Şimdi başlat

"cm" için komut dosyalarını ara

WVF - OscillatorAnother attempt on making use of CM-Williams-Vix-Fix-Finds-Market-Bottoms from Chris Moody - which is arguably one of the best indicator available on pine and tradingview platform. Every time I revisit this, I get new ideas on applying this method. I have slightly altered formula to highest(source)-source/highest(source) from the original formula highest(close)-low/highest(close) Process is simple: Calculate WVF for OHLC values separately Calculate momentum on each of the WVF values based on distance from moving average Plot the candles based on OHLC momentum. Candle color depends on whether close, open and previous close. If close is higher than open and previous close, we get green coloured candles. If close is lower than previous close and open then we get red coloured candles. In all other cases, we will have silver candles. High/Low bands are calculated based on median of highest and lowest values of VixFix. We also plot median of close which can be used in some cases. How to use this to find market bottom. Look for one of the below conditions: First red candle above high band - which signals momentum of vix fix is about to fall. First red candle above median line - can be used only if upward momentum of wvf candles are trending well. Crossunder of wvf candles under high band. Possible exit scenarios Green WVF candle formed above WVF high line Entry is taken on first red candle above median line - but, candles turned green before WVF crossing under median line - may signal our thesis is wrong and price may drop further. Some examples.
Pine Script® göstergesi
Trendoscope tarafından
11
Aroon Histogram + CMO [ChuckBanger]This is a combination of Aroon and Chande Momentum Oscillator . I made a histogram of Aroon , aqua line is Chande Momentum and the orange line are a simple moving average of Chande Momentum as a signal line. One strategy you can use this for is to buy or sell when the signal line crosses the CM line or you can buy and sell when CM line is highest or lowest You should also study how the indicators work separately: Aroon Oscillator www.investopedia.com Chande Momentum Oscillator www.investopedia.com
Pine Script® göstergesi
ChuckBanger tarafından
6
PPSRMA -COMPILATION OF 2 GREAT SCRIPTS AND DOUBLE MAFirst of all I just did the compilation so this is not my idea, it is just a miscellany. This script has been compiled for authors who have just been introduced to scripts : for unloading and leaving room for other indicators especially:non-pro users needs space for indicators and users seeking best technical combination. This script says thousands of comments. It's the best combination I've ever try and see everything about future. All efforts belongs to ChrisMoody. ( And fernandofurtado for double moving average codes) --------------- INGREDIENTS ------------------ 1-) Price Action Bars - Price Patterns - CM_Price-Action-Bars-Price Patterns That Work! ( by ChrisMoody ) Original : 2-) Oldschool Projected High & Lows - CM_OldSchool_Projected_high_Low ( by ChrisMoody ) Original : 3-) Multiple Moving Averages - ( by fernandofurtado ) Original : ---------- SETTINGS- ----------- - Use dark theme - Select SMA fast : 25 SMA slow : 50 ( Inputs) - Tick all inputs and see price action bars ( Inputs) FOR FLOW TRADERS : ** Use 30 mins graphs with - Weekly Projected High & Lows *** Choose high liquidity stocks ( Bank stocks etc.) FOR MEDIUM - LONG TERM TRADERS AND INVESTORS ** Use 4 hour graphs with - Quarterly Projected High & Lows OR ** 1 day graphs with - Yearly Projected High &Lows ( OR Quarterly Projected High & Lows ) ------------------- SUGGESTIONS -------------------- * Add MACD (12,26) and RSI (14) in your empty slots. * Use mostly on stock markets. * Be careful about stocks under red breakout line are dangerous same as above green breakout levels. * Always consider with all indicators and patterns (especially price patterns), get confirmed from Volume. * Consider with financial analysis ( mostly for medium-long term ) NOTE : The authors' codes are specified on scripts source codes.
