Şimdi başlat

M-oscillator

Standardized Cumulative Deltas [LuxAlgo]The Standardized Cumulative Deltas tool allows traders to compare the cumulative standardized open-close difference for up to 10 different tickers, allowing them to visualize the general sentiment for all selected tickers. These results allow the construction of two areas showing the average or extreme bullish and bearish cumulative change for all enabled tickers, providing a summarized view of the overall ticker group sentiment. 🔶 USAGE This tool is meant to give a full picture of the individuals and/or overall selected tickers, and unlike classical indicators, the displayed series of values is not meant to be directly interpreted over time. Given the selected lookback period, a majority of observations being above 0 indicate an overall bullish market for the asset. By default, the auto lookback period feature is enabled, allowing the tool to use all the visible bars for its calculations. Traders can also set the lookback period manually. The above chart uses a fixed lookback period of 500. Up to 10 tickers can be used. While major cryptocurrencies are set by default, the users can set a specific basket of assets, such as US equities, forex pairs, commodities, etc. 🔹 Densities The provided areas, here called densities, can be used to get an overall sentiment of the selected tickers. The upper density (bullish) processes positive deltas, while the lower one (bearish) processes negative ones. Interpretation is subject to the selected "Density Mode". Average: Densities track the average bullish/bearish cumulative deltas for the selected tickers. For example, a more prominent bullish density would indicate that, on average, cumulative deltas were positive across the tickers. Envelope: Densities track the extreme values made by bullish/bearish cumulative deltas for the selected tickers. Here, a more prominent density would indicate more volatile bullish/bearish movements, depending on the density. 🔹 Dashboard The tool features a dashboard with active tickers and their respective colors for traders' convenience. 🔶 DETAILS 🔹 Densities Densities are obtained by applying a forward-backward exponential moving average on the average, or the highest/lowest cumulative series, depending on the selected Density Mode. The resulting densities are smoothed by the "Smoothing" parameter located in the Settings panel, with higher values returning smoother envelopes with less variability. Do note that the smoothing method used here is subject to repainting. 🔶 SETTINGS Lookback: Select the lookback period and enable/disable the Auto Lookback feature Tickers: Enable/disable and select up to 10 tickers and their colors Density Mode: Determine how densities are calculated 🔹 Dashboard Show Dashboard: Enable/disable the dashboard Position: Select the dashboard position Size: Select the dashboard size 🔹 Style Density: Enable/disable the density areas Bullish Density: Select the color of the top density area Bearish Density: Select the color of the bottom density area Smoothing: Select the smoothing constant for the EMA calculation
Pine Script® göstergesi
LuxAlgo tarafından
3
Adaptive Valuation [BackQuant]Adaptive Valuation What this is A composite, zero-centered oscillator that standardizes several classic indicators and blends them into one “valuation” line. It computes RSI, CCI, Demarker, and the Price Zone Oscillator, converts each to a rolling z-score, then forms a weighted average. Optional smoothing, dynamic overbought and oversold bands, and an on-chart table make the inputs and the final score easy to inspect. How it works Components • RSI with its own lookback. • CCI with its own lookback. • DM (Demarker) with its own lookback. • PZO (Price Zone Oscillator) with its own lookback. Standardization via z-score Each component is transformed using a rolling z-score over lookback bars: z = (value − mean) ÷ stdev , where the mean is an EMA and the stdev is rolling. This puts all inputs on a comparable scale measured in standard deviations. Weighted blend The z-scores are combined with user weights w_rsi, w_cci, w_dm, w_pzo to produce a single valuation series. If desired, it is then smoothed with a selected moving average (SMA, EMA, WMA, HMA, RMA, DEMA, TEMA, LINREG, ALMA, T3). ALMA’s sigma input shapes its curve. Dynamic thresholds (optional) Two ways to set overbought and oversold: • Static : fixed levels at ob_thres and os_thres . • Dynamic : ±k·σ bands, where σ is the rolling standard deviation of the valuation over dynLen . Bands can be centered at zero or around the valuation’s rolling mean ( centerZero ). Visualization and UI • Zero line at 0 with gradient fill that darkens as the valuation moves away from 0. • Optional plotting of band lines and background highlights when OB or OS is active. • Optional candle and background coloring driven by the valuation. • Summary table showing each component’s current z-score, the final score, and a compact status. How it can be used • Bias filter : treat crosses above 0 as bullish bias and below 0 as bearish bias. • Mean-reversion context : look for exhaustion when the valuation enters the OB or OS region, then watch for exits from those regions or a return toward 0. • Signal confirmation : use the final score to confirm setups from structure or price action. • Adaptive banding : with dynamic thresholds, OB and OS adjust to prevailing variability rather than relying on fixed lines. • Component tuning : change weights to emphasize trend (raise DM, reduce RSI/CCI) or range behavior (raise RSI/CCI, reduce DM). PZO can help in swing environments. Why z-score blending helps Indicators often live on different scales. Z-scoring places them on a common, unitless axis, so a one-sigma move in RSI has comparable influence to a one-sigma move in CCI. This reduces scale bias and allows transparent weighting. It also facilitates regime-aware thresholds because the dynamic bands scale with recent dispersion. Inputs to know • Component lookbacks : rsilb, ccilb, dmlb, pzolb control each raw signal. • Standardization window : lookback sets the z-score memory. Longer smooths, shorter reacts. • Weights : w_rsi, w_cci, w_dm, w_pzo determine each component’s influence. • Smoothing : maType, smoothP, sig govern optional post-blend smoothing. • Dynamic bands : dyn_thres, dynLen, thres_k, centerZero configure the adaptive OB/OS logic. • UI : toggle the plot, table, candle coloring, and threshold lines. Reading the plot • Above 0 : composite pressure is positive. • Below 0 : composite pressure is negative. • OB region : valuation above the chosen OB line. Risk of mean reversion rises and momentum continuation needs evidence. • OS region : mirror logic on the downside. • Band exits : leaving OB or OS can serve as a normalization cue. Strengths • Normalizes heterogeneous signals into one interpretable series. • Adjustable component weights to match instrument behavior. • Dynamic thresholds adapt to changing volatility and drift. • Transparent diagnostics from the on-chart table. • Flexible smoothing choices, including ALMA and T3. Limitations and cautions • Z-scores assume a reasonably stationary window. Sharp regime shifts can make recent bands unrepresentative. • Highly correlated components can overweight the same effect. Consider adjusting weights to avoid double counting. • More smoothing adds lag. Less smoothing adds noise. • Dynamic bands recalibrate with dynLen ; if set too short, bands may swing excessively. If too long, bands can be slow to adapt. Practical tuning tips • Trending symbols: increase w_dm , use a modest smoother like EMA or T3, and use centerZero dynamic bands. • Choppy symbols: increase w_rsi and w_cci , consider ALMA with a higher sigma , and widen bands with a larger thres_k . • Multiday swing charts: lengthen lookback and dynLen to stabilize the scale. • Lower timeframes: shorten component lookbacks slightly and reduce smoothing to keep signals timely. Alerts • Enter and exit of Overbought and Oversold, based on the active band choice. • Bullish and bearish zero crosses. Use alerts as prompts to review context rather than as stand-alone trade commands. Final Remarks We created this to show people a different way of making indicators & trading. You can process normal indicators in multiple ways to enhance or change the signal, especially with this you can utilise machine learning to optimise the weights, then trade accordingly. All of the different components were selected to give some sort of signal, its made out of simple components yet is effective. As long as the user calibrates it to their Trading/ investing style you can find good results. Do not use anything standalone, ensure you are backtesting and creating a proper system.
