Şimdi başlat

Ortalanmış Osilatörler

Filtered Percentile OscillatorFiltered Percentile Oscillator (FPO | MisinkoMaster) The Filtered Percentile Oscillator is a modern trend-following tool designed to combine the power of percentile ranking with adaptive trend strength filtering. By integrating a filter based on ADX strength, this oscillator aims to reduce noise and improve signal quality, helping traders identify more reliable bullish and bearish momentum zones. This indicator works well across different markets, especially where volatility and trend clarity fluctuate. Although it can be noisy at times, the intelligent filtering mechanism provides strong potential for spotting actionable trend signals. 🔍 Concept & Idea The idea behind the Filtered Percentile Oscillator is to use the percentile rank of price changes as a normalized measure of momentum, then apply an adaptive filter based on the Average Directional Index (ADX) to adjust sensitivity dynamically. By combining these two concepts: The Percentile Oscillator captures how extreme the current price is relative to recent price history. The ADX-based filter adjusts threshold levels and confirms if the market is trending strongly enough to trust these percentile signals. This dual-filtering mechanism improves the indicator’s ability to avoid false signals caused by noisy or non-trending environments. ⚙️ How It Works The indicator calculates the Percentile Rank of the user-selected price source over a defined length (len). This percentile oscillator oscillates between -100% and +100%, reflecting relative price positioning. It calculates the ADX and its percentile rank over a separate filter length (adx_len and ap_len) to estimate trend strength and market activity. A combined potential filter checks if the sum of the absolute percentile oscillator and ADX percentile exceeds a user-defined threshold (pot_t). This filter controls whether signals are considered valid. Thresholds for long and short signals dynamically adapt based on whether the ADX percentile exceeds the filter threshold (adx_t): When strong trend strength is detected (ADX percentile > threshold), tighter upper and lower thresholds (ut and lt) apply to capture sharper trend signals. When trend strength is weaker, wider thresholds (utm and ltm) are used to filter noise and reduce false signals. Trend states are determined by comparing the percentile oscillator to these adaptive thresholds and validating the potential filter condition. Overbought and oversold zones are also plotted for identifying potential reversal or exhaustion areas. 🧩 Inputs Overview Length – Controls the lookback period for the Percentile Oscillator calculation (default 29). Source – The price data source used for oscillator calculation (default: close). Filter Length – Lookback period for ADX calculation used as a filter (default 12). Filter % Length – Length used to calculate the percentile rank of the ADX filter (default 8). Trending Upper Threshold – Upper bound for bullish signals when trend strength is strong (default 10). Trending Lower Threshold – Lower bound for bearish signals when trend strength is strong (default -10). Ranging Upper Threshold – Upper bound for bullish signals when trend strength is weak (default 15). Ranging Lower Threshold – Lower bound for bearish signals when trend strength is weak (default -15). Sum Filter Threshold – Minimum combined percentile value required to validate signals (default 100). Filter Threshold – Minimum ADX percentile value required to switch to tighter thresholds (default 50). Overbought – Level indicating overbought conditions for the oscillator (default 80). Oversold – Level indicating oversold conditions for the oscillator (default -80). 📌 Usage Notes Adaptive Filtering: The indicator dynamically adjusts sensitivity to market trend strength, reducing false signals during ranging or low-activity periods. Normalized Momentum: Using percentile ranks allows comparison across different instruments and timeframes on a consistent scale. Trend Confirmation: The ADX percentile filter ensures signals are stronger and more reliable when the market is trending. Visual Guidance: Colored plots, threshold lines, and background fills improve signal interpretation and decision-making. Customization: Thresholds and lengths can be fine-tuned for different markets or trading styles. Complementary Use: Best combined with volume analysis, price action, or other indicators for comprehensive trade confirmation. Backtest First: Always validate settings on historical data to match your preferred instrument and timeframe before live trading. ⚠️ Disclaimer This indicator is provided solely for educational and analytical use. It is not financial advice. Trading involves risk, and users should perform their own due diligence before making trading decisions. Enjoy improved trend filtering with the Filtered Percentile Oscillator!
Pine Script® göstergesi
MisinkoMaster tarafından
MACD Standard DeviationMACD Standard Deviation The MACD Standard Deviation is a smoother, volatility-adjusted version of MACD designed to improve signal quality and reduce noise while preserving fast market responsiveness. 🚀 Benefits • Strong performance on assets like BNBUSDT • Faster entries with reduced signal noise • Simple and efficient calculation method • Improved trend clarity compared to classic MACD 💡 Core Idea The objective is to create a cleaner MACD signal by measuring and adapting to its volatility. By accounting for dispersion, the indicator filters weak fluctuations and keeps meaningful momentum moves. ⚙️ How It Works A standard MACD is calculated using selected moving averages. Standard deviation of the MACD is computed over a chosen period. Upper and lower dynamic levels are derived from MACD median and volatility. These adaptive bands help filter false signals and better capture trend direction. The result is a smoother, more stable MACD-based trend tool. 📌 Usage Notes • Crosses around the zero line indicate potential trend shifts. • Expanding band distance suggests rising momentum volatility. • Contracting distance often signals consolidation phases. • Histogram changes help visualize acceleration or weakening momentum.
