Zen CSC Bar Strategy v1🧠 Zen Consecutive Bar Strategy — Research Tool (Trend + Reversal)
**Description:**
This strategy is designed as a flexible research tool for studying price behavior following consecutive bull or bear bars. It allows users to explore breakout and reversal scenarios with full control over trade entry and filtering logic.
**🔧 Key Features:**
* **Configurable bar sequence**: Detects customizable streaks of consecutive bull or bear bars.
* **Trend or Reversal mode**: Toggle between breakout-style entries or fade/reversal-style setups.
* **MA-based filter**: Optionally restrict trades to occur above or below the 20-period moving average.
* Longs can be limited to above/below MA
* Shorts can be limited to above/below MA
* **Customizable R-multiple targets**: Choose between 0.5R, 1R, 1.5R, or 2R reward targets.
* **Stop loss logic**: Uses syminfo.mintick to offset stops by 1 tick beyond the pattern high/low.
* **Entry logic**: Buy/Sell either on the close of the setup bar or on breakout beyond high/low.
* **Trade direction**: Enable long-only, short-only, or both.
**📊 Research Use Only:**
This is not a ready-to-trade system. It’s intended to help traders test ideas and collect performance stats under different configurations. Use it to:
* Evaluate the failure rate of open spikes
* Study behavior following strong directional bars
* Compare trend-following vs mean-reversion edge across sessions
**❗Disclaimer:**
This script is for educational purposes only. It does not constitute financial advice. Past performance does not guarantee future results.
Grafik Paternleri
Multi-Pair Matrix📊 Multi-Pair Matrix — Strategy Overview
This invite-only strategy works across five major crypto pairs: BTC, ETH, XRP, DOT, and SOL. It combines multiple confirmation signals and risk-management tools into one unified script.
🔍 Core Logic
The strategy uses a combination of proven technical tools:
Price Action Patterns: Breakouts, rejections, and reversal zones
EMA Crossovers: Short- and long-term trend confirmation
Stochastic Oscillator: Identifies exhaustion and entry opportunities
MACD Histogram: Filters entries by confirming directional momentum
Dynamic SL/TP Logic: Each trade has an independent stop-loss and take-profit based on market conditions
Delayed Entry System: Prevents immediate re-entry after closing in the opposite direction
Smart Trailing Stop-Loss: Adjusts as price moves to secure gains
⚙️ Capital Allocation & Pyramiding
The strategy uses strategy.percent_of_equity = 100, but only ~10% margin is used per position
This leaves headroom for controlled pyramiding without risking full account exposure
🔁 Recommended Pyramiding Settings per Pair
Pair -Pyramiding
BTC - 6
ETH - 6
XRP - 8
DOT - 5
SOL - 7
🧪 Backtest Conditions
Commission: 0.1% per trade
Slippage: 3 ticks
Capital: realistic margin use per trade
Pair displayed in this publication: XRP
This pair is shown in the current backtest example due to platform limitations
The remaining pairs follow the same internal logic and backtest methodology, but are not visible in a single report
⚠️ Usage Instructions
To use this script for real-time alerts:
Open the Inputs tab and enable “Live Trading Mode”
Choose your desired pair from the dropdown — this will automatically apply the correct settings
The script is designed for lower timeframe markets and is optimized for high-activity, volatile periods
All logic is contained in a single script as required — no suite publishing or duplicated variations
Vortex Hunter X - Strategy (3-Min TF) | PEPE Signal (Binance)⚙️ Vortex Hunter X - Strategy (3-Min TF) | PEPE Signal (Binance)
This strategy is designed for analyzing the PEPE/USDT pair on Binance Futures within the TradingView platform, and can be used to execute trades on any exchange of your choice.
Each position has a fixed 4% profit target and a fixed 2% stop loss. These parameters are hard-coded and do not change dynamically. The risk-to-reward ratio is fixed at 1:2.
