Şimdi başlat

Hareketli Ortalamalar

MTF VFSMA SqueezeThe purpose of this indicator is to detect a market squeeze (lack of volatility) period and to identify the initiation and direction of the breakout. It is based on Variety-Filtered, Squeeze Moving Averages indicator. The original indicator created by Loxx identifies both squeeze zones and breakouts/breakdowns. A squeeze zone is defined when price is below a specific volatility threshold calculated as the difference between a fast- and slow-moving average and filtered using ATR- or Pips-based threshold. It operates on a single timeframe and includes Loxx's Expanded Source Types, signals, alerts, etc. and 35+ Loxx's Moving Averages. These adaptive, minimal-lag indicators are built upon advanced mathematical and signal processing DSP techniques that far surpass traditional Moving Averages. This currently published indicator includes the following main developments: Squeeze Detection using Percentile Rank Method It detects the Squeeze by applying a Percentile Rank to the historical distance (spread) between the two MAs. MA Spread: The basis for Squeeze detection is the distance between the two moving averages. Percentile Rank: A statistical measure that indicates the percentage of past Spread values within the set lookback period that are lower than the current MA Spread. Squeeze State: A Squeeze occurs when the Percentile Rank is below the set Squeeze Threshold (%)). Example: If the threshold is 20% and the Rank is 15%, it means the MA Spread is in its tightest 15% range, below the set threshold. Therefore, the condition is currently met. Goal: Objective volatility measurement that adapts to market conditions. Squeeze Duration Filter A key condition for a Breakout signal is that the MAs must have remained in the Squeeze zone for a specified minimum duration. Goal: To filter out market noise and False Breakouts. Multi-Timeframe (MTF) Confluence Multi-Timeframe trend and squeeze monitoring for 3 timeframes (TFs). Provides confirmation using the MA status from two higher timeframes (TF2, TF3). Goal: Trend and momentum confirmation from a broader market context. Signals Only on Bar Close? By selecting the signalOnClose parameter to enabled, it is possible to avoid repainting on the chart TF. If it is checked, all events on the chart (L/S signals, Squeeze Start/End, MA color change) will only appear after the bar has closed, preventing repainting. Higher TF events remain in real-time. Goal: To increase the reliability of signals. Multi-Level Alerts and Info Panel Comprehensive, confluence-weighted alerts and real-time status display. Enhanced Alerts based on multi-timeframe confluences. Alerts are ready to enable/disable for Any alert() function call and ready for watchlists. Alert Frequency is also configurable in Inputs window. „Once per bar close” is the most reliable for signals. „Always” or „Once per bar” alert frequencies may generate temporary signal alerts. Please note that even if "Once per bar close" is selected as alert frequency, this only applies to the chart TF, and TF2 and TF3 status may be modified until the close of the relevant candle. Goal: Transparent decision-making. Other Improvements Unlike the original indicator, the coloring of the MA curves on the chart depends on the relative positions of the fast MA and slow MA. The curves are colored bullish when the fast MA is above the slow MA, bearish when the opposite is true, and neutral in the squeeze zone. Data Window with Squeeze Start/End, Buy/Sell, Status, Squeeze Percentile etc. on all 3 TFs. Ready for Pine Screener. Please be aware that currently only the chart TF is configurable in Pine Screener, TF2 and TF3 are set to their default values. Pine Script® version 6. Limitations When setting the indicator parameters, please take into account the limitations of TradingView. (Lookback period of Percentile Rank and Moving Averages periods, Execution time limit (timeout) etc.) For example, if a NaN% message appears as the Percentile Rank value, please reduce the lookback period. How to use it This indicator is a Breakout-following system, but it can also be the basis for Range Trading. The Setup Phase This is the preparation stage. The indicator signals low volatility as the bands tighten. Squeeze Dynamics: Monitoring the Squeeze Duration is essential. The longer the price spends in the Squeeze zone, the more likely the resulting breakout will be powerful. The Signal Phase (Breakout) The Breakout signal appears on the bar where the Percentile Rank first crosses above the Squeeze threshold, indicating a sudden return of volatility. Further condition: Meets the SqueezeDuration filter. Breakout