Şimdi başlat

Dönemler

TSLA Cycle Timing - 122-Day Reversal Map (Adaptive Framework)This indicator is a timing map built specifically for Tesla (TSLA) on the Daily chart. It plots a repeating set of vertical, color-coded timing markers inside a 122-bar cycle (commonly treated as ~122 trading days on the Daily timeframe). These markers highlight reversal “zones”—areas where TSLA has historically shown a tendency to pivot from high-to-low and low-to-high within the cycle. The script includes: 23 TSLA-derived set points (Points 1–23): the core timing map used to mark the most repeatable reversal areas. Two optional “Inversion Points” (INV A / INV B): manual markers you can enable when TSLA’s high/low sequence appears to flip due to a structural deviation. One additional optional marker (OPT C) for user customization. This is not an auto-buy/sell system. It is a cycle-structure framework designed to help you anticipate when a reversal is more likely to occur, so you can combine it with your own confirmation tools (price action, trend context, support/resistance, volume, etc.). Definitions (How this script interprets highs/lows) In the context of cycle mapping: A High Point is the highest price reached between two neighboring high pivots. A Low Point is the lowest price reached between two neighboring low pivots. The vertical lines are timing markers, not “guaranteed pivot candles.” Price may top/bottom slightly before or after a line. That’s why the script includes an optional ± window (in bars) to visualize a small tolerance zone around each marker. How it works (Conceptually) The script defines a repeating cycle length (default 122 bars). Inside each cycle, each point has an offset measured in bars from the cycle start. For every cycle instance (past, current, and optional future cycles), the script draws: a vertical dotted line at each enabled point offset optional ± window bands around the line optional labels (numbers for set points and “INV” labels for inversion points) Because this is a Tesla-specific map, the default offsets for Points 1–23 are preconfigured based on TSLA’s observed structure, and the remaining optional points are user-controlled. How to Use (Important) 1) Use the Daily chart first This model is designed around TSLA’s Daily cycle behavior. Start with: Symbol: TSLA Timeframe: 1D If you use other timeframes, the cycle “tempo” can change and may require different offsets. 2) Identify the cycle start (anchor) Cycle mapping depends on where the current cycle is anchored. Use “Bars Back to Current Cycle Start” to shift the cycle start so that the script’s point sequence aligns with your most recent known cycle beginning. Once aligned, the points should repeat near each 122-bar interval. 3) Read the vertical markers as reversal zones The colored vertical lines represent areas where reversals have historically occurred, not a promise that price must reverse exactly on the line. A practical approach: Use the marker as a “heads-up” zone Wait for confirmation (trend break, candle structure, momentum shift, key level reaction, etc.) 4) Understand “set points” vs “Inversion Points” Set Points (1–23) These are the primary TSLA reversal zones that tend to recur within the 122-bar structure. Specific numbered points often appear near the same relative position inside each cycle. Inversion Points (INV A / INV B) Occasionally, TSLA’s cycle behavior can flip—meaning the expected high-to-low (or low-to-high) progression temporarily swaps order. This is what I refer to as an inversion. When you see a cycle behaving “backwards” relative to the usual sequence: Enable INV A and/or INV B Place their offsets at the bar locations where the flip becomes obvious Use these markers as manual annotations so your cycle notes stay consistent even when TSLA deviates from its typical rhythm These inversion markers do not force the script to predict a flip—they allow you to document it cleanly. 5) Use the ± Window Bands to manage real-world variance Markets don’t pivot on perfect timestamps. If a reversal tends to happen “around” a point: Enable ± Window Bands Set Window ± Bars (commonly 1–3 bars on 1D) This gives a realistic visual tolerance zone around each timing marker. Settings Guide (Practical) Cycle Length (bars): 122 (TSLA Daily baseline) Lookback Bars: increase to study more history, decrease for performance Future Cycles: use sparingly; future markers are guidance zones, not guarantees Past Cycles: Lines Only: recommended ON for stable performance Labels at Top: helps keep the chart clean and readable Final Notes / Limitations This is a historical timing framework designed to map TSLA’s repeating reversal structure. It helps estimate when reversal pressure tends to appear, but it does not replace risk management or confirmation. Cycle behavior can stretch, compress, or invert during unusual volatility regimes—hence the inclusion of optional inversion markers.
