered approach helps users understand both market momentum and structure at a glance.
Ultimately, this screener allows analysts and traders to gain a full market overview with just one look—empowering faster, more informed, and lower-risk decision-making. It not only saves time but also enhances the precision and clarity of technical analysis.
🔵 Settings
🟣 Display Settings
Table Size : Lets you adjust the table’s visual size with options such as: auto, tiny, small, normal, large, huge.
Table Position : Sets the screen location of the table. Choose from 9 possible positions, combining vertical (top, middle, bottom) and horizontal (left, center, right) alignments.
🟣 Symbol Settings
Each of the 10 symbol slots comes with a full set of customizable parameters :
Enable Symbol : A checkbox to activate or hide each symbol from the table.
Symbol : Define or select the asset (e.g., XAUUSD, BTCUSD, EURUSD, etc.).
Timeframe : Set your desired timeframe for each symbol (e.g., 15, 60, 240, 1D).
RSI Length : Defines the period used in RSI calculation (default is 14).
Stochastic Length : Sets the period for the Stochastic Oscillator.
ATR Length : Sets the length used to calculate the Average True Range, a key volatility metric.
🔵 Conclusion
By combining powerful oscillators like RSI and Stochastic with full customization over symbols and timeframes, this tool provides a fast, flexible solution for technical analysts. Users can instantly monitor one or several assets across multiple timeframes without opening separate charts.
Individual configuration for each symbol, along with the inclusion of key metrics like candlestick type, ATR/TR, and OHLC prices, makes the tool suitable for a wide range of trading styles—from scalping to swing and position trading.
In summary, this screener enables traders to gain a clear, high-level view of various markets in seconds and make quicker, smarter, and lower-risk decisions. It saves time, streamlines analysis, and boosts overall efficiency and confidence in trading strategies.
Robby DSS Bressert Colored DotsIntroduction
The Robby DSS Bressert Colored Dots is a technical analysis tool designed to measure momentum and identify potential overbought or oversold conditions in a market. It is a visually enhanced version of the Double Smoothed Stochastic (DSS) indicator, which was developed to be a smoother and more responsive version of the traditional Stochastic Oscillator.
This specific version provides at-a-glance information about momentum shifts through the use of colored dots, making it easy to interpret.
The Core Engine: DSS Bressert
The foundation of this indicator is the Double Smoothed Stochastic, a concept attributed to both William Blau and Walter Bressert, who introduced similar ideas. The goal of the DSS is to filter out the "noise" and false signals common in standard oscillators without introducing significant lag.
It achieves this through a two-step smoothing process:
First Smoothing: A standard Stochastic value is calculated based on the price. This value is then smoothed using an Exponential Moving Average (EMA). This creates a cleaner, less erratic line than the raw stochastic.
Second Smoothing: The indicator then takes this newly smoothed line and performs a second Stochastic calculation on it. This result is then smoothed one final time with another EMA.
This double-application of smoothing results in a very clean oscillator line that reacts quickly to price changes but is less prone to whipsaws.
The Visual Modification: "Robby" Colored Dots
The "Robby DSS Bressert Colored Dots" version takes the powerful DSS calculation and adds a unique visual layer for easier interpretation.
Colored Dots: Instead of plotting a continuous line, the indicator displays a dot for each candle. The color of this dot instantly tells you about the indicator's momentum:
Lime/Green dots appear when the DSS value is rising, indicating bullish or positive momentum.
Red dots appear when the DSS value is falling, indicating bearish or negative momentum.
If the value is unchanged, the dot retains the color of the previous one.
The "Robby" Name: In trading communities like Forex Factory and MQL5, it's common for programmers to modify popular indicators. These enhanced versions are often named after the member who created or popularized them. The "Robby" version specifically refers to this popular colored-dot modification of the DSS Bressert.
How to Interpret and Use It
Traders typically use the Robby DSS Bressert Colored Dots in a few key ways:
Momentum Shifts: The most straightforward signal is the change of dot color. A switch from red to lime can signal that downside momentum is waning and a potential move up is beginning. A switch from lime to red signals the opposite.
Overbought & Oversold Conditions: Like a standard stochastic, the indicator uses levels (typically 80 and 20).
When the dots are above 80, the market is considered overbought. A color change from lime to red in this zone can be a strong signal for a potential reversal down.
When the dots are below 20, the market is considered oversold. A color change from red to lime here can signal a potential reversal up.
Trend Confirmation: In a strong uptrend, traders might ignore red dots and use the appearance of lime dots in the oversold zone (or after a minor pullback) as a signal to join the trend. The opposite is true in a downtrend.
---
This is just an indicator that can found publicly online for mt4, and just translated it to Pinescript.
