Şimdi başlat

Grafik Desenleri

RT-Mali Pivots & STD Liquidation LevelsIntroduction The Mali Pivots indicator is a tool that is able to highlight support and resistance levels in relation to the 9,10,11,12,13 and extended Mali Counts of the trending price action. While numerous traders trade these counts, this tool is unique in that it continues counting past these base levels and will mark extended runs coming to an end with a vertical Red or Green Column. The indicator identifies levels based on both 9,10,11,12,13 and extended Mali Counts, but splits them into both Support and Resistance levels and marks each level with a horizontal pivot. The level being Support/Resistance can be determined by the colors of the pivot. In addition, note that these pivot styles and colors can be edited in the tool settings. How It Works This calculation is based on the value of the current close compared to the close that happened four candles back. MaliCount:= close > close When this condition is true for 9,10,11,12 or 13 consecutive closes in a row, the indicator will mark the candle with the current number count as well as drawing a horizontal pivot to indicate the importance of the Mali Count price levels. When a count reaches important thresholds for the Mali Count, the indicator will: Label the candle with the current Mali Count. Draw a horizontal pivot at those important Mali Count price levels. Mark extended runs with a vertical red or green column when trends keep pushing beyond the minimum Mali Counts. The result is a visual map of where prior trend Mali Counts have completed and where price has historically reacted in the past. These levels are not trade signals by themselves, but they can be used as context when planning entries, exits, and risk. Patterns of Mali Counts At the core of the Mali Pivots Indicator is a tool that counts candles of a trend. Conceptually, it: Compares the current close to the close a few candles back to determine if the trend is still pressing in the same direction. Increments an internal Mali Count as long as the trend condition continues. Resets the Mali Count when the condition fails. When the Mali Count reaches the minimum consecutive qualifying closes, the indicator marks that candle with the Mali Count number and establishes a pivot on the important price levels. Because up and down trends are tracked separately, traders can see both bullish and bearish runs and where they completed. Pivots Each completed important Mali Count leaves behind a horizontal pivot that acts as a reference level on the chart. These pivots are split into support and resistance: Bullish Mali Counts leave pivots that often behave as support when price trades back into them from above. Bearish Mali Counts leave pivots that often behave as resistance when price trades back into them from below. Pivot colors indicate whether the level is currently treated as support or resistance, and these colors can be adjusted in the settings to match the trader’s chart style. Extended Trends Ending and Exhaustion One of the unique aspects of Mali Pivots is that it continues counting beyond the typical 9,10,11,12 and 13 thresholds. When a trend keeps running and the internal Mali Count reaches extended levels, the indicator can highlight that area with a vertical red or green column. These extended markers are designed to draw attention to trend legs that have pushed well beyond the usual Mali Counts. In many cases, these zones coincide with areas where trends begin to stall, consolidate, or reverse, but they should still be treated as context rather than automatic reversal signals. Scalp Trading Zone Some traders use Mali Pivots to frame shorter term trades between nearby support and resistance pivots. On example charts, this is sometimes called a “scalp trading zone” where: Active support and resistance pivots outline a defined price range. Traders can study how price reacts inside that zone before deciding if they want to participate. This is an optional usage pattern meant for review and study. The indicator itself does not define specific scalp entry or exit rules. Settings Mali Pivots Indicator includes a focused set of settings so traders can tune its visuals to their own charts: Standard Liquidation Levels - Liquidations On/Off - Toggles the tool on and off. - Dark Mode On/Off - Allows users to use settings for light/dark backgrounds. Mali Pivots - General Settings - Pivots Toggle - Toggles the Mali Pivots on and off. - Candle Color Toggle - Toggles the Candle Marker on and off. Mali Pivots - Mali Count Settings - 9/10/11/12/13 Number Toggle - Allows traders to turn off and on specific number displays on their chart. Mali Pivots - Extended Run Exhaustion - Extended Bearish/Bullish Trend Stop Toggle - Allows traders to control which extended run markers they want displayed on their chart. Mali Pivots - Color Settings - All Color Options - Allows traders to customize the coloring of the tool to match their specific requirements. How Traders Commonly Use Mali Pivots Tracking where important Mali Counts have completed in the past and how price reacts when it revisits those levels. Using pivots and extended columns as context when combining Mali Pivots with other tools such as RT-Main Indicator, volume, or broader market structure. Reviewing historical Mali Counts in Replay mode to better understand how different assets behave around completed Mali Counts and extended runs. In all cases, the Mali Pivots Indicator is designed to highlight structure and potential exhaustion zones, while trade execution remains at the trader’s discretion. What Makes This Tool Different Mali Pivots differs from simple counting tools in a few key ways: It tracks both the standard Mali Counts and extended Mali Counts that continue beyond the normal levels. It converts Mali Count completions into horizontal pivots that can act as long lived support or resistance references. It visually distinguishes extended trends with vertical columns so unusual runs are easy to spot on the chart. Standard Liquidation Levels This indicator also includes a simple liquidation level tool that projects where potential Longs and Shorts are vulnerable to being liquidated. This tool measures the base of the volume in the displayed candles and projects the following levels: 5X Liquidation Level - Longs & Shorts 10X Liquidation Level - Longs & Shorts 25X Liquidation Level - Longs & Shorts 50X Liquidation Level - Longs & Shorts Important Note Mali Pivots and Standard Liquidation Levels are intended to provide additional context around the trend's Mali Counts, support, and resistance. It is not a standalone signal generator and should always be used together with your own analysis, testing, and risk management. Historical trends and pivot reactions do not guarantee future results. 🐋 Tight lines and happy trading!