🔎 Non-Repainting Signals and Consistency Between Backtest and Live Trading
The signals generated by this strategy are completely non-repainting, meaning once a signal is issued, it will not be altered or modified later.
Backtesting results and live trading performance on TradingView are exactly consistent, demonstrating the high reliability of the strategy.
🔁 Note About Replay Mode on TradingView
When running the strategy in Replay mode on TradingView (historical playback of the chart), you may notice some differences compared to live or backtest results.
These differences arise due to the way data is processed in Replay mode and delays in how certain filters access past information.
✅ However, it is important to understand that these differences do not indicate any repainting of signals. In live and backtest modes, signals are generated exactly according to the strategy’s logic without any changes.
🔄 Important Recommendation for Proper Script Loading
Due to the use of complex filters, multi-stage processing, and sensitive conditions in the signal logic, sometimes the browser cache may cause the script not to load fully or precisely, or some components may load with delays.
This can lead to signals not displaying correctly or minor issues in the strategy’s performance.
✅ Therefore, it is strongly recommended to clear your browser cache or press Ctrl + F5 for a full refresh on the TradingView chart page before the first use and periodically (e.g., every few days).
This ensures the script loads freshly and completely from TradingView servers, enabling accurate and smooth strategy operation.
⚠️ Important Usage Notes:
🔸 This strategy is specifically designed and optimized only for the following conditions:
Symbol: PEPEUSDT
Exchange: BINANCE
Market: Futures
Timeframe: 3 minutes (3m)
🔸 For accurate signals, please ensure the strategy runs only on the PEPE/USDT Futures chart on Binance with a 3-minute timeframe in TradingView.
🔸 ⚠️ Note: For actual trading execution, you may use any exchange (e.g., Binance, Bybit, OKX, etc.), but analysis and strategy operation must be performed strictly within TradingView with the exact above settings.
Using the strategy on incorrect symbols, timeframes, or markets may result in invalid signals.
ℹ️ Strategy Naming:
Each strategy’s name clearly indicates the asset it is configured for.
For example:
Vortex Hunter X - Strategy (3-Min TF) | PEPE Signal (Binance) for PEPE
Vortex Hunter X - Strategy (3-Min TF) | SUI Signal (Binance) for SUI
Currently, the strategy is configured and optimized for only these two pairs:
PEPEUSDT (Binance Futures)
SUIUSDT (Binance Futures)
📌 Purchasing a single subscription grants you access to both strategies (PEPE and SUI).
📈 More assets will be added to this strategy in the future, and subscribers will gain access to new versions automatically.
✅ Summary of Settings:
🎯 Take Profit (TP): 4%
⛔ Stop Loss (SL): 2%
📊 Risk-to-Reward Ratio: 1:2
⏱️ Timeframe: 3 minutes
🧪 Target Market: PEPE Futures on Binance
📩 For access or support, contact:
GOLD - 3min - LA TimeZone | US Daily Trade🔰 Strategy Description
GOLD - 3min - LA TimeZone (Buy & Sell) is a precision-engineered breakout-reentry strategy designed for Gold (XAUUSD) during the Los Angeles session, optimized for the 3-minute timeframe.
It identifies the Opening Range (first 60 minutes starting at 18:00 LA time), waits for price to break outside the range, and then looks for a reentry signal back into the range — a powerful reversal pattern often seen in gold.
📌 Key Features
⏰ Session Time: Designed for the LA session (18:00–19:00)
📈 Reentry Logic: Signals when price moves back inside the range from outside (either top or bottom)
🎯 Take-Profit & Stop-Loss: Fully adjustable via inputs (default TP: 1%, SL: 0.5%)
🛑 Force Close: Automatically closes open positions at 17:55 LA time
🔔 Alerts Enabled: Buy, Sell, and Force Close alerts included
🧠 Notes
Only one trade per day is allowed to reduce overtrading.
Built for fast scalping and reversal catching on gold.
Works best on volatile days with clear opening moves.
Feel free to test, customize risk settings, and align this tool with your own trading plan.
