VaCs MLL V2Quick User Guide
S/R Levels: These are dynamic Support and Resistance lines. They represent "unmitigated" price levels. As soon as the price hits a line, it disappears to keep your chart clean.
BSL/SSL Zones: The red and green boxes represent Buy-Side Liquidity (Previous Day High) and Sell-Side Liquidity (Previous Day Low). These are magnet zones where the price often heads to hunt stop losses.
Leverage Calculator: The dashboard calculates the exact leverage you should use. If you set your "Risk Per Trade" to 5%, and the price hits the "Stop Loss Price," you will lose exactly 5% of your total capital.
Trend Status: Based on the Daily 30 EMA. If the background is Green (Bullish), look for long entries at S/R levels. If Red (Bearish), look for short entries.
Forecasting
MB Break & Retest MB Break & Retest + VWAP (ORB) is an Opening Range Breakout indicator built for intraday trading. It captures the first 15 minutes of the session to plot the Opening Range High, Low, and Midpoint. After the Opening Range is set, it looks for a confirmed breakout using two conditions: price must close a user-defined distance beyond the OR High or OR Low, and the breakout candle must meet a minimum 5-minute volume threshold. If both the OR High and OR Low break in the same session, the indicator flags the market as choppy and avoids taking trades.
Trades are not taken on the breakout candle. Instead, the script waits for price to retest the Opening Range midpoint and enter only when that retest shows acceptable confirmation. Optional filters include a close-position filter (requiring the candle to close in the top/bottom portion of its range), a minimum retest volume requirement, and a midpoint “respect” filter that requires price to reject away from the midpoint by a set distance rather than simply touching it.
An optional VWAP filter adds directional bias: longs are allowed only when the midpoint is sufficiently below VWAP (with a configurable buffer), and shorts are allowed only when the midpoint is sufficiently above VWAP. The VWAP line can be displayed, and the script tracks how many potential trades were filtered out by the VWAP rule.
The indicator also includes built-in trade management and visual risk tools. It plots stop-loss and take-profit zones, supports a partial profit target (taking 50% off at a specified move), and can move the stop to break-even once a configurable R:R threshold is reached. Entry, partial, break-even, stop, and target events can be labeled on the chart.
A live status panel shows the current state (watching, breakout detected, trade active, session closed, or choppy), along with OR levels, midpoint, VWAP context, and volume information. A backtest dashboard summarizes performance metrics such as net P/L, win rate, profit factor, average win/loss, long vs short stats, breakeven exits, partial exits, streaks, and VWAP-filtered counts.
SBMS RSI+MAThis is clearly indicating the RSI with colors on panel and gives idea about overbought and oversold easily in visually clear color bands.
We have made the Alerts facility for knowing the trend improving or trend slowing now.
If this is combined with RSI divergence can be best tool to spot revrsals like in case of Double Bottom OR Double Top to confirm for trade initiation.
ALL-IN ZONE X (EMA + BB + Swing + TP Panel)ALL-IN ZONE X is a technical analysis indicator designed to help traders identify high-probability trade zones using a combination of trend, volatility, and price structure.
This indicator integrates:
Exponential Moving Averages (EMA) for trend direction
Bollinger Bands (BB) to visualize volatility and price expansion
Swing structure detection to highlight potential market turning points
A Take Profit (TP) panel to assist with structured trade planning
ALL-IN ZONE X is intended for discretionary trading and educational purposes only.
It does not generate automated buy or sell orders and should be used as a confluence tool alongside proper risk management and market analysis.
Disclaimer:
This indicator does not provide financial advice. Trading involves risk, and past performance does not guarantee future results.
ALL-IN ZONE X (EMA + BB + Swing + TP Panel)ALL-IN ZONE X is a technical analysis indicator designed to help traders identify high-probability trade zones using a combination of trend, volatility, and price structure.