Pine Script® göstergesi
RainbowRunner144 tarafından
ahax – CRT V0 ahax – CRT V0 is an enhanced CRT indicator that works on candlestick formations and generates BUY/SELL signals when certain conditions are met. In this version, the classic CRT logic has been supplemented with additional controls for more stable operation, with a particular focus on reducing unnecessary signals. Each signal is generated based on the middle candlestick, and confirmation signals (+/-) can be displayed, if desired, based on the close of the next candle. The indicator works based on the relationship between the left candlestick, the middle candlestick, and the right candlestick. It provides quick visual feedback on points such as trend reversals, potential manipulation, or reaction zones. It is designed to be simple, clear, and clean, allowing you to adapt it to your own strategy. It does not include any risk management or trading recommendations.
Pine Script® göstergesi
AhaX_Trader tarafından
Smart Adaptive Double Patterns [The_lurker]Smart Adaptive Double Patterns This is an advanced technical indicator that combines two of the strongest and most renowned classical price reversal patterns: ✅ Double Bottom Pattern — a bullish reversal pattern that forms after a downtrend ✅ Double Top Pattern — a bearish reversal pattern that forms after an uptrend The indicator does not merely detect patterns — it provides a fully integrated, intelligent system that includes: ✅ Precise quality scoring for each pattern using 5 technical criteria ✅ Automatic price target calculation at three levels (Conservative, Balanced, Aggressive) ✅ Multi-layer dynamic filtering to avoid false signals ✅ Live pattern tracking from formation to target achievement or failure ✅ Comprehensive alert system covering all possible trading scenarios 🎯 Why Is This Indicator Unique? 1️⃣ High Detection Accuracy Unlike traditional indicators that rely on simple rules, this one applies 5 strict structural conditions to confirm pattern validity: A clear trend must precede the pattern High symmetry between the two bottoms or two tops No break of critical price levels during formation Logical spacing between key points Technical confirmation from ADX, ATR, and Volume 2️⃣ Advanced Quality Scoring System Each pattern is scored out of 100 based on 5 weighted criteria: Symmetry (30%): How closely the two bottoms or tops match Trend Strength (20%): Strength of the prior trend Volume Behavior (20%): Trading activity at critical points Pattern Depth (15%): Vertical distance between neckline and bottom/top Structural Integrity (15%): Full compliance with structural rules 3️⃣ Smart Target Management Separate targets for bullish (Double Bottom) and bearish (Double Top) patterns Separate projections for success and failure cases Multiple options: Conservative (0.618) / Balanced (1.0) / Aggressive (1.618) Live tracking with dynamic moving lines 4️⃣ Professional Failure Handling Failed patterns are not ignored — they are turned into counter-trend opportunities: Failed Double Bottom → triggers a bearish signal with downside targets Failed Double Top → triggers a bullish signal with upside targets Automatic color change for clear visual distinction 5️⃣ Full Customization Flexibility Enable/disable each pattern independently 22+ adjustable settings Unique colors for each pattern and quality level Full bilingual support (Arabic / English) 📐 Pattern Details 🟦 Double Bottom Pattern Sequence of points: 🔹 Point 1: Peak marking the start of a strong downtrend 🔹 Point 2 (Bottom 1): First low — first key bounce 🔹 Point 3: Intermediate high — forms the neckline (resistance) 🔹 Point 4 (Bottom 2): Second low — should closely match Bottom 1 🔹 Point 5: Breakout point — pattern confirmation Mandatory Conditions: ✅ Clear downtrend before Point 2 ✅ Bottoms 2 & 4 nearly identical (≤1.5% difference by default) ✅ Point 3 higher than both bottoms ✅ Neither bottom is broken during formation ✅ Sufficient time between points (≥10 candles by default) ✅ Success Scenario → Price breaks above the neckline (Point 3) → Point 5 is plotted at breakout candle → Dashed vertical line drawn from Point 5 to target → Horizontal dashed line tracks price toward target → Dashboard shows: Pattern Type | Quality | Rating | Target | Status → When target hits: line turns green + ✅ appears 🎯 Target Calculation Pattern Height = Point 3 − Point 4 • Conservative: Point 3 + (Height × 0.618 × Quality Factor) • Balanced: Point 3 + (Height × 1.0 × Quality Factor) • Aggressive: Point 3 + (Height × 1.618 × Quality Factor) ❌ Failure Scenario → Price breaks below both Bottom 1 or Bottom 2 before neckline breakout Visual Changes: All lines turn red Red ✖ appears at breakdown candle Neckline stops expanding Red dashed vertical line from breakdown point to bearish target Red horizontal tracking line follows price Dashboard updates to: ⚠ Failed Bottom – Bearish → Shows new bearish target → Indicates target mode for failure case → Status: Bearish Reversal → Fully red display 🟥 Double Top Pattern Sequence of points: 🔹 Point 1: Trough marking the start of a strong uptrend 🔹 Point 2 (Top 1): First peak — first key resistance 🔹 Point 3: Intermediate low — forms the neckline (support) 🔹 Point 4 (Top 2): Second peak — should closely match Top 1 🔹 Point 5: Breakdown point — pattern confirmation Mandatory Conditions: ✅ Clear uptrend before Point 2 ✅ Tops 2 & 4 nearly identical (≤1.5% difference by default) ✅ Point 3 lower than both tops ✅ Neither top