Dual Stochastic Enhanced (with Presets giua64)Script Title: Dual Stochastic Enhanced (with Presets giua64)
Overview:
This indicator enhances the traditional Dual Stochastic strategy, aiming to provide more filtered and potentially reliable trading signals. By integrating dynamic overbought/oversold levels via Bollinger Bands on the slow stochastic, a trend filter based on a moving average, momentum confirmation via RSI, and user-friendly selectable presets, "Dual Stochastic Enhanced" seeks to offer a more robust approach to identifying potential entry points.
Key Features:
Dual Stochastics: Utilizes a slow stochastic (configurable, e.g., 14 periods) as a context filter and a fast stochastic (configurable, e.g., 5 periods) as a signal trigger.
Bollinger Bands on Slow Stochastic: Instead of fixed overbought/oversold levels (80/20), Bollinger Bands are applied to the %K line of the slow stochastic. This creates dynamic zones that adapt to the stochastic's own volatility.
Trend Filter: A moving average (configurable type and length, e.g., EMA 100 as seen in the example chart for general context) on the price helps filter signals, allowing only trades aligned with the prevailing trend.
RSI Confirmation: An RSI oscillator (configurable length, e.g., 14 periods) is used to confirm momentum. Signals require the RSI to cross certain thresholds to validate the strength of the move.
User Presets: Includes presets for "Scalping," "Intraday," and "Swing trading," which quickly set all key parameters to suit different styles and timeframes. A "Custom" option is also available for full manual configuration.
Clear Visual Signals: Long (green) and Short (red) arrows appear on the chart when all entry conditions are met.
Active Zone Highlighting: The background of the indicator panel changes color (green or red) when "active zone" conditions (a combination of stochastics, trend, and RSI) are favorable.
Information Panel: A table in the top-right corner of the indicator panel displays the current status of the selected preset, trend filter, RSI value, and stochastic levels.
Signal Logic:
A LONG signal is generated when:
The fast stochastic %K crosses above its %D line.
The slow stochastic %K line is below its lower Bollinger Band (dynamic oversold condition).
The fast stochastic %K line is also in a low area (e.g., <25) to confirm the trigger is not premature.
The closing price is above the trend moving average (uptrend).
The RSI is above its long confirmation level (e.g., >40), indicating sufficient bullish momentum.
A SHORT signal is generated when:
The fast stochastic %K crosses below its %D line.
The slow stochastic %K line is above its upper Bollinger Band (dynamic overbought condition).
The fast stochastic %K line is also in a high area (e.g., >75).
The closing price is below the trend moving average (downtrend).
The RSI is below its short confirmation level (e.g., <60), indicating sufficient bearish momentum.
How to Use:
Select a Preset suitable for your trading style and the timeframe you are analyzing (e.g., Scalping for M1-M15, Intraday for M5-H1, Swing for H4-D1).
Alternatively, choose "Custom" and manually adjust all parameters (stochastic lengths, smoothing, Bollinger Bands, Moving Average, RSI, confirmation thresholds).
Observe the Information Panel for a quick understanding of the current conditions.
Evaluate the arrow signals, always considering the broader market context, price action, and any other confluences (supports/resistances, chart patterns).
The background highlighting can help quickly identify periods where conditions are aligned for potential trades.
Disclaimer:
This script is provided for educational and informational purposes only. Trading involves significant risk, and past performance is not indicative of future results. Always thoroughly test any strategy or indicator on historical data and on a demo account before risking real capital. The author assumes no responsibility for any losses incurred from the use of this script.
Author: giua64
Mits Pixel BTCUSDStrategy
Using Rsi Stochastic, Hull Moving Average, Price Action and volume differences to get signals
HOW IT WORKS
Pixel parts :
- (U) The first pixel is a pixel that shows a trend during an uptrend, a trend when the market is considered bullish (above the MA line)
- (V) The second pixel is the volume pixel, showing the up and down movement of the buy / sell volume .
- (M) The third pixel is the momentum pixel, showing the market momentum whether it is overbought or oversold.
- (D) The fourth pixel is a pixel that shows a trend during a downtrend, a trend when the market is considered bearish (below the MA line)
When the price opens above the MA line, 3 pixels will appear, namely the first Pixel which is called the Trend up Pixel, Pixel Volume , and also the Momentum Pixel.
When the price opens below the MA line, 3 pixels will appear, namely Pixel Volume , Pixel Momentum, and the bottom one is the Pixel Down Trend.
* Pixel up trend (appears when the open is above the MA line)
- The pixel will show a solid green color when a gap up is opened or volume up, then the close price is greater than the open price.
- The pixel will show a light green color if there is normal strengthening (the close is bigger than the previous day's close without creating a gap up), then the close price is bigger than the open price.
- Pixel will show yellow color if it meets several criteria, for example, close is equal to open or close is bigger than the previous close but close is smaller than open.
- The pixel will show a dark red color when there is attenuation and a Gap down is created, then the close price is smaller than the open price.