Backtest it thoroughly before using in live environments.
📊 Published by: US Daily Trade
Break and Retest High Probability StrategyWhat does the script Do:
Script uses Break and Retest strategy on Key Levels like PMH, PDH, PMH, PML and ORB levels. Based on the strength of the candle at these key levels a position is taken and based on Dynamic stop loss, we scale out of the position at key levels. Scale out can also happen based on the QQQ trend.
How it does it:
First the script identifies No Trade Zone - which is higher of PMH and PDH for Highest position of No Trade Zone, and lower of PML and PDL. Any trades within this doesnt take any Trade entries.
Entries are taken in only Regular Trading Hours.
Candle strength is constantly tracked for break out these levels and then wait for retest levels based on Volatality on that day with ATR levels. If it fails to come back to retest - it is ignored else at retest levels strength of the bar is tracked. Scaling out can be done based on various Input parameters given in the strategy. VWAP and 9 EMA is also tracked for taking an entry or not.
How to use it:
Make sure to use various parameters within Inputs like Candle Strength at vwap, QQQ confluence to tweak and see what works best for the time frame and stock.
In the Multi Time frame construct - if you are on 5min time frame the candle stregth can be tracked in lower time frame which can be 1, 2, 3 min etc. This is also configurable within the Inputs.
Make sure to use the levels and values displayed in the table to see real time data.
Also, You can just have the Long entry, Short Entry and Plot variables selected in Style section to declutter the chart. Feel free to reuse the chart
what makes it original.
Strategy Parameters
• Is representative of real world trading conditions.
Break and Retest at key levels while following various confluence set ups makes it completely real world and battle tested indicator. All the parameters used within Inputs and Style are completely known Market variables.
• Is compatible with the markets their strategy is written for.
This is best for doing scalping where momentum and volatality is the king.
• Produces realistic results.
Like any strategy nothing is 100% guaranteed. But the key is to monitor the Profit factor and exit at right positions even if it means lesser number of trades.
This strategy is tested against lot of Tech stocks like nvidia, tesla, amazon against QQQ confluence.
. to help traders interpret the results they publish with their strategy,
Please feel free to tweak the parameters to tweak the strategy and see what works best for the stock you are placing this indicator on.
I primarily take the default parameters of this strategy to do scalping. The Multitime frame restest ( which goes to lower timeframe to check the strength of bars - which is again configurable by Fixed Retest bars and Retest Time Frame. I would recommend you to use Enable candle pattern filter to further refine the trades to be high probability.
This is a high probability set up - so please dont expect many trades from each stock. The strategy only gets triggered when it sees valid signal as per parameters set on the strategy.
ICT Silver Bullet (JadeCap)This strategy backtests the "ICT Silver Bullet Strategy" by JadeCap.
Strategy Description:
This strategy backtests the "ICT Silver Bullet" concept as interpreted by JadeCap. It focuses on plotting the Asia, London, and 9 AM EST highs and lows, and looks for entries during the Silver Bullet hours: 10–11 AM EST and 2–3 PM EST.
Using a 5-minute chart, the strategy waits for a Fair Value Gap (FVG) to form during a Silver Bullet session. A limit order is placed at the FVG if at least one of the specified highs or lows has been raided (liquidity taken).
Caveats:
It is unclear what should happen if both the highs and lows of any range are taken. This script offers three selectable behaviors to handle this case.
It’s unclear whether both AM and PM sessions should always be traded. This strategy allows you to:
Limit the number of daily wins (e.g. skip PM if AM is successful)
Choose to trade only AM, only PM, or both
Customizable Strategy Options (find these in the settings):
Minimum FVG Ticks
Max Daily Wins
Stop loss at candle 1
Trading sessions
Multiple raids
Close Trade Time
Source: www.youtube.com
As always, please let me know if I missed something or an improvement can be made.
Buy Dip Multiple Positions🎯 Objective
This strategy aims to capture aggressive dip-buying opportunities during volume-confirmed price reversals in short term downtrending markets. It is optimized for multi-entry precision, adaptive stop management, and real-time trade monitoring.