is breached during formation ✅ Sufficient time between points (≥10 candles by default) ✅ Success Scenario → Price breaks below the neckline (Point 3) → Point 5 is plotted at breakdown candle → Dashed vertical line drawn to target → Horizontal tracking line moves with price → Dashboard updates accordingly → Green line + ✅ on hit 🎯 Target Calculation Pattern Height = Point 4 − Point 3 • Conservative: Point 3 − (Height × 0.618 × Quality Factor) • Balanced: Point 3 − (Height × 1.0 × Quality Factor) • Aggressive: Point 3 − (Height × 1.618 × Quality Factor) ❌ Failure Scenario → Price breaks above either Top 1 or Top 2 before neckline breakdown Visual Changes: All lines turn cyan (light blue) Cyan ✖ appears at breakout candle Neckline stops expanding Cyan dashed vertical line to bullish target Cyan horizontal tracking line follows price Dashboard updates to: ⚠ Failed Top – Bullish → Shows new bullish target → Indicates target mode for failure case → Status: Bullish Reversal → Fully cyan display 🎯 Upside Target (after Double Top failure) Max Top = max(Point 2, Point 4) Height = Max Top − Point 3 • Conservative: Max Top + (Height × 0.618) • Balanced: Max Top + (Height × 1.0) • Aggressive: Max Top + (Height × 1.618) 📊 Quality Scoring System (0–100) 1️⃣ Symmetry (30%) Measures price match between the two bottoms or two tops. High score (25–30): Near-perfect symmetry → very strong pattern Medium (15–24): Good match → reliable signal Low (5–14): Weak symmetry → use caution Zero: No symmetry → invalid pattern 2️⃣ Trend Strength (20%) Uses ADX and DI indicators. 20 pts: Strong trend confirmed (e.g., ADX ≥ 20 + correct DI alignment) 10 pts: Trend filter disabled 6 pts: Weak or sideways trend 3️⃣ Volume Behavior (20%) Declining volume on second touch is a positive sign (shows exhaustion). 15–20 pts: Clear volume drop → strong signal 10 pts: Neutral volume 6 pts: Rising volume → higher risk of continuation 4️⃣ Pattern Depth (15%) Deeper patterns = stronger reversals. 12–15 pts: Deep → high reversal power 8–11 pts: Medium → acceptable <8 pts: Shallow → weak signal 5️⃣ Structural Integrity (15%) Checks logical structure (e.g., Point 1 > Point 3 in Double Bottom). 12–15 pts: Ideal structure 8–11 pts: Minor flaws <8 pts: Poor setup 📈 Final Quality Rating & Colors • 85–100 → ⭐ Excellent  → Double Bottom: Cyan #00BCD4  → Double Top: Light Red #FF5252 • 75–84 → ✨ Very Good • 65–74 → ✓ Good • 60–64 → ○ Acceptable  → All use Amber #FFC107 • <60 → ❌ Rejected (not shown)  → Gray #9E9E9E 🔧 Dynamic Filters 1️⃣ ATR Filter (Volatility Check) Rejects patterns in abnormally high volatility periods. → If current ATR > 1.8 × 50-period ATR MA → pattern rejected ✅ Recommended for crypto, small caps ❌ Optional for calm markets (gold, bonds) 2️⃣ ADX Filter (Trend Confirmation) Ensures a real trend exists before the pattern. → If ADX < 14 (70% of default 20) → pattern rejected ✅ Strongly recommended (keep ON) 3️⃣ Volume Filter (Behavior Validation) Not used to reject patterns, but strongly affects quality score. ✅ Best for liquid markets (Forex majors, large stocks) ❌ Optional for illiquid assets ⚙️ Key Settings Explained 🔘 General Settings • Language: Arabic / English • Show Previous Patterns: Yes / No  → “No” keeps chart clean; “Yes” for historical review 🔘 Pattern Selection • Enable Double Bottom: ✅ / ❌ • Enable Double Top: ✅ / ❌ → Use combinations:  ✅✅ → Full reversal scanning  ✅❌ → Long setups only  ❌✅ → Short setups only  ❌❌ → Indicator OFF 🔘 Detection Parameters • Pivots Left (1–20): Higher = more reliable, fewer patterns • Pivots Right (1–20): Lower = faster signals • Min Width (5–100): Min candles between Bottom/Top 1 & 2 • Tolerance % (0.1%–5%): Max allowed price difference • Min Arm (5–50): Min candles between pivot & neckline • Min Trend (5–50): Min candles in prior trend • Trend Lookback (50–500): How far back to detect trend start • Extension Multiplier (1.0–5.0): How long to wait for breakout 🔘 Quality Settings • Min Quality Score (0–100):  → Conservative: 75–85  → Balanced: 60–70  → Flexible: 50–55 • Custom Weights: Adjust based on market (e.g., increase Volume weight in Forex) 🔘 Target Settings • Bottom Bullish Target: Conservative / Balanced / Aggressive • Bottom Bearish Target: (used on failure) • Top Bearish Target: Conservative / Balanced / Aggressive • Top Bullish Target: (used on failure) 🔘 Visual Settings • Label Size: Small / Normal / Large / Huge • Pattern Colors: Fully customizable • Table: Show/Hide + Size (Small/Normal/Large) + Position (Top-Right / Top-Left / Bottom-Right / Bottom-Left) • Fill Transparency: 70%–95% (default: 85%) 🔔 Alert System (8 Independent Alerts) 📌 Double Bottom Alerts Bullish Breakout → “Double Bottom Breakout – Bullish!” Bullish Target Hit → “Bullish Target Achieved!” Failure (Bearish) → “Double Bottom Failed – Bearish!” Bearish Target Hit → “Bearish Target Achieved (Failure)!” 📌 Double Top Alerts Bearish Breakdown → “Double Top Breakdown – Bearish!” Bearish Target Hit → “Bearish Target Achieved!” Failure (Bullish) → “Double Top Failed – Bullish!” Bullish Target Hit → “Bullish Target Achieved (Failure)!” Each alert can be enabled/disabled independently and supports pop-ups, emails, or webhooks. ⚠️ Disclaimer: This indicator is for educational and analytical purposes only. It does not constitute financial, investment, or trading advice. Use it in conjunction with your own strategy and risk management. Neither TradingView nor the developer is liable for any financial decisions or losses.