Pine Script® göstergesi
Dinjin tarafından
StO Price Action - Luminous Daily RoadmapShort Summary - Luminous Daily Roadmap (LDR) are special trading days - Marks entire trading days using background coloring - Creates a clear daily roadmap directly on the chart - Designed to stay minimal and non-intrusive Full Description Overview - LDR is a proprietary forex trading schedule - Dates of major trend reversals or significant market continuations - Highlights full trading days using background colors - Improves visual structure and day-to-day orientation - Focuses purely on time segmentation, not price signals - Suitable for all markets and timeframes Daily Marking Logic - Each trading day is visually marked across all its bars - Background coloring spans the full session of the day - Works consistently across intraday and higher timeframes Year Look Back (YLB) - YLB defines the starting year for day marking - Markings are only applied from the selected year onward - Allows focused analysis on recent or specific years Visualization - Background color is fully customizable - Uses high transparency to avoid hiding price action Usage - Useful for session-based and daily analysis - Supports routine-based trading and journaling - Enhances visual rhythm of the chart Notes - This indicator is purely visual and non-predictive - No alerts or signals are generated - Best used as a structural overlay for orientation - Can be combined with any price action or indicator-based workflow
Pine Script® göstergesi
sto_svc tarafından
ICT Power of 3 identify the high-probability Power of 3 pattern by analyzing price behavior rather than just specific times of day. It focuses on how the market builds, traps, and then expands. 1. Accumulation (The Setup) Logic: The script monitors volatility using the Average True Range (ATR). When volatility drops below its recent average, the script recognizes that orders are being "accumulated." Visual: A Blue Dotted Box appears. This marks the equilibrium zone where buy and sell side liquidity is being engineered above and below the high/low of the range. 2. Manipulation (The Trap) Logic: The script looks for a "Sweep." This is defined as price moving outside the blue accumulation box but failing to sustain that move. In the video, this is the "Judas Swing" or false breakout. Visual: A Red Diamond appears above or below the bar. This signals that the script has detected a liquidity grab—essentially, the market has "tricked" breakout traders into the wrong side of the market. 3. Distribution (The Expansion) Logic: This is identified through Displacement. The script calculates the average candle body size. When a candle appears that is significantly larger (based on your Displacement Multiplier), it confirms that "Smart Money" has entered the market. Visual: A Green Triangle appears. This marks the start of the distribution phase, which is the "meat" of the move where you want to be positioned.
Pine Script® göstergesi
day_trade_mind tarafından
Value Area PRO (TPO/Volume Session VAH/VAL/POC) 📌 AP Capital Value Area PRO (TPO / Volume) AP Capital Value Area PRO is a session-based value area indicator designed for Gold (XAUUSD), NASDAQ (NAS100), and other CFD instruments. It focuses on where the market has accepted price during the current session and highlights high-probability interaction zones used by professional traders. Unlike rolling lookback volume profiles, this indicator builds a true session value area and provides actionable signals around VAH, VAL, and POC. 🔹 Core Features Session-Anchored Value Area Value Area is built only during the selected session Resets cleanly at session start Levels develop during the session and can be extended forward No repainting or shifting due to lookback changes TPO or Volume Mode TPO (Time-at-Price) mode – ideal for CFDs and tick-volume data Volume mode – uses broker volume if preferred Same logic, different weighting method Fixed Price Bin Size Uses a fixed bin size (e.g. 0.10 for Gold, 0.25–0.50 for NAS100) Produces cleaner, more realistic VAH/VAL levels Avoids distorted profiles caused by dynamic bin scaling VAH / VAL / POC Levels VAH (Value Area High) VAL (Value Area Low) POC (Point of Control) (optional) Lines can be extended to act as forward reference levels 🔹 Trading Signals & Alerts Value Re-Entry Identifies false breakouts where price: Trades outside value Then closes back inside Often seen before strong mean-reversion or continuation moves. Acceptance Detects initiative activity using: Multiple consecutive closes outside value Filters out weak single-candle breaks Rejection Flags strong rejection candles: Large candle body Wick outside value Close back inside the value area These conditions are especially effective on Gold intraday. 🔹 Optional Profile Histogram Right-side volume/TPO histogram Buy/sell imbalance visualization Fully optional to reduce chart clutter and improve performance 🔹 Best Use Cases Recommended markets XAUUSD (Gold) NAS100 / US100 Other index or metal CFDs Recommended timeframes 5m, 15m, 30m Suggested settings Mode: TPO Value Area: 70% Bin size: Gold: 0.10 NAS100: 0.25 or 0.50 🔹 How Traders Use It Trade rejections at VAH / VAL Look for acceptance to confirm trend days Use re-entries to fade failed breakouts Combine with trend filters, EMA structure, or session context ⚠️ Disclaimer This indicator is provided for educational and analytical purposes only and does not constitute financial advice. Always manage risk appropriately.