Pine Script® göstergesi
Noldo tarafından
Flux AI PullBack System (Hybrid Pro)Flux AI PullBack System (Hybrid Pro) //Session-Aware | Adaptive Confluence | Grace Confirm Logic// Overview: The Flux AI PullBack System (Hybrid Pro v5) is an adaptive, session-aware pullback indicator designed to identify high-probability continuation setups within trending markets. It automatically adjusts between “Classic” and “Enhanced” logic modes based on volatility, volume, and ATR slope, allowing it to perform seamlessly across different market sessions (Asian, London, and New York). Core Features: Hybrid Auto Mode — Dynamically switches between Classic (fast-moving) and Enhanced (strict) modes. Session-Aware Context — Optimized for intraday trading in ES, NQ, and SPY. Grace Confirmation Logic — Validates pullbacks with a follow-through condition to reduce noise. Adaptive EMA Zone (38/62) — Highlights pullback areas with dynamic aqua fill and transparency linked to trend strength. Noise Suppression Filter — Prevents false pullbacks during EMA crossovers or unstable transitions. Weighted Confluence Model — Combines trend, ATR, volume, and swing structure for confirmation strength. Pine v6 Compliant Alerts — Constant-string safe, ready for webhooks and automation. Visual Elements: Aqua EMA Zone: Displays the “breathing” pullback band (tightens during volatility spikes). PB↑ / PB↓ Markers: Confirmed pullbacks with subtle transparency and fixed label size. Bar Highlights: Yellow for pullbacks; ice-blue for confirmed continuation. Use Cases Perfect for: Intraday trend traders 0DTE SPX / ES scalpers Futures traders (NQ, MNQ, MES) Algorithmic strategy builders using webhooks Recommended Timeframes: 1–15 minute charts (scalping / intraday) Higher timeframes for swing confirmations. Attribution: This open-source script was inspired by Chris Moody’s “CM Slingshot System” and JustUncleL’s Pullback Tools, but it was built from scratch using AI-assisted code refinement (ChatGPT). All logic and enhancements are original, not derived from proprietary software. License: MIT (Open Source) © 2025 Ken Anderson — You may modify, use, or redistribute with credit. Keywords: Pullback, Reversal, AI Trading, EMA Zone, Session Aware, Futures Trading, SPX, ES, NQ, ATR Filter, Volume Confirmation, Flux System, Pine Script v6, Non-Repainting, Adaptive Trading Indicator.
Pine Script® göstergesi
inkadinka_ka tarafından
1
Volume Flow ConfluenceVolume Flow Confluence (CMF-KVO Integration) Core Function: The Volume Flow Confluence Indicator combines two volume-analysis methods: Chaikin Money Flow (CMF) and the Klinger Volume Oscillator (KVO). It displays a histogram only when both indicators align in their respective signals. Signal States: • Green Bars: CMF is positive (> 0) and KVO is above its signal line • Red Bars: CMF is negative (< 0) and KVO is below its signal line • No Bars: When indicators disagree Technical Components: Chaikin Money Flow (CMF): Measures the relationship between volume and price location within the trading range: • Calculates money flow volume using close position relative to high/low range • Aggregates and normalizes over specified period • Default period: 20 Klinger Volume Oscillator (KVO): Evaluates volume in relation to price movement: • Tracks trend changes using HLC3 • Applies volume force calculation • Uses two EMAs (34/55) with a signal line (13) Practical Applications: 1. Signal Identification - New colored bars after blank periods show new agreement between indicators - Color intensity differentiates new signals from continuations - Blank spaces indicate lack of agreement 2. Trend Analysis - Consecutive colored bars show continued indicator agreement - Transitions between colors or to blank spaces show changing conditions - Can be used alongside other technical analysis tools 3. Risk Considerations - Signals are not predictive of future price movement - Should be used as one of multiple analysis tools - Effectiveness may vary across different markets and timeframes Technical Specifications: Core Algorithm CMF = Σ(((C - L) - (H - C))/(H - L) × V)n / Σ(V)n KVO = EMA(VF, 34) - EMA(VF, 55) Where VF = V × |2(dm/cm) - 1| × sign(Δhlc3) Signal Line = EMA(KVO, 13) Signal Logic Long: CMF > 0 AND KVO > Signal Short: CMF < 0 AND KVO < Signal Neutral: All other conditions Parameters CMF Length = 20 KVO Fast = 34 KVO Slow = 55 KVO Signal = 13 Volume = Regular/Actual Volume Data Requirements Price Data: OHLC Volume Data: Required Minimum History: 55 bars Recommended Timeframe: ≥ 1H Credits: • Marc Chaikin - Original CMF development • Stephen Klinger - Original KVO development • Alex Orekhov (everget) - CMF script implementation • nj_guy72 - KVO script implementation
Pine Script® göstergesi
jpkxyz tarafından
