Şimdi başlat

E-signal

Peak/Valley EstimationEarly Signal Estimating the Peaks and Valleys or extrema of the price is one of the best way to catch up early movements of a trend. Of course there is no perfect way to do so, if we want a perfect estimation of peaks and valleys then we must use a non causal indicator ( repainting ), if we want a causal indicator ( non repainting ) then we will need to tradeoff accuracy for allowing our indicator to be causal, its always a matter of tradeoff at the end when trying to have a desired effect (smoothness/lag for filters) .Our indicator is causal, it wont repaint but the accuracy will depend on various parameters. In order to detect peaks and valleys in a certain period we must detrend the price, this mean subtracting it by its moving average. We take the absolute value of this result and we filter it with a local linear regression ( LSMA ) in order to eliminate noise, then we make the assumption that the highest of our result is or a peak or a valley of the price, so we divide our detrended calculation by its highest and we get a scaled result. Lets call this final result the peak index . Parameters There are 3 parameters in this indicator, a length parameter who control the period of the highest mentioned above, a smooth parameter who smooth our detrended price, and finally a mod parameter who select the trigger method for estimating a peak/valley. Here are how mods work : mod = 1 : when the peak index is equal to 1 and the previous value is not equal to 1 then we have a peak/valley. Its the fastest of the 3 mods but the one with less accuracy. mod = 2 : when the peak index crossunder 0.8 then we have a peak/valley. This method is more robust but slower than the previous one. mod = 3 : when the peak index is not equal to 1 and the previous peak index is equal to 1 then we have a peak/valley. Its an average of the precedents mod in term of speed and accuracy. Lower length values tend to estimate the peak/valley of short periods of time but can also lead to the reverse desired effect ( breakouts signals ). Smoothing is important since it reduce the number of noise in our calculation and therefore help to get better results, its a parameter that should be high, sometimes higher than length if this one is low. Estimation of medium terms peaks/valleys with length and smooth parameter both period 100 and mod = 3 Estimation peaks in palladium way to early, an example of bad accuracy. Such behaviour can be fixed with a change in the parameters. Complementarity With Classics Indicators As i said before its always a matter of tradeoff, here we get faster signals but we loose in accuracy, at the contrary classics indicators often have slower signals but with more accuracy. Mixing both of them can provide additional robustness in a strategy, lets take back our palladium case, using mod 3 could have been better, but its still not optimal, so lets use a classic indicator such as a moving average of period 200, our conditions are : Long when our peak/valley estimator estimated a valley and the price crossover our moving average. Short when our peak/valley estimator estimated a peak and the price crossunder our moving average. here is an exemple of such signal : We balanced our tradeoff in a way to fix both methods problems, of course its still not a perfect fix but it provide more robustness. Other Uses The indicator can also be used only as an order closing indicator, its safer than taking a position based on its estimation. The indicator can also give a use to the peak index used in the calculation as a trend strength indicator. Values below 0.5 indicate a ranging market while values over 0.5 indicate a trending market.Since its a scaled measure you can use it a smoothing constant in a adaptive filter. Conclusions I showed how to estimate peaks and valleys and how to use such information in order to make better decision when using classical indicators, of course at the end nothing is perfect and considering the non stationarity of the markets the parameters efficiency could change drastically. For any questions/demands feel free to pm me, i would be happy to help you
Pine Script® göstergesi
alexgrover tarafından
6
Short Selling BITMEX Alts (15min scalp strategy)So this is a strategy i made for trading BITMEX alts on 15minute timeframe. Works simply. You get sell signal when it is considered overbought and way too far from its mean -> the moving average. So you short it with that moving average as the target. Sometimes it goes lower, since the sell signal represents resistance area and average represents support and they act accordingly. Might break through, might bounce back to entry. So its safer to exit at support then pray on breakdown, its 15min strategy afterall. There is no defined stop loss on this strategy. When i trade it i take risk/reward setup and my stop is calculated based on reward from entry to target. Usually its 1R or above that,usually i use price action for that purpose. if you trade it manually you have advantage, since signal gets confirmed on candle close, yet it could appear as soon as candle opens. So if you dont want any additional risks - wait for candle close and short it. If you want to gamble it - enter and average it up as it goes until you meet your risk limit. Here is how it is inteded to be traded. This strategy does not account for limit fees on bitmex, so it wouldnt be much practical to entry AND exit with market orders. As you can see in example, simple 1.5% move would lose 1/3 of its reward if you used market entry+exit. This one works on : TRX EOS LTC BCH ADA All 15 minute timeframes. Plus it showes really good results in spot exachnges too, if you want to use as a tool to exit spot exposure (binance chart, same symbols). Contact for free trial here or at twitter.com (i post full perfomance on all pairs there) Also check this strategies performance on BCHH contract on bitmex. Absolute banger.