- Pixel will show red color if there is normal weakening (close is smaller than the close of the previous day without creating a gap down), then the close price is smaller than the open price.
* Pixel down trend (appears when the open is below the Moving Average)
The pixel color indication is the same as the Trend up Pixel
* Volume Pixel
- The pixel is dark green when there is an increase and a gap up is created and the volume for that day is bigger than the volume of the previous day.
- The pixel will be green if there is a normal strengthening and also the volume for that day is greater than the volume of the previous day, or there is a gap up but the volume is smaller than the volume of the previous day.
- The pixel is yellow if it meets several conditions, for example, the volume of the day is the same as the volume of the previous day.
- The pixel is dark red when there is weakness and a Gap down is created and also the volume of the day's weakness is greater than the volume of the previous day.
- The pixel is red if there is normal weakening and also the volume of the day's weakness is bigger than the previous day's volume , or if there is a gap down but the volume is smaller than the previous day's volume .
* Momentum Pixel (basically StochRSI combined with other HMA , TopBox (Resistance), BottomBox(Support)).
- The pixel is dark green when it meets several conditions, for example the golden cross is below 50.
- The pixel is green if it meets several conditions, for example a golden cross below 50 without Gap up.
- Pixel will be yellow if it meets several conditions, for example k is greater than d and k has entered the overbought area (greater than 80).
- Pixel is dark red when it meets several conditions, for example k is smaller than d and k has entered the overbought area.
- Pixel is red when it meets several conditions, for example k is smaller than d and k is greater than 50 and k is less than 80.
Bar Color
Dark Green : Price Up + Volume Up
Green : Price Up + Volume Down
Dark Red : Price Down + Volume Up
Red : Price Down + Volume Down
Too many details that cannot be detailed one by one , but in broad outline as explained above.
HOW TO USE
* Signals Buy
- Strong Buy : All pixels are green, and Momentum Pixel is dark green.
- Normal Buy : All pixels are green or two dark green (one of them must momentum pixel) and one yellow.
- Spek Buy : * Two green pixels (one of them must momentum pixel) and one yellow or 1 green/dark green in momentum pixel, and other pixels yellow
* Signals Sell
- Strong Sell : All pixels are red, and Momentum Pixel is dark red.
- Normal Sell : All pixels are either red or two dark red (one of them must momentum pixel) and one yellow.
- Spek Sell : Two red pixels (one of them must momentum pixel) and one yellow or 1 dark red in momentum pixel, and other pixels yellow
- Warning Sell : Momentum pixels are dark red, regardless of the color of the other pixels.
* Best use for trading in BTCUSD markets
Thanks for Moderators
RTH Session Range Position (0-100) with EMAA Pine Script indicator designed to help traders understand where the current price is located within the Regular Trading Hours (RTH) session range, from 0 (session low) to 100 (session high). It also plots a smoothed EMA of this position to provide insight into momentum or trend during the RTH session.
What the Indicator Does
Defines RTH (Regular Trading Hours):
Start: 9:30 AM
End: 4:00 PM
These are typical US equity market hours.
Tracks the session's high and low during RTH:
sessionHigh and sessionLow update only during RTH.
Calculates position of the current price within the RTH range:
Formula: ((close - sessionLow) / (sessionHigh - sessionLow)) * 100
Result is a percentage:
0 = at session low
100 = at session high
50 = middle of session range
Calculates an EMA of that position (posEMA):
Smooths out the raw position to help visualize momentum within the range.
Plots and table:
Plots pos and posEMA on a separate chart pane.
Adds horizontal lines at key levels (0, 30, 50, 70, 100).
Table shows current values for Position, EMA, and Range.
Visual cues:
bgcolor highlights when pos crosses over or under the EMA — potential momentum shifts.
Alerts:
Cross above/below 50 (session midpoint).
Cross above/below EMA.
How to Use It Effectively
1. Session Strength & Momentum
Position above 70: Price is near session highs — strong upward momentum.
Position below 30: Price is near session lows — strong downward momentum.
Use the EMA of position to filter out noise and identify trends.
2. Breakout or Reversal Detection
Cross above EMA: Momentum may be turning bullish.
Cross below EMA: Momentum may be turning bearish.
These crosses (especially near mid-levels like 50) can hint at session trend shifts.
3. Range Context for Entries
If you're a mean-reversion trader, look for:
Price > 70 + turning down below EMA → possible short.
Price < 30 + turning up above EMA → possible long.
For breakout traders, you might wait for:
Crosses above 70 with EMA support.
Crosses below 30 with EMA resistance.
4. Confirmation Tool
Use this indicator alongside others to confirm:
Whether price action has strength within the day.
Whether breakouts have real momentum or are extended already.
Stoch Quad Oscillator📘 Stoch Quad Oscillator – User Guide
✅ Purpose
The Stoch Quad Oscillator is a multi-timeframe stochastic oscillator tool that helps traders detect oversold and overbought conditions, momentum shifts, and quad rotation signals using four distinct stochastic configurations. It includes visual cues, customizable parameters, and background highlights to improve decision-making during trend reversals or momentum surges.