direction: Bullish: Fast MA > SLow MA, Bearish: Fast MA < SLow MA Applying MTF Confluence: The most promising trades that are in line with higher timeframes: Total Confluence: Chart TF Signal + TF2 Bullish/Bearish + TF3 Bullish/Bearish. This is the strongest, highest-probability setup. Simple signal: Only the Chart TF signals. This should be handled with caution, as the higher timeframes (TF2, TF3) might still be in a Squeeze or in a conflicting state. Alternative Use: Range Trading within the Squeeze Bands If the market has low volume, the squeeze bands can be used as dynamic support/resistance for bounces off the edges of the range: The probability of a successful range trade increases if the boundaries of the squeeze zone have only been touched a few times previously. Each touch weakens the zone boundaries and increases the chance of a Breakout. Suggested Tactics and Risk Management When using Breakout strategies, strict risk management and the use of confirmations are essential: Volume Confirmation: A strong, above-average volume Breakout candle increases the probability of a successful breakout. False Breakout: If the breakout occurs on low volume, there is a higher chance of a pullback and a False Breakout. Entry After Retest: A safer entry: wait until the price breaks out, but only enter if it returns to the squeeze zone and bounces back from there. This reduces the risk of a False Breakout trap. The Risk of False Breakout: False Breakouts are part of any Breakout strategy. Always have a strict Stop Loss set. Reversal: Be prepared for the possibility that after a Breakout signal (e.g., Long), the price returns to the zone and then breaks out in the opposite (Short) direction. Please note that all technical analysis and trading signals only indicate probabilities. Always use your own risk management rules and follow market regulations. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss and is not suitable for every investor. Past performance shown in examples is not indicative of future results. The indicator provides signals and calculations, but trading decisions are solely your responsibility. Always: Test strategies on paper before using real money Never risk more than you can afford to lose Understand that all trading involves risk Consider seeking advice from a licensed financial advisor The publisher makes no guarantees regarding accuracy, profitability, or performance. Use at your own risk.
Pine Script® göstergesi
siisan tarafından
SA_EMA Combo + UT BotEMA Combo + UT Bot is an indicator designed to make it easier to track trend direction and momentum reversals on the same chart. The indicator combines multiple EMA lines (50/100/150/200) with a short- and medium-term EMA cloud. This cloud visually shows whether the market is in a bullish or bearish trend through color changes. In addition, it uses the UT Bot algorithm to generate buy and sell signals adapted to market volatility. These signals are triggered when the price crosses the ATR-based trailing stop level. Users can choose to use Heikin Ashi candles and adjust signal sensitivity via the Key Value parameter. This allows traders to follow overall trends and potential reversal zones using a single tool. Disclaimer: This indicator is for technical analysis purposes only and should not be considered financial advice. Developed for Future Alpha Club.
Pine Script® göstergesi
Selcukaktas06 tarafından
2
Relative Distance to Moving AverageThis indicator calculates the Relative Distance to a Moving Average (RDMA), a momentum oscillator that measures how overextended a price is from its moving average baseline. It expresses this distance as a percentage, oscillating around a zero line. High positive values may indicate overbought conditions, while large negative values may suggest oversold conditions. Key Features: Customizable MA Baseline: The oscillator's baseline is a moving average. Users can select from a wide range of MA types (e.g., EMA, SMA, WMA) and apply volume weighting (Volume weighted) for enhanced responsiveness. Normalization (Geometric Average): Includes an optional 'Normalize' mode. When enabled, the indicator uses a Geometric Moving Average (GMA) as its baseline and measures the percentage distance from this compound growth average, making it suitable for exponential markets. Full Divergence Suite (Class A, B, C): The indicator's primary feature is its integrated divergence engine. It automatically detects and plots all three major divergence classes between price and the RDMA: Regular (A): Signals potential trend exhaustion and reversals. Hidden (B): Signals potential trend continuations during pullbacks. Exaggerated (C): Signals