Pine Script® stratejisi
five_min_cahrts tarafından
Oscillator Strategy for Scalping (BITMEX Swaps btc + eth)This is short selling strategy for BITMEX's XBTUSD and ETHUSD swaps scalping. Made specifically for 3M XBTUSD and 3M-5M ETHUSD timeframe trading. Not gonna open all the details, but it works mostly on bear divergences and moving averages. On premium it shows 10000 bars back on 3minute timeframe and over that period(3 weeks aprox) XBTUSD had 28 trades and ETHUSD had 25(+17 on 5M timeframe) trades with that strategy. How to trade it and setups that i use for manual trading: 1: You can use it to confirm your bias. Sell signal appears + price tries to retake previous resistance = most likely it will fail. 2. Sell signal after wick up suggests that you are likely to get filled at the top. Your main target should be this moving average. Basically sell signal appears at resistance/near one and moving average represents current line of support. So when you enter short you should be eyeing this MA as your exit/target. Yes, there is a good possibility that support wount hold and this is a bear market we talking about BUT it is 3M bot oriented trading strategy, dont forget about and dont hold for too long to find yourself with price lending on MA and jumping from it. This strategy does not have a defined stop, rather it suggests you to calculate it based on entry (provided) and target (provided). Here is what i usually do to calculate my risks. My reward is a move to line of support, my stop is usually 1R, winrate is much higher than 50% so i feel good about it. Entry either at sell signal or at wick. Wicks not always get runned, but they provide incredible r/r setups. Free trial for 36 hours for this one.
Pine Script® stratejisi
five_min_cahrts tarafından
3
CCI Highlighted & Divergence Signals [CryptoProSignal]>> This is the updated version of my previous ' CCI Highlighted ' indicator/oscillator (checkout in my previous published scripts) . > > Whats new : > This version of CCI highlighted has integrated divergence signals to spot various divergences on any timeframe which ultimately saves your time rather than spotting divergences by manual analysis. Thus making it CCI Highlighted & Divergence Signals indicator/oscillator. > By default it is optimised to give you divergence signal whenever CCI Length1 is above 100 or below -100 but you can always enable all divergences in setting/format by simple check/uncheck. > Tag reference in indicator/oscillator : * Tag "R" refers to Regular divergence. * Tag "H" refers to Hidden divergence. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- ***Below is the description copy pasted from my previous version of CCI Highlighted for remaining functionality of this updated indicator/oscillator.*** >> This script is purely based on Commodity Channel Index ( CCI ) with multiple CCI instances being used within one oscillator. >> User can use as much as 5 CCI instances/plot within one oscillator. > How to use : 1. When Bullish : Whenever CCI length 14 crosses above -100(negative 100) that means bullish momentum is supported. Best bullish/long entry would be when CCI length 14 crosses above -100(negative 100) as mentioned above and at the same time CCI length 200 is bouncing on top of +100(positive 100). 2. When Bearish : Whenever CCI length 14 crosses below +100(positive 100) that means bearish momentum is supported . Best bearish/short entry would be when CCI length 14 crosses below +100(positive 100) as mentioned above and at the same time CCI length 200 is bouncing at bottom of -100(negative 100) . > Color Clarity : a. Bullish support is highlighted GREEN and bearish support is highlighted RED within the oscillator background with respect to Length 1 (i.e 14 by default) . b. PURPLE is highhighted when Length 5(i.e 200 by default) is bouncing either on top of +100(for bullish ) or at bottom of -100(for bearish ). c. AQUA is highlighted when Length 3(i.e 50 by default) is bouncing on top or at bottom of 0 from either side respectively. d. Best entry in both cases i.e bullish or bearish as mentioned above('How to use') is highlighted WHITE by default. > Tip: Just observe the color outputs on any timeframe in a chart as it works fractally on every timeframe , it will help you understand better with clarity. > You are always free to experiment with the CCI lengths, change highlighted color and hide/unhide the Lengths as per your requirements in setting/format .
Pine Script® göstergesi
CryptoProSignal tarafından
1
Trader Set - MTF Reversal Bar SignalsThis is Multi Tile Frame signalling of reversal bar strategy. Using this, you can easily Identify if you had a reversal bar signal in 1,2,3,4,5,10,15, and 30 minute based renko charts. The more time frames get in sync with each other, the higher possibility for a more powerful signal. The least you would need is for 1,2 and 3 minutes to have 2 out of 3 of them showing same signal. Please don't ask for getting access, the licensing will be available for purchase soon in the website and I will announce it in the comment section.