🛠️ Inputs & Parameters
⏱ Timeframe
Timeframe for Stochastic Calculation: Defines which chart timeframe to use for stochastic calculations (default is "1" minute). This enables multi-timeframe analysis while on a lower timeframe chart.
📈 Stochastic Parameters
Four different stochastic configurations are used:
Label %K Length %D Smoothing Notes
K9 D3 9 3 Fastest, short-term view
K14 D3 14 3 Moderately short-term
K40 D4 40 4 Medium-term trend view
K60 D10 60 10 Long-term strength
Smoothing Type: Choose between SMA or EMA to control how smoothed the %D line is.
🎯 Levels
Overbought Level: Default 80
Oversold Level: Default 20
These are used to indicate overextended price conditions on any of the stochastic plots.
🔄 Quad Rotation Detection Settings
When enabled, the script detects synchronized oversold/overbought conditions with strong momentum using all 4 stochastic readings.
Enable Quad Rotation: Toggles detection on or off
Slope Calculation Bars: Number of bars used to calculate slope of %D lines
Slope Threshold: Minimum slope strength for signal (higher = stronger confirmation)
Oversold Quad Level: Total of all four stochastic values that define a quad oversold zone
Overbought Quad Level: Total of all four stochastic values that define a quad overbought zone
Oversold Quad Highlight Color: Background color when oversold quad is triggered
Overbought Quad Highlight Color: Background color when overbought quad is triggered
Slope Averaging Method: Either Simple Average or Weighted Average (puts more weight on higher timeframes)
Max Signal Bar Window: Defines how recent the signal must be to be considered valid
📊 Plots & Visual Elements
📉 Stochastic %D Lines
Each stochastic is plotted separately:
K9 D3 – Red
K14 D3 – Orange
K40 D4 – Fuchsia
K60 D10 – Silver
These help visualize short to long-term momentum simultaneously.
📏 Horizontal Reference Lines
Overbought Line (80) – Red
Oversold Line (20) – Green
These help you identify threshold breaches visually.
🌈 Background Highlighting
The indicator provides background highlights to mark potential signal zones:
✅ All Oversold or Overbought Conditions
When all four stochastics are either above overbought or below oversold:
Bright Red if all are overbought
Bright Green if all are oversold
🚨 Quad Rotation Signal Zones (if enabled)
Triggered when:
The combined sum of all four stochastic levels is extremely low/high (below/above oversoldQuadLevel or overboughtQuadLevel)
The average slope of the 4 %D lines is sharply positive (> slopeThreshold)
Highlights:
Custom Red Tint = Strong overbought quad signal
Custom Green Tint = Strong oversold quad signal
These zones can indicate momentum shifts or reversal potential when used with price action or other tools.
⚠️ Limitations & Considerations
This indicator does not provide trade signals. It visualizes conditions and potential setups.
It is best used in confluence with price action, support/resistance levels, and other indicators.
False positives may occur in ranging markets. Reduce reliance on slope thresholds during low volatility.
Quad signals rely on slope strength, which may lag slightly behind sudden reversals.
🧠 Tips for Use
Combine with volume, MACD, or PSAR to confirm direction before entry.
Watch for divergences between price and any of the stochastics.
Use on higher timeframes (e.g., 5m–30m) to filter for swing trading setups; use shorter TFs (1m–5m) for scalping signals.
Adjust oversoldQuadLevel and overboughtQuadLevel based on market conditions (e.g., in trending vs ranging markets).
MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals
English Script Description:
Indicator Title: MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals
1. Overview
The "MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals" indicator is an advanced, multi-faceted analytical tool designed for comprehensive market analysis. It consolidates a detailed multi-timeframe (MTF) dashboard for Stochastic, MACD, and RSI, hierarchical Stochastic alignment signals (S3, S4, S5), PVSRA-based candle coloring, a customizable moving average, optional MA/VWAP filters for signals, and dynamic background coloring into a single, integrated Pine Script™ utility. This indicator aims to provide traders with a deeper market perspective by consolidating multiple layers of analysis onto the current chart.
2. Originality and Usefulness
This script’s originality stems from its comprehensive integration of several distinct analytical methodologies into a cohesive and highly customizable framework. While the core concept for the hierarchical Stochastic signals (S3-S5) was inspired by the work of f56eroon (ابو بتال - خطيرون), this indicator represents a significant original development by Saleh_ABO_RAED. Key original contributions include:
The specific implementation and extensive customization of the MTF dashboard displaying Stochastic, MACD, and RSI across five user-defined timeframes.
The seamless integration of PVSRA ( Volume) candle coloring, providing an immediate visual layer of volume confirmation.
