Şimdi başlat

Göstergeler ve stratejiler

BTC Bull/Bear marketThis indicator plots the 350-period Simple Moving Average (SMA) calculated on the Daily ("D") timeframe. he color of the SMA line is determined by the closing price of the 2-Week ("2W") timeframe. 1. It fetches the 350-day SMA value (`sma350_daily`). 2. It checks where the *last closed* 2-Week candle finished relative to this SMA line. 3. If the 2W candle closed *above* the 350 SMA, the line is colored GREEN. 4. If the 2W candle closed *below* the 350 SMA, the line is colored RED. This helps to visualize the long-term trend (350 SMA) confirmed by a higher (2W) timeframe bias, using non-repainting logic (`close `) for the color signal.
Pine Script® göstergesi
Chart_Flow tarafından
Range Trading StrategyOVERVIEW The Range Trading Strategy is a systematic trading approach that identifies price ranges from higher timeframe candles or trading sessions, tracks pivot points, and generates trading signals when range extremes are mitigated and confirmed by pivot levels. CORE CONCEPT The strategy is based on the principle that when a candle (or session) closes within the range of the previous candle (or session), that previous candle becomes a "range" with identifiable high and low extremes. When price breaks through these extremes, it creates trading opportunities that are confirmed by pivot levels. RANGE DETECTION MODES 1. HTF (Higher Timeframe) Mode: Automatically selects a higher timeframe based on the current chart timeframe Uses request.security() to fetch HTF candle data Range is created when an HTF candle closes within the previous HTF candle's range The previous HTF candle's high and low become the range extremes 2. Sessions Mode: - Divides the trading day into 4 sessions (UTC): * Session 1: 00:00 - 06:00 (6 hours) * Session 2: 06:00 - 12:00 (6 hours) * Session 3: 12:00 - 20:00 (8 hours) * Session 4: 20:00 - 00:00 (4 hours, spans midnight) - Tracks high, low, and close for each session - Range is created when a session closes within the previous session's range - The previous session's high and low become the range extremes PIVOT DETECTION Pivots are detected based on candle color changes (bullish/bearish transitions): 1. Pivot Low: Created when a bullish candle appears after a bearish candle Pivot low = minimum of the current candle's low and previous candle's low The pivot bar is the actual bar where the low was formed (current or previous bar) 2. Pivot High: Created when a bearish candle appears after a bullish candle Pivot high = maximum of the current candle's high and previous candle's high The pivot bar is the actual bar where the high was formed (current or previous bar) IMPORTANT: There is always only ONE active pivot high and ONE active pivot low at any given time. When a new pivot is created, it replaces the previous one. RANGE CREATION A range is created when: (HTF Mode) An HTF candle closes within the previous HTF candle's range AND a new HTF candle has just started (Sessions Mode) A session closes within the previous session's range AND a new session has just started Or Range Can Be Created when the Extreme of Another Range Gets Mitigated and We Have a Pivot low Just Above the Range Low or Pivot High just Below the Range High Range Properties: rangeHigh: The high extreme of the range rangeLow: The low extreme of the range highStartTime: The timestamp when the range high was actually formed (found by looping backwards through bars) lowStartTime: The timestamp when the range low was actually formed (found by looping backwards through bars) highMitigated / lowMitigated: Flags tracking whether each extreme has been broken isSpecial: Flag indicating if this is a "special range" (see Special Ranges section) RANGE MITIGATION A range extreme is considered "mitigated" when price interacts with it: High is mitigated when: high >= rangeHigh (any interaction at or above the level) Low is mitigated when: low <= rangeLow (any interaction at or below the level) Mitigation can happen: At the moment of range creation (if price is already beyond the extreme) At any point after range creation when price touches the extreme SIGNAL GENERATION 1. Pending Signals: When a range extreme is mitigated, a pending signal is created: a) BEARISH Pending Signal: - Triggered when: rangeHigh is