Şimdi başlat

Candlestick analysis

StockRadar - Gap Trading SystemStockRadar – Gap Trading System StockRadar – Gap Trading System is a visual gap-detection and gap-trading helper for TradingView. It identifies significant price gaps, tracks how they evolve over time (unfilled, partially filled, fully closed, or time-limited), and simulates a structured gap-fill trade plan with configurable entry, stop-loss and take-profit logic. The goal is to help you spot high-quality gap opportunities faster and review historical performance directly on the chart. What it does Detects relevant gaps based on a minimum deviation threshold and plots them as clear, color-coded gap boxes. Monitors each gap’s lifecycle and marks whether it stays open, gets partially filled, fully closed, or is closed by a time limit (optional). Simulates a trade setup per gap using: a configurable Trade Entry Trigger a configurable Risk/Reward ratio a configurable Take-Profit at Gap Close (%) Visualizes the setup and outcome with entry/exit markers, SL/TP levels, and profit/loss labels. Key features Gap Visualization Color-coded boxes for open / partial / fully closed / time-limited gaps Optional remaining gap size (%) display Adjustable border and fill transparency Pre-entry vs active-trade shading inside the gap box for better readability Trade Simulation & Chart Markings Trade Entry Trigger: Candle Close (more conservative) Wick Touch (more aggressive) Stop-Loss & Take-Profit lines drawn for all relevant gaps (not only the newest ones) Optional “SL” / “TP” labels on the lines (menu toggle) Entry vertical line inside the gap box to show where the trade became active Trade result labels including profit/loss in % for completed trades High-Probability Alerts (⚡) Discrete ⚡ icon displayed inside the top-left corner of the gap box for high-probability setups (toggleable) Uses historical performance context (win rate / break-even logic) to support more selective alerts Dashboard (On-Chart Panel) Clear PROFITABLE / NOT PROFITABLE / INSUFFICIENT DATA status based on win rate vs break-even and sample size Shows key stats and (optional) trend speed analysis “Data since” field to display the earliest evaluated gap date for transparency Position Sizing Calculator (Optional) Toggleable Position Sizing section Input your available capital and risk % per trade Calculates suggested share quantity (rounded down) for the latest high-probability setup Displays entry price, position value, currency, and highlights when capital is insufficient Who it’s for This indicator is designed for traders who work with gap-fill behavior and want: fast and consistent gap identification, structured trade levels (entry/SL/TP), clean historical review of outcomes, and an at-a-glance dashboard summary without leaving the chart. Notes / Disclaimer This script is a charting and analysis tool, not financial advice. Always validate signals with your own risk management and market context. Past performance statistics are informational and do not guarantee future results.
Pine Script® göstergesi
StockradarAI tarafından
TCR by AMAGADON TCR - THREE CANDLE RULES The Methodology TCR (Three Candle Rules) is a systematic confirmation indicator developed to solve the problem of "False Breakouts." Many traders lose capital by entering as soon as price touches a level; TCR eliminates this by enforcing a Two-Candle Validation rule. The algorithm identifies a session-based range and requires price to "prove" its strength by holding outside that range for two consecutive candles before a signal is issued. How the TCR Logic Works: Zone Identification: The script anchors to the high and low of the session start (Asia, London, or NY). Validation (The Rule): For a BUY: Two consecutive M15 candles must both Open and Close entirely above the session high. For a SELL: Two consecutive M15 candles must both Open and Close entirely below the session low. The Trigger Box: Once validated, a Blue (Buy) or Red (Sell) box is drawn. The 50% (Midpoint) of the trigger candle becomes the high-probability