This indicator integrates:
Exponential Moving Averages (EMA) for trend direction
Bollinger Bands (BB) to visualize volatility and price expansion
Swing structure detection to highlight potential market turning points
A Take Profit (TP) panel to assist with structured trade planning
ALL-IN ZONE X is intended for discretionary trading and educational purposes only.
It does not generate automated buy or sell orders and should be used as a confluence tool alongside proper risk management and market analysis.
Disclaimer:
This indicator does not provide financial advice. Trading involves risk, and past performance does not guarantee future results.
VaCs-LMTF Pro V9.1 - Leverage Calc.Dynamic Take Profit (TP) and Stop Loss (SL)
How to Use This Feature in Margin Trading?
Dynamic Levels: When a "BUY" or "SELL" signal arrives, the indicator measures the current market volatility (ATR) and adjusts the stop level to allow for a "wick" margin.
RR Ratio (Reward/Risk): The default value is 1.5. You can set this to 2.0 or 3.0 to create larger targets.
Liquidity Alignment: If the TP and SL lines coincide with the Naked (Green/Red) lines on the chart, the reliability of this signal is much higher than that of a "liquidity buying" strategy.
USDC/USDT PremiumUSDC/USDT Premium Index
Overview
This indicator tracks the premium or discount of USD Coin (USDC) relative to Tether (USDT) using data from Binance. It serves as a barometer for sentiment within the stablecoin market. A premium on USDC often suggests a flight to quality or higher demand for a stablecoin perceived as more transparent and regulated.
Key Features
•
Premium Calculation: The premium is calculated as (USDC/USDT Price - 1) * 100 to represent the deviation from parity in basis points. For example, a value of 0.1 means USDC is trading at a 0.1% premium to USDT (i.e., a price of 1.001).
•
Dynamic Coloring: The indicator's line color changes based on its position relative to a moving average (MA):
•
Green: The premium is currently above its moving average, suggesting bullish momentum for USDC.
•
Red: The premium is below its moving average, indicating bearish momentum.
•
Zero Line: A zero line is plotted to clearly distinguish between a premium (above zero) and a discount (below zero).
•
Customizable MA: You can adjust the moving average period and type (SMA, EMA, etc.) to fine-tune the indicator's sensitivity.
How to Use
1.
Gauge Stablecoin Sentiment: A rising premium (green line) can indicate that traders are favoring USDC over USDT, which might happen during times of market uncertainty or concerns about USDT's reserves.
2.
Identify Shifts in Momentum: Look for the color to flip from red to green as a sign that the USDC premium is gaining strength. A flip from green to red may signal a weakening trend.
3.
Spot Extremes: Extreme deviations from the zero line can signal market stress or significant capital flows between the two major stablecoins.
Interpretation
•
Green Line (Premium > MA): Suggests that the short-term trend for the USDC premium is positive and strengthening.
•
Red Line (Premium < MA): Suggests that the short-term trend is negative, with USDC's value declining relative to its recent average against USDT.
•
Above Zero Line: USDC is trading at a premium to USDT.
•
Below Zero Line: USDC is trading at a discount to USDT.
This tool provides a nuanced view of the stablecoin ecosystem, helping traders understand capital flows and risk appetite. It is most effective when used to complement a broader market analysis strategy.
BTC Spot Premium Index (Coinbase - Binance )Overview
This indicator measures the price difference between Bitcoin (BTC) on Coinbase and Binance, providing insights into the buying pressure from US-based investors versus the global market. A positive premium suggests stronger buying activity on Coinbase, which is often interpreted as a bullish signal for BTC.
Key Features
•
Premium Calculation: The core of the indicator is the formula: Coinbase BTC Price - Binance BTC Price.
•
Visual Representation: The premium is plotted as an oscillator with a zero line. Positive values are colored green, and negative values are red, making it easy to identify the prevailing market sentiment.
•
Moving Average: A customizable moving average (default is a 20-period SMA) is included to help identify the trend of the premium. The MA line is displayed in white.
•
Adjustable Parameters: You can adjust the moving average length and type (SMA, EMA, WMA, RMA) to fit your trading style.