The inclusion of a fully customizable general-purpose Moving Average.
The advanced and independent MA and VWAP filtering options for the S3-S5 Stochastic signals.
The overall script architecture that allows these diverse components to work synergistically.
Justification for Mashup:
This indicator is designed to provide a multi-dimensional view of the market, which is often necessary for robust trade decision-making. By combining:
MTF Analysis (Dashboard & Signals): To understand the broader context and identify signals aligning across multiple perspectives.
Momentum & Trend (Stoch, MACD, RSI, MA): To gauge the strength and direction of price movements.
Volume Analysis (PVSRA): To assess the conviction behind price action.
Signal Filtering (MA/VWAP): To enhance the reliability of generated signals.
This "mashup" is justified by its utility in helping traders identify higher-probability setups through the confluence of these varied analytical signals, all within a single tool, thus reducing chart clutter and streamlining the analytical process. The script is useful for traders who appreciate a detailed, layered approach to market analysis and seek to confirm signals from multiple non-correlated perspectives.
Practical Benefit for Traders:
This tool empowers traders to:
Quickly assess market conditions across multiple timeframes and key indicators.
Identify potential trade entries based on hierarchical Stochastic signals, confirmed by PVSRA and optional MA/VWAP filters.
Visually gauge market strength and conviction through PVSRA candle coloring.
Utilize a customizable MA for trend direction and dynamic support/resistance.
Make more informed decisions by considering a confluence of analytical factors.
3. Key Features
Multi-Timeframe Dashboard (Stochastic, MACD, RSI): Displays Stochastic (%K, %D, Status), MACD (Line, Signal, Status), and RSI (Value, SMA, Status) for up to five user-configurable timeframes (TF1 to TF5).
Hierarchical Stochastic Alignment Signals (S3, S4, S5): Generates signals based on a sequence of Stochastic confirmations across TF1-TF5, with user-defined K-level thresholds for initial crosses and subsequent confirmations.
PVSRA Candle Coloring: Integrates PVSRA logic to color candles based on volume and price action analysis (e.g., Bullish/Bearish 200% Volume, 150% Volume, Normal Volume candles). Option to override current symbol for PVSRA calculation.
Customizable Moving Average (MA): Plots a user-selectable MA (SMA or EMA) with configurable length, source, color, and width.
Dual Independent Optional Signal Filters (for S3-S5 signals):
MA Filter: Optionally filter S3-S5 signals using a separate configurable MA (SMA, EMA, WMA).
VWAP Filter: Optionally filter S3-S5 signals using VWAP with advanced anchoring options.
Customizable Background Coloring: Optionally colors the chart background when Stochastic indicators on TF3, TF4, and TF5 are in bullish or bearish alignment.
Extensive Customization: Configure all timeframes, all indicator parameters (Stoch, MACD, RSI, PVSRA colors, MA settings, VWAP settings), signal confirmation K-levels, table appearance, and alert conditions.
Alerts: Defines multiple alert conditions for S3, S4, and S5 Bullish/Bearish alignment signals, with alert messages indicating active filters.
4. How It Works
MTF Data & Dashboard: The script fetches and calculates Stochastic, MACD, and RSI data for each of the five user-defined timeframes using request.security with barmerge.lookahead_on to prevent future data leakage. This data populates the on-chart table.
PVSRA Candle Coloring: Analyzes each bar's volume and price range against historical averages (e.g., 10-period SMA of volume) to identify candles with significantly high volume (e.g., >=150% or >=200% of average) or high "value2" (volume * range), coloring them accordingly to denote strong buying or selling pressure.
Stochastic Signal Generation (S3-S5):
An initial Stochastic cross on TF1 (optionally filtered by K-level) serves as the trigger.
This cross is then confirmed sequentially by congruent Stochastic conditions (K above/below D, and K above/below user-defined confirmation levels) on TF2, TF3 (for an S3 signal), then TF4 (for S4), and finally TF5 (for S5).
MA & VWAP Signal Filtering: If enabled, generated S3-S5 signals are only plotted (and trigger alerts) if the price also satisfies the condition relative to the chosen MA (e.g., price > MA for longs) and/or VWAP. Both MA and VWAP lines can be plotted independently.
Background Coloring: Based on the consensus of Stochastic states (bullish/bearish) on TF3, TF4, and TF5.
5. How to Use
Configure Timeframes & Base Indicators: Set up your desired MTF levels (TF1-TF5) and the parameters for Stoch, MACD, and RSI via the script's "Settings/Inputs" dialogue.
Configure PVSRA & General MA: Enable/disable PVSRA candle coloring and the general MA plot; adjust their respective parameters (colors, lengths, types).
Set Stochastic Signal Parameters:
Adjust K-level thresholds for TF1 Stochastic crosses (set to 0 for bull/100 for bear to disable K-level entry filter).
Configure K-level confirmation thresholds for TF2-TF5.