Pine Script® göstergesi
BackQuant tarafından
Swing Points - Liquidity DR📌 Description This indicator highlights swing points and liquidity levels with clean visuals and flexible options. It automatically detects significant highs and lows, then plots liquidity zones using customizable lines, boxes, and labels. Volume and Open Interest Δ (OI Δ) filters are integrated to validate the strength of each level. ⚙️ Features Liquidity boxes plotted at swing highs and lows with customizable colors and styles. Toggle visibility for lines, boxes, and labels to keep charts clean. Filter swing levels using Volume thresholds and Open Interest Δ polarity (positive/negative). Multi-exchange OI data support: Binance, BitMEX, Kraken. Extend until fill or auto-remove levels once price interacts with them. Dark/Light theme support with full text/label styling controls. Lookback filter (days) to limit displayed levels for clarity. 🎯 Use Cases Identify liquidity pools where price is likely to react. Track smart money behavior around highs and lows. Combine volume + OI confirmation to focus only on high-value zones.
Pine Script® göstergesi
KSA_369 tarafından
Moving Average Adaptive RSI [BackQuant]Moving Average Adaptive RSI What this is A momentum oscillator that reshapes classic RSI into a zero-centered column plot and makes it adaptive. It builds RSI from two parts: • A sensitivity window that scans several recent bars to capture the strongest up and down impulses. • A selectable moving average that smooths those impulses before computing RSI. The output ranges roughly from −100 to +100 with 0 as the midline, with optional extra smoothing and built-in divergence detection. How it works Impulse extraction • For each bar the script inspects the last rsi_sen bars and collects upward and downward price changes versus the current price. • It keeps the maximum upward change and maximum downward change from that window, emphasizing true bursts over single-bar noise. MA-based averaging • The up and down impulse series are averaged with your chosen MA over rsi_len bars. • Supported MA types: SMA, EMA, DEMA, WMA, HMA, SMMA (RMA), TEMA. Zero-centered RSI transform • RS = UpMA ÷ DownMA, then mapped to a symmetric scale: 100 − 200 ÷ (1 + RS) . • Above 0 implies positive momentum bias. Below 0 implies negative momentum bias. Optional extra smoothing • A second smoothing pass can be applied to the final oscillator using smoothing_len and smooth_type . Toggle with “Use Extra Smoothing”. Visual encoding • The oscillator is drawn as columns around the zero line with a gradient that intensifies toward extremes. • Static bands mark 80 to 100 and −80 to −100 for extreme conditions. Key inputs and what they change • Price Source : input series for momentum. • Calculation Period (rsi_len) : primary averaging window on up and down components. Higher = smoother, slower. • Sensitivity (rsi_sen) : how many recent bars are scanned to find max impulses. Higher = more responsive to bursts. • Calculation Type (ma_type) : MA family that shapes the core behavior. HMA or DEMA is faster, SMA or SMMA is slower. • Smoothing Type and Length : optional second pass to calm noise on the final output. • UI toggles : show or hide the oscillator, candle painting, and extreme bands. Reading the oscillator • Midline cross up (0) : momentum bias turning positive. • Midline cross down (0) : momentum bias turning negative. • Positive territory : – 0 to 40: constructive but not stretched. – 40 to 80: strong momentum, continuation more likely. – Above 80: extreme risk of mean reversion grows. • Negative territory : mirror the same levels for the downside. Divergence detection The script plots four divergence types using pivot highs and lows on both price and the oscillator. Lookbacks are set by lbL and lbR . • Regular bullish : price lower low, oscillator higher low. Possible downside exhaustion. • Hidden bullish : price higher low, oscillator lower low. Bias to trend continuation up. • Regular bearish : price higher high, oscillator lower high. Possible upside exhaustion. • Hidden bearish : price lower high, oscillator higher high. Bias to trend continuation down. Labels: ℝ for regular, ℍ for hidden. Green for bullish, red for bearish. Candle coloring • Optional bar painting: green when the oscillator is above 0, red when below 0. This is for visual scanning only. Strengths • Adaptive sensitivity via a rolling impulse window that responds to genuine bursts. • Configurable MA core so you can match responsiveness to the instrument. • Zero-centered scale for simple regime reads with 0 as a clear bias line. • Built-in regular and hidden divergence mapping. • Flexible across symbols and timeframes once tuned. Limitations and cautions • Trends can remain extended. Treat extremes as context rather than automatic reversal signals. • Divergence quality depends on pivot lookbacks. Short lookbacks give more signals with more noise. Long lookbacks reduce noise but add lag. • Double smoothing can delay zero-line transitions. Balance smoothness and timeliness. Practical usage ideas • Regime filter : only take long setups from your separate method when the oscillator is above 0, shorts when below 0. • Pullback confirmation : in uptrends, look for dips that hold above 0 or turn up from 0 to 40. Reverse for downtrends. • Divergence as a heads-up : wait for a zero-line cross or a price trigger before acting on divergence. • Sensitivity tuning : start with rsi_sen 2 to 5 on faster timeframes, increase slightly on slower charts. Alerts • MA-A RSI Long : oscillator crosses above 0. • MA-A RSI Short : oscillator crosses below 0. Use these as bias or timing aids, not standalone trade commands. Settings quick reference • Calculation : Price Source, Calculation Type, Calculation Period, Sensitivity. • Smoothing : Smoothing Type, Smoothing Length, Use Extra Smoothing. • UI : Show Oscillator, Paint Candles, Show Static High and Low Levels. • Divergences : Pivot Lookback Left and Right, Div Signal Length, Show Detected Divergences. Final thoughts This tool reframes RSI by extracting strong short-term impulses and averaging them with a moving-average model of your choice, then presenting a zero-centered output for clear regime reads. Pair it with your structure, risk and execution process, and tune sensitivity and smoothing to the market you trade.