entry zone. STRICT FOREX RISK DISCLOSURE ⚠️ HIGH-RISK WARNING: Trading Foreign Exchange (Forex) involves a high level of risk and may not be suitable for all investors. The high degree of leverage can lead to the loss of your entire investment. Only trade with money you can afford to lose. NO FINANCIAL ADVICE: TCR - THREE CANDLE RULES is a technical analysis tool for educational and informational purposes only. It does not constitute financial or investment advice. LIMITATION OF LIABILITY: No Accuracy Guarantees: Mathematical patterns do not guarantee future results. Execution Risks: The author is not responsible for losses due to market volatility, news spikes, or broker slippage. User Responsibility: By using this script, you acknowledge that all trading decisions are yours alone. The author is not liable for any financial damages
Pine Script® göstergesi
Aamagadon tarafından
TSS by AMAGADONTSS - THE SESSION SETUP The Methodology THE SESSION SETUP (TSS) is a price-action framework that utilizes session-specific volatility to define intraday expansion zones. By isolating the opening ranges of the Asia, London, and New York sessions on the 15-minute (M15) timeframe, TSS identifies clear institutional "interest zones." The algorithm monitors these ranges for two specific price-action events: Primary Breakouts: Decisive candle closes outside the session boundaries. Liquidity Reversals (Counter-Signals): Identification of "fake-outs" where price traps initial breakout traders before reversing through the entire session range. Features Automated Session Boxes: Dynamic range calculation for all major global sessions. Precision TP Levels: Systematic profit targets based on the measured session range (R). Timeframe Integrity: Built-in guard to ensure the logic is only applied to the M15 timeframe, preserving the accuracy of the range calculations. Visual Median: Dotted mid-lines to identify the "mean" price within a session. CRITICAL DISCLOSURE - PLEASE READ CAREFULLY HIGH RISK INVESTMENT WARNING: Trading Foreign Exchange (Forex) is highly speculative, carries a high level of risk, and may not be suitable for all investors. You may sustain a loss of some or all of your invested capital; therefore, you should not speculate with capital that you cannot afford to lose. NO FINANCIAL ADVICE: The TSS - THE SESSION SETUP indicator is a technical analysis tool provided for informational and educational purposes only. It does not constitute investment advice, financial advice, or a recommendation to buy or sell any currency pair or financial instrument. LIMITATION OF LIABILITY: Execution Risk: The author does not guarantee the accuracy of signals. Market conditions, including news-driven volatility, spreads, and slippage, can result in trades that differ significantly from the indicator's visual signals. Backtesting Limitation: Past performance and historical signals are not indicative of future results. User Responsibility: You are solely responsible for your trading decisions. The author of this script shall not be held liable for any loss or damage, including without limitation, any loss of profit, which may arise directly or indirectly from the use of or reliance on this tool. BY USING THIS SCRIPT, YOU AGREE THAT YOU ARE TRADING AT YOUR OWN RISK.
Pine Script® göstergesi
Aamagadon tarafından
Koma-Indikator v2272,19 USD +0,35 +0,13% Apple, Inc. engages in the design, manufacture, and sale of smartphones, personal computers, tablets, wearables and accessories, and other varieties of related services. It operates through the following geographical segments: Americas, Europe, Greater China, Japan, and Rest of Asia Pacific. The Americas segment includes North and South America. The Europe segment consists of European countries, as well as India, the Middle East, and Africa. The Greater China segment comprises China, Hong Kong, and Taiwan. The Rest of Asia Pacific segment includes Australia and Asian countries. Its products and services include iPhone, Mac, iPad, AirPods, Apple TV, Apple Watch, Beats products, AppleCare, iCloud, digital content stores, streaming, and licensing services. The company was founded by Steven Paul Jobs, Ronald Gerald Wayne, and Stephen G. Wozniak in April 1976 and is headquartered in Cupertino, CA. Es sind noch 14 Min. für die Script-Bearbeitung übrig in dieser Minute Koma-Indikator v2 Zu Favoriten hinzufügen Auf Chart verwenden 0 0 Functional Overview: Koma-Indikator V2 This indicator is a specialized analytical tool for Smart Money Concepts (SMC) trading. It is designed to automatically identify trend reversals, liquidity pools, and order flow shifts within the chart. 