weakness at double tops/bottoms. Divergence Filtering and Visualization: Price Tolerance Filter: Divergence detection is enhanced with a percentage-based price tolerance (pivPrcTol) to filter out insignificant market noise. Persistent Visualization: Divergence markers are plotted for the entire duration of the signal and are visually anchored to the RDMA level of the confirming pivot. Note on Confirmation (Lag): Divergence signals rely on a pivot confirmation method to ensure they do not repaint. The Start of a- divergence is only detected after the confirming pivot is fully formed (a delay based on Pivot Right Bars). The End of a divergence is detected either instantly (if the signal is invalidated by price action) or with a delay (when a new, non-divergent pivot is confirmed). Multi-Timeframe (MTF) Capability: MTF RDMA Line: The RDMA oscillator itself can be calculated on a higher timeframe, with standard options to handle gaps (Fill Gaps) and prevent repainting (Wait for...). Limitation: The Divergence detection engine (pivDiv) is disabled if a timeframe other than the chart's timeframe is selected. Divergences are only calculated on the active chart timeframe. Integrated Alerts: Includes 14 comprehensive alerts for: The start and end of all 6 divergence types. The RDMA oscillator crossing the zero line. DISCLAIMER For Informational/Educational Use Only: This indicator is provided for informational and educational purposes only. It does not constitute financial, investment, or trading advice, nor is it a recommendation to buy or sell any asset. Use at Your Own Risk: All trading decisions you make based on the information or signals generated by this indicator are made solely at your own risk. No Guarantee of Performance: Past performance is not an indicator of future results. The author makes no guarantee regarding the accuracy of the signals or future profitability. No Liability: The author shall not be held liable for any financial losses or damages incurred directly or indirectly from the use of this indicator. Signals Are Not Recommendations: The alerts and visual signals (e.g., crossovers) generated by this tool are not direct recommendations to buy or sell. They are technical observations for your own analysis and consideration.
Pine Script® göstergesi
AustrianTradingMachine tarafından
Versatile Moving AverageThe Versatile Moving Average (VMA) is a comprehensive, all-in-one tool for trend analysis. It is designed to act as a central hub for advanced MA calculations by combining a wide selection of average types, calculation modes, and a multi-timeframe engine. Key Features: Comprehensive MA Selection: Provides a wide variety of moving average types (e.g., EMA, SMA, WMA, HMA, and their volume-weighted counterparts). Allows full customization of length, source, and offset. Advanced Calculation Modes: Volume Weighting: Optionally weights the selected MA calculation by volume, making it more responsive to market participation. Normalization (Geometric Average): A key feature is the optional 'Normalize' mode. When enabled, the indicator calculates a Geometric Moving Average by averaging the logarithms of the source price. This measures the average compound growth rate, making it well-suited for analyzing assets with exponential price behavior. Multi-Timeframe (MTF) Engine: The indicator includes an MTF conversion block. When a Higher Timeframe (HTF) is selected, advanced options become available: Fill Gaps handles data gaps, and Wait for timeframe to close prevents repainting by ensuring the indicator only updates when the HTF bar closes. Integrated Alerts: Comes with built-in alerts for the source price crossing over or under the calculated VMA, allowing for timely notifications. DISCLAIMER For Informational/Educational Use Only: This indicator is provided for informational and educational purposes only. It does not constitute financial, investment, or trading advice, nor is it a recommendation to buy or sell any asset. Use at Your Own Risk: All trading decisions you make based on the information or signals generated by this indicator are made solely at your. No Guarantee of Performance: Past performance is not an indicator of future results. The author makes no guarantee regarding the accuracy of the signals or future profitability. No Liability: The author shall not be held liable for any financial losses or damages incurred directly or indirectly from the use of this indicator. Signals Are Not Recommendations: The alerts and visual signals (e.g., crossovers) generated by this tool are not direct recommendations to buy or sell. They are technical observations for your own analysis and consideration.