Pine Script® göstergesi
APCapitalTrading tarafından
Week High/LowThis indicator plots the Previous Week High and Low as two horizontal dashed lines. It is designed to appear only on the Daily (D) and Weekly (W) timeframes, ensuring a clean higher-timeframe context without lower-timeframe noise. The levels are calculated from the completed weekly candle and automatically update at the start of each new week. These levels serve as weekly liquidity references, commonly used to assess premium/discount zones, potential stop-run areas, and higher-timeframe market reactions.
Pine Script® göstergesi
bacle8899 tarafından
YALGOS - Watermark What does the indicator do? The YALGOS - Watermark is a comprehensive visual dashboard that consolidates essential market data onto a single floating table on your chart. It tracks real-time metrics including volatility (ATR), Market Capitalization, daily percentage change, and Relative Volume (RVol). Additionally, it provides a countdown to upcoming earnings reports and identifies the specific sector and industry of the asset. Why is it needed? Centralized Information: It eliminates the need to toggle between different tabs or windows by providing a "birds-eye view" of both technical and fundamental data directly on the price action. Risk Awareness: Through color-coded ATR logic, it alerts traders to abnormal volatility levels, helping them decide if a setup is too risky or within normal parameters. Operational Efficiency: It ensures critical catalysts, such as earnings dates, are always visible, preventing costly mistakes. The built-in "Mobile Mode" also ensures that traders on the go have a clear, optimized view of their data.
Pine Script® göstergesi
YS49 tarafından
Pre-Market Levels Monitor - CandleClub (20 Stocks)Monitor 20 stocks simultaneously with automatic breakout/breakdown alerts based on pre-market and previous day levels. What It Does This indicator tracks four critical price levels for up to 20 stocks in a single dashboard: - PMH (Pre-Market High) - Highest price from 4:00 AM - 9:30 AM ET - PML (Pre-Market Low) - Lowest price from 4:00 AM - 9:30 AM ET - PDH (Previous Day High) - Previous trading day's high - PDL (Previous Day Low) - Previous trading day's low Key Features ✅ Real-time Dashboard - All 20 stocks displayed in a color-coded table - Green cells = Price above level (bullish) - Red cells = Price below level (bearish) - Gray cells = Level not yet broken ✅ Smart Alerts - Automatic notifications when stocks break key levels - Bullish Breakout: Price breaks BOTH PMH and PDH - Bearish Breakdown: Price breaks BOTH PML and PDL - Maximum 2 alerts per direction per stock per day (prevents spam) ✅ Zero Manual Work - Set it and forget it - Levels auto-update daily at 4:00 AM ET - Works during pre-market, regular hours, and displays data on weekends - Edge detection ensures alerts fire only once per break ✅ Fully Customizable - Choose any 20 US stocks - Adjustable table position and size - Sort by total alerts, bullish alerts, or bearish alerts - Customize session times if needed How To Use 1. IMPORTANT: Use on a 1-minute chart (required for data batching) 2. Enable "Extended Hours" in chart settings to see pre-market data 3. Configure your 20 ticker symbols in indicator settings 4. Set up TradingView alerts for notifications Perfect For - Pre-market traders monitoring multiple stocks - Day traders tracking breakout opportunities - Swing traders watching key support/resistance levels - Anyone who wants automated multi-stock level monitoring Technical Details - Pine Script v6 - Latest version for optimal performance - Optimized batching - Stays under TradingView's API call limits - 20-stock maximum - Due to request.security() call restrictions (20 stocks × 2 calls = 40 limit) - TradingView Standard plan or higher required Alert Examples "Alert: AAPL Bullish Breakout - Break #1 PMH: $183.25 (broken) PDH: $181.50 (broken) Current: $183.75 Time: 10:23:15" Default Stocks Included Technology: AAPL, MSFT, GOOGL, AMZN, META, NVDA, TSLA, NFLX, AMD, INTC Finance: JPM, BAC, WFC, GS, MS, C Healthcare: JNJ, UNH, PFE, ABBV, MRK, TMO Consumer: WMT, HD, MCD (All symbols are fully customizable) Settings Overview - Symbols (1-20): Configure your watchlist - Session Times: Adjust pre-market/RTH times (Eastern Time) - Display Options: Table position, cell size, text size, sorting - Time Zone: All times in Eastern Time (auto-converts to your local time) Notes - Alerts limited to 2 per direction per stock to prevent notification spam - Use 1-minute chart required (batching system needs consecutive bars) - Enable Extended Hours to capture pre-market data - Maximum 80 alerts per day possible (20 stocks × 4 alerts max) Version 1.0 - Initial Release (January 2026) --- Created by Gautham Kanaparthy This indicator is for educational purposes only and does not constitute financial advice. Trading involves risk.