1. Liquidity Identification (BSL/SSL) Major Range: The script automatically calculates significant highs and lows based on the "Major Lookback" period. Buy-Side & Sell-Side Liquidity: These levels are plotted as red (BSL) and green (SSL) lines, serving as primary targets where the market often "hunts" for liquidity. 2. Sweep Detection (Liquidity Grabs) The indicator detects when the price briefly exceeds a major high or low but closes back within the range. Visuals: These potential reversal points are marked with an "X" icon above or below the candle (Sweep H/L). 3. Automated Market Structure Shifts (MSS) The core logic tracks direction changes on two distinct levels: Major MSS (Bold Yellow Line): Signals a significant trend reversal following a liquidity sweep. This is the primary confirmation for a new trend. Minor MSS (Dotted Yellow Line): Highlights smaller structural breaks within a trend—ideal for aggressive "Sniper" entries on lower timeframes. 4. Dynamic Fair Value Gaps (FVG) & iFVGs FVG Recognition: The indicator automatically draws boxes for bullish (green) and bearish (red) price imbalances. Change in Delivery (iFVG): When a price candle closes through an existing FVG box, the box turns gray. This signals an Inverted FVG (iFVG), indicating that the order flow has officially shifted in the new direction. 5. Customization (Inputs) Sensitivity: Users can adjust the lookback periods for both Trend (Major) and Entries (Minor) to suit different assets or timeframes. Visual Hierarchy: All colors, line widths, and box lengths are configurable to maintain a clean and professional chart layout. Trading Application: By automating the "grunt work" of structural analysis, this tool allows you to focus on the trade execution: Locate Liquidity: Identify BSL/SSL lines. Watch for the Sweep: Look for the "X" marks. Confirm the Shift: Wait for the yellow MSS lines. Execute via Order Flow: Use the gray iFVG boxes as your Point of Interest (POI). Geschütztes Skript Dieses Script ist als Closed-Source veröffentlicht. Sie können es kostenlos und ohne Einschränkungen verwenden – erfahren Sie hier mehr. Phantomas1 Haftungsausschluss Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen. Skript bearbeiten Minimieren Schließen Koma-Indikator v2 Functional Overview: Koma-Indikator V2 This indicator is a specialized analytical tool for Smart Money Concepts (SMC) trading. It is designed to automatically identify trend reversals, liquidity pools, and order flow shifts within the chart. 1. Liquidity Identification (BSL/SSL) Major Range: The script automatically calculates significant highs and lows based on the "Major Lookback" period. Buy-Side & Sell-Side Liquidity: These levels are plotted as red (BSL) and green (SSL) lines, serving as primary targets where the market often "hunts" for liquidity. 2. Sweep Detection (Liquidity Grabs) The indicator detects when the price briefly exceeds a major high or low but closes back within the range. Visuals: These potential reversal points are marked with an "X" icon above or below the candle (Sweep H/L). 3. Automated Market Structure Shifts (MSS) The core logic tracks direction changes on two distinct levels: Major MSS (Bold Yellow Line): Signals a significant trend reversal following a liquidity sweep. This is the primary confirmation for a new trend. Minor MSS (Dotted Yellow Line): Highlights smaller structural breaks within a trend—ideal for aggressive "Sniper" entries on lower timeframes. 