mitigated - Confirmation Level: Current pivotLow - Signal is confirmed when: close < pivotLow - Stop Loss: Current pivotHigh (at time of confirmation) - Entry: Short position Signal Confirmation b) BULLISH Pending Signal: - Triggered when: rangeLow is mitigated - Confirmation Level: Current pivotHigh - Signal is confirmed when: close > pivotHigh - Stop Loss: Current pivotLow (at time of confirmation) - Entry: Long position IMPORTANT: There is only ever ONE pending bearish signal and ONE pending bullish signal at any given time. When a new pending signal is created, it replaces the previous one of the same type. 2. Signal Confirmation: - Bearish: Confirmed when price closes below the pivot low (confirmation level) - Bullish: Confirmed when price closes above the pivot high (confirmation level) - Upon confirmation, a trade is entered immediately - The confirmation line is drawn from the pivot bar to the confirmation bar TRADE EXECUTION When a signal is confirmed: 1. Position Management: - Any existing position in the opposite direction is closed first - Then the new position is entered 2. Stop Loss: - Bearish (Short): Stop at pivotHigh - Bullish (Long): Stop at pivotLow 3. Take Profit: - Calculated using Risk:Reward Ratio (default 2:1) - Risk = Distance from entry to stop loss - Target = Entry ± (Risk × R:R Ratio) - Can be disabled with "Stop Loss Only" toggle 4. Trade Comments: - "Range Bear" for short trades - "Range Bull" for long trades SPECIAL RANGES Special ranges are created when: - A range high is mitigated AND the current pivotHigh is below the range high - A range low is mitigated AND the current pivotLow is above the range low In these cases: - The pivot value is stored in an array (storedPivotHighs or storedPivotLows) - A "special range" is created with only ONE extreme: * If pivotHigh < rangeHigh: Creates a range with rangeHigh = pivotLow, rangeLow = na * If pivotLow > rangeLow: Creates a range with rangeLow = pivotHigh, rangeHigh = na - Special ranges can generate signals just like normal ranges - If a special range is mitigated on the creation bar or the next bar, it is removed entirely without generating signals (prevents false signals) Special Ranges REVERSE ON STOP LOSS When enabled, if a stop loss is hit, the strategy automatically opens a trade in the opposite direction: 1. Long Stop Loss Hit: - Detects when: position_size > 0 AND position_size <= 0 AND low <= longStopLoss - Action: Opens a SHORT position - Stop Loss: Current pivotHigh - Trade Comment: "Reverse on Stop" 2. Short Stop Loss Hit: - Detects when: position_size < 0 AND position_size >= 0 AND high >= shortStopLoss - Action: Opens a LONG position - Stop Loss: Current pivotLow - Trade Comment: "Reverse on Stop" The reverse trade uses the same R:R ratio and respects the "Stop Loss Only" setting. VISUAL ELEMENTS 1. Range Lines: - Drawn from the time when the extreme was formed to the mitigation point (or current time if not mitigated) - High lines: Blue (or mitigated color if mitigated) - Low lines: Red (or mitigated color if mitigated) - Style: SOLID - Width: 1 2. Confirmation Lines: - Drawn when a signal is confirmed - Extends from the pivot bar to the confirmation bar - Bearish: Red, solid line - Bullish: Green, solid line - Width: 1 - Can be toggled on/off STRATEGY SETTINGS 1. Range Detection Mode: - HTF: Uses higher timeframe candles - Sessions: Uses trading session boundaries 2. Auto HTF: - Automatically selects HTF based on current chart timeframe - Can be disabled to use manual HTF selection 3. Risk:Reward Ratio: - Default: 2.0 (2:1) - Minimum: 0.5 - Step: 0.5 4. Stop Loss Only: - When enabled: Trades only have stop loss (no take profit) - Trades close on stop loss or when opposite signal confirms 5. Reverse on Stop Loss: - When enabled: Hitting a stop loss opens opposite trade with stop at opposing pivot 6. Max Ranges to Display: - Limits the number of ranges kept in memory - Oldest ranges are purged when limit is exceeded KEY FEATURES 1. Dynamic Pivot Tracking: - Pivots update on every candle color change - Always maintains one high and one low pivot 2. Range Lifecycle: - Ranges are created when price closes within previous range - Ranges are tracked until mitigated - Mitigation creates pending signals - Signals are confirmed by pivot levels 3. Signal