It allows traders to execute multiple long entries and dynamically trail stops to maximize gains while capping risk. Designed with modular inputs, this strategy is ideal for intraday momentum scalping and swing trading alike.
🔧 How It Operates
The strategy triggers buy entries when three conditions align:
Reversal Candle: Current close < prior low × 0.998
Volume Confirmation: Current volume exceeds average of prior 2 bars × 1.2
Price Surge Threshold: Current close below user-defined % of close from N bars ago
Once a reversal candle is confirmed, the strategy:
Calculates position size based on user-defined risk parameters
Allows up to a max number of simultaneous trades
Trailing Stop kicks in 2 bars after entry, climbing by a user-defined % each bar
Exit occurs when price hits either the trailing stop or target price
🛠️ Inputs
Users can customize all major aspects of the strategy:
Max Simultaneous Trades: Default 20
Trailing Stop Increase per Bar (%): Default 1%
Initial Stop (% of Reversal Low): Default 85%
Target Price (% Above Reversal Low): Default 60%
Price Surge Threshold (% of Past Close): Default 89%
Surge Lookback Bars: Default 14
Show Active Trade Dot: Toggle to display green trade status dot
📊 Visual Overlays
The chart displays the following:
Marker Description
🟢 Green Dot Active trade (toggleable)
🔴 Red Dot Max trades reached
📈 Trailing Stop Applied internally but not plotted (can be added)
📊 Metrics Plots of win rate, winning/losing trade counts
📎 Notes
Strategy uses strategy.cash allocation logic
Entry size adapts to account equity and risk per trade
All parameters are accessible via the settings panel
Built entirely in Pine Script v5
This strategy balances flexibility and precision, giving traders control over entry timing, capital allocation, and stop behavior. Ideal for those looking to automate dip-buy setups with tactical overlays and visual alerts.
Roboquant No-Wick Strategy V1.3This strategy is built specifically for the MNQ1! futures contract on the 15-minute timeframe. It identifies and trades a specific price action setup where candles have little to no wick (either top or bottom), indicating potential momentum continuation. The system places pending limit orders with defined stop-loss and take-profit levels based on ATR volatility.
In theory the strategy should also work on other assets & timeframes if the settings are adjusted.
🔍 Key Features:
Only runs on MNQ1! and the 15-minute chart (errors otherwise to prevent misuse).
Detects "no-wick" candles based on configurable wick and body size filters.
Supports session-based trading (default: 02:00–16:00 NY time).
Executes limit-style entries placed a set number of points away from candle levels.
Uses ATR-based stop-loss and take-profit calculations for adaptive risk control.
Cancels orders automatically after a configurable number of bars if not filled.
Built-in performance statistics table shows live metrics on strategy results.
Trade signals and SL/TP levels are plotted directly on the chart for easy visualization.
⚙️ User Inputs Include:
Candle Settings: Wick percentage, min/max body size
Risk Settings: ATR multiplier, risk/reward (TP), contract size
Strategy Settings: Session time, entry offset distance, cancel-after bars
Performance Table: Toggle visibility, starting balance for display calculations
📈 Performance Table Metrics:
Total trades
Starting and ending balance
Net return in $ and %
Win rate
Maximum drawdown (in $ and %)
⚠️ Notes:
This strategy does not repaint.
Meant for educational and research purposes only — it is not financial advice.
Results may vary based on market conditions, latency, and broker execution. Always forward-test before using in live trading.
In order to unlock the use on all assets and timeframes a password is required which is included in our premium community.
StockMarketWolf 9/20 EMA VWAP MACD StrategyThis strategy is all about catching momentum in the market by combining some of the most trusted technical indicators—moving averages, VWAP, and MACD—to help you spot better trade opportunities with more confidence.
Here’s the simple idea:
Use the 9 and 20 EMA crossover to spot when the short-term trend is turning up or down.