Pine Script® göstergesi
BackQuant tarafından
Tal's multi-indicator trading system# Tal's Trading Indicator - Complete Analysis ## Overview This is a comprehensive TradingView Pine Script indicator that combines multiple technical analysis tools into one unified system. The indicator is primarily written in Hebrew and includes several advanced features. ## Main Components ### 1. Cup & Handle Pattern Detection The core feature of this indicator is automated Cup & Handle pattern recognition: **Key Parameters:** - **Left/Right lookback periods**: Controls pivot point detection (3 left, 1 right default) - **Search range**: Looks back 50 bars for pattern formation - **Angle percentage**: 22% maximum angle between cup rim points - **Cup height percentages**: 22% for both top and bottom cup measurements - **Maximum breakouts**: 20% tolerance for false breakouts above/below pattern lines **Pattern Validation:** - Detects pivot highs and validates cup formation - Uses mathematical cosine calculations for cup shape validation - Checks for breakout violations within acceptable thresholds - Identifies handle formation within 30 bars maximum - Confirms breakout above cup rim ### 2. Technical Ratings System Integrates TradingView's technical rating system across multiple timeframes: **Supported Timeframes:** - Current timeframe (customizable) - 1 Hour, 4 Hour, Daily, Weekly, Monthly **Rating Categories:** - Moving Averages ratings - Oscillator ratings - Combined (All) ratings **Visual Display:** - Color-coded table (Strong Buy, Buy, Neutral, Sell, Strong Sell) - Multi-timeframe comparison - Customizable position and colors ### 3. Analyst Ratings Integration Displays professional analyst recommendations: **Included Data:** - Average price target - Median price target - High/low price estimates - Buy/Hold/Sell recommendation counts - Strong buy/sell recommendations **Visual Elements:** - Price target lines on chart - Comprehensive analyst table - Color-coded recommendation display ### 4. Moving Averages & Trend Analysis **Displayed Averages:** - 20-period SMA (blue) - 50-period SMA (yellow) - 150-period SMA (green) **Trend Logic:** - Bullish: Close > SMA20 > SMA50 > SMA150 - Used for signal filtering when enabled ### 5. Entry/Exit Signal System **Entry Conditions:** - Cup & Handle breakout confirmed - Optional trend filter (bullish alignment required) - No existing position **Take Profit Methods:** 1. **Classic Pattern Target**: Entry price + cup height 2. **Analyst Average Target**: Uses analyst average price target **Stop Loss Methods:** 1. **Handle Low**: Uses the lowest point of the handle 2. **Breakout Line**: Uses the cup rim level ## Visual Features ### Status Panel Real-time display showing: - Cup detection status - Handle detection status - Breakout confirmation - Current trend direction ### Color Coding - **Cup patterns**: Yellow fill with aqua borders - **Retracement zones**: Red highlighting - **Signals**: Green triangles for entries - **Levels**: Green/red lines for TP/SL ## User Customization ### Cup & Handle Settings - Pivot detection sensitivity - Pattern angle tolerance - Height requirements - Breakout thresholds - Visual display options ### Technical Ratings - Timeframe selection - Rating type focus (MAs, Oscillators, All) - Color scheme customization - Table positioning ### Signal System - Enable/disable signals - Trend filtering toggle - TP/SL calculation methods - Alert conditions ## Advanced Features ### Mathematical Validation - Uses cosine functions for cup shape verification - Percentage-based breakout tolerance - Dynamic handle detection within time windows ### Memory Management - Automatic cleanup of old pattern data - Array size limitations to prevent memory issues - Efficient storage of historical patterns ### Alert System - Configurable entry signal alerts - Real-time notifications for new opportunities ## Use Cases 1. **Pattern Traders**: Automated Cup & Handle detection with precise entry/exit levels 2. **Multi-timeframe Analysis**: Compare technical strength across different periods 3. **Fundamental Integration**: Combine technical patterns with analyst expectations 4. **Risk Management**: Built-in stop loss and take profit calculations ## Strengths - Comprehensive pattern recognition with mathematical validation - Multi-timeframe technical analysis integration - Professional analyst data inclusion - Flexible customization options - Built-in risk management tools ## Considerations - Complex indicator with many parameters to optimize - Pattern detection may have false signals in choppy markets - Requires understanding of Cup & Handle pattern characteristics - Best used in conjunction with other confirmation signals This indicator represents a sophisticated approach to combining classical chart patterns with modern technical analysis tools, making it suitable for both discretionary and systematic trading approaches.