Pine Script® göstergesi
gkanaparthy tarafından
Obsidians Gold RevengeMany traders (including institutional desks) track lunar cycles on Gold (XAUUSD) because of the psychological impact on market sentiment. The common theory—often attributed to methods like Gann analysis—is: ​🌑 New Moon: Often correlates with Market Bottoms (Buy Signals) or "New Beginnings." ​🌕 Full Moon: Often correlates with Market Tops (Sell Signals) or "Exhaustion." ​Here is a script that mathematically calculates the Moon Phase based on the lunar synodic month (approx. 29.53 days). It will plot these events on your chart so you can visually backtest if Gold respects these cycles. How to use this for testing ​Add it to your Chart: Apply it to the XAUUSD (Gold) chart. ​Timeframe: This works best on 4-Hour (4H) or Daily (1D) charts. (On 15m charts, the moon phase covers many candles, so the label will appear on the specific candle where the phase officially "switched"). ​What to look for: ​Look at the Dark Blue (New Moon) areas. Did price form a bottom or start a rally there? ​Look at the Yellow (Full Moon) areas. Did price peak and reverse downward there? ​Note: Lunar cycles are considered a "timing tool" rather than a directional indicator. They often indicate when a reversal might happen, but you should combine this with your Institutional Candle zones to confirm the direction!
Pine Script® göstergesi
LilyObsidianArc tarafından
NQ ICT NY Session ChecklistNQ ICT NY Session Checklist A manual, on-chart checklist indicator designed to enforce ICT execution rules during the New York session on Nasdaq (NQ). The script displays a step-by-step confirmation panel for higher-timeframe bias, liquidity identification, liquidity sweep, market structure shift, fair value gap entry, and risk/reward validation. It helps prevent early entries, FOMO, and overtrading by clearly indicating when all conditions are met and the trader is ready to execute.
Pine Script® göstergesi
Debra527 tarafından
Script Title: FX Exchange Simulator: Two Investors (Gain vs. LosDescriptionOverviewThis educational tool is designed to help traders and beginners understand the mechanics of currency exchange rates in the EUR/USD pair. It simulates two distinct investor scenarios based on the highest and lowest prices over a user-defined period (default: 100 bars).The Two ScenariosThe script compares how the direction of exchange and the timing of the trade impact final purchasing power:Investor 1 (Starting with USD - The Strategic Entry):At the Low: Converts $1,000 USD into EUR by dividing the amount by the exchange rate.At the High: Converts those EUR back into USD by multiplying.Result: Demonstrates how buying a currency when it is "cheap" (at the low) increases your total capital in dollars.Investor 2 (Starting with EUR - The Timing Error):At the Low: Panics and converts 1,000€ into USD by multiplying.At the High: Tries to recover the 1,000€ by dividing the USD back at a higher rate.Result: Demonstrates how selling a currency when it is "cheap" and buying it back when it is "expensive" leads to a significant loss of purchasing power.FeaturesDynamic Historical Analysis: Automatically finds the highest and lowest points within the selected lookback period.Step-by-Step Calculation Table: A clean, top-centered table showing the initial amount, the exchange process, the final total, and the ROI (Return on Investment) percentage.Visual Annotations: Labels on the chart pinpoint exactly where the "Minimum" and "Maximum" occurred to provide visual context for the trade simulation.Fully Customizable: Users can adjust the initial capital amount and the lookback period via the settings menu.Mathematics Behind the ScriptThe script uses the following formulas for the calculations:Profit Scenario (USD to EUR):$$\text{Total USD} = \left( \frac{\text{Initial USD}}{\text{Price}_{min}} \right) \times \text{Price}_{max}$$Loss Scenario (EUR to USD):$$\text{Total EUR} = \left( \text{Initial EUR} \times \text{Price}_{min} \right) / \text{Price}_{max}$$InstructionsAdd the script to your chart (best used on EUR/USD).Look at the labels to see where the period extremes are.Check the table at the top to see the financial outcome of both investors.Use the "Settings" to change the initial amount or the bar period to test different market cycles.DisclaimerThis script is for educational purposes only. It is intended to illustrate currency exchange mechanics and does not constitute financial advice.