Pine Script® göstergesi
MisinkoMaster tarafından
Luminous Trend Wave [Pineify]``` Luminous Trend Wave - Hull MA Based Normalized Momentum Oscillator The Luminous Trend Wave (Pineify) is a momentum oscillator designed to provide clear, responsive trend signals while minimizing the lag commonly associated with traditional momentum indicators. By combining Hull Moving Average (HMA) calculations with ATR-based normalization and hyperbolic tangent transformation, LTW delivers a bounded oscillator that works consistently across different assets and timeframes. Key Features Hull Moving Average foundation for reduced lag trend detection ATR normalization for universal applicability across all markets Bounded output range (-100 to +100) using mathematical tanh transformation Dynamic gradient coloring that reflects momentum intensity Built-in signal line for momentum confirmation Automatic alerts for trend reversals and momentum shifts How It Works The indicator operates through a four-stage calculation process: Trend Basis Calculation: The indicator first calculates a Hull Moving Average (HMA) of the closing price. HMA was chosen specifically because it provides significantly less lag compared to Simple or Exponential Moving Averages while maintaining smoothness. This allows the oscillator to respond quickly to genuine price movements. Distance Measurement: The raw distance between the current close price and the HMA trend line is calculated. This distance represents how far price has deviated from its smoothed trend. ATR Normalization: The distance is then divided by the Average True Range (ATR) over the same lookback period. This normalization step is crucial - it makes the oscillator readings comparable across different assets regardless of their price levels or typical volatility. A stock trading at $500 and one at $5 will produce equivalent readings when their relative movements are similar. Tanh Transformation: Finally, the normalized value is passed through a hyperbolic tangent function scaled by a sensitivity multiplier. The mathematical formula (e^2x - 1) / (e^2x + 1) naturally bounds the output between -100 and +100, preventing extreme spikes while preserving the directional information. Trading Ideas and Insights Zero Line Crossovers: When the oscillator crosses above zero, it indicates a shift from bearish to bullish momentum. Conversely, crossing below zero signals bearish momentum. These crossovers can be used as entry triggers when confirmed by other analysis. Overbought/Oversold Levels: Readings above +80 suggest overbought conditions where price has extended significantly above its trend. Readings below -80 indicate oversold conditions. These extremes often precede mean reversion moves. Signal Line Divergence: When the main oscillator (histogram) is above the signal line, momentum is increasing. When below, momentum is decreasing. This relationship helps identify the strength of the current move. Momentum Fading: The indicator automatically fades the color intensity when the oscillator value is closer to the signal line than to the extremes, visually indicating weakening momentum before potential reversals. How Multiple Indicators Work Together LTW integrates three distinct technical concepts into a cohesive system: Hull MA + ATR Integration: The Hull Moving Average provides the trend direction while ATR provides the volatility context. Together, they answer not just "where is the trend?" but "how significant is the current deviation relative to normal market movement?" Mathematical Bounding + Visual Mapping: The tanh transformation ensures readings stay within predictable bounds, while the gradient coloring maps these bounded values to intuitive visual feedback. Strong bullish readings appear in bright green, strong bearish in bright red, with smooth transitions between. Oscillator + Signal Line System: Similar to MACD's relationship between the MACD line and signal line, LTW uses a WMA-smoothed signal line to filter noise and confirm momentum direction. The interplay between the faster oscillator and slower signal creates actionable crossover signals. Unique Aspects Universal Normalization: Unlike many oscillators that produce different reading ranges on different assets, LTW's ATR normalization ensures consistent interpretation whether trading forex, crypto, stocks, or commodities. Sensitivity Control: The sensitivity parameter allows traders to adjust how aggressively the oscillator responds to price changes. Higher values make it more responsive (useful for scalping), while lower values smooth out noise (better for swing trading). Visual Momentum Feedback: The gradient coloring and transparency adjustments provide immediate visual feedback about trend strength without requiring traders to interpret numerical values. How to Use Add the indicator to your chart - it displays in a separate pane below price. Watch for zero line crossovers as primary trend signals. Bullish when crossing above, bearish when crossing below. Use the ±80 levels as caution zones where reversals become more likely. Monitor the relationship between the histogram and signal line - histogram above signal indicates strengthening momentum. Pay attention to color intensity - faded colors indicate weakening momentum and potential reversal zones. Set alerts for automated notifications on trend changes and momentum shifts. Customization Trend Lookback (default: 21): Controls the HMA period. Lower values increase responsiveness but may generate more false signals. Higher values provide smoother trends but with more lag. Signal Smoothing (default: 5): Adjusts the WMA period for the signal line. Higher values create a slower signal line with fewer crossovers. Sensitivity (default: 1.5): Multiplier for the tanh transformation. Increase for more reactive signals, decrease for smoother readings. Colors: Fully customizable bullish and bearish colors to match your chart theme. Gradients: Toggle gradient coloring on/off based on preference. Conclusion The Luminous Trend Wave indicator offers traders a mathematically sound approach to momentum analysis. By combining the low-lag properties of Hull Moving Average with ATR-based normalization and bounded output transformation, LTW provides consistent, interpretable signals across any market. The visual feedback system makes trend strength immediately apparent, while the signal line crossovers offer clear entry and exit timing. Whether used as a standalone tool or combined with price action analysis, LTW helps traders identify trend direction, momentum strength, and potential reversal zones with clarity. ```
Pine Script® göstergesi
Pineify tarafından
Simple EFI + EMASimple Elder Force Index (EFI) with EMA Signal is a minimal momentum indicator that measures buying and selling pressure by combining price change and volume. The raw Force Index is smoothed with an Exponential Moving Average to reduce noise, and an additional EMA signal line helps visualize momentum shifts and trend strength. A zero line is included to quickly distinguish bullish (> 0) from bearish (< 0) conditions. This stripped-down version is designed for clarity and fast decision-making without extra filters or alerts.