How to Use
1.
Identify US Market Sentiment: A sustained positive (green) premium suggests strong buying interest from the US market, which can be a precursor to price appreciation.
2.
Spot Trend Reversals: A crossover of the premium line above the zero line can signal a shift from bearish to bullish sentiment. Conversely, a cross below the zero line may indicate weakening US demand.
3.
Confirm with Moving Average: When the premium line crosses above its moving average, it can signal strengthening momentum. A cross below the MA may suggest a potential slowdown.
Interpretation
•
Green Area (Positive Premium): Indicates that BTC is trading at a higher price on Coinbase than on Binance. This is generally considered a bullish sign, as it reflects strong demand from US investors.
•
Red Area (Negative Premium): Indicates that BTC is trading at a lower price on Coinbase. This may suggest weaker demand in the US market or stronger selling pressure.
•
White Line (Moving Average): Helps to smooth out the premium data and identify the underlying trend. Use it as a dynamic support or resistance level for the premium itself.
This indicator is a powerful tool for gauging market sentiment and can be a valuable addition to any BTC trader's toolkit. However, it should be used in conjunction with other technical analysis tools and not as a standalone signal for making trading decisions.
Auto-FibsAuto Fibonacci (Auto Fib) Indicator - Description
The Auto Fibonacci (Auto Fib) indicator is a technical analysis tool that automatically plots Fibonacci retracement levels on a price chart based on recent, significant market swings. Unlike manual Fibonacci tools, auto Fib dynamically detects key swing highs and swing lows, then calculates and displays Fibonacci ratios without user intervention.
Previous Day Range MarkerThis indicator highlights the high and low of the last confirmed candle on the current timeframe and optionally displays the range of the previous trading day (Daily) on lower timeframes.
It also calculates and shows the candle range in percent, helping traders quickly assess volatility and higher-timeframe context.
All levels are plotted forward into the future and can be individually enabled or disabled.
Polynomial Trend Exhaustion & DivergencePolynomial Trend Exhaustion & Divergence
Overview
This indicator combines advanced polynomial regression analysis with momentum-based exhaustion detection and forecast-based divergence signals. It identifies potential trend reversals by analyzing when price momentum is fading (exhaustion) and when price direction conflicts with the mathematical trajectory projected by cubic polynomial forecasting (divergence).
The system uses optional source smoothing (Linear Regression Blend or Kalman filtering) to reduce noise before analysis, then applies two independent detection methods to generate high-probability reversal warnings.
Exhaustion Detection
What it detects: Trend exhaustion occurs when price is still moving in one direction but the underlying momentum is weakening—a classic early warning of potential reversal.
How it works:
The indicator calculates either a cubic polynomial regression or Kalman filter trend, then monitors the slope of that trend line. Exhaustion is detected when:
Bullish Exhaustion: The slope is positive (uptrend) but the rate of change of the slope is negative (momentum decelerating)
Bearish Exhaustion: The slope is negative (downtrend) but the rate of change of the slope is positive (momentum decelerating)
Signal filtering:
Consecutive Bars Required: Exhaustion conditions must persist for a configurable number of bars before triggering
Max Repeat Signals: Limits how many consecutive exhaustion signals can fire to prevent clustering
Cooldown Period: After hitting the max signal limit, the indicator pauses before allowing new signals
This produces clean, actionable warnings rather than noise during extended exhaustion phases.
Divergence Detection
What it detects: Divergence signals identify when the polynomial-projected future price path conflicts with current price direction—suggesting price may be overextended and due for a correction toward the forecast.