Priority: - Only one pending signal of each type at a time - New signals replace old ones - Confirmation happens on close of bar 4. Position Management: - Closes opposite positions before entering new trades - Tracks stop loss levels for reverse functionality - Respects pyramiding = 1 (only one position per direction) 5. Time-Based Drawing: - Uses time coordinates instead of bar indices for line drawing - Prevents "too far from current bar" errors - Lines can extend to any historical point USAGE NOTES - Best suited for trending and ranging markets - Works on any timeframe, but HTF mode adapts automatically - Sessions mode is ideal for intraday trading - Pivot detection requires clear candle color changes - Range detection requires price to close within previous range - Signals are generated on bar close, not intra-bar The strategy combines range identification, pivot tracking, and signal confirmation to create a systematic approach to trading breakouts and reversals based on price structure, past performance does not in any way predict future performance
Pine Script® stratejisi
mindyourbuisness tarafından
2
Bitcoin Macro Oscillator (Cuga)Bitcoin Macro Oscillator (BMO) — WooCharts-Style Composite Indicator A single-number macro health check for Bitcoin, combining 4 key signals into one oscillator: ══════════════════════════════════════════════ HOW IT'S CALCULATED ══════════════════════════════════════════════ 1. MVRV Z-Score • Data: On-chain MVRV Ratio (INTOTHEBLOCK:BTC_MVRV) • Z = (MVRV - μ_4yr) / σ_4yr • Measures over/undervaluation vs. realized cost basis 2. VWAP Ratio Z-Score • VWAP = Cumulative (Price × Volume) / Cumulative Volume • Ratio = (Price / VWAP) - 1 • Z = (Ratio - μ_4yr) / σ_4yr • Tracks deviation from volume-weighted fair value 3. CVDD Ratio Z-Score (Approximated) • CVDD Proxy = 200-week SMA (long-term holder cost) • Ratio = (Price / CVDD) - 1 • Z = (Ratio - μ_4yr) / σ_4yr • Captures coin-age destruction & HODL cost basis 4. Sharpe Ratio Z-Score • 90-day rolling Sharpe = (Daily Return) / σ_daily • Z = (Sharpe - μ_4yr) / σ_4yr • Measures risk-adjusted momentum quality ══════════════════════════════════════════════ FINAL BMO FORMULA ══════════════════════════════════════════════ BMO = 0.25 × (Z_MVRV + Z_VWAP + Z_CVDD + Z_Sharpe) • Lookback: 1,460 days (~4 years) for mean & std dev • Equal weighting → BMO oscillates ~ –2.5 to +2.5 • Optional 1-period SMA smoothing ══════════════════════════════════════════════ SIGNAL LEVELS ══════════════════════════════════════════════ < –1.5 → Deep Oversold (Macro Buy) –1.5 to –0.8 → Oversold –0.8 to +0.8 → Neutral +0.8 to +1.5 → Overbought > +1.5 → Deep Overbought (Macro Sell)
Pine Script® göstergesi
paolocsgo tarafından
BullTrader - ParabolicSARFlipSignals(NonRepainting)TP/SL🧠 Purpose & Concept This indicator refines Wilder’s Parabolic SAR into a simple, non‑repainting alert and visualization system that marks each confirmed trend flip with a clear buy or sell signal. It also auto‑generates dynamic, ATR‑based Take‑Profit (TP) and Stop‑Loss (SL) levels, keeps them updating with price in real time, and displays the current market bias in an on‑chart table. The goal: clarity and automation without complexity — see exactly when a new bullish or bearish phase begins, what your current TP/SL targets are, and receive a single clean alert for every new flip. ⚙️ How It Works 1. The built‑in ta.sar() function tracks the Parabolic SAR dots. 2. When a candle closes across the SAR line, a trend‑change is confirmed:  • Price crossing above a SAR dot → Buy Flip (green triangle).  • Price crossing below a SAR dot → Sell Flip (red triangle). 3. On each flip, the indicator calculates dynamic ATR‑based TP / SL targets:  TP = entry ± (ATR × tpMult) and SL = entry ∓ (ATR × slMult)  These values move automatically as the trend develops. 4. A small floating label beside the latest bar shows live‑updated TP / SL numbers. 5. A color‑coded table in the upper‑right corner displays the current trend: Lime = Bullish, Red = Bearish, Yellow = Neutral. 6. Each new flip triggers an easy‑to‑use Buy / Sell alert after the bar closes—no repainting. 