Pine Script® göstergesi
danavillanueva tarafından
ROC-WMA bull bear indicatorROC-Weighted MA Oscillator By Ludovic B Modified source code of SeerQuant The ROC-Weighted MA Oscillator (ROCWMA) is a momentum-driven oscillator designed to expose hidden acceleration and deceleration phases in price action by dynamically weighting a moving average with the normalized Rate of Change (ROC). Instead of treating all price deviations equally, this indicator amplifies meaningful moves and suppresses low-energy noise, making it particularly effective in scalping, intraday trading, and momentum reversals. 🔧 Core Concept A base moving average (SMA, EMA, TEMA, DEMA, HMA, ALMA, etc.) Weighted by normalized ROC Transformed into a Z-score oscillator for comparability across assets Smoothed with a signal line for timing precision Result: a context-aware oscillator that adapts to market intensity. 📊 What the Oscillator Shows Bullish momentum when histogram is positive and expanding Bearish momentum when histogram is negative and expanding Neutral zone to filter chop and avoid over-trading Automatic color logic to highlight regime changes Optional candle coloring reflects the active momentum state. 🎯 Signal-Based Price Markers (Advanced Feature) This script includes price-chart markers when: The signal line retraces to X% of the maximum oscillator bar of the current momentum phase AND the signal slope confirms exhaustion (rising or falling) Key characteristics: Adaptive thresholds (relative, not fixed) Separate logic for bullish and bearish phases Reset on each neutral-zone transition Configurable number of markers per momentum cycle This makes the indicator particularly useful for: Pullback entries Momentum fading Timing partial exits ⚙️ Customization Fully adjustable ROC length, MA type, signal length Neutral zone threshold control Multiple color schemes Optional candle coloring Adaptive signal-to-oscillator percentage logic 🧠 Best Use Cases Scalping (M1–M5) Intraday momentum confirmation Pullback and exhaustion detection Cross-asset trading (FX, indices, crypto, metals) ROCWMA is not a lagging oscillator. It is a momentum intensity detector built to reveal when price moves matter.
Pine Script® göstergesi
boudou007 tarafından
ROC-WMA bull bear indicatorROC-Weighted MA Oscillator based on Seequant indicator The ROC-Weighted MA Oscillator (ROCWMA) is a momentum-driven oscillator designed to expose hidden acceleration and deceleration phases in price action by dynamically weighting a moving average with the normalized Rate of Change (ROC). Instead of treating all price deviations equally, this indicator amplifies meaningful moves and suppresses low-energy noise, making it particularly effective in scalping, intraday trading, and momentum reversals. 🔧 Core Concept A base moving average (SMA, EMA, TEMA, DEMA, HMA, ALMA, etc.) Weighted by normalized ROC Transformed into a Z-score oscillator for comparability across assets Smoothed with a signal line for timing precision Result: a context-aware oscillator that adapts to market intensity. 📊 What the Oscillator Shows Bullish momentum when histogram is positive and expanding Bearish momentum when histogram is negative and expanding Neutral zone to filter chop and avoid over-trading Automatic color logic to highlight regime changes Optional candle coloring reflects the active momentum state. 🎯 Signal-Based Price Markers (Advanced Feature) This script includes price-chart markers when: The signal line retraces to X% of the maximum oscillator bar of the current momentum phase AND the signal slope confirms exhaustion (rising or falling) Key characteristics: Adaptive thresholds (relative, not fixed) Separate logic for bullish and bearish phases Reset on each neutral-zone transition Configurable number of markers per momentum cycle This makes the indicator particularly useful for: Pullback entries Momentum fading Timing partial exits ⚙️ Customization Fully adjustable ROC length, MA type, signal length Neutral zone threshold control Multiple color schemes Optional candle coloring Adaptive signal-to-oscillator percentage logic 🧠 Best Use Cases Scalping (M1–M5) Intraday momentum confirmation Pullback and exhaustion detection Cross-asset trading (FX, indices, crypto, metals) ROCWMA is not a lagging oscillator. It is a momentum intensity detector built to reveal when price moves matter.
Pine Script® göstergesi
boudou007 tarafından
ATR-Based Z-Score (with Signal Line)The ATR-Based Z-Score is an advanced, volatility-normalized oscillator designed to identify extreme price deviations more reliably than the standard Z-Score. By replacing the traditional Standard Deviation with the Average True Range (ATR) in the denominator, this indicator eliminates the "volatility paradox" where rapid price spikes cause standard oscillators to prematurely return to zero, even as the price continues to crash. Why this version is superior In a classic Z-Score calculation: Z = (Price - SMA) / (Standard Deviation) A sudden impulsive price drop causes the Standard Deviation to explode. Because you are dividing by a rapidly increasing number, the Z-Score often "rises" while the price is still falling. The ATR-Based Solution: Z = (Price - SMA) / ATR By using a long-period ATR as the denominator, the volatility measure remains stable and "clean." This ensures that the indicator’s troughs align much more accurately with actual price bottoms, staying in the oversold territory until the momentum truly shifts. Key Features Volatility Cleaning: The ATR-normalization prevents the indicator from "flattening out" during impulsive price movements. Integrated Signal Line: A customizable Moving Average of the Z-Score values helps filter noise and confirms entry/exit points. Independent Periods: You can set the Price MA (responsiveness) and the ATR (volatility baseline) separately to fine-tune the indicator to different timeframes. How to Trade with it 1. Mean Reversion (Buy the Dip / Sell the Rip) Long: Wait for the Z-Score to drop below a significant level (e.g., -10.0). Enter when the Z-Score crosses back above its Signal Line. Short: Wait for the Z-Score to rise above +10.0 and enter when it crosses below the Signal Line. 2. Breakout Trading A strong push of the Z-Score beyond the +/- 7.0 levels can indicate a powerful trend breakout. In this case, the Signal Line crossover serves as an effective Exit Signal, telling you that the initial momentum of the breakout is fading. Summary ✅ This indicator is designed for traders who find standard oscillators too "nervous" during volatile periods. By decoupling price deviation from immediate variance spikes, the ATR-Based Z-Score provides a rock-solid foundation for identifying true market extremes and high-probability reversal points.