Check that the price is trading above or below the VWAP (the average price weighted by volume for the day) to confirm the overall market sentiment.
Use the MACD to make sure momentum is supporting your trade—no point jumping in if momentum isn’t backing it up.
How it works:
Go long when the 9 EMA crosses above the 20 EMA, price is above VWAP, and MACD is signaling positive momentum.
Go short when the 9 EMA crosses below the 20 EMA, price is below VWAP, and MACD shows bearish momentum.
Exit the trade when these signals flip or momentum fades.
Why it’s useful:
It helps you avoid trading against the trend by using the VWAP filter.
The MACD momentum check cuts down on fake breakouts.
It’s straightforward and works well on popular day trading charts like the 5-minute timeframe.
Great for high-volume stocks and futures like SPY, QQQ, or ES futures.
Things to keep in mind:
It doesn’t throw out signals all day — you get quality over quantity.
Like any strategy, it’s not perfect and can struggle during sideways markets.
Sticking to the rules and having patience is key.
All in all, this is a solid, no-nonsense strategy that mixes trend and momentum in a way that makes trading feel a bit more clear and less noisy. Perfect if you want a systematic approach without overcomplicating things.
First Candle Rule (Casper SMC)This strategy backtests the Casper SMC "First Candle Rule".
Strategy Description:
The idea of the "First Candle Rule" is that it takes the first 30 minutes from the open and marks the high and low of that range. Once either the high or low is broken, it looks for a fair value gap (FVG) back into the range. Once a FVG is confirmed a market order is placed.
Customizable Strategy Options:
Minimum FVG Ticks
Stop loss at
First 30 Minutes Start Time
Stop Trading Time
Close Trades Time
Source: www.youtube.com
Nidnoi 89 TheoryNidnoi Morning Trading style
// This strategy is based on a reversal logic applied to the 8AM candle (Bangkok Time, UTC+7).
// The logic is:
// - If the 8AM candle is bullish (green), it indicates potential exhaustion — enter a SELL at the 9AM open.
// - If the 8AM candle is bearish (red), it suggests a possible bounce — enter a BUY at the 9AM open.
// All trades are closed at the 10AM open, limiting exposure to 1 hour.
//
// This strategy is designed for XAUUSD on a 1-hour chart and aligns with short-term intraday reversal patterns.
// The actual time used in code (UTC+7) is 9PM for the 8AM candle, and 10PM for the exit at 10AM.
//
// Highlights are shown on the 8AM candle for visual confirmation.
// Make sure your chart is set to 1H timeframe and uses XAUUSD.
GOLD DR Long with diamond & TP2 Exit האינדיקטור מזהה נקודת כניסה אידיאלית ל־LONG, פותח פוזיציה, קובע יעד רווח אוטומטי, מגן עם סטופלוס חכם, ומבצע מיצוע רק כשהתנאים בשלים – הכל קורה אוטומטית, בזמן אמת, על הגרף.
The indicator identifies an ideal LONG entry, opens a position, sets an automatic take-profit target, protects with a smart stop-loss, and averages in only when conditions are right – all fully automated, in real time, right on the chart.
ZYTX CCI SuperTrendZYTX CCI SuperTrend
The definitive integration of CCI and SuperTrend trend-following indicators, delivering exemplary performance in automated trading bots.
ZYTX SuperTrend V1ZYTX SuperTrend V1 Indicator
Multi-strategy intelligent rebalancing with >95% win rate
Enables 24/7 automated trading
ZYTX GKDDThe ZYTX High-Sell Low-Buy Indicator Strategy is a trend-following indicator that integrates multiple indicator resonances. It demonstrates the perfect performance of an automated trading robot, truly achieving the high-sell low-buy strategy in trading.
ADX GatekeeperADX Gatekeeper is an original strategy that combines three classic filters to improve trend-following accuracy and avoid choppy markets.
Combines RSI, OBV, and ADX filters to catch stronger trends and avoid sideways markets. RSI confirms momentum extremes, OBV confirms volume flow, and ADX filters low-trend conditions. Fully configurable for different market conditions.