Pine Script® göstergesi
AustrianTradingMachine tarafından
MA Cloud + Linha Média🧠 Description of “MA Cloud + Average Line” Indicator This Pine Script indicator combines multiple moving averages (MAs) into a dynamic visualization that helps traders identify market trends, momentum shifts, and trend strength. It creates a colored cloud between the fastest and slowest moving averages, and also plots an average line representing the mean of all active MAs. ⚙️ 1. Core Features Multiple Moving Averages (MAs) Supports up to four customizable moving averages (MA1, MA2, MA3, MA4). Each MA can use different types: SMA (Simple Moving Average) EMA (Exponential Moving Average) WMA (Weighted Moving Average) VWMA (Volume-Weighted Moving Average) RMA (Smoothed Moving Average) Hull MA (Hull Moving Average) LSMA (Least Squares Moving Average) The trader can define each MA’s period, color, and choose whether it’s active or not. Trend Color Coding Each MA changes color based on its slope: Green (or chosen “Up Color”) when rising Red (or chosen “Down Color”) when falling This gives instant visual feedback on short-term direction. MA Cloud (Trend Zone) When the “Cloud” is active, the area between the minimum and maximum of all active MAs is shaded. The cloud changes color based on alignment: 🟩 Green Cloud – all MAs are aligned upward (strong bullish trend). 🟥 Red Cloud – all MAs are aligned downward (strong bearish trend). ⚪ Gray Cloud – mixed alignment (no clear trend / consolidation). Average Line (Mean of All MAs) Calculates the average of all active MAs and plots it as a central “mean” line. Serves as a dynamic trend guide — when price is above it, the market tends to be bullish; below it, bearish. The color of the line follows the current cloud color for consistency. 📈 2. How It Helps Identify Trends This indicator provides multiple layers of trend confirmation: Visual Element Interpretation Trend Insight MA Slope Color Green (Up) / Red (Down) Short-term momentum direction MA Cloud Color Green / Red / Gray Overall trend alignment across timeframes Average Line Mean of all MAs Acts as a “trend equilibrium” line Price vs. Average Line Above = Bullish / Below = Bearish Confirms trend bias 🔍 3. Example Use Cases Trend Following Enter long trades when all MAs are aligned (Cloud = Green) and price is above the average line. Enter short trades when the Cloud is Red and price is below the average line. Trend Strength Confirmation The wider the distance between MAs (thicker cloud), the stronger the ongoing trend. A narrowing cloud or color shift (green → gray → red) can warn of trend reversal or consolidation. Dynamic Support and Resistance The MA Cloud acts as a support zone in uptrends and resistance zone in downtrends. Traders can use the edges of the cloud to identify possible pullback entry zones. Multi-Timeframe Analysis By using fast MAs (e.g., 20/50) and slow MAs (100/200), traders can visualize short-term vs. long-term trend interaction, similar to “Golden Cross” and “Death Cross” setups. 🧩 4. How to Use It Practically Step 1: Enable only the MAs you need (e.g., 20, 50, 200). Step 2: Observe the cloud color: 🟩 Green → Favor long trades 🟥 Red → Favor short trades ⚪ Gray → Wait for confirmation Step 3: Use the average line as a filter: Trade only in the direction of the average line’s slope. Step 4: Combine with volume, RSI, or price action to refine entries. 💬 Summary Indicator Name: MA Cloud + Average Line Purpose: Visual trend detection and confirmation Best For: Swing and trend-following traders Signals Provided: Trend alignment (via color-coded cloud) Momentum shifts (via MA color changes) Dynamic support/resistance (via cloud zones) Overall trend bias (via average line)
Pine Script® göstergesi
ueuito tarafından
VWMA Series (Dynamic) mtf - Dual Gradient Colored"VWMA Series (Dynamic) mtf - Dual Gradient Colored" is a multi-timeframe (MTF) Volume-Weighted Moving Average (VWMA) ribbon indicator that plots up to 60 sequential VWMAs with arithmetic progression periods (e.g., 1, 4, 7, 10…). Each VWMA line is dual-gradient colored: Base hue = Greenish (#2dd204) if close > VWMA (bullish), Magenta (#ff00c8) if close < VWMA (bearish) Brightness gradient = fades from base → white as period increases (short → long-term) Uses daily resolution by default (timeframe="D"), making it ideal for higher-timeframe trend filtering on lower charts.Key FeaturesFeature Description Dynamic Periods Start + i × Increment → e.g., 1, 4, 7, 10… up to 60 terms Dual Coloring Bull/Bear + Gradient (short = vivid, long = pale) MTF Ready Plots daily VWMAs on any lower timeframe (1H, 15M, etc.) No Lag on Long Sets