4. Dynamic Fair Value Gaps (FVG) & iFVGs FVG Recognition: The indicator automatically draws boxes for bullish (green) and bearish (red) price imbalances. Change in Delivery (iFVG): When a price candle closes through an existing FVG box, the box turns gray. This signals an Inverted FVG (iFVG), indicating that the order flow has officially shifted in the new direction. 5. Customization (Inputs) Sensitivity: Users can adjust the lookback periods for both Trend (Major) and Entries (Minor) to suit different assets or timeframes. Visual Hierarchy: All colors, line widths, and box lengths are configurable to maintain a clean and professional chart layout. Trading Application: By automating the "grunt work" of structural analysis, this tool allows you to focus on the trade execution: Locate Liquidity: Identify BSL/SSL lines. Watch for the Sweep: Look for the "X" marks. Confirm the Shift: Wait for the yellow MSS lines. Execute via Order Flow: Use the gray iFVG boxes as your Point of Interest (POI). Fortfahren
Pine Script® göstergesi
Phantomas1 tarafından
SB Scanner (V2)⸻ 📊 Stacey Burke Signal Day Scanner This script is a multi-instrument signal day scanner scanner inspired by concepts taught by Stacey Burke. It is designed to help traders quickly identify contextual price behaviors across multiple futures, crypto, or index markets from a single chart. The scanner evaluates a customizable list of symbols and displays results in a clean, configurable table on the chart. ⸻ 🔍 What the Scanner Detects For each symbol, the script analyzes signal days and highlights: • FRD / FGD First Red Days and First Green Days based on multi-day price behavior. • 3-Day Breakout Sequences (3DL / 3DS) Identifies consecutive directional expansion over three sessions. • Inside / Outside Days (ID / OD) Detects compression and expansion patterns in daily ranges. • CIB (Close-In-Breakout) Flags closes near the prior day’s range extremes. • 3-Day Cycle Continuation Highlights potential Day-3 directional continuation scenarios. All pattern columns can be individually toggled on or off to keep the table focused on what matters most to you. ⸻ 🧭 How It’s Meant to Be Used This scanner is not a trade signal generator. It is a context and awareness tool intended to: Help traders monitor multiple markets simultaneously Quickly spot structural conditions worth deeper analysis Support discretionary decision-making within a broader trading plan It works best when combined with session context, key levels, and execution logic chosen by the trader. ⸻ 🎨 Customization & Display Adjustable table position (top/bottom, left/center/right) Custom colors for: Background Text Current chart symbol Supports up to 24 symbols Designed to be visually clean and easy on the eyes ⸻ ⚠️ Disclaimer This script is provided for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or trade signals. All trading decisions and risk management remain the responsibility of the user. ⸻
Pine Script® göstergesi
tradingwithmigs tarafından
4
Entry / TP / SL Alert Bands (Simple & Stable)Entry / TP / SL Alert Bands – Invite-Only Version Description This tool plots customizable Entry, Take-Profit, and Stop-Loss reference levels, along with two alert bands derived as a percentage of the distance between Entry→TP and Entry→SL. The bands update immediately when inputs are adjusted and remain constant across the chart. This is useful for traders who want to visually monitor when price approaches key zones associated with their pre-defined trade plan. Core Features • Manual Entry, TP, and SL input fields • Long or Short mode • Upper alert band = a user-defined % of the distance toward TP • Lower alert band = a user-defined % of the distance toward SL • Optional visibility controls for Entry, TP, SL lines • Alerts for: – Price crossing the upper band – Price crossing the lower band – Price crossing either band • Works on any symbol and any timeframe • Alerts use TradingView’s built-in alertcondition() system How It Works The script computes the absolute distance between Entry→TP and Entry→SL, then applies user-defined percentages to determine where the alert bands should be drawn. If TP/SL are reversed relative to Entry for the selected direction, the relevant band may be invisible (e.g., negative or invalid distance). Proper TP/SL placement is required for intended use. Notes • This tool does not generate buy/sell signals. • This tool does not provide financial advice. • Proper risk management, independent decision-making, and verification of all settings are required. ⸻