🔔 Alerts  Alert Name   Triggers When   Message   SAR Buy Flip Alert   Green triangle (bullish reversal)   “BUY Flip — Parabolic SAR on {{ticker}} ({{interval}})”   SAR Sell Flip Alert   Red triangle (bearish reversal)   “SELL Flip — Parabolic SAR on {{ticker}} ({{interval}})”  📈 Chart Elements  Element   Meaning   🟠 Orange cross   Standard Parabolic SAR trail.   🟢 / 🔴 Triangles   Confirmed buy / sell flips (non‑repainting).   Bright lime/red TP‑SL box   Live ATR targets that move with price.   Trend table (top‑right)   Instant status of bullish/bearish bias.  ✅ Features & Highlights Non‑repainting — all signals confirm on closed bars. Visual clarity — single pair of bright triangles for flips. Dynamic ATR‑based TP / SL values that auto‑trail with trend. Always‑visible trend summary table. Two ready‑made alert types (Buy / Sell). Lightweight and optimized for any timeframe or symbol. 💡 Best Use Ideal for traders who prefer clean trend‑based entries and volatility‑adaptive exits without signal clutter: Pair it with your existing strategy or use it standalone for reversal‑based swing and intraday trading.
Pine Script® göstergesi
BullTrader2023 tarafından
ADX Trend Strength Filter + TRAMA [DotGain]Summary Are you tired of trading trend signals, only to get stopped out in volatile, sideways chop? The ADX Trend Strength Filter (ADX TSF) is designed to solve this exact problem. It is a comprehensive trend-following system that only generates signals when a trend not only has the right direction and momentum, but also sufficient strength. This indicator filters out weak or indecisive market phases (the "chop") and will only color the bars Green or Red when all conditions for a strong, confirmed trend are met. ⚙️ Core Components and Logic The ADX TSF relies on a triple-filter logic to generate a clear trade signal: Trend Filter (TRAMA): A TRAMA (Trending Adaptive Moving Average) is used as the main trendline. This adaptive average automatically adjusts to market volatility, acting as a dynamic support/resistance level. Price > TRAMA = Bullish Price < TRAMA = Bearish Momentum Filter (RSI Crossover): Momentum is measured by a crossover of two moving averages of the RSI (a fast EMA and a slow SMA). This confirms whether the momentum is pointing in the same direction as the trend. Strength Filter (ADX): This is the most important filter. A signal is only considered valid if the ADX (Average Directional Index) is above a defined threshold (Default: 30). This ensures the trend has sufficient strength. 🚦 How to Read the Indicator The indicator has three states, displayed directly as bar colors on your chart: 🟩 GREEN BARS (Strong Uptrend) All three conditions are met: Price is above the TRAMA. RSI momentum is bullish (Fast MA > Slow MA). ADX is above 30 (Strong trend is present). 🟥 RED BARS (Strong Downtrend) All three conditions are met: Price is below the TRAMA. RSI momentum is bearish (Fast MA < Slow MA). ADX is above 30 (Strong trend is present). 🟧 ORANGE BARS (Neutral / Caution) This state appears if any of the following conditions are true: Weak Trend: The ADX is below 30. The market is in consolidation or a sideways phase. (This is the primary filter!) Indecision: The price is caught in the "Neutral Zone" between the TRAMA and the 200 SMA. Visual Elements Bar Colors: (Green/Red/Orange) Show the current trend status. TRAMA (Orange Line): Your primary adaptive trendline. 200 SMA (White Line): Serves as a reference for the long-term trend. Orange Background (Fill): Fills the area between the TRAMA and SMA to visually highlight the "Neutral Zone." Key Benefit The goal of the ADX TSF is to keep traders out of weak, unpredictable markets and help them participate only in strong, momentum-confirmed trends. Have fun :) Disclaimer This "Buy The F*cking Dip" (BTFD) indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice. The signals generated by this tool (both "Buy" and "Sell") are the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. All trading and investing in financial markets involves substantial risk of loss. You can lose all of your invested capital. Past performance is not indicative of future results. The signals generated may produce false or losing trades. The creator (© DotGain) assumes no liability for any financial losses or damages you may incur as a result of using this indicator. You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR) and consider your personal risk tolerance before making any trades.