How it works:
The indicator fits a cubic polynomial to recent price data and extrapolates it forward by a configurable number of bars. It then compares:
Current price direction (rising or falling over the lookback period)
Forecast position (above or below current price)
Divergence triggers when:
Bullish Divergence: Price is falling but the polynomial forecast is above current price (suggesting upward reversion)
Bearish Divergence: Price is rising but the polynomial forecast is below current price (suggesting downward reversion)
Signal filtering:
Minimum Divergence (ATR): The forecast must be at least X ATRs away from price
Minimum Price Movement (ATR): Price must have moved at least X ATRs over the lookback period (filters out sideways noise)
Consecutive Bars Required: Divergence conditions must persist for X bars before triggering
Cooldown Period: Minimum bars between divergence signals of the same type
Key Features
Dual trend methods: Choose between Polynomial Regression or Kalman filtering for the base trend calculation
Source smoothing options: None, LinReg Blend, or Kalman filter applied to OHLC data before analysis
ATR-normalized thresholds: All filter thresholds adapt to current volatility
Anti-clustering logic: Built-in repeat limits and cooldowns prevent signal spam during extended conditions
Full alert support: All four signal types (Bull/Bear Exhaustion, Bullish/Bearish Divergence) have dedicated alert conditions
Volume InsiderThis indicator shows you the percentage of buyers and sellers per candle on any time frame. Please go into the setting and change the color for buy and sell to whatever you would like.
John Trade AlertsImagine you are watching a ball bounce up and down on a graph.
This script is like a set of rules that says:
When to start playing
When to stop playing
When you got some prize levels
and it yells to you (alerts) when those things happen.
The main ideas
Breakout Buy (ball jumps high)
There is a line drawn high on the chart called the breakout level.
If the price (the ball) closes above that line, and some extra “good conditions” are true (enough volume, uptrend, etc.),
the script says: “We entered a Breakout trade now.”
Pullback Buy (ball dips into a box)
There is a zone (a small box) between a low line and a high line: the pullback zone.
If the price closes inside that zone, and the pullback looks “healthy” (not too much volume, still above a moving average, etc.),
the script says: “We entered a Pullback trade now.”
Stops (when to get out if it goes wrong)
For each entry type (Breakout or Pullback), there is a red stop line under the price.
If the price falls below that stop line, the script says:
“Stop hit, we’re out of the trade.”
Hard Support / Invalidation (big no‑no level)
There is a special hard support line.
The script also looks at the 1‑hour chart in the background.
If a 1‑hour candle closes below that hard support, it says:
“Hard invalidation – idea is broken, get out.”
Targets (prize levels)
Above the current price there are several orange lines: Target 1, 2, 3A, 3B, 4A, 4B.
If the price goes up and crosses one of these lines, the script says:
“Target X reached!”
Trend and Volume “health checks”
It checks if the short‑term average price (SMA20) is going up → “uptrend.”
It can check if price is above a long‑term average (SMA200).
For breakouts, it checks if volume is stronger than usual (good push).
For pullbacks, it prefers quieter than usual volume (calm dip).
It can also check an Anchored VWAP line (a special average price from a chosen starting time) and only trade if price is above that too.
Remembering if you are “in a trade”
The script keeps a little memory:
Are we currently in a position (inPos) or not?
Was it a Breakout or a Pullback entry?
What is our entry price and active stop?
When it gets a new entry signal, it turns inPos to true, picks the right stop, and draws that stop line.
When a stop or hard invalidation happens, it sets inPos to false again.
It can also “forget” and reset at the start of a new trading day if you want.
Alerts
When:
you get a Breakout entry
or a Pullback entry
or a Stop is hit
or the hard support is broken on 1‑hour
or a Target is reached
the script sends a message you can use in TradingView alerts (pop‑ups, email, webhook, etc.).
Things you see on the chart
Teal line: Breakout level
Green lines: Pullback zone low & high
Red line: Active stop (only when you’re “in” a trade)
Orange lines: Targets 1, 2, 3A, 3B, 4A, 4B
Blue line: Anchored VWAP (if you turn it on)
Purple faint line: SMA20 (short‑term trend)
Gray faint line: SMA200 (long‑term trend)
Little label near the last bar that says:
if you’re IN or Flat
which type of entry (Breakout/Pullback)
what your current stop is
So in kid words:
It draws important lines on the chart.