Configure Optional MA/VWAP Signal Filters: Independently enable plotting and/or signal filtering for the MA and/or VWAP; choose their types, lengths, and anchor periods.
Interpret:
Dashboard: For an overview of market conditions.
PVSRA Candles: For volume confirmation of price movements.
S3-S5 Signals: As potential indications of strengthening multi-timeframe Stochastic alignment. The more filters a signal passes (MA, VWAP), the more confluent it might be considered.
MA/VWAP Lines: As dynamic support/resistance or trend indicators.
Background Color: For quick visual assessment of broader Stochastic momentum.
Setting Up Alerts: Add the indicator to your chart. Click the "Alert" button in TradingView, select this indicator under "Condition," and choose from the defined alert conditions (e.g., "Stoch TF3 Bullish Alignment"). Alert messages will indicate active filters.
6. Important Considerations / Disclaimer
This indicator provides analytical tools and potential signals; it is not a standalone trading system and does not guarantee profits.
Always use in conjunction with your trading strategy, risk management, and other analyses. Test thoroughly.
The effectiveness of filters and signals varies with market conditions and assets. Experimentation with settings is crucial.
This script is for educational/informational purposes only and is not financial advice. Trading involves substantial risk. The author, Saleh_ABO_RAED, is not responsible for any trading decisions based on this indicator.
7. Credits
The hierarchical Stochastic signal logic (S3-S5) and the initial strategic framework were inspired by the work of f56eroon (ابو بتال - خطيرون). This script, "MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals," represents an original development by Saleh_ABO_RAED, featuring the specific MTF dashboard implementation for Stochastic, MACD, and RSI, the integration of PVSRA candle coloring and a general Moving Average, advanced MA/VWAP signal filtering, background coloring, and the overall customizable script architecture.
Arabic Script Description (الوصف العربي للإسكريبت):
عنوان المؤشر: MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals
1. نظرة عامة
مؤشر "MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals" هو أداة تحليلية متقدمة ومتعددة الأوجه مصممة للتحليل الشامل للسوق. يدمج هذا المؤشر لوحة معلومات مفصلة متعددة الأطر الزمنية (MTF) لمؤشرات ستوكاستيك، الماكد (MACD)، ومؤشر القوة النسبية (RSI)، مع إشارات ستوكاستيك الهرمية التوافقية (S3, S4, S5)، وتلوين الشموع بناءً على PVSRA، ومتوسط متحرك قابل للتخصيص، وفلاتر اختيارية (MA و VWAP) للإشارات، وتلوين ديناميكي للخلفية، كل ذلك في أداة واحدة متكاملة مبرمجة بلغة Pine Script™. يهدف هذا المؤشر إلى تزويد المتداولين بمنظور أعمق للسوق من خلال دمج طبقات تحليل متعددة على الرسم البياني الحالي.
2. الأصالة والفائدة
تنبع أصالة هذا الإسكريبت من تكامله الشامل للعديد من المنهجيات التحليلية المتميزة ضمن إطار عمل متماسك وقابل للتخصيص بدرجة عالية. بينما المفهوم الأساسي لإشارات ستوكاستيك الهرمية (S3-S5) مستوحى من f56eroon (ابو بتال - خطيرون)، يمثل هذا المؤشر تطويراً أصيلاً وجوهرياً قام به Saleh_ABO_RAED. تشمل المساهمات الأصلية الرئيسية ما يلي:
التنفيذ المحدد والتخصيص الشامل للوحة معلومات MTF التي تعرض ستوكاستيك، الماكد، ومؤشر القوة النسبية عبر خمسة أطر زمنية يحددها المستخدم.
التكامل السلس لتلوين شموع PVSRA (، الحجم، )، مما يوفر طبقة تأكيد مرئية فورية للحجم.
إدراج متوسط متحرك عام قابل للتخصيص بالكامل.
خيارات التصفية المتقدمة والمستقلة باستخدام المتوسط المتحرك (MA) ومتوسط السعر المرجح بالحجم (VWAP) لإشارات ستوكاستيك S3-S5.
البنية البرمجية الشاملة التي تسمح لهذه المكونات المتنوعة بالعمل بشكل متآزر.
مبررات الدمج (Mashup Justification):
تم تصميم هذا المؤشر لتوفير رؤية متعددة الأبعاد للسوق، وهو أمر ضروري غالبًا لاتخاذ قرارات تداول قوية. من خلال الجمع بين:
تحليل MTF (لوحة المعلومات والإشارات): لفهم السياق الأوسع وتحديد الإشارات المتوافقة عبر وجهات نظر متعددة.
الزخم والاتجاه (ستوكاستيك، ماكد، RSI، المتوسط المتحرك): لقياس قوة واتجاه تحركات الأسعار.
تحليل الحجم (PVSRA): لتقييم قوة الاقتناع وراء حركة السعر.