Pine Script® göstergesi
The_lurker tarafından
5
Aamir Sniper Pro – Ultimate Trend & Zone SystemAamir Sniper Pro is a comprehensive, all-in-one trading system designed for traders who demand precision without the noise. This script combines a powerful multi-factor consensus engine with dynamic market structure analysis to provide high-probability entry signals. Unlike cluttered indicators, this system follows a "Clean Chart" philosophy. It removes unnecessary visual distractions (like candle patterns or complex shapes) and focuses strictly on what matters: Trend, Momentum, Volume, and Key Levels. Key Features: Sniper Consensus Engine: The core of the system is a sophisticated algorithm that aggregates data from multiple trend, momentum, and volatility sources. It calculates a "Consensus Score" (0-100%) to determine the strength of the market direction. Signals: Provides clear BUY and SELL signals based on this consensus, filtered to reduce false positives in choppy markets. Dynamic Support & Resistance Zones: Automatically identifies and plots high-importance Supply and Demand zones. These zones update dynamically based on pivot strength, helping you visualize where price is likely to bounce or break out. Wall Detection: The system alerts you when price is actively rejecting a zone (Double Rejection logic). Institutional Volume Analysis (PVSRA): Integrated Whale Volume Detection. The candle colors change dynamically to highlight "Climax" or "Rising" volume. Helps you spot institutional activity and confirm if a move is backed by real money. Advanced Momentum Filtering (WAE & QQE): Includes a built-in filter based on Waddah Attar Explosion (WAE) and QQE Mod logic. Ensures that signals are only taken when there is sufficient market power and volatility, keeping you out of "dead" or ranging markets. Smart Money Concepts (SMC) & Structure: Order Blocks & FVGs: Automatically highlights active Order Blocks and Fair Value Gaps (FVG) to use as targets or entry zones. Liquidity Sweeps: Identifies Buy-Side (BSL) and Sell-Side (SSL) liquidity levels. BOS (Break of Structure): Confirms trend continuation. Real-Time Data Dashboard: A compact, non-intrusive dashboard displays the current Trend Direction, Confidence Score, Volume Status, and structural warnings (like Traps or Walls) at a glance. How to Use: Step 1: Wait for a Buy or Sell Signal label. Step 2: Check the Dashboard Confidence Score (Higher is better). Step 3: Confirm with Volume (Look for colored candles indicating Whale activity). Step 4: Ensure price is not hitting a major Opposite Wall/Zone (e.g., Don't buy directly into a Resistance Zone). Step 5: Use the suggested TP/SL Lines for trade management. Note: This indicator is designed to be a complete trading assistant. It works on all timeframes but is optimized for scalping and intraday swings. Settings: Entry Mode: Choose between "Instant" (Aggressive) or "Retest" (Safe/Sniper) entries. Filters: Toggle WAE or BOS requirements on/off based on your trading style. Visuals: Fully customizable colors and dashboard positioning. Disclaimer: Use this tool to assist your analysis. Always manage your risk responsibly.
Pine Script® göstergesi
Sultan-of-Multan tarafından
1
MYPYBiTE.com – Trend MAsI wrote this simple script to track momentum and associate my personal webpage with the development projects I do as a hobby. Technical information is a powerful way to understand trends and I included the various variables I use. Please as always considering that the trend is not the only component to investing and trading and fundamental information provides a compliment to the diligence employed by any serious trader or investor.