It watches the price move like a ball.
When the ball does something special (jump above, fall below, hit a prize line),
it shouts to you with alerts.
It remembers if you’re in the game or not, and where your safety line (stop) is.
90m Quarter SSMT V1.02 {-TS}Overview: This script is a professional-grade indicator tailored for ICT (Inner Circle Trader) practitioners. It automates the visualization of 90-minute Quarters within major trading sessions and detects SMT (Smart Money Technique) Divergences across multiple symbols. It helps traders identify institutional accumulation/distribution by monitoring price action disparities between the current asset and chosen correlates (e.g., BTC vs. ETH).
Key Features:
Four Major Trading Sessions: Automatically segments the market into Asia, London, NY AM, and NY PM sessions with customizable timezone settings.
90-Minute Quarter Layout: Subdivides each session into four distinct 90-minute "Quarters" (Q1-Q4) using color-coded boxes to aid in "Time & Price" analysis.
Automated SMT Divergence Detection:
Daily/Session SMT: Compares the highs and lows of the current session against the previous session to find macro-level divergences.
90m Quarter SMT (Real-time): Performs micro-level analysis by comparing current quarter extremes with the previous one, offering early signals for potential reversals.
Dynamic Visual Annotations: Automatically draws trendlines and labels on the chart when bullish or bearish SMT is detected, clearly identifying which reference symbol is diverging.
Trading Application: Ideal for identifying "Judas Swings," confirming market structure shifts (MSS), and finding high-probability entries at the start of new time cycles.
Adaptive Multi-Method ForecastWhat This Indicator Does:
An intelligent forecasting system that predicts future price movement and provides automated TP/SL levels for trading across ALL timeframes.
📊 Core Features:
1. Adaptive Forecasting (3 Methods)
Linear Regression: Best for trending markets (Daily/Weekly)
EMA Projection: Best for fast-moving intraday (1m-1h)
Hybrid: Combines both methods for balanced approach
Auto Mode: Automatically selects the best method for your timeframe ✅
2. Visual Elements on Chart:
ElementColorWhat It ShowsForecast Line🟢 Green (bullish) / 🔴 Red (bearish) / 🟡 Yellow (neutral)Predicted price in X bars aheadLR Line (Blue)🔵 BlueLinear regression trend lineConfidence Zone🟢/🔴 Shaded area (65% visible)Probable price rangeUpper/Lower Bands🟢 Green / 🔴 Red lines (65% visible)Forecast uncertainty boundariesBUY Signal🟢 Small green triangle ▲Price crossed above trend - Long opportunitySELL Signal🔴 Small red triangle ▼Price crossed below trend - Short opportunity
3. Trade Management (TP/SL)
When BUY signal appears:
🟡 Yellow line = Entry price (where you bought)
🟢 Green line = Take Profit target (+2.5% by default)
🔴 Red line = Stop Loss (-1.5% by default)
When SELL signal appears:
🟡 Yellow line = Entry price (where you sold)
🟠 Orange line = Take Profit target (-2.5%)
🟣 Fuchsia line = Stop Loss (+1.5%)
Lines disappear when:
TP is hit ✅ (profit secured)
SL is hit ❌ (loss cut)
Ready for next signal
📱 Info Table (Top Right):
Shows real-time data:
Method: Which forecast method is active
Timeframe: Your current chart timeframe
Trend: Bullish ↑ / Bearish ↓ / Neutral →
Current: Current price
Forecast: Predicted price
Change: Expected % move
Position: LONG / SHORT / None
Entry: Your entry price (when in position)
P&L: Current profit/loss % (when in position)
⚙️ Settings You Can Adjust:
Forecast Settings:
Method: Auto (recommended) / Linear / EMA / Hybrid
Length: 20 bars (how much history to analyze)
Forecast Bars: 10 bars ahead (prediction distance)
Sensitivity: 1.0 (higher = more aggressive forecast)
Show Confidence Bands: ✅ On/Off
Trade Management:
Show TP/SL Levels: ✅ On/Off
Take Profit %: 2.5% (adjustable)
Stop Loss %: 1.5% (adjustable)
Use Forecast as TP: ❌ Off (uses fixed % instead)
🔔 Alerts Available:
BUY Signal - Bullish crossover detected
SELL Signal - Bearish crossunder detected
Long TP Hit - Take profit reached
Long SL Hit - Stop loss triggered
Short TP Hit - Take profit reached
Short SL Hit - Stop loss triggered
✅ Works On All Timeframes:
✅ Intraday: 1m, 5m, 15m, 30m, 1h (uses EMA Projection)
✅ Swing: 4h, Daily (uses Hybrid)
✅ Position: Weekly, Monthly (uses Linear Regression)
📈 How To Use:
Add to chart - Indicator loads automatically
Wait for signal - Green ▲ (BUY) or Red ▼ (SELL)
Enter trade - Yellow entry line appears
Set alerts - Get notified on TP/SL hits
Exit auto - When price hits green (TP) or red (SL) line
Repeat - Wait for next signal
⚠️ Important Notes:
Not 100% accurate - No indicator predicts perfectly
Use risk management - Always respect stop losses
Best in trends - Less accurate in sideways markets
Combine with other analysis - Support/resistance, volume, news
Backtest first - Test on historical data before live trading
🎯 Best Practices:
✅ Keep on "Auto" mode for best results
✅ Use on trending assets (stocks, crypto with clear direction)
✅ Respect all stop losses
✅ Don't override forecast with emotions
✅ Start with 10 forecast bars, adjust based on your trading style
✅ Enable all alerts for real-time notifications
Forecast OscillatorGeneral Overview
The Forecast Oscillator Plus (FOSC+) is not just another oscillator. It is an advanced quantitative analysis tool developed to bridge the gap left by traditional momentum indicators (like RSI or Stochastic) which often suffer from "lag" or remain pinned in extreme zones during strong trends.
This "Plus" version has been specifically engineered and optimized for high-velocity scalping and day-trading on assets like NAS100 (Nasdaq) and XAUUSD (Gold) using ultra-short timeframes (1-min, 5-min).
🛡️ Why is FOSC+ Different?
1. Linear Regression Intelligence
At the heart of this script is a powerful Linear Regression (LinReg) engine. Instead of comparing price to a simple average, FOSC+ calculates the percentage deviation between the current price and its predicted theoretical trajectory. This allows the indicator to identify not just if the price is "high" or "low," but if it is abnormally distanced from its current trend, signaling an imminent Mean Reversion.
2. Adaptive Dynamic Bands (Volatility-Adjusted)
A major weakness of classic oscillators is the use of fixed levels (e.g., 80/20). FOSC+ utilizes Standard Deviation to generate overbought and oversold zones that "breathe" with the market.
During high volatility, the bands expand to filter out noise and premature entries.
During low volatility, they tighten to capture precise turning points.
3. Institutional Volume Filter (Anti-Fakeout)
To succeed in the Nasdaq market, you must follow the "Smart Money." This script integrates a Volume Spike Filter. A signal (Buy/Sell) is only triggered if the current candle's volume is significantly higher than its moving average (adjustable multiplier). This ensures you only enter trades backed by real institutional strength.
4. Algo-Ready for PineConnector
The code has been structured for seamless automation. With built-in EMA smoothing to reduce 1-minute "market chatter," the signals are clean and sharp, minimizing execution errors when sending orders to MetaTrader 5 via PineConnector.
📈 Technical Trading Guide
Buy Signals (Green Triangle): Occur when the oscillator crosses above the dynamic oversold band OR crosses back above the zero line, provided that volume confirms the impulse.
Sell Signals (Red Triangle): Occur when the oscillator crosses below the dynamic overbought band OR breaks below the zero line from above, with volume confirmation.