Pine Script® göstergesi
CAB_Member tarafından
1
Eds Bot Signaler on Basis of RSI Stoch StochRSIEDS AWESOME BOT SIGNALER Specially for use with e.g. 3commas or autoview But can also be used just in normal manual (visual) mode This Script is very early Beta. Works for visual manual use.... and also for 3Commas Bot as "Signaler" (how to connect with Bot, see the docu on 3commas). ... but can use as Signaler for any Bot who is able to get Tradingview sms-mails. (e.g. autoview) It combines RSI, Stoch and Stoch-RSI. You can choose normal RSI, or " returning RSI " (signals when leaving the sell/buy-zone. much higher profits with this) You can choose how many of the indicators are needed to "fire". You can choose if one of the indicators is a "must" For Stoch & Stoch-RSI you can Choose sma or ema calculations of the moving average. All the Values speak for themselves, if you are used to technical analyses (stay away in the moment, if you dont know, what rsi, stoch etc is used. The Signals are also shown in the chart, the single ones, but also the combined which fires the Bot-Signal (shown as green and red column-candle at bottom) Enjoy !! Free use in the moment. More detailled Explanation in the future. Just play around! If you wanna give something back: BTC: 15buigKjh4JYnuVwcEWiYMpYvP3Lbp4ypL
Pine Script® göstergesi
edilit49 tarafından
7
Renko Strategy Open_CloseSimple Renko strategy, very profitable. Thanks to vacalo69 for the idea. Rules when the strategy opens order at market as follows: - Buy when previous brick (-1) was bearish and previous brick (-2) was bearish too and actual brick close is bullish - Sell when previous brick (-1) was bullish and previous brick (-2) was bullish too and actual brick close is bearish Rules when the strategy send stop order are the same but this time a stop buy or stop sell is placed (better overall results). Note that strategy open an order only after that condition is met, at the beginning of next candle, so the actual close is not the actual price. Only input is the brick size multiplier for stop loss and take profit: SL and TP are placed at (brick size)x(multiplier) Or put it very high if you want startegy to close order on opposite signal. Adjust brick size considering: - Strategy works well if there are three or more consecutive bricks of same "color" - Expected Profit - Drawdown - Time on trade This strategy uses Renko charts with TRADITIONAL bricks, so no repaint. Study with alerts, MT4 expert advisor and jforex automatic strategy are available at request. Please use comment section for any feedback.
Pine Script® stratejisi
03.freeman tarafından
38
NTOP - Trend OverlayNTOP is a collection of trend-following tools show short and long term trends. Since NTOP is the antithesis of VFAP, all the components are based on trend and and complement each other to give a full picture. NTOP produces signals that give both entries and exits on any timeframe. Options to configure are showing/hiding which signals you prefer and OB/OS sensitivity; there are no adjustments that need to be made as this indicator is made to be as simple as possible. Signal Line: long term, good for determining if a winning position should be exited if it's going in the wrong direction Ribbon: short/medium/long term, great for entering and adding to position Bull/Bear Signals in the form of text: specific price points where the trend is overextended or confirmed Bar Coloring: Two main colors, blue and red, to visualize trend, with a dark color to show interim price movements that may retrace A list of my indicators and pricing: medium.com 1 minute: 30 minute: Daily: Monthly:
Pine Script® göstergesi
NeoButane tarafından
8
VW-MACDHello traders! I am reading "Investing with Volume Analysis: Identify, Follow, and Profit from Trends" by Buff Pelz Dormeier so I am going to implement all indicators that are considered there. VW-MACD was developed by Buff Pelz Dormeier in 2000 and is based on the difference between a short-term volume-weighted moving average and a long-term volume-weighted moving average. The signal line is traditionally left as an exponential moving average. Like and follow for more cool indicators! Happy Trading!
Pine Script® göstergesi
everget tarafından
3
Trader Set - Signal HelperThis is a signalling helper indicator that combines parts of signalling sections of my methodology. Using the provided two parts, it's easy to identify good signals from false ones. This helper indicator is developed just to make the trader's life easier to identify if there is a possible signal or not, if there is a signal, he/she would need to check other filters and sections of my methodology for approval of a possible trade. Please don't contact me for access to the script. It'll will only be available for my students. Right now the English part of the website and learning material is under development, as soon as they are ready, I will announce it under each related script for those who are interested for participating in courses.
Pine Script® göstergesi
CAB_Member tarafından
6
Market MoverIntroducing the Market Mover Indicator, this indicator provides the trader with a buy and sell signal. The indicator is a basic oscillator that moves just like a stock. This indicator is unlike all the rest because it is not subject to noise and produces LESS false signals. This indicator truly shows the proper time to buy and sell a stock. Like most indicators if the time frame is as large as possible the indicator is more likely to be correct. Obviously there is no set way with using the indicator, every trader should make it there own. BUY SIGNALS When the indicator turns green, that is a buy signal. At this time, the stock is showing internal factors that are pointing to a reversal. The closer the indicator is to -1 or lower, the stronger the signal is. This means the more likely the stock is going to change directions. NOTE: The larger the time frame the stronger the reading. This can lead to a larger move that will take more time. Readings on smaller time frames (1 minute) can lead to false readings. SELL SIGNALS When the indicator turns red, that is a sell signal (or short signal). At this time, the stock is showing internal factors that are pointing to a reversal or pull back. The closer the indicator is to 1 or higher, the stronger the signal is. This means the more likely the stock is going to change directions. NOTE: The larger the time frame the stronger the reading. This can lead to a larger move that will take more time. Readings on smaller time frames (1 minute) can lead to false readings. If you are interested in using contact marketmovesmatt@gmail.com!
Pine Script® göstergesi
marketmoves tarafından
33