Pine Script® göstergesi
talamir2025 tarafından
SMC - Institutional Confidence Oscillator [PhenLabs]📊 Institutional Confidence Oscillator Version: PineScript™v6 📌 Description The Institutional Confidence Oscillator (ICO) revolutionizes market analysis by automatically detecting and evaluating institutional activity at key support and resistance levels using our own in-house detection system. This sophisticated indicator combines volume analysis, volatility measurements, and mathematical confidence algorithms to provide real-time readings of institutional sentiment and zone strength. Using our advanced thin liquidity detection, the ICO identifies high-volume, narrow-range bars that signal institutional zone formation, then tracks how these zones perform under market pressure. The result is a dual-wave confidence oscillator that shows traders when institutions are actively defending price levels versus when they’re abandoning positions. The indicator transforms complex institutional behavior patterns into clear, actionable confidence percentiles, helping traders align with smart money movements and avoid common retail trading pitfalls. 🚀 Points of Innovation Automated thin liquidity zone detection using volume threshold multipliers and zone size filtering Dual-sided confidence tracking for both support and resistance levels simultaneously Sigmoid function processing for enhanced mathematical accuracy in confidence calculations Real-time institutional defense pattern analysis through complete test cycles Advanced visual smoothing options with multiple algorithmic methods (EMA, SMA, WMA, ALMA) Integrated momentum indicators and gradient visualization for enhanced signal clarity 🔧 Core Components Volume Threshold System: Analyzes volume ratios against baseline averages to identify institutional activity spikes Zone Detection Algorithm: Automatically identifies thin liquidity zones based on customizable volume and size parameters Confidence Lifecycle Engine: Tracks institutional defense patterns through complete observation windows Mathematical Processing Core: Uses sigmoid functions to convert raw market data into normalized confidence percentiles Visual Enhancement Suite: Provides multiple smoothing methods and customizable display options for optimal chart interpretation 🔥 Key Features Auto-Detection Technology: Automatically scans for institutional zones without manual intervention, saving analysis time Dual Confidence Tracking: Simultaneously monitors both support and resistance institutional activity for comprehensive market view Smart Zone Validation: Evaluates zone strength through volume analysis, adverse excursion measurement, and defense success rates Customizable Parameters: Extensive input options for volume thresholds, observation windows, and visual preferences Real-Time Updates: Continuously processes market data to provide current institutional confidence readings Enhanced Visualization: Features gradient fills, momentum indicators, and information panels for clear signal interpretation 🎨 Visualization Dual Oscillator Lines: Support confidence (cyan) and resistance confidence (red) plotted as percentage values 0-100% Gradient Fill Areas: Color-coded regions showing confidence dominance and strength levels Reference Grid Lines: Horizontal markers at 25%, 50%, and 75% levels for easy interpretation Information Panel: Real-time display of current confidence percentiles with color-coded dominance indicators Momentum Indicators: Rate of change visualization for confidence trends Background Highlights: Extreme confidence level alerts when readings exceed 80% 📖 Usage Guidelines Auto-Detection Settings Use Auto-Detection Default: true Description: Enables automatic thin liquidity zone identification based on volume and size criteria Volume Threshold Multiplier Default: 6.0, Range: 1.0+ Description: Controls sensitivity of volume spike detection for zone identification, higher values require more significant volume increases Volume MA Length Default: 15, Range: 1+ Description: Period for volume moving average baseline calculation, affects volume spike sensitivity Max Zone Height % Default: 0.5%, Range: 0.05%+ Description: Filters out wide price bars, keeping only thin liquidity zones as percentage of current price Confidence Logic Settings Test Observation Window Default: 20 bars, Range: 2+ Description: Number of bars to monitor zone tests for confidence calculation, longer windows provide more stable readings Clean Break Threshold Default: 1.5 ATR, Range: 0.1+ Description: ATR multiple required for zone invalidation, higher values make zones more persistent Visual Settings Smoothing Method Default: EMA, Options: SMA/EMA/WMA/ALMA Description: Algorithm for signal smoothing, EMA responds faster while SMA provides more stability Smoothing Length Default: 5, Range: 1-50 Description: Period for smoothing calculation, higher values create smoother lines with more lag ✅ Best Use Cases Trending market analysis where institutional zones provide reliable support/resistance levels Breakout confirmation by validating zone strength before position entry Divergence analysis when confidence shifts between support and resistance levels Risk management through identification of high-confidence institutional backing Market structure analysis for understanding institutional sentiment changes ⚠️ Limitations Performs best in liquid markets with clear institutional participation May produce false signals during low-volume or holiday trading periods Requires sufficient price history for accurate confidence calculations Confidence readings can fluctuate rapidly during high-impact news events Manual fallback zones may not reflect actual institutional activity 💡 What Makes This Unique Automated Detection: First Pine Script indicator to automatically identify thin liquidity zones using sophisticated volume analysis Dual-Sided Analysis: Simultaneously tracks institutional confidence for both support and resistance levels Mathematical Precision: Uses sigmoid functions for enhanced accuracy in confidence percentage calculations Real-Time Processing: Continuously evaluates institutional defense patterns as market conditions change Visual Innovation: Advanced smoothing options and gradient visualization for superior chart clarity 🔬 How It Works 1. Zone Identification Process: Scans for high-volume bars that exceed the volume threshold multiplier Filters bars by maximum zone height percentage to identify thin liquidity conditions Stores qualified zones with proximity threshold filtering for relevance 2. Confidence Calculation Process: Monitors price interaction with identified zones during observation windows Measures volume ratios and adverse excursions during zone tests Applies sigmoid function processing to normalize raw data into confidence percentiles 3. Real-Time Analysis Process: Continuously updates confidence readings as new market data becomes available Tracks institutional defense success rates and zone validation patterns Provides visual and numerical feedback through the oscillator display 💡 Note: The ICO works best when combined with traditional technical analysis and proper risk management. Higher confidence readings indicate stronger institutional backing but should be confirmed with price action and volume analysis. Consider using multiple timeframes for comprehensive market structure understanding.
Pine Script® göstergesi
PhenLabs tarafından
Big Mo’s Glaskugel — Macro Drawdown Risk (v1.1.2)What it does / what you see An at-a-glance drawdown-risk oscillator that blends several macro US signals. • A smooth, color-blended line (green→orange→red) shows the scaled risk score (0–100). • Subtle shading marks “re-steepen warning windows” (starts when the yield curve re-steepens after an inversion; ends on normalization/cool-down). • A compact status table summarizes: overall risk level, Yield Curve (10y–3m), Credit Stress (Baa–10y), Economy (LEI), and Valuation (CAPE). Data used & why Yield Curve (10y–3m) — FRED:T10Y3M. Inversions and subsequent re-steepens often precede recessions/equity drawdowns. Credit Stress — FRED:BAA10Y vs its 1-year average (deviation in bps). Widening credit spreads flag tightening financial conditions. Economy (LEI) — ECONOMICS:USLEI. 6-month annualized growth below a cutoff highlights macro deterioration. Valuation (CAPE) — SHILLER_PE_RATIO_MONTH. Elevated valuations can amplify downside risk. VIX spikes — optional boost that recognizes sudden risk repricings. Important disclaimer This is not a reliable or predictive indicator in all regimes. No guarantees or warranties of any kind are provided. It is not financial advice. Signals can be early, late, or wrong. That said, it leans on well-studied warning factors (yield-curve dynamics, credit spreads, LEI weakness, valuation extremes) that have flagged major market downturns in the past. Key customization / tweaks Weights for each component (Yield, Credit, LEI, VIX, CAPE). Thresholds: yield inversion months, re-steepen lookback, credit-stress bps, LEI cutoff, CAPE level, VIX spike levels. Re-steepen boost: enable/disable, base points, half-life decay. Shading behavior: cool-down bars to “unwarn,” max warning duration, only shade when risk ≠ green. Scaling & smoothing: dynamic rolling max, EMA length, yellow/red thresholds. Status table: position, and a snapshot mode to view values at a chosen historical time.