[blackcat] L2 Votatility of Williams VixFix Risk AssessmentHey there! I previously wrote an article about the Larry Williams ViX Fix technical indicator. Soon after, friends from the TradingView community told me that this indicator could be combined with the Risk Assessment indicator I wrote about earlier to determine when to go long or short. At the time, I found it a bit cumbersome to use both indicators together, so I came up with a solution: to merge them. This way, we can use one technical indicator to visually see whether we should go long or short. Isn't that cool? The indicator has a very common name: ** L2 Votatility of Williams VixFix Risk Assessment, or VoWVRA for short.** This TradingView Pine Script is a custom indicator based on the Larry Williams ViX Fix technical indicator, designed to help traders with risk assessment and trading decisions. The Larry Williams ViX Fix indicator is derived from the volatility of the S&P 500 index and is mainly used to display changes in current market sentiment. The indicator determines market volatility by calculating the distance between the highest price, the lowest price, and the closing price. The higher the value of the indicator, the more tense the market sentiment, and the higher the market volatility; conversely, the lower the value, the more stable the market sentiment and the lower the market volatility. The VoWVRA indicator is based on the Larry Williams ViX Fix indicator, combined with technical indicators such as Bollinger Bands and EMA, to assess market risk. The indicator can be customized with input parameters to suit different markets and investor needs. Using the VoWVRA indicator can help traders make wiser choices in risk control and trading decisions. In addition, this TradingView Pine Script also includes a risk assessment indicator. The indicator calculates a series of values and then applies the exponential moving average (EMA) to the percentage change between the closing price and the highest and lowest prices within a certain range to determine the safety level. The safety level is then compared to different thresholds to determine the market's risk level. The risk assessment indicator can be customized with input parameters such as risk length, safety length, and EMA length to suit different market conditions and investor preferences. Using the risk assessment indicator can help traders make wiser decisions in risk management and trading strategies. By using the VoWVRA and risk assessment indicators, traders can more accurately assess market risk and make wiser choices in trading decisions.
Pine Script® göstergesi
blackcat1402 tarafından
3
CM_Williams_Vix_Fix - Market Top and Bottom with multi-timeframeThis is a modification of CM_Williams_Vix_Fix indicator to include both market tops and bottoms with multi-timeframe support. The original indicator only finds market bottoms. All credits go to the original author ChrisMoody. Original script link Working: The histogram above 0 signifies the trend of market going UP and the histogram below 0 signifies the trend of market going DOWN. The histogram bar is calculated using "LookBack Period Standard Deviation High" number of candles. A threshold is calculated using bollinger bands and based on percentile of "Look Back Period Percentile High" number of candles. If the histogram bar above 0 crosses the up threshold then we have market top which is signified by histogram bar having the color green. If the histogram bar below 0 crosses the down threshold then we have market bottom which is signified by histogram bar having the color red. The market tops and bottoms can also be calculated across multiple timeframes. Sample usage: Suppose the market is in an uptrend and the indicator displays red market bottom bar, this might be an indication that the market has reached the end of a pullback. We can use additional indicators like stochastic or rsi to get additional confluence. This indicator does not repaint but you need to wait for the candle to close.
Pine Script® göstergesi
aaron_stone tarafından
13
Current Market StrengthThe **CMS** allows people to understand the current market strength by looking at the last candles and creating an analysis alongside the RSI (Relative Strength Index). It works by looking at x amount of candles. Default 10. Then checks how high the current open candle is in comparison to the last candles. Checking through all those candles. Creating a placement. Once the placement has been found then this indicator will get the RSI / 10, and add that onto the placement. The end result will look similar to the RSI, just more volatile to detect more precise scalping points. Feel free to change the value of 'x' stated in above in the setting menu.