Pine Script® göstergesi
muth96 tarafından
Trend-cycle reversion (multi-timeframe)Trend-cycle reversion (multi-timeframe) is a mean-reversion “stretch” gauge built around a simple idea: price often deviates from its recent path (trend + dominant swing rhythm), and those deviations become more actionable when you scale them by volatility and express them as a standardized score. This script models the last N bars as: 1) a linear trend (to capture drift), plus 2) a single dominant cycle (to capture the most prominent oscillation inside the same window). It then measures how far current price is from the model’s next-bar projection, normalizes that distance by ATR (volatility), and finally converts the result into a rolling Z-score. The output is displayed as a multi-timeframe dashboard so you can see “stretch vs. fit” across several time compressions at once. ------------------------------------------------------------ What you see on the chart ------------------------------------------------------------ The indicator draws a table (overlay) with up to 12 rows (configurable), one per timeframe from your CSV list. Each row shows: • TF: The timeframe being evaluated (e.g., 1, 5, 15, 60, 240, D). • Z: The current Z-score of the volatility-scaled model gap on that timeframe. • State: A simple interpretation using your Z threshold: - “Short ▼” when Z > +threshold (price is extended above the model path) - “Long ▲” when Z < −threshold (price is extended below the model path) - “Hold •” when inside the band (not unusually stretched) Colors follow the same logic: red for high positive Z, green for high negative Z, gray when neutral or unavailable. Important: “Long/Short” here describes the direction of mean-reversion pressure (over/under the fitted path), not a complete trading system by itself. ------------------------------------------------------------ How it works (plain-English math) ------------------------------------------------------------ 1) Optional log transform If “Fit on log(price)” is enabled, the model runs on log(price) instead of raw price. This is often useful for markets that behave multiplicatively (large percentage moves, long-term exponential growth), because distances become closer to “percent-like” rather than absolute dollars. 2) Trend fit (linear regression in the window) Over the last Window Length bars, the script estimates a straight-line trend. Think of this as the baseline path that best explains the window if you ignore swings. 3) Cycle search (best period by least-squares error) After removing the linear trend, the script searches for a single sinusoidal cycle period between: • Min Period and Max Period (in bars), stepping by Period Step. For each candidate period, it computes the best-fitting sine+cosine components and measures the remaining error (SSE). The period with the smallest SSE is selected as the “best” cycle for that window. To reduce recalculation cost and to keep the chosen cycle from flapping every bar, the script re-runs this period search only every “Re-search best period every N bars”. Between searches, it keeps using the last best period. 4) Next-bar projection and “gap” Using the fitted trend + fitted cycle, the script projects the model value one bar ahead (relative to the window indexing). It then computes: gap = (current value) − (projected value) If “Invert sign” is enabled, the gap is multiplied by −1. This doesn’t change magnitude, it only flips interpretation (useful if you prefer the opposite sign convention). 5) Volatility scaling via ATR The raw gap is divided by ATR to make it comparable across symbols and regimes. If you are fitting on log(price), ATR is also computed in log space using a log-based true range, then smoothed similarly (so the scale is consistent). This produces a “gap in ATR units”. 6) Z-score standardization Finally, the script computes a rolling Z-score of the ATR-scaled gap over “Z-score length”: Z = (gapATR − mean(gapATR)) / stdev(gapATR) This is what appears in the table. The Z-score answers: “How unusual is today’s model deviation compared to the last Z-score length observations?” ------------------------------------------------------------ How to interpret the Z-score ------------------------------------------------------------ Z near 0: Price is close to the model path relative to recent volatility (nothing unusual). Z above +threshold: Price is meaningfully ABOVE the fitted path (stretched up). This can be read as elevated downside mean-reversion pressure — but it can also persist during strong trends. Z below −threshold: Price is meaningfully BELOW the fitted path (stretched down). This can be read as elevated upside mean-reversion pressure — but it can also persist during fast selloffs. A practical way to use this indicator is to treat it as a “context filter” or “risk tool”: • Fading extremes: look for mean-reversion setups when Z is beyond the threshold and price action confirms (e.g., momentum stalls, structure breaks, volatility contraction/expansion cues). • Trend-aware reversion: only take “reversion” signals in the direction permitted by your separate trend filter (higher-timeframe trend, moving average regime, market structure, etc.). • Take-profit / risk management: in a trend-following strategy, extremes can be used as partial profit zones or as “don’t chase here” warnings. ------------------------------------------------------------ Multi-timeframe (MTF) notes ------------------------------------------------------------ Each table row is computed with request.security() on that timeframe with no lookahead, so it is not using future bars to form the value. However, like any live indicator, the value for an actively forming bar can change until that bar closes (especially on the lower timeframes). Also, higher-timeframe rows update when that higher-timeframe bar updates/closes. ------------------------------------------------------------ Inputs (what to change first) ------------------------------------------------------------ If you only change a few settings, start here: • Window Length: Controls how much history the model uses. Larger = smoother/stabler, but slower to adapt. • Min/Max Period + Step: Controls the cycle search range and granularity. - Wider ranges can capture more possibilities but cost more computation. - Smaller steps can find a closer match but also cost more. • Re-search every N bars: Higher = faster performance and more stability; lower = more adaptive but can be noisier. • ATR length (scale gap): Controls the volatility scale. Shorter reacts faster to volatility changes; longer is steadier. • Z-score length: Controls how “rare” extremes are. Longer lengths make Z more stable, but require more history and adapt slower to regime shifts. • Z threshold: Defines when the table labels “Long/Short”. Common choices are 1.5–2.5 depending on how selective you want extremes to be. • Timeframes (CSV) + Max table rows: Controls what you see in the dashboard. ------------------------------------------------------------ Limitations and expectations ------------------------------------------------------------ This is a single-cycle, windowed model. Markets can be multi-cycle, non-sinusoidal, or structurally shifting; in those cases the “best period” is simply the best approximation inside the window, not a guarantee of a true underlying rhythm. Z-score extremes are not automatic reversal calls. In strong trends or during volatility shocks, Z can stay extreme longer than expected. Use this as a measurement tool, then combine it with your own confirmation and risk management. This indicator is for analysis/education and does not provide financial advice.