Pine Script® göstergesi
drlicht1 tarafından
Asia/London/NY Session Slope LinesTITLE: Asia/London/NY Session Slope Lines Track momentum across all three major trading sessions with automated slope lines showing pips per bar movement. 📊 VISUALIZE SESSION MOMENTUM AT A GLANCE This powerful indicator automatically draws slope lines for all three major forex trading sessions (Asia, London, and New York), giving you instant insight into directional bias and momentum for each session. ✨ KEY FEATURES: • Three Session Coverage - Asia, London, and New York sessions tracked simultaneously • Pips Per Bar Calculation - See exact momentum as "pips moved per bar" for easy comparison • Customizable Styling - Different colors, line styles, and widths for each session • Auto-Detection - Automatically identifies session boundaries and draws lines • Clean Labels - Each session displays its slope value directly on the chart • Session Markers - Optional triangles show exact start/end of each session 📈 HOW IT WORKS: The indicator calculates the slope by measuring: 1. Price movement during the entire session (in pips) 2. Number of bars in that session 3. Result: Pips per bar (momentum strength) Example: If Asia session moved +30 pips over 60 bars = +0.50 pips/bar slope 🎨 VISUAL CLARITY: • Asia Session: Solid lines (Green/Red by default) • London Session: Dashed lines (Blue/Orange by default) • New York Session: Dotted lines (Lime/Fuchsia by default) • Positive slopes = Bullish momentum • Negative slopes = Bearish momentum 🔧 FULLY CUSTOMIZABLE: • Adjust session times for any timezone • Change colors for positive/negative slopes per session • Toggle session boundary markers on/off • Modify line width and style independently 💡 PERFECT FOR: ✓ Session traders who focus on specific market hours ✓ Identifying which session has the strongest momentum ✓ Spotting trend continuation or reversal between sessions ✓ Comparing volatility across different trading sessions ✓ Finding the best session for your trading strategy ⚙️ WORKS WITH: • All forex pairs (EUR/USD, GBP/USD, USD/JPY, etc.) • Any timeframe (works best on 5m-1H charts) • Automatically adjusts pip calculation for JPY pairs 🚀 QUICK SETUP: 1. Add indicator to chart 2. Customize session times if needed (Settings → Input tab) 3. Adjust colors and styles (Settings → Style tab) 4. Start trading with clear session momentum insight! No complex configuration needed - works perfectly with default settings! 🚀 QUICK START GUIDE - Asia/London/NY Session Slope Lines ────────────────────────────────────────────────────────────── STEP 1: ADD TO CHART ────────────────────────────────────────────────────────────── 1. Open TradingView 2. Select any forex pair (e.g., EUR/USD) 3. Click "Indicators" at top of chart 4. Search: "Asia/London/NY Session Slope Lines" 5. Click to add to chart ────────────────────────────────────────────────────────────── STEP 2: UNDERSTAND WHAT YOU SEE ────────────────────────────────────────────────────────────── You'll see THREE different slope lines per day: 📍 ASIA SESSION (Solid Line) • Default: 00:00 - 09:00 (Exchange time) • Green = Bullish | Red = Bearish • Label shows: "Asia +0.85 pips/bar" 📍 LONDON SESSION (Dashed Line) • Default: 03:00 - 12:00 (Exchange time) • Blue = Bullish | Orange = Bearish • Label shows: "London -1.23 pips/bar" 📍 NEW YORK SESSION (Dotted Line) • Default: 09:30 - 16:00 (Exchange time) • Lime = Bullish | Fuchsia = Bearish • Label shows: "NY +2.14 pips/bar" ────────────────────────────────────────────────────────────── STEP 3: HOW