Pine Script® göstergesi
azinc tarafından
Gold Futures Prop-Firm Strategy (GC) 1-18-2026Overview This is a long-only, session-based, multi-regime trading strategy designed specifically for Gold futures (GC / GC1!) on intraday timeframes (typically 5–15 minutes). The strategy aims to capture high-probability moves during the New York and Asian sessions while avoiding major economic news events and enforcing strict daily risk limits — making it suitable for prop firm challenges (e.g. FTMO, FundedNext, Apex, etc.) that require consistent profitability, limited drawdown, and disciplined risk management. Core Philosophy Trade longs only (shorts were removed after analysis showed they were consistently unprofitable) Different logic depending on session and market regime (trending vs ranging) Heavy filtering using trend strength (ADX), volume confirmation, EMA alignment, Bollinger Bands, and RSI Strict position sizing, daily loss cap, per-session trade limits, and news blackout periods Trailing stop mechanism to let winners run while protecting against reversals Trading Sessions & Time Windows (Eastern Time) NY Session: 08:30 – 15:00 ET NY AM (trend/breakout zone): 08:30 – 11:30 ET NY PM (mean-reversion zone): 11:30 – 15:00 ET Asia Session (mean-reversion zone): 18:00 – 02:00 ET News blackouts: short windows around high-impact releases (CPI/NFP, ISM/Fed, FOMC) Entry Logic (Long Only) NY AM – Trend Following & Breakouts (strongest trend filter) ADX > 30 (strong trend) Price above 200 EMA (bull regime) Fast EMA (21) crosses above Slow EMA (55) or breakout above 20-bar high Volume spike (> 1.4 × 20-period SMA) Max 2 trades per NY session per day NY PM & Asia – Mean Reversion ADX ≤ 30 (ranging market) Price below lower Bollinger Band (20, 2.0) RSI < 25 (deep oversold) No volume filter required here Max 2 trades per Asia session per day Risk Management Rules Position size: Fixed 1–2 contracts (user selectable) Initial stop: 1.7 × ATR(14) below entry (tightened from original) Trailing stop: Activates after price moves +1.0 × ATR in profit Trails by 1.0 × ATR (locked-in profits aggressively) Daily loss limit: -$600 (stops all trading for the day once hit) No trading during defined news windows Pyramiding disabled (only one position at a time) No short entries (removed after backtest analysis) Indicators Used EMA 21 / 55 / 200 (trend direction & filter) ATR(14) × 0.85 (volatility base) ADX(14) threshold 30 (strong trend confirmation) Bollinger Bands (20, 2.0) for mean-reversion entries RSI(14) with oversold < 25 Volume spike filter (1.4× SMA) for trend/breakout entries 20-bar highest high / lowest low for breakout detection Visual Elements on Chart Fast (blue), Slow (orange), and Filter (red) EMAs Bollinger Bands (gray, semi-transparent fill) Background coloring: Red tint during news blackout periods Purple tint when daily loss limit is hit Intended Use Case Prop trading firm evaluation accounts Conservative intraday gold trading Focus on high-quality long setups in trending (NY AM) and mean-reverting (Asia/PM) environments Goal: positive expectancy with controlled drawdown, suitable for passing drawdown and profit targets
Pine Script® stratejisi
mattkelly914 tarafından
Gann Octogram - Sacred Geometry Confluence Ver 1.0📐 Gann Octogram - Sacred Geometry Confluence Ver 1.0 Overview Advanced Gann analysis tool combining W.D. Gann's Square of Nine principles with sacred geometry and multi-factor confluence signals. This indicator automatically detects swing highs/lows and projects octogram grids forward in time and price, identifying high-probability trading opportunities where multiple factors align. Understanding Gann Octograms W.D. Gann believed markets move in geometric patterns through time and price. The octogram (8-sided figure) represents the square of nine principle where: Price divisions (1/8ths) create natural support/resistance Time cycles mark potential reversal points Diagonal angles show dynamic price-time relationships Confluence zones where geometry aligns offer highest probability trades This indicator makes these complex calculations automatic and visual. Key Features 🎯 Intelligent Auto-Detection Auto Gann Number Selection: Automatically chooses optimal Gann period (11, 22, 44, 88, 176) based on timeframe and data availability Adaptive Half-Period Mode: Uses Gann/2 for faster swing detection while