Momentum Histogram: The colored columns indicate acceleration strength. Excellent for Trailing Stops: as long as the histogram is growing, the momentum is in your favor!.
⚙️ Recommended Parameters
Length (14): The "Sweet Spot" for balancing reactivity and reliability.
Smooth Len (4): Essential for 1-min charts to eliminate micro-fluctuations without adding lag.
Volume Mult (1.15): Filters out the bottom 15% of volume to keep only significant candles.
⚠️ Stress-Tested for Real Conditions
This script has been rigorously backtested with Slippage settings ranging from 10 to 25 points. Even under difficult market conditions with high spreads, the indicator maintains a positive expectancy, making it a premier tool for traders using Standard or Raw accounts.
US Stock Indexes Fundamental and Technical AnalysisThis indicator provides, real-time fundamental and technical analysis for the US stock market. It can be used for S&P 500 (SPX), NASDAQ 100 (NDX), Dow Jones (DJI), and the Russell 2000 (RUT).
Unlike standard lagging indicators, this tool combines Macro Data with technicals to forecast potential market shifts and identify trend strength.
QFX (Quantum foreign Exchange) PublicI actually use this trading signal tool myself before sharing it. It gives clear long and short signals by analyzing EMAs, mathematical calculations, and market patterns, so whether you’re just starting out or have been trading for years, it helps you spot setups and make smarter, more confident decisions.
Opening Range (RTH, Globex, Tokyo, London) [Tradeisto]This indicator provides a comprehensive solution for monitoring Opening Ranges across major global trading sessions—RTH (New York), Globex, Tokyo, and London, within a single script. It is designed for stability and precision on all timeframes.
Key Features
Multi-Session Support: Track four distinct opening ranges simultaneously:
RTH (New York): Auto-detects based on asset class:
Indices (NQ, ES, YM): 09:30 NY
Metals (Gold/Silver): 08:20 / 08:25 NY
Energy (Oil/NatGas): 09:00 NY
Currencies & More: Automatically sets the correct pit open.
Globex: 18:00 America/New_York
Tokyo: 09:00 Asia/Tokyo
London: 08:00 Europe/London
Native Timezone Handling:
Automatically adjusts for Daylight Saving Time (DST) using native Pine Script timezones.
Smart Labeling: Evening sessions (Globex, Tokyo) display the correct "Trading Day" date (e.g., Sunday evening labeled as Monday).
Hybrid Data Engine:
Ensures stability by automatically switching data fetching methods based on your chart's timeframe.
Zoom In: Uses request.security_lower_tf for high-resolution data when the Chart Timeframe > Session Duration.
Zoom Out: Uses standard request.security when the Chart Timeframe <= Session Duration, preventing runtime errors.
Customizable Durations:
Independently configure durations for each session (30s, 1m, 5m, 15m, 30m).
How to Use
Add Opening Range to your chart.
Open Settings to enable or disable specific sessions.
Select the desired Duration for each session.
Customize colors and borders to fit your chart theme.
Order Block Phenix v1.0Order Block Fenix is an indicator designed to identify true institutional order blocks based on clean market structure and price impulse.
The indicator automatically detects the last opposite candle before an impulsive move that resulted in:
• a Break of High, or
• a Break of Low.
The order block is built using the body of that candle:
• Bullish Order Block — the last bearish candle before a strong bullish impulse
• Bearish Order Block — the last bullish candle before a strong bearish impulse
Core Logic
Order Block Fenix relies only on confirmed market events:
1. Structure Break (Break of High / Break of Low)
An order block is formed only if price genuinely breaks the previous high or low.
2. Impulse Move
The impulse can consist of:
• one large directional candle, or
• a sequence of multiple consecutive directional candles.
3. No Overlap (Imbalance)
The impulse must not be “contaminated” by overlapping wicks from previous candles.
Small wicks are acceptable, but full range overlap is not.
Order Block Invalidation
An order block is permanently removed if:
• Bullish OB — price breaks the zone to the downside,
• Bearish OB — price breaks the zone to the upside.