Pine Script® göstergesi
DotGain tarafından
1
BullTrader - ParabolicSARFlipSignals(NonRepainting)🧠 Concept & Purpose This indicator isolates the confirmed trend‑change events produced by the Parabolic SAR and turns them into direct, non‑repainting trade signals. Instead of plotting every SAR dot as a potential entry, it marks only the bars where price has closed across the SAR line, confirming a genuine flip from bullish → bearish or vice versa. Each confirmed flip is displayed with a single triangle on the chart and can be connected to alerts. The design is intentionally minimal: one simple but reliable algorithmic definition of “the trend just turned.” ⚙️ How It Works 1. The script calculates the standard Parabolic SAR value using the built‑in ta.sar() function. 2. When a candle closes above a SAR dot that was previously above price → uptrend starts (Buy Signal). 3. When a candle closes below a SAR dot that was previously below price → downtrend starts (Sell Signal). 4. Signals are confirmed only after the bar closes (barstate.isconfirmed), guaranteeing no repainting. 5. Each event can trigger an alert or simply serve as a visual reversal marker. 📈 Chart Elements Element Description  🟠 Orange cross dots   Standard Parabolic SAR trail.  🟢 Triangle below bar   Confirmed SAR flip up → new bullish phase.  🔴 Triangle above bar   Confirmed SAR flip down → new bearish phase.  Optional green/red background   Highlights bars where a confirmed flip occurred.  🔔 Alerts Use buySignalFinal for Buy alerts and sellSignalFinal for Sell alerts. Set alerts to “Once per bar close” to match the non‑repainting confirmation logic. 📊 Best Use * Identifying clear trend reversals. * As an entry / exit overlay for manual trading. * As a base signal for automated or alert‑driven systems. This version keeps the indicator fast, reproducible, and completely non‑repainting — ideal for traders who prefer transparent and verifiable signals derived directly from Per J. Wilder’s original Parabolic SAR formula.
Pine Script® göstergesi
BullTrader2023 tarafından
Dance With Wolves VN PublicDance With Wolves VN Indicator kết hợp EMA 9/21 để vào lệnh nhanh, thêm EMA 20/50/200 để xem trend lớn. Tự tạo Entry, SL, TP1, TP2, TP3 theo ATR. Vẽ luôn 3 mức kháng cự (R1–R3) và 3 mức hỗ trợ (S1–S3) từ pivot gần nhất. Dùng tốt cho khung 1m–15m với crypto, stock, futures. Dance With Wolves VN — Smart EMA Strategy This indicator combines EMA 20/50/200 trend tracking, automatic Buy/Sell signals, Take Profit & Stop Loss levels, and Support/Resistance zones. It helps traders identify clean entries, manage risk with visual TP/SL targets, and follow market trends with clarity. Created by Dance With Wolves VN — a community project for traders who value discipline, teamwork, and precision.