تصفية الإشارات (MA/VWAP): لتعزيز موثوقية الإشارات المولدة.
هذا "الدمج" مبرر بفائدته في مساعدة المتداولين على تحديد إعدادات تداول ذات احتمالية أعلى من خلال التقاء هذه الإشارات التحليلية المتنوعة، كل ذلك ضمن أداة واحدة، مما يقلل من فوضى الرسم البياني ويبسط العملية التحليلية. الإسكريبت مفيد للمتداولين الذين يقدرون النهج التفصيلي متعدد الطبقات لتحليل السوق ويسعون لتأكيد الإشارات من وجهات نظر متعددة غير مترابطة.
الفائدة العملية للمتداولين:
تمكّن هذه الأداة المتداولين من:
تقييم ظروف السوق بسرعة عبر أطر زمنية متعددة ومؤشرات رئيسية.
تحديد إدخالات التداول المحتملة بناءً على إشارات ستوكاستيك الهرمية، المؤكدة بواسطة PVSRA وفلاتر MA/VWAP الاختيارية.
قياس قوة السوق والاقتناع بصريًا من خلال تلوين شموع PVSRA.
استخدام متوسط متحرك قابل للتخصيص لاتجاه الاتجاه والدعم والمقاومة الديناميكية.
اتخاذ قرارات أكثر استنارة من خلال النظر في التقاء العوامل التحليلية.
3. الميزات الرئيسية
لوحة معلومات متعددة الأطر الزمنية (ستوكاستيك، ماكد، RSI): تعرض قيم ستوكاستيك (K%, D%, الحالة)، الماكد (الخط، خط الإشارة، الحالة)، ومؤشر القوة النسبية (القيمة، المتوسط البسيط، الحالة) لما يصل إلى خمسة أطر زمنية قابلة للتخصيص (TF1 إلى TF5).
إشارات توافق ستوكاستيك الهرمية (S3, S4, S5): يتم إنشاء الإشارات بناءً على سلسلة من تأكيدات ستوكاستيك عبر الأطر TF1-TF5، مع عتبات مستوى K يحددها المستخدم للتقاطعات الأولية والتأكيدات اللاحقة.
تلوين شموع PVSRA: يدمج منطق PVSRA لتلوين الشموع بناءً على تحليل الحجم وحركة السعر (مثل شموع حجم صاعد/هابط 200%، حجم 150%، حجم عادي). خيار لتجاوز الرمز الحالي لحساب PVSRA.
متوسط متحرك قابل للتخصيص (MA): يرسم متوسطًا متحركًا (SMA أو EMA) يمكن للمستخدم اختياره مع طول ومصدر ولون وعرض قابل للتكوين.
فلتران اختياريان مستقلان للإشارات (لإشارات S3-S5):
فلتر MA: قم اختياريًا بتصفية إشارات S3-S5 باستخدام متوسط متحرك منفصل قابل للتكوين (SMA, EMA, WMA).
فلتر VWAP: قم اختياريًا بتصفية إشارات S3-S5 باستخدام VWAP مع خيارات إرساء متقدمة.
تلوين خلفية قابل للتخصيص: يقوم اختياريًا بتلوين خلفية الرسم البياني عندما تكون مؤشرات ستوكاستيك على الأطر TF3، TF4، و TF5 جميعها في توافق صاعد أو هابط.
تخصيص واسع النطاق: قم بتكوين جميع الأطر الزمنية، وجميع معلمات المؤشرات (ستوكاستيك، ماكد، RSI، ألوان PVSRA، إعدادات MA، إعدادات VWAP)، ومستويات تأكيد K للإشارات، ومظهر الجدول، وشروط التنبيه.
التنبيهات: يُعرّف المؤشر العديد من شروط التنبيه لتوافق إشارات S3 و S4 و S5 الصاعدة/الهابطة، مع إشارة رسائل التنبيه إلى الفلاتر النشطة.
4. كيف يعمل المؤشر
بيانات MTF ولوحة المعلومات: يقوم الإسكريبت بجلب وحساب بيانات ستوكاستيك، الماكد، و RSI لكل من الأطر الزمنية الخمسة التي يحددها المستخدم باستخدام request.security مع barmerge.lookahead_on لمنع تسرب البيانات المستقبلية. تملأ هذه البيانات الجدول على الرسم البياني.
تلوين شموع PVSRA: يحلل حجم كل شمعة ونطاق سعرها مقابل المتوسطات التاريخية (مثل متوسط متحرك بسيط لـ10 فترات للحجم) لتحديد الشموع ذات الحجم المرتفع بشكل كبير (مثل >=150% أو >=200% من المتوسط) أو "value2" مرتفعة (الحجم * النطاق)، وتلوينها وفقًا لذلك للدلالة على ضغط شراء أو بيع قوي.