Pine Script® göstergesi
JaxonBest tarafından
Williams Vix Fix Bottoms and TopsThis indicator uses the very popular Williams Vix Fix for Bottoms by Chris Moody but not only does it search for bottoms, it can also be switch to work for tops for those who look to short the market. I've also added in a few options like flipping the indicator, color adjustments on the settings page, as well as cut a few of the options I feel did not need to be in which cluttered the screen when the settings were opened. In his later revisions of the Williams Vix Fix, CM took out the functions which draw the high/low ranges as well as the standard deviation which is what this indicator uses to show entry points. I have added options back on to draw these, I think it's useful. To be honest, I have not messed around with the number settings much so I am not sure how adjusting the look back range or going for smaller / bigger percentage changes would change how well the indicator works. It seems to work very well at its default settings. With the Bollinger Band deviation, you have to remember that it looks back at the set amount of candles (20 by default) and uses those for the standard deviation: 1 dev = 68%, 2 dev = 95%, 3 dev = 99.7% These percentages mean that at 2 dev, 95% of the last 20 candles will remain within the boundaries of the Bollinger Bands. Three tends to be too high, one is usually too low. Two is pretty good. The lowest percentile option probably won't change much other than bring up the bottom line which doesn't effect the alerts or signals, just something to observe. The highest percentile option makes a difference similar to the stand deviation and Bollinger Band. The higher you put it, the less likely it will get triggered but the more reliant it of a signal it should be. As always, I have left notes throughout the code and I did leave in the code that was original but commented it out as I don't believe it's worth having. I like to have the high/lows drawn, as well as the standard deviation. Then I find that the filtered entries are most accurate signals to follow. Simple entry is hit or miss, Aggressive entry is always early but sometimes that's not a great thing.
Pine Script® göstergesi
theehoganator tarafından
32
Crypto Volume/Strength ComparatorHello Traders, Here is an attempt to perform comparative analysis between top cryptos based on strength (oscillator) and volume. Methodology used here is similar to Magic Number formula described in the post : Enhanced Magic Formula for fundamental analysis . But, instead of using fundamentals, we are making use of few technicals to derive similar outcome. Usage of the available stats will not be same as Magic number since we are using technicals. ⬜ Process ▶ Get crypto exchange based on prefix of instrument being used. ▶ For the given exchange, get data for all the tickers available in input fields. ▶ Calculate Oscillator, Momentum based on price for each tickers. ▶ Calculate Oscillator, Momentum based on volume for each tickers. ▶ Calculate Volatility for each tickers. ▶ Rank Price-Oscillator, Price-Momentum, Volume-Oscillator, Volume-Momentum, Volatility for each tickers. ▶ Calculate combined rank by adding up individual ranks. ▶ Calculate movement of rankings from bar to bar ▶ Sort tickers based on rank and populate them on table. Display direction of rankings. ⬜ Components Display components are as follows: ⬜ Settings Settings are pretty simple and straightforward ⬜ Calculations ▶ Oscillators : High values of oscillators are considered as ideal as the process is intended towards finding trend. ▶ Momentum : Momentum is calculated on the basis of Squeeze Momentum Indicator by @LazyBear. ▶ Volatility : Volatility is calculated on the basis of Williams Vix Fix by @ChrisMoody. Here too since we are in trend following mode, lower vix fix is considered ideal. ⬜ Few Notes Tickers will show data only if selected exchange has them. Some tickers are not available in all exchanges. In that case, it will show NAN. This is kind of unavoidable as we need to have fixed size arrays for any calculations. Indicator works only on crypto tickers which has valid exchange. Tickers move through the rankings in real time. Background of all stats are based on gradient from green to red. Tickers on top may not always have better long opportunity or tickers at bottom may not always be optimal for shorting. We need to consider how long the instrument may stay in the position or how fast it is moving in opposite direction. Hence, directions of the ranking movement are also shown on the table.
Pine Script® göstergesi
Trendoscope tarafından
6
Williams Vix Fix + Inverse [Alorse]The VIX Fix measures how close the current market price is to the lowest price of the last X candles. When prices are in uptrends, the close is usually near the high. But prices close near the low in downtrends. It works because it’s based on how traders behave. The calculation fixes some of the problems with the VIX. This indicator is based on CM_Williams_Vix_Fix Finds Market Bottoms and its great difference is that it adds the inverse functionality, also showing the possible highest areas of the market.