TO READ THE SLOPES ────────────────────────────────────────────────────────────── The number tells you MOMENTUM STRENGTH: +0.10 to +0.50 pips/bar = Weak uptrend +0.50 to +1.50 pips/bar = Moderate uptrend +1.50+ pips/bar = Strong uptrend -0.10 to -0.50 pips/bar = Weak downtrend -0.50 to -1.50 pips/bar = Moderate downtrend -1.50+ pips/bar = Strong downtrend ────────────────────────────────────────────────────────────── STEP 4: TRADING STRATEGIES ────────────────────────────────────────────────────────────── ✅ CONTINUATION PLAY: If Asia = +1.2 pips/bar AND London = +0.8 pips/bar → Look for LONG entries during NY session ✅ REVERSAL PLAY: If Asia = +2.5 pips/bar (strong) AND London = -0.3 pips/bar → Momentum shifted, watch for reversal ✅ STRONGEST SESSION: Compare all three slopes - trade during the session with highest absolute value NY = +3.2 pips/bar > London = +1.1 > Asia = +0.4 → NY session has strongest momentum ────────────────────────────────────────────────────────────── STEP 5: CUSTOMIZE (OPTIONAL) ────────────────────────────────────────────────────────────── Click the gear icon ⚙️ next to indicator name: 🕐 ADJUST SESSION TIMES: Settings → Asia Session → Change hours (Use YOUR timezone or exchange timezone) 🎨 CHANGE COLORS: Settings → Asia/London/NY Style → Pick colors 👁️ HIDE MARKERS: Settings → Display Options → Uncheck "Show Session Markers" ────────────────────────────────────────────────────────────── STEP 6: BEST PRACTICES ────────────────────────────────────────────────────────────── 📊 Use on 5-minute to 1-hour charts (Too high timeframe = not enough bars per session) 💱 Works best on major forex pairs (EUR/USD, GBP/USD, USD/JPY, etc.) 🕐 Verify session times match your trading timezone (Default is exchange timezone) 📈 Combine with support/resistance levels (Strong slope + key level = high probability setup)
Pine Script® göstergesi
drlicht1 tarafından
Universal Po3 Profiler [Pro +] | cephxsUNIVERSAL Po3 PROFILER 🧪 All concepts used in the development of this indicator are open source and available to all on youtube. Credits go out to Michael J. H. (ICT) as the one putting it out there for all. A refined approach to multi-timeframe structural analysis. Clean visuals. Precise signals. Nothing more than what matters. OVERVIEW Built for traders who value clarity over complexity, this profiler distills institutional price delivery concepts into a visually cohesive overlay. It maps higher timeframe structure directly onto your chart while detecting key divergence patterns across correlated assets. The design philosophy is intentional minimalism—every element earns its place on your chart. No redundant indicators. No visual noise. Just the structural context you need to frame your trading decisions. 📷 Full indicator overview showing HTF candles, CISD lines, and SMT divergences on a 5m YM chart CORE FEATURES 🧪 Multi-Timeframe Profiling Automatically profiles up to three higher timeframes based on your chart's resolution. The system intelligently selects appropriate HTF pairings—or lets you override with manual control. 0 stress, minimal input overload. Auto Mode: Adapts HTF selection to your chart timeframe Profiler Source: Choose which HTF defines your structural boundaries Directional Bias: Filter profiling to bullish or bearish setups only 📷 Side-by-side comparison; Auto mode on 5m chart vs 15m chart showing different HTF selections 🔀 SMT DIVERGENCE DETECTION Identifies Smart Money divergences between correlated assets in real-time. When the primary asset makes a structural move that correlated pairs fail to confirm by moving in-sync, the system flags potential reversals. Tracks divergences across multiple HTF sessions Supports both normal and inverse correlations Independent chart and HTF candle visualization Automatic invalidation when divergence resolves Configurable asset pairs with correlation library integration that is updated regularly 📷 SMT divergence example, ES vs YM showing bearish divergence at session highs 📐 CISD DETECTION & FIBONACCI PROJECTIONS Change in State of Delivery (CISD) marks the moment price starts to deliver in the opposing direction of where it previously went. The system identifies these pivotal transitions and projects optional Fibonacci extensions to map potential price targets. Automatic stretch calculation from opposing candle sequences Confirmation-based detection (not predictive) Fibonacci projections with customizable levels (-1 to -4.5) Size filtering to eliminate noise on smaller moves Visual invalidation when structure breaks 📷 Confirmed CISD with Fibonacci projection levels (other features disabled to highlight) 📷 Multiple CISDs showing bullish and bearish examples simultaneously 🎯 MANIPULATION AREA PROFILING Detects sweep-and-reversal sequences within HTF candle boundaries. The profiling system identifies when price sweeps the immediate previous candle's extreme then confirms directional commitment after a candle close. How the manipulation area is calculated (it is not a magic level, it's a simple division : ) ) For C3 : is measured from the Open of C3 to the quadrant C.E of C2 For C4 : is measured from the Open of C4 to the Upper Quadrant (25/75) of C3. All Based on openly-sourced ICT Concepts Po3 area visualization on profiler HTF Sweep line tracking at structural levels C1/C2/C3 phase progression Bias filtering for directional focus 📷 Manipulation area highlighting Po3 zone with sweep lines HTF CANDLE VISUALIZATION Projects higher timeframe candles to the right of your chart, providing structural context without cluttering price action. Full credit for the base logic used in building this goes to @fadizeidan. Up to 3 HTF layers with independent candle counts PSP (Precision Swing Point) divergence detection on candles Clean, adjustable styling Session labels with countdown timers INPUTS Directional Bias Po3 Profiling Bias: Auto / Bullish / Bearish — filters manipulation area detection CISD/SSMT Bias: Auto / Bullish / Bearish — filters divergence detection HTF Configuration Auto Mode: Enabled by default. Automatically configures HTF timeframes HTF 1/2/3: Manual timeframe selection when Auto Mode disabled Profiler Source: Which HTF defines profiling boundaries SMT Settings Enable SMT: Master toggle for divergence detection Show on Chart: Render divergence lines on price chart Show on HTF Candles: Render divergence lines on HTF candle visuals Asset Selection: Configure correlated pairs and inversion settings CISD Settings Show CISD: Enable change in state detection Fibonacci Projections: Enable extension level plotting Level Configuration: Toggle individual fib levels (-1 through -4.5) Profiler Status Bar Position: 9 positions including center options Styling: Size, bold toggle, custom colors --- RECOMMENDED USAGE Start with Auto Mode enabled to learn the HTF relationships Set your directional bias if you have a higher timeframe thesis Watch for SMT divergences at session extremes Use CISD confirmations to identify structural shifts Reference Fibonacci projections for potential targets Optimal Timeframes: Scalping: 1m-3m charts (profiles to 15m-90m) Intraday: 5m-15m charts (profiles to 1H-4H / Optionally 6H) Swing: 1H-4H charts (profiles to Daily-Weekly) --- CORRELATED ASSETS The SMT system works with major correlations including: Index Futures: CME_MINI:ES1! , CME_MINI:NQ1! , CBOT_MINI:YM1! Forex Majors: FOREXCOM:EURUSD , FOREXCOM:GBPUSD , TVC:DXY Crypto: BINANCE:BTCUSDT , BINANCE:ETHUSDT Crypto Futures: CME:BTC1! , CME:ETH1! --- NOTES This version does not include alert conditions. Visual-first design. It will be easier to understand if you have a preliminary knowledge of the concepts beforehand This is not a learning instrument on it's own and could have bugs, Know it for yourself so you can identify bugs if any. --- DISCLAIMER This indicator is provided for educational and analytical purposes only. It does not constitute financial advice, and no representation is made regarding future performance. Trading involves substantial risk of loss. Always conduct your own analysis and use proper risk management. Past structural patterns do not guarantee future price behavior. --- CREDITS Inspiration and HTF candle plotting boilerplate: @fadizeidan Asset correlation library: fstarcapital Development: cephxs & fstarcapital --- CHANGELOG v1.0: Initial Pro+ release — SMT divergences, CISD detection, multi-HTF Po3 profiling