Pine Script® göstergesi
FuriousStylez tarafından
RT-Machine Learning Reversion BandsMachine Learning Reversion Bands is a support and resistance tool designed to highlight where trends have historically reverted and where price is pushing into unusually extreme territory. It plots two sets of bands around price so traders can see both standard reversion zones and more extreme, machine learning levels that adapt and learn from the chart over time. Introduction The Machine Learning Reversion Bands tool utilizes an algorithm that learns from the chart’s full visible history. Instead of manually scanning through years of candles, the script studies the data and builds machine learning bands that respond to how the asset has actually behaved over time. This version retains the original red and green Reversion Bands and adds a second set of dynamic Machine Learning Bands that adapt to volatility. This gives the trader four levels to reference: Red and Green Reversion Bands for more traditional support and resistance reversion zones. Cyan and Orange Machine Learning Bands that adapt as new extremes form on the chart. The red and green bands are tuned for more typical reversion behavior, while the cyan and orange bands are focused on those moves where price stretches beyond its usual range. This can help frame potential entries, exits, and risk around both normal and more extreme conditions. Support Versus Resistance Machine Learning Reversion Bands tracks four main levels of support and resistance: Green and Red Bands - Standard Reversion Bands These bands mark more common reversion points for many assets. They highlight areas where trends have historically run into exhaustion and reverted back toward the mean. When price approaches these zones, it is often interacting with regions where prior swings have slowed, paused, or reversed. Cyan and Orange Bands - Machine Learning Reversion Bands The cyan and orange band algorithm studies the asset by looking back at every candle that is available on the chart (as far as the user can scroll left). If there is a decade of data, the algorithm will use that full decade to learn how the asset has behaved in the past and then project where these cyan and orange bands should be overlaid. In short, these ML bands give traders a view of where the tool estimates the more extreme extensions of a trend may be, based on historical behavior. In many cases, price will only touch the cyan and orange bands when it is moving into unusually strong or weak levels relative to its own past. Each time trends reach these orange or cyan levels, the tool updates from that price action so that its future projections continue to reflect what has already been seen. A historical example of the cyan bands adapting to extreme bullish behavior on a DOGE chart. A historical example of the cyan bands projecting resistance levels in an extremely bullish trend. A historical example of the orange bands adapting to an EOS chart. A second historical example of the orange bands adapting to a Ford chart. Example Charts The following examples show how price has interacted with the bands in specific historical periods. They are intended as illustrations of behavior, not as performance guarantees: Tron - H4 - TRXUSDT - December 2024 Nvidia - H4 - NVDA - March 2020 Tesla - H4 - TSLA - April 2022 These historical example charts can be used to visually review how price has interacted with the bands in the past. They are illustrations of behavior, not performance statistics. Settings and Tuning Reversion Alert Markers are used to visualize when price is interacting with the bands and to help traders monitor potential reversion events. When enabled, these markers plot whenever price meets the internal conditions for a reversion touch inside one of the bands. These markers can be toggled on and off in the settings of the tool. The markers can also be set to custom text/emojis per the trader's preferences: The Bands can also be adjusted manually to fine tune the chart specifically to the asset that the trader is buying/selling: Smoothness Adjuster - Adjusts how sensitive the Bands are to price action. Top Bands Height Adjuster - Adjusts the vertical height of the Upper Bands. Bottom Bands Height Adjuster - Adjusts the vertical height of the Lower Bands. The Bands themselves can also be adjusted visually to suit each trader's preference. The borders of the Reversion Bands as well as the shading of the Reversion Bands themselves can be adjusted to be brighter or darker by adjusting these two settings: Band Transparency Adjuster - Adjusts the opacity of the Reversion Bands. Border Transparency Adjuster - Adjusts the opacity/brightness of the Borders that are drawn around the Bands. Example of the Reversion Bands and the Borders being set to be extremely bright: Example of the Reversion Bands and Borders set to be more transparent: The colors of the Bands and Borders can also be adjusted to meet the preferences of the trader. Below you can see each Band color being adjusted: Candle Filtering is an advanced tuning option that traders can use to enable the Reversion Alert Markers to only trigger during extreme price action movements that are tracked using the RT-Main Indicator. Below is an example of Reversion Alert Markers operating in conjunction with the Colored Candles of the RT-Main Indicator running the default settings. By default, every candle color will trigger an Alert Marker when inside the Reversion Bands: With Candle Filtering options enabled, the trader can set their chart to only display Alert Markers for White and Pink Candles that print from the RT-Main Indicator inside the Reversion Bands: For traders that utilize custom tunes on the RT-Main Indicator, the Reversion Bands Tool also has settings that can be used to bring the Pink/White Candle Filtering in synch with custom Candle Settings of the RT-Main Indicator: Alert Automation When setting up alerts for this tool, traders generally follow these parameters: 1st Condition - Select the RT-Machine Learning Reversion Bands Indicator. 2nd Condition - Select the desired alert condition that you want to monitor: Entering Green Band | Cyan Band | Red Band | Orange Band. Interval - Select Same as Chart. Trigger - Select Once Per Bar Close. This approach allows the tool to serve as a visual and alert-based context layer for potential reversion areas, while entries, exits, and order execution remain under the trader's control. How Traders Commonly Use The Bands Some common ways traders incorporate Machine Learning Reversion Bands into their workflow include: Using the Green and Red Bands as reference points for more "typical" mean reversion areas within an ongoing trend. Watching the Cyan and Orange Bands for rare extensions that may mark areas of extreme strength or weakness relative to the asset's historical behavior. Combining Band touches with other tools such as RT-Main Indicator, pivots, or volume context to build confluence around potential trade locations. Reviewing past behavior in Replay mode to see how different assets have reacted to Band touches during various market regimes. The tool is designed to act as a support and resistance map that adapts to each asset's history, rather than a rigid rule set. What Makes This Tool Different While many indicators draw static channels or volatility bands, Machine Learning Reversion Bands are designed to: Retain the familiar behavior of the classic Red and Green Reversion Bands while adding a second Machine Learning layer. Learn from all available chart history to estimate where more extreme extensions have historically occurred in the past. Provide four distinct Band levels so traders can distinguish between normal reversion zones and more unusual extremes. Offer optional markers and alert integration so reversion interactions can be tracked without watching every candle. Important Note Machine Learning Reversion Bands are intended to provide additional context around support, resistance, and potential mean reversion zones. They are not a standalone signal generator and should always be used together with your own analysis, testing, and risk management. Historical interactions with the Bands, including any back-test style examples, do not guarantee future results. 🐋 Tight lines and happy trading!