Pine Script® göstergesi
Tradenometry tarafından
Green Trend, Red Chop Zone [rambijey]This indicator offers a fresh perspective on the classic ADX. Instead of looking at the absolute ADX value, it focuses on the ADX Slope (Velocity). The goal is to visually filter out market noise (Chop) and pinpoint exactly when a trend is accelerating. The 4 Market Phases: 🟢 Green (Strong Bullish): ADX is rising fast, and Bulls are in control (+DI > -DI). 🔴 Red (Strong Bearish): ADX is rising fast, and Bears are in control (-DI > +DI). 🟡 Yellow (Neutral): ADX is flat or moving slowly. Transition phase. ⚪ Gray (Chop Zone): ADX is falling rapidly. The trend is dying, leading to consolidation or ranging markets. Usage Tips: Avoid trading during Gray zones to prevent whipsaws. Look for entries when the histogram bursts into Green or Red, indicating a fresh surge in trend strength.
Pine Script® göstergesi
JeoffreyRambinintsoa tarafından
RSI Level Candles [fmb]RSI Level Candles What it is RSI Level Candles is a minimal, high-signal overlay that keeps your attention on price. It paints candles by RSI regime and adds tiny edge dots to highlight extreme momentum. The design goal is speed and clarity with no clutter. Why it was built Most RSI tools sit in a separate pane and introduce noise with extra lines, labels, and overlapping thresholds. This indicator moves the information onto price itself. You see regime directly on the candles and only the most important alerts when RSI is in extreme territory. What it does Candles change color according to RSI. Above the neutral high (default 60) they turn green. At the high extreme (default 70, or 80 if you prefer) they turn lime. Between 40 and 60 you may show a soft yellow neutral band or leave candles unpainted. Below the neutral low (default 40) candles turn red, and at or below the low extreme (default 30, or 20 if you prefer) they turn maroon. The indicator also prints small dots at the top and bottom of the pane to spotlight extremes. A green dot appears at the top on any bar with RSI at or above the high extreme. A red dot appears at the bottom on any bar with RSI at or below the low extreme. How this helps You get an instant read on momentum regime without leaving the price chart. Extremes are easy to spot which helps manage chase or exhaustion risk. The neutral band behavior helps distinguish trend days from range days and supports cleaner add or trim decisions within an existing trend. Best practices Treat 60 and 40 as momentum gates. Above 60 favors a long bias and additive entries on pullbacks. Below 40 favors a defensive posture on longs or a short bias. Use extremes for management rather than automatic reversal calls. In strong trends RSI can remain extreme for extended periods. Look for a change in market structure or a clear reclaim of 60 or 40 before shifting bias. Combine this overlay with simple structure and trend filters such as support and resistance, a 20 or 50 period moving average, and volume or volatility context. Inputs You can set RSI source and length, choose neutral low and high, and choose extreme low and high. The neutral band can be shown in soft yellow between 40 and 60 or turned off entirely. You can also toggle candle painting on or off if you only want the extreme dots. Reading the colors Lime indicates the extreme bullish zone. Green indicates bullish momentum. Yellow indicates the optional neutral band. Red indicates bearish momentum. Maroon indicates the extreme bearish zone. A small green dot at the top means the bar is in the high extreme. A small red dot at the bottom means the bar is in the low extreme. Use cases For trend following, stay aligned with the prevailing regime while avoiding overreactions to small fluctuations. For swing entries, buy pullbacks while RSI holds above 40 in uptrends, and fade bounces that stall under 60 in downtrends. For risk control, trim strength that pushes into extremes and stalls, then re-add on momentum reclaims. Limitations RSI measures momentum, not direction by itself. Do not use it in isolation. Extremes can persist during strong trends, so wait for structure or momentum re-tests before changing bias. Very illiquid symbols can create noisy signals. Notes Dots are designed to appear on every bar that sits inside the extreme zones. If you prefer single entry dots, change the logic to look for crosses rather than conditions. There is no separate RSI pane, no text labels, and no cross markers. The objective is simplicity and speed.