Pine Script® göstergesi
tungtran2006 tarafından
1
Anchored ATH Drawdown LevelsThe Anchored ATH Drawdown Levels plots horizontal lines from a chosen anchor price (ATH), showing potential pullback zones at set percentage drops below it. This indicator's use lies in its anchored ATH framework, which rapidly visualizes precise drawdown levels as dynamic levels of interest or price targets enabling traders to anticipate pullback depths and potential reversal levels without manual calculations. Pick "True ATH" for the all-time high or "Period ATH" for anchored highs reset weekly, monthly, or quarterly. Lines stretch right for a cleaner visual. Key Features Anchoring: True ATH (lifetime max) or Period ATH (resets on 1W/1M/3M intervals). Drawdown Levels: 8 adjustable levels (defaults: -5%, -10%, -15%, -20% on; -25% to -50% off). Toggle each, set drop % (0.1-99.9), pick color, style (solid/dashed/dotted), width (1-3). ATH Line: Optional ATH line with custom color, style, width. Unified Look: Global overrides for all levels' color, style, width. Labels: Show % drops (with/without prices) via text boxes or full tags; sizes from tiny to large. Projection: Lines extend 5-100 bars right (default 20). Settings Anchor: Mode and timeframe. Display: Toggle levels/ATH, set extension. Labels: Style (text/full/none), size, price display. Global/ATH/Levels: Colors, styles, widths (per-level or shared). How to Use Load on chart (overlays prices; handles up to 500 lines). Choose anchor for your high. Tune levels for key pullbacks (e.g., -5% minor, -20% major). Customize visuals where the lines update on new peaks.
Pine Script® göstergesi
bhx10 tarafından
RSI + MACD Multi-Timeframe StrategyThis strategy combines the Relative Strength Index (RSI) from the daily timeframe with the Moving Average Convergence Divergence (MACD) from the 4-hour timeframe to generate precise long entry and exit signals. The system uses a multi-timeframe approach to align longer-term trend conditions with shorter-term momentum shifts — allowing traders to catch dips with confirmation and exit before reversals. 🧠 Strategy Logic ✅ Long Entry Condition: - RSI on the daily (1D) timeframe is oversold (below your defined threshold) - MACD on the 4H timeframe crosses above the signal line → A long trade is opened when these two align ✅ Long Exit Condition: - RSI on the daily timeframe is overbought - MACD on the 4H timeframe crosses below the signal line → The long trade is closed when these two conditions are met 💡 This strategy currently supports long entries only. Short logic can be added if needed. 📊 Indicator Components 🔹 RSI (Relative Strength Index): - A momentum oscillator that measures the speed and magnitude of price changes. - Helps identify overbought (potential sell) and oversold (potential buy) conditions. - Applied on the 1D timeframe (by default) to reflect broader market trend or exhaustion levels. 🔹 MACD (Moving Average Convergence Divergence): - A trend-following momentum indicator based on moving averages. - The MACD Line (fast EMA - slow EMA) crossing above the Signal Line indicates bullish momentum. - Used here on the 4-hour timeframe (by default) for shorter-term momentum confirmation. 🔹 Multi-Timeframe (MTF) Logic: - Uses request.security() to pull higher timeframe data (1D for RSI, 4H for MACD). - Ensures no repainting, as it only uses closed candles from the higher timeframe. - Aligns longer-term signals with shorter-term entries, reducing false signals. 📈 Plotting Options The script includes a plot selector input allowing you to toggle between: - RSI Plot (with overbought/oversold lines) - MACD Plot (MACD line and signal line) - This helps visualize signal conditions clearly on your chart. 🛠 Customization - RSI & MACD settings are fully configurable - RSI and MACD timeframes can be adjusted independently ⚠️ Disclaimer This strategy is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any asset. Past performance does not guarantee future results. Always test strategies in a simulated environment before live use, and consult with a licensed financial advisor for investment decisions.