Pine Script® göstergesi
RainbowRunner144 tarafından
2
The Consolidator [Pattern Foresight]Overview This Consolidator script uses detection logic to chart bullish and bearish consolidation markers and to chart shaded high/low price range lines (with green shading between the bottom range line and the price for bullish trends and with red shading between the top range line and the price for bearish trends). A consolidation point is telling you: “Price has gone quiet here. Expect expansion—likely a breakout—once volume returns.” Low volatility squeezes often lead to a breakout. The Consolidator attempts to identify periods where the price is moving sideways, compressing into a tighter range, forming a base or coil, or preparing for a trend continuation or reversal. Bullish Consolidation Markers - Bullish consolidation occurs when the price is coiling but buyers are in control. These are useful to help detect bull flags, ascending triangles, tight bases before breakouts. Bearish Consolidation Markers - These are useful to help detect bear flags, descending triangles, distribution periods. Why this indicator is unique The Consolidator attempts to be a predictive pattern-recognition system, not a simple channel indicator by measuring consolidation tightness and high/low price ranges. The range lines help visualize the “coil” where price is compressing. Consolidation markers classify which side of the coil price is leaning toward: bullish pressure or bearish pressure. The script attempts to detect structural bullish patterns with breakout intelligence. Usage Consolidation Lookback - Controls how many bars are examined when determining the consolidation “box.” Think of it as: “How wide of a window do you want to search for a sideways range?” Shorter lookback (10–20): Tighter, more sensitive consolidations, faster signals, more false positives, and useful for scalping and day trading. Longer lookback (30–60): Larger, more stable consolidation zones, fewer false positives, and better for swing trading. Tolerance Percent - Defines how “flat” highs/lows must be to qualify as consolidation. This is the key part of compression detection. Lower tolerance (0.3–0.6%): Only very tight ranges qualify with fewer but higher-quality consolidation zones. Higher tolerance (0.7–1.5%): wider ranges and more consolidation signals. Small changes to tolerance drastically change the number of consolidation markers (higher = more consolidation markers). Disclaimer: This script is for informational purposes only. Nothing contained herein should be construed as financial, investment, or trading advice. The author is not a financial advisor and is not providing personalized recommendations. All trading involves risk, including the potential loss of principal. The author makes no assurances of accuracy, performance, or future results. History may not reflect future performance. You are solely responsible for your own investment decisions and agree to use this script entirely at your own risk.
Pine Script® göstergesi
PatternForesight tarafından
Smart MACD Divergence ScannerOriginal Base Indicator: "CM_MacD_Ult_MTF" by ChrisMoody This indicator builds upon ChrisMoody's excellent multi-timeframe MACD foundation and transforms it into a professional divergence scanner with advanced quality assessment and filtering capabilities. The original MACD visualization and MTF functionality have been preserved while adding completely new divergence detection, scoring, and filtering systems. 🎯 What Makes This Indicator Unique: Smart MACD Divergence Scanner is a professional tool for detecting MACD-based divergences with an advanced filtering system and signal quality assessment. Unlike standard divergence indicators, this version includes innovative features: Adaptive Quality Scoring System — each signal receives a score from 0 to 100 based on multiple factors Volatility Filter — automatic signal suppression during low market volatility periods Multi-Timeframe Confirmation — divergence verification on higher timeframe for increased reliability Divergence Strength Analysis — calculation of percentage difference between price and indicator movement Information Dashboard — detailed real-time signal statistics Cooldown System — prevention of multiple consecutive signals 💡 How It Works: The indicator uses the classic divergence concept — the divergence between price movement and the MACD oscillator. However, instead of simple pivot detection, the algorithm: Scans the market for local extremes (pivots) on price and MACD histogram Searches for divergences — when price updates low/high while MACD shows opposite movement Assesses quality — analyzes divergence strength, volatility, higher timeframe confirmation Filters noise — eliminates weak signals through threshold system and cooldown Generates signal — only when all quality criteria are met 🔧 Key Parameters: MACD Settings: Fast Length (12), Slow Length (26), Signal Length (9) Divergence Detection: Pivot Lookback (5), Max Lookback Range (60), Min Divergence Strength (15%) Quality Filters: Min Quality Score (60), Volatility Filter, MTF Confirmation, Signal Cooldown (5) 📊 How to Use: Add indicator to chart — it will automatically start scanning Configure filters — start with default settings, then adapt to your trading style Watch for signals: 🟢 Green "BUY" label = bullish divergence, 🔴 Red "SELL" label = bearish divergence Check quality score on labels (Q: XX) Use information panel to monitor statistics and current market conditions ⚙️ Settings Guide: For swing trading (4H-Daily): Increase Pivot Lookback to 7-10, set Min Quality Score to 70+ For day trading (15m-1H): Keep default settings, enable all filters For scalping (1m-5m): Decrease Min Quality Score to 50, disable MTF Confirmation For volatile markets (crypto): Increase Min Divergence Strength to 20-25%, enable Volatility Filter ⚠️ Important Notes: Divergences are probabilistic signals, not guaranteed reversals Use additional confirmation (support/resistance levels, volume, price action) Adjust parameters for specific asset and timeframe Signals appear with Pivot Lookback bars delay (retrospective confirmation) On volatile markets, increase Min Quality Score to reduce false signals