Pine Script® göstergesi
Fullymobile tarafından
BTC/M2 Fire Sniffer (Liquidity Range Z-Score)Howdy Fella. Great to see you here, exploring the true data in CRYPTOCAP:BTC analysis. To ensure a perfect view on the markets, here are a few tips on how to fine tune the Fire Sniffer: - Z-Score Lookback: 40 - Liquidity Ratio SuperSmoother Length: 8 - Z-score SuperSmoother Length: 132 Set the ranges as following: Mean: -0.53 Liquidity Cycle Top: 0.8 Liquidity Cycle Bottom: -0.65 With that, you are set to go. Enjoy and make sure to let me know your thoughts on the script. You can contact me on X: @thebitcoinfrontier
Pine Script® göstergesi
CL24 tarafından
EMA Crossover Arrows (6 EMA & 20 EMA)EMA Crossover Arrows (6 EMA & 20 EMA) - Quick Signal Detector 📊 OVERVIEW A simple yet powerful indicator that automatically marks exact moments when the 6 EMA crosses the 20 EMA - giving you clear visual signals for potential trend changes without any chart clutter. 🎯 WHAT IT SHOWS Two precise crossover signals: - Blue Triangle Up (↑): 6 EMA crosses ABOVE 20 EMA (Bullish signal) - Pink Triangle Down (↓): 6 EMA crosses BELOW 20 EMA (Bearish signal) ✨ KEY FEATURES ✓ Clean arrow markers appear only at crossover moments ✓ No lag - signals appear in real-time as crossovers occur ✓ Works on ANY timeframe (1min, 5min, 1H, daily, etc.) ✓ Non-intrusive - arrows don't clutter your chart ✓ Perfect for swing trading and trend following ✓ Zero configuration required ⚙️ TECHNICAL DETAILS - 6 EMA: Fast-moving average for quick trend detection - 20 EMA: Slower average providing trend confirmation - Crossover detection uses Pine Script's built-in ta.crossover/crossunder functions - No repainting - signals are final once the bar closes
Pine Script® göstergesi
jhor_10 tarafından
Market Breadth MomentumThe indicator operates by fetching data from external tickers (usually market internal symbols like ATHI and ATLO) and processing them through a momentum filter. It aims to identify "breadth thrusts" or exhaustion points before they become obvious on a standard price chart. Key ComponentsCustom Data Inputs: By default, it uses New Highs and New Lows tickers. You can toggle between calculating the Net difference (Highs minus Lows) or a Ratio (Highs divided by Lows). Dual Mode Logic:Raw Mode: Visualizes the raw spread between highs and lows.Momentum Mode: Applies a McClellan-style calculation (Fast EMA minus Slow EMA) to show the rate of change in market breadth.Signal Line: Includes a 9-period EMA (Signal Line) to help identify trend shifts and provide crossover alerts. Visual InterpretationThe indicator is displayed in a separate pane below the price chart:ElementDescription Teal ColumnsIndicate that the breadth momentum is increasing (bullish divergence or strengthening trend). Maroon Columns Indicate that the breadth momentum is decreasing (bearish divergence or weakening trend).Orange LineThe Signal Line; used to smooth out noise and provide entry/exit triggers.Zero LineThe "neutral" mark. Values above zero generally suggest bullish internal health; values below suggest bearish. Identifying Divergences If the S&P 500 is making new price highs, but the Breadth Momentum histogram is making lower highs, it suggests the rally is losing participation. This is often a precursor to a market correction. Momentum Crossovers A common signal is the "Signal Line Cross." When the columns cross above the orange Signal Line, it indicates a short-term surge in market participation (a "Thrust"). Mean Reversion Extreme extensions away from the Zero Line (either positive or negative) can signal that the market is overbought or oversold on an internal level, regardless of what the price action looks like. Settings & Inputs New Highs/Lows Ticker: Ensure these match the symbols provided by your broker (e.g., HI_NY or ATHI). Fast/Slow EMA: Standard settings are 19 and 39 (McClellan defaults), but these can be tightened for faster scalping or widened for long-term trend following. Show Momentum: Toggle this off if you simply want to see the raw "Net Highs" data without the EMA smoothing.
Pine Script® göstergesi
tommyttcat tarafından
Dual-Scale MACDDual-Scale MACD is a dual-timeframe momentum indicator that displays a scaled short-term MACD together with a long-term MACD in the same pane. The short-term MACD can be amplified by a configurable scale ratio, allowing its momentum structure to be visually aligned with the long-term MACD. All EMA parameters are fully configurable, making this indicator suitable for experimentation with multi-cycle momentum resonance. Features Two independent MACD systems (short-term + long-term) Fully configurable EMA parameters Adjustable scale ratio for visual alignment Clean histogram + top-layer signal line Use cases Multi-cycle momentum comparison Trend confirmation & divergence analysis Studying MACD resonance across time scales This indicator is intended for analytical and educational purposes.
Pine Script® göstergesi
flyingcow8 tarafından
Apex Wallet - Adaptive Commodity Channel Index (CCI) & HTF TrendOverview The Apex Wallet Commodity Channel Index (CCI) is a professional-grade momentum oscillator designed to identify cyclical trends and overbought/oversold conditions with an integrated trend-filtering engine. This script enhances the classic CCI by adding multi-timeframe trend analysis and adaptive calculation modes. Adaptive Trading Presets The indicator automatically recalibrates its internal periods based on your selected Trading Mode: Scalping: Uses fast-response settings (CCI 14, Signal 6, Trend 50) for lower timeframes. Day Trading: Standard balanced settings (CCI 20, Signal 9, Trend 100). Swing: Long-term filters (CCI 34, Signal 14, Trend 200) to capture major market waves. Key Features: Higher Timeframe (HTF) Trend Bias: Optional background shading based on a customizable Higher Timeframe (e.g., 1H trend while trading on 5m) to ensure you always trade in the direction of the "Big Picture". Market Trend Coloring: The CCI Signal line dynamically changes color (Green/Red/Gray) based on local market momentum relative to its moving average. Visual Clarity: Features standard CCI level bands (+100, 0, -100) with professional aesthetics for easy reading. How to Use: Select your preferred Trading Mode in the settings. Enable HTF Background to visualize the dominant trend from a higher timeframe. Look for CCI crosses or signal line color changes while the background confirms the overall market bias.