Pine Script® göstergesi
BigMo_GQ tarafından
Pi Cycle OscillatorThis oscillator combines the Pi Cycle Top indicator with a percentile-based approach to create a more precise and easy to read market timing tool. Instead of waiting for moving average crossovers, it shows you exactly how close you are to a potential market top. Orange background means you should start preparing for a potential top and look into taking profits. Red background means that the crossover has happened on the original Pi Cycle Indicator and that you should have already sold everything. (Crossover of the gray line aka 100) Thank you Bollinger Band Width Percentile - The_Caretaker Pi Cycle Top - megasyl20
Pine Script® göstergesi
jinasora tarafından
AekFreedom All-in-OneIndicator Description: All-in-One Technical Analysis Suite This indicator is an "All-in-One" tool designed to combine multiple popular technical analysis instruments into a single script. It allows traders to perform comprehensive chart analysis, reduce the number of indicators needed, and customize everything in one place. The core concept of this indicator is to display all elements as an overlay on the main price chart, providing a clear view of the relationship between the various tools and the price action. 💡 Key Features The indicator consists of 6 primary modules, each of which can be independently enabled, disabled, and customized through the Settings menu (⚙️). 1. Automatic Candle Pattern Coloring What it does: Detects significant reversal candlestick patterns and changes their color for easy identification. Patterns Detected: Engulfing (Bullish/Bearish): Identifies engulfing candles with a special condition that the "body must be larger than the wicks" to filter for only strong momentum candles. Pin Bar (Bullish/Bearish): Highlights candles with long wicks, indicating price rejection. Best for: Identifying potential reversal or continuation signals at key support and resistance levels. 2. FVG (Fair Value Gap) with Auto-Mitigation What it does: Detects price imbalances created by strong buying or selling pressure and draws them as price zones. Special Feature: When the price returns to "fill" or mitigate the gap, the FVG box is automatically deleted from the chart. This keeps the chart clean and displays only the currently relevant zones. Best for: Identifying key support and resistance zones where the price is likely to return and react. 3. VWAP and Standard Deviation Bands What it does: Displays the VWAP (Volume Weighted Average Price) line, which is the average price weighted by volume, along with Standard Deviation Bands. Customization: The VWAP calculation can be anchored to reset every Session (Day), Week, Month, or Year. Best for: Determining the intraday trend, identifying "fair value" zones, and serving as significant support and resistance levels. 4. Parabolic SAR (Stop and Reverse) What it does: Plots dots on the chart that trail the price to indicate trend direction. Application: Dots below price: Indicate an uptrend. Dots above price: Indicate a downtrend. Best for: Confirming trend direction and providing dynamic Trailing Stop points to protect profits. 5. 3 Customizable EMAs (Exponential Moving Averages) What it does: Displays three separate EMA lines, which are powerful, fundamental tools for trend analysis. Customization: The Length and Color of each of the three EMAs can be fully customized. Best for: Confirming trend strength, identifying pullback entry opportunities, and acting as dynamic support and resistance. 6. Bollinger Bands (BB) What it does: Displays a price channel that measures market volatility, consisting of a middle basis line (SMA) and upper/lower bands. Application: Squeezing Bands: Signal a period of low volatility and a potential for a strong breakout. Price touching outer bands: Can indicate short-term overbought or oversold conditions. Best for: Gauging volatility and identifying potential mean-reversion opportunities in ranging markets. ⚙️ How to Use and Customize The core strength of this indicator is its flexibility. Users can go to the indicator's Settings (⚙️) panel, where all functions are organized into clear groups. You can: Enable or Disable each tool independently. Customize all parameters, such as EMA lengths, band multipliers, colors, and more. Combine tools to fit your specific trading style. For example, you might use only FVG + VWAP for intraday trading, or EMAs + Candle Patterns for trend-following strategies. This indicator is like a "Swiss Army Knife" for traders, combining essential tools into one package to make chart analysis faster and more efficient.