Predefined "best setups" eliminate repainting/lag Transparency Control Adjustable line opacity for clean visuals Scalable Up to 60 VWMAs (max iterations) Recommended Setups (No Lag)Type Example Sequence (Start, Inc, Iter) Long-Term Trend 1, 3, 30 → 1, 4, 7 … 88 93, 3, 30 → 93, 96 … 180 372, 6, 30 → 372, 378 … 546 Short-Term Momentum 1, 1, 30 → 1, 2, 3 … 30 94, 2, 30 → 94, 96 … 152 1272, 5, 30 → 1272, 1277 … 1417 Key Use CasesUse Case How to Use 1. Multi-Timeframe Trend Alignment On 1H chart, use 1, 3, 30 daily VWMAs → price above all green lines = strong uptrend 2. Dynamic Support/Resistance Cluster of long-term pale VWMAs = major S/R zone 3. Early Trend Change Detection Short-term vivid lines flip from red → green before longer ones = early bullish signal 4. Ribbon Compression/Expansion Tight bundle → consolidation; fanning out → trend acceleration 5. Mean Reversion Entries Price far from long-term VWMA cluster + short-term reversal = pullback trade 6. Volume-Weighted Fair Value Long-period VWMAs reflect true average price paid over weeks/months Visual Summary Price ↑ ████ ← Short VWMA (vivid green = close > VWMA) ███ ██ █ . . . fading to white █ ██ ███ ████ ← Long VWMA (pale = institutional average) Green lines = price above VWMA (bullish bias) Magenta lines = price below VWMA (bearish bias) Gradient = shorter (left) → brighter; longer (right) → whiter Ribbon thickness = trend strength (wide = strong, narrow = weak) Best For Swing traders using daily trend on intraday charts Volume-based strategies (VWMA > SMA) Clean, colorful trend visualization without clutter Institutional fair value anchoring via long-period VWMAs Pro Tip: Use Start=1, Increment=3, Iterations=30 on a 4H chart with timeframe="D" → perfect daily trend filter with zero lag and beautiful gradient flow.
Pine Script® göstergesi
surfchaser tarafından
Murrey Math SMA up to 32s Murrey Math SMA up to 32s is a highly advanced Pine Script v5 indicator that combines Murrey Math Lines (MML) with a customizable moving average (MA) — including a non-repainting Rolling VWAP (RVWAP) — and dynamic color-coded support/resistance bands up to 1/32 subdivisions. It projects octave-based geometric price levels (like Gann) centered on your chosen MA, with adaptive scaling, angle-based trend coloring, and absolute/extended MML bands. Includes 1/8, 1/16, and 1/32 grid lines, shaded zones, labels, and a live increment display.Core FeaturesFeature Description MA Types SMA, VWMA, VWAP, Period VWAP, RVWAP (rolling VWAP over fixed or adaptive time window) Murrey Math Grid Auto-scaled 0/8 to 8/8 + extensions (±3/8), with 1/16 & 1/32 subdivisions Dynamic Coloring Bands colored by MA slope angle (bullish/bearish) or absolute MML shift RVWAP Engine Non-repainting volume-weighted average over user-defined or adaptive time steps Wick Filtering Optional ignore wicks for cleaner MML framing Resolution Support Works with higher timeframe data via request.security() Key Use Cases Use Case How to Use 1. Precision Support & Resistance Treat 4/8 (mid) as pivot, 0/8 & 8/8 as extremes. Price often reverses or accelerates at these levels. 2. Mean Reversion Trades Buy near 0/8–1/8 (oversold), sell near 7/8–8/8 (overbought) when MA is flat or sloping mildly. 3. Trend Continuation When MA angle > threshold and price breaks 5/8, expect move to 8/8. Confirm with volume. 4. Breakout Entries Watch for close beyond 8/8 or 0/8 + MA angle steep → strong momentum breakout. 5. Scalping with 1/32 Grid Use 1/32 lines as micro-targets in ranging markets or after news spikes. 6. Volume-Weighted Fair Value RVWAP = true average price paid over time → anchor for institutional fair value. Visual Layout (MA-Centered) +3/8 ───┐ +2/8 ───┤ ← Strong resistance +1/8 ───┤ 8/8 ███┤ ← Overbought (red zone) 7/8 ───┤ 6/8 ███┤ 5/8 ───┤ 4/8 ███┤ ← Midline (pivot) 3/8 ───┤ 2/8 ███┤ 1/8 ───┤ 0/8 ███┤ ← Oversold (green zone) -1/8 ───┤ -2/8 ───┤ -3/8 ───┘ Shaded: 0/8–1/8 (buy), 7/8–8/8 (sell), 3/8–5/8 (neutral/consolidation) MA Line: Orange (RVWAP) or hidden Labels: Bottom, 1/4, Mid, 3/4, Top (offset to the right) Table: Shows current Increment size Best For Swing & scalp traders on stocks, forex, crypto Volume-based strategies (RVWAP shines in high-volume moves) Gann/Murrey Math enthusiasts wanting automation + modern MA anchoring
Pine Script® göstergesi
surfchaser tarafından