توليد إشارات ستوكاستيك (S3-S5):
يعمل تقاطع ستوكاستيك أولي على TF1 (يمكن تصفيته اختياريًا بمستوى K) كمُشغِّل.
يتم بعد ذلك تأكيد هذا التقاطع بالتتابع بواسطة شروط ستوكاستيك متوافقة (K فوق/تحت D، و K فوق/تحت مستويات التأكيد المحددة من المستخدم) على TF2، ثم TF3 (لإشارة S3)، ثم TF4 (لـ S4)، وأخيرًا TF5 (لـ S5).
تصفية الإشارات بـ MA و VWAP: في حالة التمكين، لا يتم رسم إشارات S3-S5 المولدة (ولا تُطلق تنبيهات) إلا إذا كان السعر يستوفي أيضًا الشرط المتعلق بالمتوسط المتحرك المختار (مثال: السعر > MA للشراء) و/أو VWAP. يمكن رسم خطوط MA و VWAP بشكل مستقل.
تلوين الخلفية: بناءً على إجماع حالات ستوكاستيك (صاعدة/هابطة) على الأطر TF3، TF4، و TF5.
5. كيفية الاستخدام
تكوين الأطر الزمنية والمؤشرات الأساسية: قم بإعداد مستويات MTF المطلوبة (TF1-TF5) ومعلمات ستوكاستيك، الماكد، و RSI عبر مربع حوار "الإعدادات/المدخلات" الخاص بالإسكريبت.
تكوين PVSRA و MA العام: قم بتمكين/تعطيل تلوين شموع PVSRA ورسم المتوسط المتحرك العام؛ اضبط معلمات كل منهما (الألوان، الأطوال، الأنواع).
ضبط معلمات إشارة ستوكاستيك:
عدّل عتبات مستوى K لتقاطعات ستوكاستيك TF1 (اضبط على 0 للصاعد/100 للهابط لتعطيل فلتر دخول مستوى K).
قم بتكوين عتبات تأكيد مستوى K لـ TF2-TF5.
تكوين فلاتر MA/VWAP الاختيارية للإشارات: قم بتمكين الرسم و/أو تصفية الإشارات بشكل مستقل لـ MA و/أو VWAP؛ اختر أنواعها وأطوالها وفترات الإرساء.
التفسير:
لوحة المعلومات: للحصول على نظرة عامة على ظروف السوق.
شموع PVSRA: لقياس قوة الاقتناع وراء تحركات الأسعار.
إشارات S3-S5: كمؤشرات محتملة لتوافق ستوكاستيك متعدد الأطر يزداد قوة. كلما زاد عدد الفلاتر التي تجتازها الإشارة (MA, VWAP)، كلما أمكن اعتبارها أكثر قوة.
خطوط MA/VWAP: كدعم/مقاومة ديناميكية أو مؤشرات اتجاه.
لون الخلفية: لتقييم بصري سريع لزخم ستوكاستيك الأوسع.
إعداد التنبيهات: أضف المؤشر إلى الرسم البياني. انقر فوق زر "تنبيه" في TradingView، واختر هذا المؤشر ضمن "الشرط"، ثم اختر من شروط التنبيه المحددة (مثل "Stoch TF3 Bullish Alignment"). ستشير رسائل التنبيه إلى الفلاتر النشطة.
6. اعتبارات هامة / إخلاء مسؤولية
يوفر هذا المؤشر أدوات تحليلية وإشارات محتملة؛ إنه ليس نظام تداول قائم بذاته ولا يضمن الأرباح.
استخدمه دائمًا بالاقتران مع استراتيجية التداول الخاصة بك، إدارة المخاطر، والتحليلات الأخرى. اختبره جيدًا.
تختلف فعالية الفلاتر والإشارات باختلاف ظروف السوق والأصول. التجربة مع الإعدادات أمر بالغ الأهمية.
هذا الإسكريبت مخصص للأغراض التعليمية/المعلوماتية فقط وليس نصيحة مالية. ينطوي التداول على مخاطر كبيرة. المؤلف، Saleh_ABO_RAED، غير مسؤول عن أي قرارات تداول بناءً على هذا المؤشر.
7. الحقوق والتقدير
منطق إشارات ستوكاستيك الهرمية (S3-S5) والإطار الاستراتيجي الأولي مستوحيان من عمل f56eroon (ابو بتال - خطيرون). هذا الإسكريبت، "MTF Dashboard (Stoch,MACD,RSI) & Stochastic Signals"، يمثل تطويراً أصيلاً قام به Saleh_ABO_RAED، ويتميز بالتنفيذ المحدد للوحة معلومات MTF لمؤشرات ستوكاستيك، الماكد، و RSI، ودمج تلوين شموع PVSRA والمتوسط المتحرك العام، والتصفية المتقدمة للإشارات باستخدام MA/VWAP، وتلوين الخلفية، والبنية البرمجية الشاملة القابلة للتخصيص.