RSI Filter: Avoids overbought/oversold traps by requiring RSI < 35 for longs and > 70 for shorts.
OBV Filter: Confirms directional volume with positive OBV changes for longs and negative for shorts.
ADX Filter: Filters out low-volatility sideways conditions by requiring ADX above a configurable threshold (default 45).
The combined conditions aim to identify stronger trend moves while avoiding choppy markets. All filters can be toggled on or off for flexibility.
Default risk: 10% of equity per trade. Users can adjust this.
Ideal for trend traders looking to filter noise and improve entry quality.
High Win Rate XAUUSD Strategy (EMA21 + RSI + Volume MA20)Buy Conditions:
Price above EMA 21
EMA 21 is rising
RSI > 55 and RSI increasing
Close is above EMA 21
Current candle is green (close > open)
Volume > MA20 of volume
Price below EMA 21
EMA 21 is falling
RSI < 45 and RSI decreasing
Close is below EMA 21
Current candle is red (close < open)
Volume > MA20 of volume
Open Breakout Strategyfirst 5min candle
SL is 0.25% TP is 2.25%
If breks low it is hsort
If breaks hi then it is long
PC UpdatedThis indicator identifies a high-probability breakout setup using a simple but powerful 3-candle formation. It works on lower timeframes (like 5m) and is ideal for scalping or short-term intraday setups.
NASDAQ Liquidity Breaker Bot1. Define session time (7:20 PM – 7:40 PM BD time / 9:20–9:40 AM EST)
2. Detect 15M swing high/low zones
3. On 1M chart: Detect strong bullish/bearish break
4. Identify breaker candle zone
5. Trigger entry based on break + retest logic
6. Set SL and TP logic (dynamic if needed)
7. Plot everything visually (entries, exits, zones)
MACD EMA + Time FilterStrategy Description: MACD EMA + Time Filter
This strategy combines MACD momentum, EMA trend filtering, and an optional time-based session filter (GMT+7) to generate high-probability trading signals. It is designed for intraday or short-term trading on small timeframes, and allows both Buy and Sell setups with fixed Risk-Reward (RR) control.
✅ Key Components:
EMA Filter: Uses a 21-period Exponential Moving Average (EMA) to determine the trend direction.
MACD Confirmation: Entries are confirmed using MACD crossover signals with customizable fast, slow, and signal periods.
Time Filter: Trades are only taken during a defined session (e.g., 19:00–22:00 GMT+7), ideal for high-liquidity trading hours.
RR Management: Entry signals include automatic Stop Loss (SL) and Take Profit (TP) levels, based on a pip buffer and RR multiplier.
Custom Options:
Enable/disable Buy or Sell signals
Show/hide SL/TP labels
Optionally display EMA on chart
Divergence Strategy [Trendoscope®]🎲 Overview
The Divergence Strategy is a sophisticated TradingView strategy that enhances the Divergence Screener by adding automated trade signal generation, risk management, and trade visualization. It leverages the screener’s robust divergence detection to identify bullish, bearish, regular, and hidden divergences, then executes trades with precise entry, stop-loss, and take-profit levels. Designed for traders seeking automated trading solutions, this strategy offers customizable trade parameters and visual feedback to optimize performance across various markets and timeframes.
For core divergence detection features, including oscillator options, trend detection methods, zigzag pivot analysis, and visualization, refer to the Divergence Screener documentation. This description focuses on the strategy-specific enhancements for automated trading and risk management.
🎲 Strategy Features
🎯Automated Trade Signal Generation
Trade Direction Control : Restrict trades to long-only or short-only to align with market bias or strategy goals, preventing conflicting orders.
Divergence Type Selection : Choose to trade regular divergences (bullish/bearish), hidden divergences, or both, targeting reversals or trend continuations.
Entry Type Options :
Cautious : Enters conservatively at pivot points and exits quickly to minimize risk exposure.