Once invalidated, order blocks are deleted forever and never reappear.
What This Approach Delivers
• Only valid, non-invalidated order blocks remain on the chart
• Old and broken zones are automatically removed
• Clear insight into where the market has truly defended price
Best Used For
• spot and margin trading
• market structure analysis
• Smart Money concepts
• swing and position trading
Order Block Fenix does not draw noise.
It shows only what the market has truly confirmed.
Hayaller ve Gercekler Beam - Chaos Projection & Temporal Nexus
Markets are more than just numbers; they are reflections of time, energy, and human psychology.
Beam is designed to find the hidden order within market chaos and map out the "price-time" intersections that the market has yet to reach. While standard indicators only analyze the past, Beam generates forward-looking projections using non-linear logic.
Core Highlights:
Temporal Mapping (X-Mapping): Visual markers indicating where price and time are expected to converge in the future.
Dynamic Revision: When the market triggers a new imbalance (chaos) signal, the system instantly validates or revises its previous projections.
Four-Dimensional Analysis: By categorizing the market into four primary zones, it identifies the unique momentum and "future bar" targets of each phase.
Key Note: This algorithm has been tested on selected low-volatility (slow-moving) assets, yielding a consistency rate exceeding 70%. We encourage you to perform your own tests and share your results to help refine the logic further.
TradeSkull Opening Candle Box range of your choiceopening candle range box....pick your time and you will have the high/low and extended range box that you can edit
Automated Risk Management HUDDESCRIPTION:
"Amateurs focus on how much they can make. Professionals focus on how much they can lose."
Most traders fail Funding Challenges (FTMO, The 5ers, etc.) not because they lack a strategy, but because of poor Risk Management and psychological loss of control.
Architect's Sentinel Pro is not just a position size calculator. It is a Discipline Enforcement System integrated directly into your chart. It eliminates mental math, prevents contract size errors, and acts as a psychological barrier against revenge trading.
CORE FEATURES:
1. Precision Asset Engine Stop guessing contract sizes. The engine automatically adjusts calculation logic for:
XAUUSD (Gold): Standardized for 100oz contracts.
Forex Majors: Standardized for 100,000 units.
JPY Pairs: Adjusted scaling.
Indices/Crypto: Flexible support.
2. Professional HUD (Heads-Up Display) A non-intrusive dashboard located at the top-right corner. It displays:
Exact Risk ($): precise to 2 decimal places.
Lot Size: Calculated instantly based on your risk parameters.
SL Levels: The exact price levels you need to input into your execution platform.
3. The "Bullet" System (Psychology Control) Gamify your risk. You input your Daily Loss Limit (e.g., $125). The tool calculates how many "Bullets" (Trades) you have left based on your risk per trade.
Green: Safe zone.
Orange: Caution (1 trade left).
RED: Daily Limit Reached -> CEASE TRADING IMMEDIATELY.
4. Hybrid Calculation Modes
Risk Based: You define the Max Risk ($) -> The tool calculates the Max Lot.
Lot Based: You define the Lot Size -> The tool audits the risk. If the calculated risk exceeds your limit, the HUD flashes a "VIOLATION" alert.
5. Flexible Stop Loss Logic
Auto (ATR Dynamic): Uses Average True Range to adapt SL to market volatility.
Fixed Distance: Set a fixed price distance (e.g., $5.00 on Gold).
Manual Level: Enter a specific price level for structural stops.
HOW TO USE:
Configuration: Open Settings. Input your Risk per Trade ($) and Daily Loss Limit ($).
Execution: Look at the HUD.
If BLUE/GREEN: Enter the Lot Size and SL Price shown.
If RED: Do not trade.
Accountability: If you take a loss, open Settings and increment the Losses Today counter. The system will deduct a "Bullet" from your inventory.
"Architects sell Blueprints, not Manual Labor." Let the tool handle the math. You focus on the execution.