Pine Script® stratejisi
RWCS_LTD tarafından
2
SR-ZnV2There are many support and resistance scripts out there. I was unable to find one that met all of my needs so I have expanded on the closest ones that I was able to discover. The ability to show persistent S/R levels by volume at various time frames automates much of the process for the user with unique and customizable features, the lastest dated of which are displayed by its time frame support/resistance strength and extend toward the right of the screen where they can be seen more clearly by price . // Original script is thanks to tommyf1001, synapticex and additional modifications is thanks to Lij_MC. Credit to both of them for most of the logic behind this script. Since then I have made many changes to this script as noted below. // Changed default S/R lines from plots to lines, and gave option to user to change between solid line, dashed line, or dotted line for both S/R lines. // Added additional time frame and gave more TF options for TF1 other than current TF. Now you will have 4 time frames to plot S/R zones from. // Gave user option to easily change line thickness for all S/R lines. // Made it easier to change colors of S/R lines and zones by consolidating the options under settings (rather than under style). // Added extensions to active SR Zones to extend all the way right. // Added option to extend or not extend the previous S/R zones up to next S/R zone. // Added optional time frame labels to active S/R zones, with left and right options as well as option to adjust how far to the right label is set. // Fixed issue where the higher time frame S/R zone was not properly starting from the high/low of fractal. Now any higher time frame S/R will begin exactly at the High/Low points. // Added to script a function that will prevent S/R zones from lower time frames displaying while on a higher time frame. This helps clean up the chart quite a bit. // Created arrays for each time frame's lines and labels so that the number of S/R zones can be controlled for each time frame and limit memory consumption. // New alert options added and customized alert messages.
Pine Script® göstergesi
cjohnsonfl5 tarafından
BUY/SELL/R/BBuy/Sell/R/B by SeanKidd Purpose: A clean, anchored signal system combining StochRSI crossovers, CVI top/bottom detection, and a MACD direction line that moves with price. ⚙️ How It Works BUY / SELL – Generated from a higher-timeframe StochRSI crossover. BUY (Green) → %K crosses above %D SELL (Red) → %K crosses below %D R (Reverse) – Yellow “R” appears above the candle when the CVI model detects a local top or exhaustion point. B (Bottom) – Blue “B” appears below the candle when CVI detects a local bottom. MACD Direction Line – Green = MACD above Signal → bullish momentum Red = MACD below Signal → bearish momentum The line rides just above the candles, offset by ATR so it always tracks price. 🧭 How to Use It Add the indicator: Search for Buy/Sell/R/B by SeanKidd under Community Scripts. Click ★ to favorite it. Apply it to your chart. Open ⚙️ Settings → Inputs Calculation Timeframe (StochRSI) → pick how fast or slow you want signals (default Weekly). MACD Line Offset (ATR ×) → raise or lower the MACD line if it overlaps candles. Adjust Top/Bottom thresholds to control how often R/B appear. Toggle Highlight bars or Color candles for visual clarity. Go to Settings → Scales and ensure it’s set to ✅ “Scale with Price Chart” or ✅ same scale side as the candles. This keeps everything perfectly attached to the chart. Optional: Add alerts Create → Alert → Condition → Buy/Sell/R/B by SeanKidd Choose: SRSI BUY, SRSI SELL, Top (R), or Bottom (B). 📈 Reading the Chart Marker Meaning Color Position BUY StochRSI %K cross above %D Lime Below bar SELL StochRSI %K cross below %D Red Above bar R CVI-detected top / reversal Yellow Above bar B CVI-detected bottom Blue Below bar Line MACD momentum direction Green/Red Above highs 💡 Tips Works on any symbol or timeframe. Slower charts (Daily–Weekly) give cleaner swing signals. Faster charts (15m–1h) show short-term reversals. Combine the MACD line direction with BUY/SELL for stronger confirmation.