Pine Script® göstergesi
AekFreedom tarafından
Sorry Cryptoface Market Cypher B//@version=5 indicator("Sorry Cryptoface Market Cypher B", shorttitle="SorryCF B", overlay=false) // 🙏 Respect to Cryptoface // Market Cipher is the brainchild of Cryptoface, who popularized the // combination of WaveTrend, Money Flow, RSI, and divergence signals into a // single package that has helped thousands of traders visualize momentum. // This script is *not* affiliated with or endorsed by him — it’s just an // open-source educational re-implementation inspired by his ideas. // Whether you love him or not, Cryptoface deserves credit for taking complex // oscillator theory and making it accessible to everyday traders. // ----------------------------------------------------------------------------- // Sorry Cryptoface Market Cypher B // // ✦ What it is // A de-cluttered, optimized rework of the popular Market Cipher B concept. // This fork strips out repaint-prone code and redundant signals, adds // higher-timeframe and trend filters, and introduces volatility & // money-flow gating to cut down on the "confetti signals" problem. // // ✦ Key Changes vs. Original MC-B // - Non-repainting security(): switched to request.security(..., lookahead_off) // - Inputs updated to Pine v5 (input.int, input.float, etc.) // - Trend filter: EMA or HTF WaveTrend required for alignment // - Volatility filter: minimum ADX & ATR % threshold to avoid chop // - Money Flow filter: signals require minimum |MFI| magnitude // - WaveTrend slope check: reject flat or contra-slope crosses // - Cooldown filter: prevents multiple signals within N bars // - Bar close confirmation: dots/alerts only fire once a candle is closed // - Hidden divergences + “second range” divergences disabled by default // (to reduce noise) but can be toggled on // // ✦ Components // - WaveTrend oscillator (2-line system + VWAP line) // - Money Flow Index + RSI overlay // - Stochastic RSI // - Divergence detection (WT, RSI, Stoch) // - Optional Schaff Trend Cycle // - Optional Sommi flags/diamonds (HTF confluence markers) // // ✦ Benefits // - Fewer false positives in sideways markets // - Signals aligned with trend & volatility regimes // - Removes repaint artifacts from higher-timeframe sources // - Cleaner chart (reduced “dot spam”) // - Still flexible: all original toggles/visuals retained // // ✦ Notes // - This is NOT the official Market Cipher. // - Educational / experimental use only. Do your own testing. // - Best tested on 2H–4H timeframes; short TFs may still look choppy // // ✦ Credits // Original open-source inspirations by LazyBear, RicardoSantos, LucemAnb, // falconCoin, dynausmaux, andreholanda73, TradingView community. // This fork modified by Lumina+Thomas (2025). // -----------------------------------------------------------------------------
Pine Script® göstergesi
kokenbakensoda tarafından
AekFreedom Trading OscillatorAekFreedom Trading Oscillator: User Guide Overview The AekFreedom Trading Oscillator is a comprehensive, all-in-one technical analysis tool designed for TradingView. It consolidates a powerful suite of essential indicators into a single, highly customizable indicator pane. The primary goal is to reduce chart clutter and provide traders with a multi-faceted view of the market, combining momentum, trend strength, volatility, and divergence signals in one place. Core Features & Indicators This script includes the following fully customizable indicators: Relative Strength Index (RSI): A core momentum oscillator used to measure the speed and change of price movements. It features gradient fills for overbought (70-100) and oversold (0-30) zones, along with an optional smoothing moving average. Stochastic Oscillator: Another momentum indicator that compares a particular closing price of a security to a range of its prices over a certain period of time to identify overbought and oversold conditions. MACD (Moving Average Convergence Divergence): A trend-following momentum indicator that shows the relationship between two exponential moving averages (EMAs). It includes the MACD line, Signal line, and Histogram. Awesome Oscillator (AO): A momentum indicator that measures the market's driving force by comparing recent momentum with general momentum over a wider timeframe. ADX (Average Directional Index): An indicator used to quantify the strength of a trend, regardless of its direction (up or down). An ADX value over 25 typically suggests a strong trend. ATR (Average True Range): A key indicator for measuring market volatility. Advanced Divergence Engine One of the most powerful features of this script is its built-in Divergence Engine. It can automatically detect and display both Regular Bullish and Regular Bearish divergences. Supported Indicators: Divergence detection is available for RSI, Awesome Oscillator (AO), and the MACD Line. Visual Signals: When a divergence is found, the script will: Draw a line on the oscillator connecting the relevant pivot points. Display a "Bull" or "Bear" label directly below or above the signal for easy identification. Alerts: You can set up alerts in TradingView that will trigger whenever a new divergence signal appears. How to Use: Settings Panel The indicator is fully customizable via the settings panel. Indicator Visibility This is your main control panel for toggling visuals on and off to keep your chart clean. Show...: Check or uncheck any indicator (e.g., Show RSI & MA, Show Stochastic, Show ATR) to display or hide it instantly. Show... Divergence: Use these checkboxes (e.g., Show RSI Divergence) to control the visibility of the divergence lines and labels on the chart. Indicator-Specific Settings Each indicator has its own group of settings for fine-tuning its parameters. RSI / AO / MACD Settings: Here you can adjust standard parameters like Length, Source, etc. IMPORTANT: Each of these has a Calculate Divergence checkbox. You must enable this checkbox for the script to perform the resource-intensive calculation for that indicator's divergence. Stochastic Settings: Adjust the %K Length, %K Smoothing, and %D Smoothing. ADX Settings: Adjust the ADX Smoothing and DI Length. ATR Settings: Adjust the Length for the ATR calculation. 📌 How to Enable Divergence Signals (2 Steps): To see divergence for an indicator (e.g., MACD), you must do two things: Go to "MACD Settings" and check the box for Calculate Divergence. Go to "Indicator Visibility" and ensure the box for Show MACD Divergence is also checked.
Pine Script® göstergesi
AekFreedom tarafından
Composite Money Flow (MFI + CMF + OBV z-score)Composite Money Flow gives a single, easy-to-read readout of buy/sell pressure by combining three complementary flows: MFI (Money Flow Index) — price × volume momentum, native 0..100 CMF (Chaikin Money Flow) — accumulation/distribution across the bar (≈ −1..+1) OBV z-score — manual OBV (cumulative signed volume) standardized, then squashed to −100..+100 All three are normalized to the same scale (−100..+100) and combined with user-set weights to form a composite Money Flow Score plus a Signal (SMA). Use thresholds to flag strong accumulation/distribution and alerts for timely notifications. What you get Money Flow Score (−100..+100) with color change at zero Signal line (SMA) to smooth whipsaw Upper/Lower thresholds (defaults +50 / −50) with optional background shading Component lines (optional) to see each contributor (MFI/CMF/OBV) on the same scale Six alerts: cross up/down 0, enter/exit extreme zones, cross above/below signal Inputs (key) Lengths: MFI Length, CMF Length, OBV Z-Score Length, Signal Smoothing Weights: Weight: MFI, Weight: CMF, Weight: OBV Z-Score (blend to taste) Zones: Upper Threshold (+), Lower Threshold (−) Display: Show Component Lines, Shade Background in Extreme Zones How traders use it Direction filter: Score > 0 favors longs; < 0 favors shorts. Momentum turns: Score crosses Signal → early shift in flow. Strength zones: Above Upper = strong buy pressure; below Lower = strong sell pressure. Confluence: Pair with structure (S/R, trend) and execution rules (ATR stop, risk budget). Notes (implementation) OBV is computed manually for compatibility; then standardized (z-score) and squashed to −100..+100 (softsign). All plots are non-repainting; signals update live until bar close like any indicator. Alerts Provided Money Flow crosses up 0 Money Flow crosses down 0 Money Flow enters positive zone (above Upper) Money Flow enters negative zone (below Lower) Money Flow crosses above Signal Money Flow crosses below Signal Good starting settings MFI 14, CMF 20, OBV Z-Score 50, Signal 9 Weights: MFI 1.0, CMF 1.0, OBV 1.0 Thresholds: +50 / −50 Turn on background shading for quick visual reads Disclaimer This script is for educational purposes only and is not financial advice or a recommendation. Trading involves risk; past results do not guarantee future performance. Signals can fail, especially around news and regime shifts. Test on paper, verify settings, and use appropriate position sizing and risk controls. You are solely responsible for your trading decisions.