Pine Script® göstergesi
alorse tarafından
3
Vix SpikeThis script calculates spikes Vix tops and bottoms. The Vix Market Bottom is calculated using CM_Williams_Vix_Fix Finds Market Bottoms (Chris Moody). The Vix Market Top is calculated as the inverse of CM Williams’ formula. The highest Vix Bottom and the highest Vix Top are averaged (over the Highest Vix Lookback period). Buys are signaled when the Vix Bottom line crosses below the Highest Vix Average. Sells are signaled when the Vix Top line crosses below Highest Vix Average. BINANCE:ETHUSDT 5 min BYBIT:XRPUSD 5 min
Pine Script® göstergesi
xxattaxx tarafından
13
Volatility GuppyBased on my previous script "Turtle N Normalized," this script plots the CM SuperGuppy on the value of N to identify changing trends in the volatility of any instrument. Turtle rules taken from an online PDF: "The Turtles used a concept that Richard Dennis and Bill Eckhardt called N to represent the underlying volatility of a particular market. N is simply the 20-day exponential moving average of the True Range, which is now more commonly known as the ATR. Conceptually, N represents the average range in price movement that a particular market makes in a single day, accounting for opening gaps. N was measured in the same points as the underlying contract. The Turtles built positions in pieces which we called Units. Units were sized so that 1 N represented 1% of the account equity. Thus, a unit for a given market or commodity can be calculated using the following formula: Unit = 1% of Account/(N x Dollars per Point)" To normalize the Unit formula, this script instead takes the value of (close/N). Dollars per point = 1 for stocks and crypto, but will change depending on the contract specifications for individual futures . "Since the Turtles used the Unit as the base measure for position size, and since those units were volatility risk adjusted, the Unit was a measure of both the risk of a position, and of the entire portfolio of positions." When the EMA's are green, volatility is decreasing. When the EMA's are red, volatility is increasing. When the EMA's are grey, the trend is changing.
Pine Script® göstergesi
MartinShkreIi tarafından
2
Day of week, Forex FixCalendar to work on instruments that trade a 24 hour day like crypto and forex, also does not display if you are above an intraday time. Main tweak was to end the trading day at 0000 (midnight) instead of 1700 (5pm) NYC time. This update is geared towards Forex traders, which is why I chose to highlight Wednesday in yellow since that is commonly thought of as a midweek reversal point. @airscape built a good calendar indicator based on the work of @ChrisMoody, this is really an update to their work and directed towards FX and Crypto airscape: ChrisMoody: Future development: Toggle for light and dark themes Adjustment/offset for DLST and local vs/ server time Additional color bands to denote Asian/London/NYC sessions? Text label for days instead of color option? Clean up the code and simplify
Pine Script® göstergesi
fauxlife tarafından
1
Trend WaveHello Traders! You know, I can sill remember the first time I started tinkering with Pinescript. As I had no prior programming experience, I learned by experimenting with other open-source scripts on TradingViews Marketplace. Tearing apart and combining interesting scripts to see what the output would be. @ChrisMoody was a huge source of inspiration for learning, and I wanted to thank him, as well as @TheLark for the concept behind this script. The Trend Wave is based on @ChrisMoody's PPO-PercentileRank-Mkt-Tops-Bottoms , which also happens to be based on @TheLark's TheLark-Laguerre-PPO/ . Within my experimentation, I found that if I isolate the ppoT & ppoB variables and plot them calculated from extremely small decimals, you can get an extremely fast reacting, mirroring trend detector. Within the script, you have the ability to plot the background colors based on trend to make it easier to see where crossovers occured, as well as a Mirror Input to view the mirrored version of the script. -@DayTradingOil
Pine Script® göstergesi
DrCatherineHalsey tarafından
20