Confident : Enters aggressively at the latest price and holds longer to capture larger moves.
Mixed : Combines conservative entries with delayed exits for a balanced approach.
Market vs. Stop Orders: Opt for market orders for instant execution or stop orders for precise price entry.
🎯 Enhanced Risk Management
Risk/Reward Ratio : Define a risk-reward ratio (default: 2.0) to set profit targets relative to stop-loss levels, ensuring consistent trade sizing.
Bracket Orders : Trades include entry, stop-loss, and take-profit levels calculated from divergence pivot points, tailored to the entry type and risk-reward settings.
Stop-Loss Placement : Stops are strategically set (e.g., at recent pivot or last price point) based on entry type, balancing risk and trade validity.
Order Cancellation : Optionally cancel pending orders when a divergence is broken (e.g., price moves past the pivot in the wrong direction), reducing invalid trades. This feature is toggleable for flexibility.
🎯 Trade Visualization
Target and Stop Boxes : Displays take-profit (lime) and stop-loss (orange) levels as boxes on the price chart, extending 10 bars forward for clear visibility.
Dynamic Trade Updates : Trade visualizations are added, updated, or removed as trades are executed, canceled, or invalidated, ensuring accurate feedback.
Overlay Integration : Trade levels overlay the price chart, complementing the screener’s oscillator-based divergence lines and labels.
🎯 Strategy Default Configuration
Capital and Sizing : Set initial capital (default: $1,000,000) and position size (default: 20% of equity) for realistic backtesting.
Pyramiding : Allows up to 4 concurrent trades, enabling multiple divergence-based entries in trending markets.
Commission and Margin : Accounts for commission (default: 0.01%) and margin (100% for long/short) to reflect trading costs.
Performance Optimization : Processes up to 5,000 bars dynamically, balancing historical analysis and real-time execution.
🎲 Inputs and Configuration
🎯Trade Settings
Direction : Select Long or Short (default: Long).
Divergence : Trade Regular, Hidden, or Both divergence types (default: Both).
Entry/Exit Type : Choose Cautious, Confident, or Mixed (default: Cautious).
Risk/Reward : Set the risk-reward ratio for profit targets (default: 2.0).
Use Market Order : Enable market orders for immediate entry (default: false, uses limit orders).
Cancel On Break : Cancel pending orders when divergence is broken (default: true).
🎯Inherited Settings
The strategy inherits all inputs from the Divergence Screener, including:
Oscillator Settings : Oscillator type (e.g., RSI, CCI), length, and external oscillator option.
Trend Settings : Trend detection method (Zigzag, MA Difference, External), MA type, and length.
Zigzag Settings : Zigzag length (fixed repaint = true).
🎲 Entry/Exit Types for Divergence Scenarios
The Divergence Strategy offers three Entry/Exit Type options—Cautious, Confident, and Mixed—which determine how trades are entered and exited based on divergence pivot points. This section explains how these settings apply to different divergence scenarios, with placeholders for screenshots to illustrate each case.
The divergence pattern forms after 3 pivots. The stop and entry levels are formed on one of these levels based on Entry/Exit types.
🎯Bullish Divergence (Reversal)
A bullish divergence occurs when price forms a lower low, but the oscillator forms a higher low, signaling a potential upward reversal.
💎 Cautious:
Entry : At the pivot high point for a conservative entry.
Exit : Stop-loss at the last pivot point (previous low that is higher than the current pivot low); take-profit at risk-reward ratio. Canceled if price breaks below the pivot (if Cancel On Break is enabled).
Behavior : Enters after confirmation and exits quickly to limit downside risk.
💎Confident:
Entry : At the last pivot low, (previous low which is higher than the current pivot low) for an aggressive entry.
Exit : Stop-loss at recent pivot low, which is the lowest point; take-profit at risk-reward ratio. Canceled if price breaks below the pivot. (lazy exit)
Behavior : Enters early to capture trend continuation, holding longer for gains.