Pine Script® göstergesi
Seankidd tarafından
Fisher MPzFisher MPz - Multi-Period Z-Score Fisher Transform Overview An enhanced Fisher Transform that uses multi-period analysis and improved statistical methods to provide more reliable trading signals with the goal of fewer false positives. Evolution Beyond Traditional Fisher Transform While the classic Fisher Transform uses simple price normalization and basic smoothing, Fisher MPz introduces several key enhancements: - Multi-period composite instead of single timeframe analysis - Robust z-score normalization using median/MAD rather than mean/standard deviation - Winsorization to handle outliers and price spikes - Dynamic clipping that adapts to market volatility - Kalman filtering for superior noise reduction vs. traditional EMA smoothing These improvements result in cleaner signals, better adaptability to different market conditions, handles trending markets without over-saturation at extreme values, and reduced false signals compared to the standard Fisher Transform. Key Features Multi-Period Analysis - Three Timeframe Approach: Simultaneously analyzes short (default 8), medium (default 13), and long (default 26) periods - Weighted Composite: Combines all three periods using customizable weights for optimal signal generation - Individual Period Display: Optional visualization of each period's Fisher Transform for deeper analysis Advanced Statistical Methods Robust Z-Score Calculation - Uses median and MAD (Median Absolute Deviation) instead of mean and standard deviation - More resistant to outliers and extreme price movements - Provides stable normalization across varying market conditions Winsorization - Caps extreme price values at specified percentiles (default 5th and 95th) - Reduces the impact of price spikes and anomalies - Configurable lookback period for threshold calculation Dynamic Z-Score Clipping - Automatically adjusts clipping levels based on recent volatility - Tighter bounds in calm markets (0.05) for precision - Wider bounds in volatile markets (0.2) to capture significant moves - Uses ATR-based volatility measurement Kalman Filter Smoothing - Optional advanced noise reduction using Kalman filtering - Superior to traditional EMA smoothing for optimal signal extraction - Configurable process noise (Q) and measurement noise (R) parameters - Fallback to traditional smoothing factor available How to Use Basic Interpretation - Above Zero: Bullish momentum - Below Zero: Bearish momentum - Extreme Values: Potential overbought/oversold conditions - Crossovers: Entry/exit signals when composite crosses trigger line Customizable Settings Periods: Adjust based on your trading timeframe - Lower values (3-10): More sensitive, suitable for scalping - Medium values (10-20): Balanced for swing trading - Higher values (20-50): Smoother for position trading Weights: Customize responsiveness - Increase short weight: More reactive to recent price changes - Increase long weight: More stability and trend confirmation Kalman Settings - Lower Q (0.001-0.02): Smoother, more filtered signals - Higher Q (0.02-0.1): More responsive to price changes - Lower R (0.01-0.05): Trust data more, less filtering - Higher R (0.1-1.0): More skeptical of data, more smoothing
Pine Script® göstergesi
B3AR_Trades tarafından
ATR Daniel# ATR Daniel - Indicator Description ## 🇬🇧 ENGLISH VERSION ### ATR Daniel - Smart Trailing Stop Manager **ATR Daniel** is an intelligent trailing stop indicator that automatically adapts to your trading style and the asset you're trading. #### Key Features: **🎯 3 Trading Modes:** - **Swing Trading** - For position trading with wider stops - **Intraday** - For day trading with balanced parameters - **Scalping** - For quick trades with tight stops **📊 Automatic Asset Detection:** The indicator automatically recognizes 3 major assets and applies optimized parameters: - **XAUUSD (Gold)** - Lower volatility settings - **BTCUSDT (Bitcoin)** - Medium volatility settings - **NAS100USD (Nasdaq 100)** - Higher volatility settings **🔧 Flexible Configuration:** - **Auto Mode**: Applies optimal parameters based on detected asset and selected trading mode - **Manual Mode**: Customize ATR length and multiplier to your preferences - **Customizable Colors**: Choose your own line color - **ON/OFF Display**: Toggle line visibility as needed **📈 Visual Display:** - Dynamic trailing stop line that follows price action - Color changes based on trend direction (bullish/bearish) - Real-time info table showing: - Current asset - Trading mode - ATR value - Stop loss distance - Recommended SL price - Current trend direction - Signal arrows at trend reversals (optional) **💡 How It Works:** The indicator uses ATR (Average True Range) to calculate dynamic stop loss levels that adapt to market volatility. The trailing stop follows the price in trending markets while protecting your position. **Perfect for:** - Traders who want automated stop loss management - Multi-asset traders (Gold, Bitcoin, Nasdaq) - All trading styles (Swing, Intraday, Scalping) ---
Pine Script® göstergesi
Daniel_Conroy tarafından