Pine Script® göstergesi
fts4sure tarafından
Inverse Fisher Transform COMBO XThis is a vastly improved version of the indicator "Inverse Fisher Transform COMBO STO+RSI+CCIv2" by KIVANÇ fr3762 and updated previously by lordofcodes. This script includes all the original oscillators included in the original script including CCI, CCIv2, MFI, RSI, Stochastic, and SMI oscillators. In Inverse Fisher Transform, one looks for the indicator lines of your choosing to be either above or below the centerline as with all oscillators. In addition it has many new features that greatly enhance the variety of uses for this very helpful indicator. -Updated the script to indicator in pinescript v6. -An Inverse Fisher Transform of the Heikin Ashi Calculation has been included in the script, with both a raw Heikin Ashi signal output as well as a smoothed Heikin Ashi calculation are included. -In addition, bar coloring according to the raw Heikin Ashi calculation is included in order to allow for a standard bar chart to also give the visual indication of the Heikin Ashi chart type This allows the trader to maintain the accuracy of price information on the chart that standard candles provide while still being able to reference the smoothed trend calculation of Heikin Ashi candles. -Updated the script to add smoothing method and length inputs for each indicator. -Smoothing methods available include the original wma smoothing, as well as sma, ema, dema, tema, rma, hma, vwma, and t3 moving average calculations. -Now you can also select the method for calculating the Inverse Fisher Transform using either the default method of whether the oscillator is above or below the centerline, or to be based on the oscillator's position in relation to a signal line instead, which can potentially give more timely and accurate signals. -The signal line's length and moving average calculation method are also adjustable according to the same variety as the oscillators themselves. For simplicity the same signal line calculation will be applied to all oscillators except for the Heikin Ashi since Heikin Ashi is not an oscillator. In general, a low smoothing input works best for a slower moving average types such as rma and t3 which are my personal preference, while a larger number works better for the faster moving average calculations such as wma, hma, ema, dema, or tema. Though in practice, the combination of different smoothing methods and lengths across the variety of included indicators are greatly variable and can offer a complete trading strategy including long and short term trend analysis as well as volume analysis and Heikin Ashi candle analysis with just this one indicator. As always, one indicator never guarantees results, which is a problem this script seeks to address, but it still benefits one to look for confirmation from other indicators and methods. I hope you are able to find this indicator an effect addition to your trading strategy.
Pine Script® göstergesi
nathanieljens tarafından
Nearest Rank For Loop - [JTCAPITAL]Nearest Rank For Loop is used for trend-following using the median of the data. The indicator works by calculating in the following steps: 1. The median is calculated using the ranking length of the source and using "percentile nearest rank" to determine the middle value. This is done with the original length and the length devided by 3, averaged out to eliminate false signals from extremely fast and temporary market movements. 2. Over the length of the loop values get added based on the median being higher than the previous median. 3. The results of the for loop segment get smoothed out using an EMA. --Buy and sell conditions-- -When the for loop values get above the long threshold we enter a buying condition, we dont exit the buying condition until the for loop values get below the short condition. Which signals a short. -When the values stay between the thresholds the signal doesnt change. This and smoothing out the for loop values is used to eliminate false signals as much as possible. --Features and Parameters-- -Allows the changing of the length of the ranking (median) -Allows the usage of different sources -Allows changing of the paramaters over the start and end of the for loop segment -Allows changing the thresholds for longs and shorts -Allows changing the parameter for the smoothing using an EMA --Details-- Both the wide thresholds and the use of an EMA over the for loop values are used to eliminate as much false signals as possible. Aswell as deviding the length by 3 and taking the average from the medians. From testing this indicator we have found that using a very small value for the shorting gives the overall best performance. Since a fast market move wont immediately trigger a false signal, but it also wont massively delay entries and exits. It is recommended to change the parameter settings for different asset classes and timeframes based off volatility and fast and confusing market movements. Enjoy!
Pine Script® göstergesi
JTCapitalNL tarafından
SExI - Super Exhaustion Indicator [Da_Prof]As we know, the RSI can remain at "overbought" or "oversold" levels for long periods of time while the price continues in that direction. The SExI (Super Exhaustion Indicator) is an indicator designed to help detect exhaustion of strong moves. The SExI is a combination of the RSI and "upper" Aroon. For the indicator to trigger, the RSI has to be above or below a top/bottom trigger line when the Aroon has had a set number of drives up or down correspondingly. An Aroon top drive is defined as the Aroon hitting 100% on the current candle when the previous candle was below 100%. An Aroon bottom drive is defined as the Aroon hitting 0% on the current candle when the previous candle was above 0%. Consecutive top or bottom drives are counted and exhaustion triggers when these drives hit a setpoint (default is 5 drives = the Aroon exhaustion trigger). When Aroon exhaustion is triggered and the RSI is correspondingly above/below a trigger line, the overall indicator signals exhaustion. There are two lines for bottoms and tops, one each for a "normal" trigger and and an "extreme" trigger. The Aroon drives are visualized at the top and bottom of the indicator. The RSI is plotted as a line that crosses top and bottom trigger lines. There are extreme trigger values for both the bottom and top exhaustion triggers. --Da_Prof
Pine Script® göstergesi
Da_Prof tarafından
2
EMA Range OscillatorEMA Range Oscillator (ERO) - User Guide Overview The EMA Range Oscillator (ERO) is a technical indicator that measures the distance between two Exponential Moving Averages (EMAs) and the distance between price and EMA. It normalizes these distances into a 0-100 range, helping traders identify trend strength, market momentum, and potential reversal points. Components Main Line Green Line: EMA20 > EMA50 (Uptrend) Red Line: EMA20 < EMA50 (Downtrend) Histogram White Histogram: Price distance from EMA20 Key Levels Upper Level (80): High divergence zone Middle Level (50): Neutral zone Lower Level (20): Low divergence zone Parameters ParameterDefaultDescriptionFast EMA20Short-term EMA periodSlow EMA50Long-term EMA periodNormalization Period100Lookback period for scalingUpper80Upper threshold levelLower20Lower threshold level How to Read the Indicator High Values (Above 80) Strong trend in progress EMAs are widely separated High momentum Potential overbought/oversold conditions Watch for possible trend exhaustion Low Values (Below 20) Consolidation phase EMAs are close together Low volatility Potential breakout setup Range-bound market conditions Middle Zone (20-80) Normal market conditions Moderate trend strength Balanced momentum Look for directional clues from color changes