Pine Script® göstergesi
Smart-Day-Trader tarafından
Ultimate S&D (Pro Edition)**Institutional Supply & Demand (Auto-Cleaning & Freshness Tracking)** This indicator is designed for Price Action and Futures traders who require a clean, objective view of Institutional Supply and Demand zones. unlike standard indicators that clutter the chart with historic levels, this script focuses on **"Smart Mitigation"**—automatically removing zones that have been invalidated to keep your chart pristine. ### Key Features: **1. 🏦 Institutional Imbalance Detection** The script identifies **ERC (Extended Range Candles)** and momentum shifts to locate true institutional interest. It automatically marks the "Base" preceding the explosive move as a valid zone. **2. 🧹 Smart Auto-Invalidation (Clean Chart Logic)** Most S&D indicators leave old, broken zones on the chart. This script actively monitors price action: * **Supply Zones:** Automatically deleted if price breaks above the zone's high. * **Demand Zones:** Automatically deleted if price breaks below the zone's low. * **Result:** You only see active, defendable levels. **3. 🔄 Zone Freshness Tracking (Fresh vs. Tested)** Visual cues help you gauge the probability of a setup: * **Fresh Zones:** Solid borders with darker colors. (High Probability) * **Tested Zones:** Once price touches a zone but holds, the zone turns **Dashed** and lighter in color, labeled as "(Tested)". (Lower Probability / Caution required) **4. 🏷️ Dynamic Timeframe Labeling** Zones are automatically labeled with the chart's timeframe (e.g., "1H Demand", "15m Supply"), making it perfect for Multi-Timeframe Analysis (MTF) and sharing screenshots. **5. 🔔 Integrated Alerts** Never miss an entry. You can set alerts to trigger the moment price enters a Fresh or Tested zone. --- ### ⚙️ Settings Guide: * **Imbalance Strength:** Controls how strict the filter is. Higher values (e.g., 4.0) only show the strongest institutional moves. Lower values (e.g., 2.0) show more local zones. * **Lookback Period:** How many bars are used to calculate average volatility. * **Zone Extension:** How far the boxes extend to the right (auto-limited to prevent clutter). ### 🎯 How to use: Recommended for use as a "Confluence Tool." Use your daily bias and trend analysis first, then use this script to identify precise entry zones on 1H, 15m, or 5m charts. *For educational purposes only. Trade responsibly.*
Pine Script® göstergesi
danielzacker tarafından
Student Wyckoff Target Shooter **Target Shooter — Equal Move Target Tool (Larry Williams idea)** **1. What this indicator does** Target Shooter is a tool that measures the last meaningful price swing and projects an **equal move target** in the direction of the breakout. The logic is simple: * The market makes a move from point A to point B (a swing high to a swing low, or vice versa). * Then price breaks out above or below this swing range. * Target Shooter takes the size of that swing and **adds it in the direction of the breakout**, showing a logical **price target zone** where the move may: * slow down, * react, * or potentially reverse. This is a practical implementation of the “Equal Moves” idea often referenced by Larry Williams. --- **2. Core idea (example)** Example from the classic explanation: * Price drops from **80 down to 20** → the move is **60 points**. * The swing range is now: **High = 80, Low = 20**. * Later, price **breaks above 80**. Target Shooter assumes: > “If the market could move 60 points in one direction, after a breakout it may travel another 60 points in the opposite direction.” So the upside target becomes: * Move size: 80 − 20 = 60 * Breakout above 80 * **Target = 80 + 60 = 140** The indicator finds such swings automatically and draws: * **UT (Upper Target)** on upside breakouts * **DT (Down Target)** on downside breakouts --- **3. What you see on the chart** 1. **Target lines** * When price breaks **above** a previous swing range, the indicator plots a horizontal **UT (Upper Target)** line — the projected equal move target. * When price breaks **below** the previous swing range, it plots a **DT (Down Target)** line — the downside target. * Each line is drawn from the breakout bar and extended to the right for a user-defined number of bars. 2. **Price labels** * A small label “UT” or “DT” is shown at the end of the line with the exact target price. * This makes it easy to see where the projected target is without checking the scale. 