Pine Script® göstergesi
Apex-Wallet tarafından
Stock ScreenerMissing great trade opportunities is annoying, and unless you have 12 screens or only trade one market, you are missing a lot of trades. To fix that, we created this stock screener so you get notified instantly of potential great trading conditions in real time, right on your chart. You get notified of trading benchmarks being met by the value being displayed on the scanner as well as a color change so that it grabs your attention and makes you aware that you should take a look at the other market and look for a potential trade. It also has built in alerts so you can have an alert notification go off when any of your trading conditions are met instead of needing to watch the scanner for color changes. The screener will change the ticker symbol background color to red green when price is above or below the previous daily range and above or below both VWAPs. This signals that the ticker is trending, which typically means it is a great time to trade that market and follow the trend. This stock screener allows you to scan up to 10 different markets at the same time for various different conditions so you always know what is going on with your favorite trading symbols. If you want to scan more tickers, just add the indicator to your chart again and change the table position to the other side of the screen and update the tickers on the 2nd screener, allowing you to have 20 tickers at a time. The scanner can be fully customized by changing the markets that it screens and turning on or off as many of them as you would like. You can also turn on or off any of the different data sets so that you only get information about trading conditions that matter to you. The screener can provide data on any type of market, such as stocks, crypto, futures, forex and more. Each ticker can be adjusted to whatever market you would like it to scan for data in the settings panel, the only limitation is that it will not provide data for the VWAP and volume trend score if the ticker you are screening does not provide volume data. Screener Features The scanner will provide the following types of data for each ticker that is turned on: Volume - Provides a volume score compared to the average volume and notifies you of higher than normal volume and volume spikes on individual bars by changing colors. Volatility - Provides a volatility score compared to the average volatility and notifies you of higher than normal volatility by changing colors. Oscillator - Choose between the RSI or CCI. The value of that oscillator will be displayed and will notify you when values are in extreme ranges such as overbought or oversold conditions according to the threshold values you enter in the settings panel. When those thresholds have been breached, you will be notified by it changing color. Big Candles - Compares the current candle to average previous candle sizes, and changes color to notify you of big candles including a big top wick, big bottom wick, big candle body and big candle high to low range. Daily Level Touches & Trends - Calculates and displays various daily candle and intraday open price levels that act as support and resistance. Notifies you when price is touching any of the daily levels that are turned on. The levels you can have on are as follows: previous day high, previous day low or previous day open. It also will notify you when price is touching the current day’s open, NY 930am open, Asia 8pm open, London 2am open and NY midnight 12am open. It will also say “Above” if price is above the previous day’s high or it will say “Below” if price is below the previous day’s low. The color of the cell will also change when a level touch is happening or price is above the previous day high or below the previous day low. VWAP - Choose from 2 different VWAP lengths, default settings are daily and weekly VWAPs. You will get notified if price touches either of the VWAPs and they will also say “Above” or “Below” if price is currently above or below each VWAP. How To Use The Screener To Help You Trade The main purpose of the screener is to scan other markets and notify you of potential good trading opportunities such as price bouncing off of the daily levels or VWAPs. It can also be used to know when price is trending according to the VWAPs and daily levels. Lastly, you can use it to know how the volume and volatility trends are currently which gives you more confidence in taking a trade with this data when volume and volatility are present. Volume Score When volume is high, this represents a good time to trade because there are many market participants and price is likely to be volatile while there is high volume which can present a lot of good trade setups for you to take. The volume score shown on the screener measures the current volume trend compared to previous volume trends and calculates that into a score based on 100 being the same as the previous volume trend. So any value above 100 means it is high volume and any value less than 100 means it is lower volume than normal. In the settings panel, you can adjust the volume threshold that needs to be met for a volume notification to show up. The default setting is at 120, so you will get notified when the current volume trend score is 120 or higher or you can adjust that threshold value to whatever value you prefer. It also will notify you when there is a volume spike on the current bar. This is determined by calculating an average of the recent volume totals and then checking to see if the current bar is greater than or equal to that average multiplied by 3. So if a single bar has volume that is greater than 3 times what the average volume is, then you will get a notification that says “Spike” to make you aware of that volume spike. The volume trend threshold, volume spike multiplier and lookback length for the average volume used in volume spike calculations can all be adjusted in the settings panel to fit your desired preferences. Volatility Score High volatility can mean it is a great time to trade because the market is moving quickly and providing large enough movements that you can get in and out in a short amount of time, while still accruing decent sized trade PnL. The volatility score will calculate the current volatility for each market compared to previous conditions and then divide the current volatility by the average volatility to give you a volatility score. Anything over 100 means the market is decently volatile and you should look at that market to find potential trade setups to execute on. Anything below 100 means the market is not very volatile and it is usually best to just wait until volatility returns before you start trading again. The screener will notify you when the volatility score is above the threshold you set. The default value is set to 90, but can be adjusted to your preference. Pay attention to any market that shows an alert and take a look at that chart because the high volatility may present a good trade setup for you in the near future. Oscillator Score The oscillator data can be switched between Relative Strength Index(RSI) and Commodity Channel Index(CCI). The RSI provides a value between 0 and 100 that indicates the momentum and strength of the recent price action. Many traders use the extremes of the 0-100 range to signal overbought or oversold conditions and use that as a sign to look for price to reverse in the near future. The typical values used for this and the default settings to provide notifications are: 70 for overbought and 30 for oversold. The scanner will notify you when the RSI value is considered overbought or oversold so you know to take a look at the chart and analyze if it is ready for a trade to be taken. The CCI provides a value that can be used to determine the trend strength of the underlying asset when the oscillator moves above 100 or below -100. These extreme values are outside of the normal accumulation range and signify that price is moving strongly in that direction so it may be a good time to take a trade in the direction of the trend. The scanner will show you the value of the CCI for each market and notify you if that value is above 100 or