VMMA Ribbon + Q1/Q3 Echo Rayssimulates a series of vwma lines in a wave. Basically puts them in an array and calculates highest lowest values among other things ... The VMMA Ribbon + Q1/Q3 Echo Rays is a Pine Script v5 indicator that combines a dynamic Volume-Weighted Moving Average (VWMA) ribbon with interactive support/resistance "echo rays" based on the ribbon’s inner quartiles (Q1 and Q3). The ribbon is built from multiple VWMAs of increasing lengths, forming a band with an upper edge, lower edge, midline, and Q1/Q3 lines (representing the 25th and 75th percentiles of the band). Edges are colored by slope (bullish = green, bearish = red) or use a default color. Echo rays extend horizontally from recent swing lows in Q1 and swing highs in Q3, acting as dynamic support/resistance levels that "echo" past extremes until broken or surpassed. Key Use CasesUse Case Description 1. Trend Strength & Direction Ribbon expansion = volatility; compression = consolidation. Slope-colored edges show momentum shifts early. 2. Dynamic Support & Resistance Q1/Q3 echo rays mark high-probability reversal zones. Price respecting rays = continuation; break = reversal. 3. Mean Reversion Entries Buy near Q1 ray in uptrend (oversold within band); sell near Q3 ray in downtrend. 4. Breakout Confirmation Price breaking upper/lower edge + Q3/Q1 ray termination confirms strong breakout. 5. Volume-Weighted Context Uses VWMA → more reactive to volume spikes than SMA → better for stocks/crypto with sudden volume surges.
Pine Script® göstergesi
surfchaser tarafından
Uptrick: Volume Weighted BandsIntroduction This indicator, Uptrick: Volume Weighted Bands, overlays dynamic, volume-informed trend channels directly on the chart. By fusing price and volume data through volume-weighted and exponential moving averages, the script forms a core trend line with adaptive bandwidth controlled by volatility. It is designed to help traders identify trend direction, breakout entries, and extended conditions that may warrant take-profits or pullback re-entries. Overview The Volume Weighted Bands system is built around a trend line calculated by averaging a Volume Weighted Moving Average (VWMA) and an Exponential Moving Average (EMA), both over a configurable lookback period. This hybrid trend baseline is then smoothed further and expanded into dynamic upper and lower bands using an Average True Range (ATR) multiplier. These bands adapt with market volatility and shift color based on prevailing price action, helping traders quickly identify bullish, bearish, or neutral conditions. Originality and Unique Features This script introduces originality by blending both price and volume in the core trend calculation, a technique that is more responsive than traditional moving average bands. Its multi-mode visualization (cloud, single-band, or line-only), combined with selective buy/sell signals, makes it flexible for discretionary and algorithmic strategies alike. Optional modules for take-profit signals based on z-score deviation and RSI slope, as well as buy-back detection logic with cooldown filters, offer practical tools for managing trades beyond simple entries. Explanation of Inputs Every user input in this script is included to give the trader control over behavior and visual presentation: Trend Length (len): Defines the lookback window for both the VWMA and EMA, controlling the sensitivity of the core trend baseline. A lower value makes the bands more reactive, while a higher value smooths out short-term noise. Extra Smoothing (smoothLen): Applies an additional EMA to the blended VWMA/EMA average. This second-level smoothing ensures the central trend line reacts gradually to shifts in price. Band Width (ATR Multiplier) (bandMult): Multiplies the ATR to create the width of the upper and lower bands around the trend line. Larger values widen the bands, capturing more volatility, while smaller values narrow them. ATR Length (atrLen): Sets the length of the ATR used in calculating band width and signal offsets. Longer values produce smoother band boundaries. Show Buy/Sell Signals (showSignals): Toggles the primary crossover/crossunder entry signals, which are labeled when the close crosses the upper or lower band. Visual Mode (visualMode): Allows selection between three display modes: --> Cloud: Shows both bands and the central trend line with a shaded background. --> Single Band: Displays only the active (upper or lower) band depending on trend state, with gradient fill to price. --> Line Only: Shows only the trend line for a minimal visual profile. Take Profit Signals (enableTP): Enables a z-score-based profit-taking signal system. Signals occur when price deviates significantly from the trend line and RSI confirms exhaustion. TP Z-Score Threshold (tpThreshold): Sets the z-score deviation required to trigger a take-profit signal. Higher values reduce the frequency of signals, focusing on more extreme moves. Re-Entries (enableBuyBack): Enables logic to signal when price reverts into the band after an initial breakout, suggesting a possible re-entry or pullback setup. Buy Back Cooldown (bars) (buyBackCooldown): Defines a minimum bar count before a new buy-back signal is allowed, preventing rapid retriggering in choppy conditions. Buy Offset and Sell Offset: Hidden inputs used to vertically adjust the placement of the Buy ("𝓤𝓹") and Sell ("𝓓𝓸𝔀𝓷") labels relative to the bands. These use ATR units to maintain proportionality across different instruments and timeframes. Take-Profit Signal Module The take-profit module uses a z-score of the distance between price and the trend line to detect extended conditions. In bullish trends, a signal appears when price is well above the band and RSI indicates exhaustion; the opposite applies for bearish conditions. A boolean flag is used to prevent retriggering until RSI resets. These signals are plotted with minimalist “X” markers near recent highs or lows, based on whether the market is extended upward or downward. Re-Entry Logic The re-entry system identifies instances where price momentarily dips or spikes into the opposite band but closes back inside, implying a continuation of the prevailing trend. This module can be particularly useful for traders managing entries after brief pullbacks. A built-in cooldown period helps filter out noise and prevents signal overloading during fast markets. Visual markers are shown as upward or downward arrows near the relevant candle wicks. How to Use This Indicator The basic usage of this indicator follows a directional, signal-driven approach. When a buy signal appears, it suggests entering a long position. The recommended stop loss placement is below the lower band, allowing for some breathing space to accommodate natural volatility. As the position progresses, take partial profits—typically 10% to 15% of the position—each time a take-profit signal (marked with an "X") is shown on the chart. An optional feature is the buy-back signal, which can be used to re-enter after partial exits or missed entries. Utilizing this can help reduce losses during false breakouts or trend reversals by scaling in more gradually. However, it also means that in strong, clean trends, the full position may not be captured from the start, potentially reducing the total return. It is up to the trader to decide whether to enter fully on the initial signal or incrementally using buy-backs. When a sell signal appears, the strategy advises fully exiting any long positions and immediately switching to a short position. The short trade follows the same logic: place your stop loss above the upper band with some margin, and again, take partial profits at each take-profit signal. Visual Presentation and Signal Labels All signals are plotted with clean, minimal labels that avoid clutter, and are color-coded using a custom palette designed to remain clear across light and dark chart themes. Bullish trends are marked in teal and bearish trends in magenta. Candles and wicks are also colored accordingly to align price action with the detected trend state. Buy and sell entries are marked with "𝓤𝓹" and "𝓓𝓸𝔀𝓷" labels. Summary In summary, the Uptrick: Volume Weighted Bands indicator provides a versatile, visually adaptive trend and volatility tool that can serve multiple styles of trading. Through its integration of price, volume, and volatility, along with modular take-profit and buy-back signaling, it aims to provide actionable structure across a range of market conditions. Disclaimer This indicator is for educational purposes only. Trading involves risk, and past performance does not guarantee future results. Always test strategies before applying them in live markets.
Pine Script® göstergesi
Uptrick tarafından
19
Iani Indicator 📊 **Iani Indicator** **Clean and simple trend direction tool** **Description:** Iani Indicator is a compact and easy-to-read visual tool based on EMA crossovers to identify market bias: **Buy, Sell, or Neutral**. * The background between EMAs shows the current trend: 🟩 **Green** – bullish trend (Buy) 🟥 **Red** – bearish trend (Sell) 🟨 **Yellow** – flat / neutral zone * Text labels “Buy”, “Sell”, or “Neutral” appear automatically when direction changes. * Works smoothly on any timeframe – ideal for both scalping and swing trading. **Purpose:** To give traders a clear, noise-free view of market direction at a glance. --- 👉 Short version (for TradingView “Short Description” field): **Simple EMA-based indicator showing Buy, Sell, or Neutral bias with clean background colors.**
Pine Script® göstergesi
Ianistefian tarafından
1