Pine Script® göstergesi
cgrmetin tarafından
cd_RSI_Divergence_CxGeneral: The Relative Strength Index (RSI) is a momentum oscillator widely used by traders in price analysis. In addition to showing overbought/oversold zones, divergences between RSI and price are also tracked to identify trading opportunities. The general consensus is that oscillators alone are not sufficient for entries and should be evaluated together with multiple confirmations. This oscillator is designed as an additional confirmation/compatible tool for strategies that already use higher time frame (HTF) sweeps and lower time frame (LTF) confirmations such as Change in State Delivery (CISD) or Change of Character (CHOCH). Features: While RSI oscillators are commonly displayed in line format (classic), this indicator also offers candlestick-style visualization. Depending on the selected source, period length, and EMA length, RSI can be displayed as lines and/or candlesticks. Divergence detection & tracking: Price and RSI values are monitored on the chosen higher time frame (from the menu) to determine highs and lows. For divergence display, the user can choose between two modes: 1- Alignment with HTF Sweep 2- All 1 - Alignment with HTF Sweep: First, the price must sweep the previous high/low of the candle on the HTF (i.e., break it) but fail to continue in that direction and return inside (sweep). If this condition is met, RSI values are checked: If price makes a high sweep but RSI fails to make a new high → divergence is confirmed. If price makes a low sweep but RSI fails to make a new low → divergence is confirmed. Divergence is then displayed on the chart. 2 - All: In this mode, sweep conditions are ignored. Divergence is confirmed if: Price makes a new high on HTF but RSI does not. RSI makes a new high on HTF but price does not. Price makes a new low on HTF but RSI does not. RSI makes a new low on HTF but price does not. Menu & Settings: RSI visualization (source + period length + EMA period length) Option to choose classic/candlestick style display Color customization Higher time frame selection Adjustable HTF boxes and table display Final notes: This oscillator is designed as an additional confirmation tool for strategies based on HTF sweep + LTF CISD/CHOCH confirmation logic. The chosen HTF in the oscillator should match the time frame where sweeps are expected. Divergence signals from this oscillator alone will not make you profitable. For spot trades, monitoring sweeps and divergences on higher time frames is more suitable (e.g., Daily–H1 / Weekly–H4). My personal usage preferences: Entry TF: 3m HTF bias: Daily + H1 Sweep + CISD: 30m / 3m Market Structure: 3m RSI divergence: HTF = 30m If all of them align bullish or bearish ( timeframe alignment ), I try to take the trade. I’d be glad to hear your feedback and suggestions for improvement. Happy trading!
Pine Script® göstergesi
cdikici71 tarafından
8
Dual Stochastic with Trend FilterThe "Dual Stochastic with Trend Filter" is an oscillator indicator designed to provide clearer, trend-aligned trading signals. It uses two distinct stochastic oscillators to identify potential entry points and incorporates an optional EMA-based trend filter to ensure that you are trading in the direction of the broader market momentum. How It Works and How to Use It This indicator combines two key technical analysis concepts: momentum (via stochastics) and trend (via moving averages). Core Components: Dual Stochastic Oscillators: Signal Line 1 (Blue): A standard stochastic oscillator. Signal Line 2 (Red): A second stochastic oscillator, often using a different source (like hlcc4) to provide a smoother, more reliable signal. A buy signal is generated when the Blue Line (d1) crosses above the Red Line (d2). A sell signal is generated when the Blue Line (d1) crosses below the Red Line (d2). Trend Filter (Optional): This feature uses a fast and a slow Exponential Moving Average (EMA) to determine the overall market trend. When the fast EMA is above the slow EMA, the background will turn green, indicating an uptrend. When the fast EMA is below the slow EMA, the background will turn red, indicating a downtrend. This filter can be toggled on or off in the indicator settings. How to Use: With Trend Filter Enabled (Recommended): Long (Buy) Entry: Look for a green triangle buy signal (▲). This signal only appears when: The Blue Signal Line crosses above the Red Signal Line. The market is in a confirmed uptrend (green background). Short (Sell) Entry: Look for a red triangle sell signal (▼). This signal only appears when: The Blue Signal Line crosses below the Red Signal Line. The market is in a confirmed downtrend (red background). Exit Signal: A yellow circle (●) appears to suggest closing an open trade. This signal is triggered for a long position if either the stochastics have a bearish cross or the trend flips to a downtrend. Conversely, for a short position, it's triggered by a bullish stochastic cross or a trend flip to an uptrend. With Trend Filter Disabled: If you turn off the "Use Trend Filter" option, the indicator will function as a simple dual stochastic crossover system. A green triangle (▲) will appear every time the Blue Line crosses above the Red Line. A red triangle (▼) will appear every time the Blue Line crosses below the Red Line. The background coloring and exit signals based on trend flips will be deactivated. This mode is more sensitive but may produce more false signals in choppy markets. Key Visuals: Blue Line: The primary signal line. Red Line: The secondary, often smoother, signal line. Green Triangle (▲): Bullish entry signal. Red Triangle (▼): Bearish entry signal. Yellow Circle (●): Suggested trade exit/stop. Green/Red Background: Visual confirmation of the current uptrend or downtrend. By filtering stochastic signals with the dominant trend, this indicator helps traders avoid common pitfalls like entering short positions during a strong uptrend or buying into a bearish market. This alignment of momentum and trend is key to improving signal quality. Disclaimer This indicator is provided for educational and informational purposes only and should not be considered as financial advice or a recommendation to buy or sell any asset. All trading and investment decisions are your own sole responsibility. Trading financial markets involves a high level of risk, and you may lose more than your initial investment. Past performance is not indicative of future results. The signals generated by this indicator are not guaranteed to be accurate, and you should always use this tool in conjunction with other forms of analysis and sound risk management practices. Before using this indicator in a live trading environment, it is strongly recommended that you backtest it thoroughly and practice with it on a demo account. The author is not responsible for any financial losses you may incur from using this script.
Pine Script® göstergesi
EkaSanatani tarafından
1