💎Mixed:
Entry : At the pivot high point (conservative).
Exit : Stop-loss at the recent pivot point that has resulted in lower low (lazy exit). Canceled if price breaks below the pivot.
Behavior : Balances entry caution with extended holding for trend continuation.
🎯Bearish Divergence (Reversal)
A bearish divergence occurs when price forms a higher high, but the oscillator forms a lower high, indicating a potential downward reversal.
💎Cautious:
Entry : At the pivot low point (lower high) for a conservative short entry.
Exit : Stop-loss at the previous pivot high point (previous high); take-profit at risk-reward ratio. Canceled if price breaks above the pivot (if Cancel On Break is enabled).
Behavior : Enters conservatively and exits quickly to minimize risk.
💎Confident:
Entry : At the last price point (previous high) for an aggressive short entry.
Exit : Stop-loss at the pivot point; take-profit at risk-reward ratio. Canceled if price breaks above the pivot.
Behavior : Enters early to maximize trend continuation, holding longer.
💎Mixed:
Entry : At the previous piot high point (conservative).
Exit : Stop-loss at the last price point (delayed exit). Canceled if price breaks above the pivot.
Behavior : Combines conservative entry with extended holding for downtrend gains.
🎯Bullish Hidden Divergence (Continuation)
A bullish hidden divergence occurs when price forms a higher low, but the oscillator forms a lower low, suggesting uptrend continuation. In case of Hidden bullish divergence, b]Entry is always on the previous pivot high (unless it is a market order)
💎Cautious:
Exit : Stop-loss at the recent pivot low point (higher than previous pivot low); take-profit at risk-reward ratio. Canceled if price breaks below the pivot (if Cancel On Break is enabled).
Behavior : Enters after confirmation and exits quickly to limit downside risk.
💎Confident:
Exit : Stop-loss at previous pivot low, which is the lowest point; take-profit at risk-reward ratio. Canceled if price breaks below the pivot. (lazy exit)
Behavior : Enters early to capture trend continuation, holding longer for gains.
🎯Bearish Hidden Divergence (Continuation)
A bearish hidden divergence occurs when price forms a lower high, but the oscillator forms a higher high, suggesting downtrend continuation. In case of Hidden Bearish divergence, b]Entry is always on the previous pivot low (unless it is a market order)
💎Cautious:
Exit : Stop-loss at the latest pivot high point (which is a lower high); take-profit at risk-reward ratio. Canceled if price breaks above the pivot (if Cancel On Break is enabled).
Behavior : Enters conservatively and exits quickly to minimize risk.
💎Confident/Mixed:
Exit : Stop-loss at the previous pivot high point; take-profit at risk-reward ratio. Canceled if price breaks above the pivot.
Behavior : Uses the late exit point to hold longer.
🎲 Usage Instructions
🎯Add to Chart:
Add the Divergence Strategy to your TradingView chart.
The oscillator and divergence signals appear in a separate pane, with trade levels (target/stop boxes) overlaid on the price chart.
🎯Configure Settings:
Adjust trade settings (direction, divergence type, entry type, risk-reward, market orders, cancel on break).
Modify inherited Divergence Screener settings (oscillator, trend method, zigzag length) as needed.
Enable/disable alerts for divergence notifications.
🎯Interpret Signals:
Long Trades: Triggered on bullish or bullish hidden divergences (if allowed), shown with green/lime lines and labels.
Short Trades: Triggered on bearish or bearish hidden divergences (if allowed), shown with red/orange lines and labels.
Monitor lime (target) and orange (stop) boxes for trade levels.
Review strategy performance metrics (e.g., profit/loss, win rate) in the strategy tester.
🎯Backtest and Optimize:
Use TradingView’s strategy tester to evaluate performance on historical data.
Fine-tune risk-reward, entry type, position sizing, and cancellation settings to suit your market and timeframe.
For questions, suggestions, or support, contact Trendoscope via TradingView or official support channels. Stay tuned for updates and enhancements to the Divergence Strategy!