below -100. Both RSI and CCI settings can be adjusted in the settings panel to your desired settings so you have the exact oscillator settings you prefer to use as well as the exact values that you want to use for being notified. Big Candles Big candles can mean that many traders are buying or selling at the same time and many times indicate a good signal to trade in that same direction. That is why we included this calculation in the screener, so you are always aware when a large candle prints. It calculates the average size of the recent candles and then uses that average as the benchmark to determine if the current candle is considered big and worthy of notifying you to take a look at that chart. You can adjust the multiplier used for the big candle threshold to whatever you desire, but the default setting is 3 which means the candle will be considered big and notify you if it is 3 times as large as an average candle. The big candles data will track the following candle values and notify you with these labels: High to Low candle size = HL Candle Body from open to close candle size = OC Top Wick size = TW Bottom Wick size = BW Daily Level Touches & Trend Daily level touches are excellent levels to watch for price to bounce because they often act as support and resistance levels for intraday trading. The scanner will track each market and notify you when the current candle is touching any of the daily levels that you have turned on in the settings panel. The main levels that are turned on by default and are useful for all markets and how they will be labeled on the scanner are as follows: Previous Day High = High Previous Day Low = Low Previous Day Open = < Open Previous Day Close = Close Current Day Open = Open We also included some extra levels that are useful for futures traders. They are as follows: NY 930am Open = 930am NY 12am Midnight Open = 12am Asia Open at 8pm NY time = Asia London Open at 2am NY Time = London Watch how price reacts to these levels and then trade the bounces off of these levels if the price action confirms that it is going to respect that level. When price is currently above the previous day high, the scanner will say “Above” and show a green color, indicating a bullish trend and that price is above the previous daily candle’s high. When price is currently below the previous day low, the scanner will say “Below” and show a red color, indicating a bearish trend and that price is below the previous daily candle’s low. Pay attention to when price is trending above or below the previous daily candle as those trends can provide excellent trend trading opportunities. The daily levels that you have turned on in the settings will also show as lines on the chart and include a label next to them, identifying each level so you know what each line represents. You can turn on or off all of the lines shown on the chart in the main settings or turn them off one by one in the style panel of the settings. Labels can also be turned on or off for all of the lines in the main settings panel. You can adjust the label positioning in the Label Offset section of the settings panel. VWAP Touches & Trend VWAP stands for volume weighted average price and is a very popular tool that traders use to determine trend direction based on volume as well as an excellent level to trade price bounces off of. The typical VWAP time period used is Daily, which means the volume weighted average price will reset at the beginning of a new day. We set the first VWAP to be the daily VWAP by default and the second one to be the weekly VWAP. You can adjust both of the time periods to be any of the provided time lengths that you choose. The screener will show “Above” with a green background color when price is above the VWAP, indicating a bullish trend. It will show “Below” with a red background color when price is below the VWAP, indicating a bearish trend. When both VWAPs are showing Above or Below, you can expect price to trend in that direction, so look for pullbacks you can trade in the direction of the trend. If the VWAPs are showing different directions, then you should expect to bounce back and forth between the VWAPs, but be careful and watch out for price to break beyond either one and start a trend. When the current candle is touching the VWAP, the scanner will change colors and say VWAP to notify you that price is touching the VWAP and you should look at that chart and analyze the market for a potential bounce off of the VWAP to trade. Trending Market Signals Strong trends are excellent markets to trade and can many times provide excellent trading opportunities that don’t require expert price action reading skills to be able to take winning trades from. That is why we included a signal to notify you of a strong trending market. The strong trending market will show up as a green or red background color for the ticker name. If the color of the ticker name is green, it is notifying you that the price is above the previous daily high, above VWAP 1 and above VWAP 2 and is a good market to look for bullish trend trades. If the color of the ticker name is red, it is notifying you that the price is below the previous daily low, below VWAP 1 and below VWAP 2 and is a good market to look for bearish trend trades. Changing The Tickers It Scans To change the tickers that the indicator scans, scroll near the bottom of the settings panel and select the ticker symbol you want to update and then search for the exact symbol you want to use. If you want to scan less tickers, then just turn some of the tickers off that you don’t need. Scanning More Than 10 Tickers If you want to scan more than 10 tickers, you can add the scanner to your chart again and then just change the table position to the other side of the screen. This will allow you to scan 10 more tickers that will show up separately. Then if you want even more, just add the indicator to your chart again and update the table position until you have as many markets as you want. The table position setting can be found at the bottom of the main settings panel. Alerts The screener has alerts that can be used to notify you when any of the data set thresholds have been met or if price is touching one of the levels. You can set alerts for the following events: Bullish Trend Alert - Price is above the previous daily high and above both VWAPs. Bearish Trend Alert - Price is below the previous daily low and below both VWAPs. High Volume Alert - Volume is higher than the threshold or a volume spike is detected. High Volatility Alert - Volatility is higher than the threshold. Oscillator Is Extended Alert - Oscillator value has exceeded the upper or lower threshold. Big Candle Alert - A big candle has been detected. Daily Level Touch Alert - One of the daily levels that is turned on is being touched. VWAP Touch Alert - One of the 2 VWAPs are being touched. An alert will trigger when any one of tickers on your scanner meets the alert conditions, so when you see the alert, you will need to go to your chart and look at the scanner to see which ticker it was and then navigate to that chart to look for potential trade setups. The alerts will use the exact same settings you have configured in the settings panel to send you alert notifications. With normal settings, this could give you a lot of alerts, so if you only want alerts to fire when abnormal conditions are being met, try setting up a second screener on your chart that has very high threshold values and only has the most important level touches on. Then turn the setting "Do Not Show The Screener On The Chart" to off so the calculations will still run and fire alerts, but won't clog up your charts. This way you can only get alert notifications when major events happen but still have your normal screener settings available on your chart. Markets This Can Be Used On This screener uses the price action and volume data so you can use it to scan any type of market you would like as long as the ticker you are scanning has price and volume data feeds. If a market does not have volume data, then it will just show NaN in the volume row and the VWAP rows will not show anything.
Pine Script® göstergesi
FriendOfTheTrend tarafından