validating with full period Smart Grid Projection: Projects octagrams near current price action for relevance 📊 Sacred Geometry Visualization Octogram Grids: Complete octagonal geometry with inner square, angled square, and connecting lines Gann Angles: 1×1 and 2×1 diagonal support/resistance angles Time Cycles: Quarter, half, and three-quarter cycle markers Price Levels: Automatic 1/8th division levels (0%, 12.5%, 25%, 37.5%, 50%, 62.5%, 75%, 87.5%, 100%) ⚡ Advanced Confluence System Adjustable 4-Factor Confluence (Levels 0-4): Price Level Touch: Precise detection of key support/resistance levels Time Cycle Alignment: Major (25%, 50%, 75%) and minor (1/8th divisions) cycles Octogram Geometry: Proximity to vertices and diagonal angles Price Action: Bullish/bearish candle confirmation Confluence Levels: Level 0: Signals on price touch only (most signals) Level 1: Minimum 1 factor required Level 2: Minimum 2 factors (⭐ recommended - balanced) Level 3: Minimum 3 factors (strict quality) Level 4: All 4 factors required (highest quality, fewer signals) 🛡️ Signal Quality Controls Max Signals Per Cell: Limit signals to 1-10 per grid cell Cooldown Period: Minimum bars between consecutive signals Cell Signal Tracking: Automatic reset when entering new time cells Adjustable Tolerances: Fine-tune price and geometry sensitivity How It Works Swing Detection: Identifies significant market swings using pivot highs/lows Grid Construction: Builds octogram grid from swing high to swing low Multi-Grid Projection: Projects multiple cells forward (time) and vertically (price) Confluence Analysis: Monitors all 4 factors continuously Signal Generation: Fires BUY/SELL when confluence threshold is met BUY Signals trigger when: Price touches LOW zones (0%-50%) At key time cycle points Near octogram geometry Bullish candle forms SELL Signals trigger when: Price touches HIGH zones (50%-100%) At key time cycle points Near octogram geometry Bearish candle forms Settings Guide Structure Settings Auto Gann Number: Enable for automatic period selection (recommended) Manual Gann Number: 11, 22, 44, 88, or 176 bars Use Half Period: Faster detection using Gann/2 lookback Grid Stability: Adaptive (1/8th) / Strict (1/4th) / Relaxed (1/16th) Signal Settings ⚙️ Confluence Level: 0-4 (start with 2) Price Tolerance: 1-8% (default 3%) Geometry Tolerance: 0.5-5% (default 2.5%) Min Bars Between Signals: 1-20 (default 3) Max Signals Per Cell: 1-10 (default 4-6) Display Options Toggle grid squares, octagrams, triangles, Gann angles Customizable colors for all elements Time cycle visualization Swing high/low markers Info panel with swing statistics Best Practices For Day Trading (5min-15min charts): Confluence Level: 2 Auto Gann: ON Grid Stability: Adaptive Max Signals Per Cell: 4-6 For Swing Trading (1H-4H charts): Confluence Level: 3 Auto Gann: ON Grid Stability: Strict Max Signals Per Cell: 2-4 For Position Trading (Daily charts): Confluence Level: 3-4 Manual Gann: 88 or 176 Grid Stability: Strict Max Signals Per Cell: 2-3 Alert Setup Built-in alert conditions: Gann Octogram Buy - Fires on BUY signal Gann Octogram Sell - Fires on SELL signal Configure alerts using TradingView's alert system to get notified when confluence zones trigger. Backtesting Tips Start with Confluence Level 2 (balanced approach) Increase level to 3-4 if too many signals Decrease to 1 if missing opportunities Adjust tolerances based on asset volatility Test different Gann numbers for your specific market Credits & Theory Based on W.D. Gann's principles: Square of Nine Time-Price Geometry Sacred Geometry (Octograms) Natural Market Cycles Developed with modern Pine Script for reliability, efficiency, and user control. Version History Ver 1.0 - Initial Release 4-factor confluence system Auto Gann number selection Adjustable confluence levels (0-4) Sacred geometry visualization Signal quality controls Support For questions, suggestions, or issues: Comment on this indicator Check the code (open source) Experiment with settings for your trading style Happy Trading! 📈 Disclaimer This indicator is for educational and informational purposes only. Past performance does not guarantee future results. Always practice proper risk management and never risk more than you can afford to lose. Backtest thoroughly before live trading.
Pine Script® göstergesi
TimePriceDecoder tarafından