3. **Optional swing range (debug view)** * There is an option to display the **swing range** that the target is based on (similar to a Donchian channel on previous bars). * This shows the upper (swing high) and lower (swing low) boundaries the indicator used to define the last move. --- **4. Key inputs (plain language)** * **Swing window length (bars)** How many bars back the indicator looks to find the last meaningful swing (highest high and lowest low). This is like the length of a Donchian channel used to define the previous range. Smaller values → more frequent, shorter targets. Larger values → bigger swings and more distant targets. * **Minimum move size (in ticks)** This is a noise filter. If the distance between the swing high and swing low is smaller than this threshold, no targets are drawn. The indicator will only react to moves that are big enough to matter for your trading. * **Breakout type: Close vs High/Low** * **Breakout by Close**: The target appears only when the **bar closes** above/below the swing range. More conservative and fewer false signals. * **Breakout by High/Low**: The target appears as soon as the **high** or **low** of the bar breaks the swing range. Faster and more aggressive, but more sensitive to noise. * **Target line length (bars)** How far to the right the UT/DT lines should be extended. Shorter length → local target zones. Longer length → important levels visible far into the future. * **Appearance settings** * Separate color, width and style for **UT** and **DT** lines. * Option to show or hide labels with price and “UT/DT” text. --- **5. How to use Target Shooter in trading** > Important: this is **not** an entry signal indicator. > Target Shooter is a **targeting and context tool**, not a standalone system. Typical uses: 1. **Planning take-profit zones** * You already have an entry signal from your own strategy (Wyckoff, Larry Williams patterns, levels, volume, whatever you use). * Target Shooter shows a **logical equal move target** where the current wave can reasonably “shoot”. * You can: * place your main take-profit around the target, * scale out part of the position, * tighten stops when price approaches the target. 2. **Finding potential reaction / reversal areas** * Equal move targets often act as **zones of interest**. * If price reaches a UT/DT level and then shows weakness/absorption/volume spikes or reversal candles, this might be a good place to take profits or look for counter-trend opportunities (for experienced traders). 3. **Assessing trend strength** * If price **easily exceeds** the equal move target and keeps going without any reaction, it suggests a very strong trend. * If price **fails to reach** the target and reverses early, the move is weaker than expected. --- **6. Timeframes** Target Shooter can be used on: * **Intraday** (M5, M15, M30, H1) — for shorter-term targets within the day, * **Higher timeframes** (H4, D1 and above) — for swing and position trades. General rule: The **higher the timeframe and the larger the swing**, the **more important** the target level tends to be. --- **7. Notes and limitations** * The indicator does **not** predict the future. It simply projects a geometric equal move from the last swing. * It should be combined with your own trading framework: * support/resistance, * Wyckoff / VSA, * trend tools, * volume/flow, etc. * Always keep proper risk management. A target is a **scenario**, not a guarantee. .
Pine Script® göstergesi
StudentWyckoff tarafından
2
Breakout Pullback Continuation//@version=5 indicator("Breakout Pullback Continuation", overlay=true) // === Parameters === lookback = 20 // Look for breakouts above this many bars volumeFactor = 1.3 // How much volume needs to exceed average pullbackDepth = 3 // Max bars to wait for pullback + green // === Track State === var float breakoutLevel = na var int breakoutBar = na volumeSMA = ta.sma(volume, 20) // === Detect Breakout === recentHigh = ta.highest(high, lookback) breakout = close > recentHigh if breakout breakoutLevel := close breakoutBar := bar_index // === Check for Pullback After Breakout pullbackOccurred = na(breakoutLevel) ? false : close < breakoutLevel and bar_index > breakoutBar // === Check for Confirmation Candle greenCandle = close > open decentRange = (high - low) > (close * 0.003) volumeSpike = volume > volumeSMA * volumeFactor confirmation = pullbackOccurred and greenCandle and decentRange and volumeSpike and (bar_index - breakoutBar <= pullbackDepth) // === Signal Plot === plotshape(confirmation, title="Pullback Continuation", location=location.belowbar, color=color.lime, style=shape.triangleup) alertcondition(confirmation, title="Breakout Pullback Alert", message="🚀 {{ticker}} breakout-pullback-confirmation at {{close}}")
Pine Script® göstergesi
mason_fibkins tarafından
Momentum Breakout Signal//@version=5 indicator("Momentum Breakout Signal", overlay=true) // === Breakout Logic === length = 20 // Lookback for recent high recentHigh = ta.highest(high, length) // === Breakout Condition: Close > prior high priceBreakout = close > recentHigh // === Volume Spike Confirmation === volumeSMA = ta.sma(volume, 20) volumeSpike = volume > volumeSMA * 1.3 // Customize sensitivity // === Optional: Filter for strong candles only isGreen = close > open decentRange = (high - low) > (close * 0.003) // === Final Signal Logic === signal = priceBreakout and volumeSpike and isGreen and decentRange plotshape(signal, title="Breakout Signal", location=location.abovebar, color=color.orange, style=shape.triangleup, size=size.small) alertcondition(signal, title="Momentum Breakout Alert", message="🚀 {{ticker}} breakout confirmed at {{close}}")
Pine Script® göstergesi
mason_fibkins tarafından
Morning Momentum//@version=5 indicator("Morning Momentum", overlay=true) // This is your one required declaration // --- Define Time Window --- startTime = timestamp("2025-11-28T09:30:00") endTime = timestamp("2025-11-28T10:00:00") inWindow = time >= startTime and time <= endTime // --- Define Price Change --- priceChange = (close - open) / open * 100 // --- Define Volume Spike --- volumeSMA = ta.sma(volume, 20) volumeSpike = volume > volumeSMA // --- Trigger Condition --- signal = inWindow and priceChange > 2 and volumeSpike // --- Plot Signal --- plotshape(signal, title="Momentum Signal", location=location.abovebar, color=color.green, style=shape.triangleup)
Pine Script® göstergesi
mason_fibkins tarafından