Baseline-C [ID: AC-P]The "AC-P" version of jiehonglim's NNFX Baseline script is my personal customized version of the NNFX Baseline concept as part of the NNFX Algorithm stack/structure for 1D Trend Trading for Forex. Everget's JMA implementation is used for the baseline smoothing method, with optional ATR bands at 1.0x and 1.5x from the baseline. NNFX = No Nonsense Forex Baseline = Component of the NNFX Algorithm that consists of a single moving average Baseline ---> Meant to be used in conjunction with ATR/C1/C2/Vol Indicator/Exit Indicator as per NNFX Algorithm setup/structure. C1 is 1st Confirmation Indicator, C2 is 2nd Confirmation Indicator. JMA (Jurik Moving Average) is used for the baseline and slow baseline. A slow baseline option is included, but disabled by default. The faint orange/purple lines are 1.0x/1.5x ATR from the Baseline, and are what I use as potential TP/SL targets or to evaluate when to stay out of a trade (chop/missed entry/exit/other/ATR breach), depending on the trade setup (in conjunction with C1/C2/Vol Indicator/Exit Indicator) This script is heavily based upon jiehonglim's NNFX Baseline script for signaling, barcoloring, and ATR. SSL Channel option included but disabled by default (Erwinbeckers SSL component) POC (Point of Control) from Volume Profile is included/enabled by default for both the current timeframe and 12HR timeframe 03.freeman's InfoPanel Divergence Indicator was used a reference to replace the current/previous ATR information infopanel/info draw from jiehonglim's script. I'm not sure whether I like the previous way ATR info was displayed vs how I have it currently, but it's something that is completely optional: Specifically: I am tuning this baseline/indicator for 1D trading as part of the NNFX system, for Forex. DO NOT USE THIS INDICATOR WITHOUT PROPER TUNING/ADJUSTMENT for your timeframe and asset class. Note about lack of alerts: Alerts for baseline crosses (and other crosses) have been purposefully omitted for this version upon initial publication. While getting alerts for baseline crosses under certain conditions/filtered conditions that eliminate low-importance signals and crossover whipsaw would be great, it's something I'm still looking into. SPECIFICALLY: There are entry, exit, take profit, and continuation signal components in relation to the Baseline to the rest of the NNFX Algorithm stack (ATR/C1/C2/Vol Indicator/Exit Indicator), including but limited to the "1 candle rule" and the "7 candle rule" as per NNFX. Implementing alerts that are significant that also factor in these rules while reducing alert spam/false signals would be ideal, but it's also the HTF/Daily chart - visually, entry/exit/continuation signal alignment is easy to spot when trading 1D - alerts may be redundant/a pursuit in diminishing returns (for now). //------------------------------------------------------------------- // Acknowledgements/Reference: // jiehonglim, NNFX Baseline Script - Moving Averages // // Fractured, Many Moving Averages // // everget, Jurik Moving Average/JMA // // 03.freeman, InfoPanel Divergence Indicator // // Ggqmna Volume stops // // Libertus RSI Divs // // ChrisMoody, CM_Price-Action-Bars-Price Patterns That Work // // Erwinbeckers SSL Channel //
Pine Script® göstergesi
auroagwei tarafından
9
ANN MACD BTC v2.0 This script is the 2nd version of the BTC Deep Learning (ANN) system. Created with the following indicators and tools: RSI MACD MOM Bollinger Bands Guppy Exponential Moving Averages: (3,5,8,10,12,15,30,35,40,45,50,60) Note: I was inspired by the CM Guppy Ema script. Thank you very much to dear wroclai for his great help. He has been a big help in the deep learning series. That's why the licenses in this series are for both of us. I'm sharing these series and thats the first. Stay tuned and regards! Note : Alerts added.
Pine Script® göstergesi
Noldo tarafından
13
Storm Trading System This script is inspired by the following : Fractal Dow RSI Support and Resistance ; Moving Average Clouds ; Let's start. This command is based on a fun description of where we are. Technical analysis methods are likened to a storm. Clouds as moving average,risk factor as lightning, fractals were taken as green and red rain. In this system: 4 Exponential Moving Averages, ( EMA15, EMA30 , EMA45 , EMA60 ), interpretation of my own work, Dow Factor RSI, as Fractal Support and Resistance, interpretation of my own work , DVOG Risk Factor : with changeable background and bar color. Fractal support resistance level codes do not belong to me. So I'm not putting a license. But the other codes are my labor. Consider the risk factor not as a stop, but as a region of high attention. It is a warning before hard movements. And watch out for turbulence in the clouds :) The regions above and below the clouds are major trend zones, which may take a long time. Guide the fractals in these areas. It allows you to comment on this and tons of similar things. And you see where you are in the big trade from a different perspective. Repaint issue : Firstly our source is close . Repaint will only cause the following issue and solution: There may be a time difference between countries as the dow factor depends on the indexes. Do not use a low graph time frame in stocks.
Pine Script® göstergesi
Noldo tarafından