Pine Script® göstergesi
fstarcapital tarafından
OW_MTF CandleDescription Overview The OW_MTF+ indicator allows traders to visualize Higher Timeframe (HTF) candlesticks directly on their current chart. Designed for Price Action and Smart Money Concepts (SMC) traders, this tool helps you perform Top-Down Analysis without switching back and forth between timeframes. Unlike standard MTF indicators, this script features a Dynamic History Fade system that automatically adjusts the transparency of older candles, keeping your chart clean and focused on recent price action. Key Features ・Multi-Timeframe Overlay: Display candles from any higher timeframe (e.g., show 4-Hour candles on a 15-Minute chart). ・Real-Time Updates: Uses lookahead=barmerge.lookahead_on to ensure the forming HTF candle updates in real-time with the current market price, allowing for immediate reaction to live price action. ・Dynamic Transparency (Fade Effect): The indicator includes a smart visual management system. It automatically increases the transparency of older historical candles so they do not obscure your chart, while keeping the most recent candles vivid and clear. ・Extended History: Supports displaying up to 500 historical HTF bars, giving you a deep view of past market structure. ・Time-Accurate Positioning: utilizes xloc.bar_time to ensure candles and wicks are perfectly aligned with the correct timestamp, preventing visual misalignment during market gaps. Settings & Customization ・Timeframe: Select your desired Higher Timeframe (e.g., 240 for 4-Hour, D for Daily). ・History Depth: Choose how many HTF bars to display (Max 500). Visual Styles: Fully customizable colors for Bullish/Bearish bodies, wicks, and borders. ・Auto Extend Mode: When enabled, this optimizes the transparency of the most recent 50 bars for the best visual experience. Technical Note This indicator uses lookahead_on to retrieve HTF data. This is intentional to allow the current forming bar to update in real-time. Please note that while the historical closed candles are permanent, the currently active HTF candle will update tick-by-tick until it closes. 概要 OW_MTF Candleは、現在表示しているチャート上に上位足のローソク足を重ねて表示するマルチタイムフレーム・インジケーターです。 プライスアクションやスマートマネーコンセプト（SMC）を用いたトレードにおいて、時間足を切り替えることなくトップダウン分析を行うのに最適です。 通常のMTFインジケーターとは異なり、**「ダイナミック・ヒストリー・フェード（動的透明度調整）」**機能を搭載しています。これにより、過去の古いローソク足の透明度を自動的に上げ、最新のプライスアクションを強調しつつ、チャート全体の視認性を保ちます 。 主な機能 ・マルチタイムフレーム表示: 任意の上位足を選択して表示可能です（例：15分足チャートに4時間足のローソクを表示など）。 ・リアルタイム更新: request.security で lookahead=barmerge.lookahead_on を使用しているため、現在形成中の上位足もリアルタイムの価格に追従して動きます 。 ・動的透明度（フェード効果）: 過去の履歴バーがチャートを邪魔しないよう、古い足ほど自動的に透明度を高く調整します。これにより最新の相場状況がクリアに表示されます 。 ・拡張履歴: 最大500本までの過去の上位足を表示でき、長期的な市場構造の確認が可能です 。 ・正確な位置合わせ: xloc.bar_time（時間座標）を使用しているため、市場の休場やギャップがあってもローソク足とヒゲが正しい時刻に配置されます 。 設定項目 ・上位足の時間足 (Timeframe): 表示したい上位足を選択します（デフォルト: 240/4時間足）。 ・表示する履歴本数: 過去何本分の上位足を表示するか設定します（最大500本）。 ・スタイル設定: 上昇足・下降足の実体色、ヒゲの色、枠線の太さなどを自由にカスタマイズ可能です 。 ・自動拡張モード (Auto Extend): 最新の50本に対して最適な透明度調整を自動で行います 。 技術的な注釈 ・確定した過去足: リペイントしません（変化しません）。 ・現在進行中の足: 確定するまではリアルタイムで形状が変化します。
Pine Script® göstergesi
popularOrange9727 tarafından
Power Bar SMA Directional (Trade Your Edge)GENERAL OVERVIEW: The Power Bar SMA Directional (Trade Your Edge) indicator identifies high-momentum Power Bars and uses a structured SMA-based breakout model to generate Long and Short trading signals. Once a signal appears, the indicator automatically places a Stop-Loss and three Take-Profit levels, with an optional dynamic trailing stop-loss. Alerts are available for every trade event. This indicator was developed by Flux Charts in collaboration with Steven Adams (Trade Your Edge). What is the purpose of the indicator?: The purpose of the Power Bar SMA Indicator is to turn an unusually strong candle (Power Bar) into a complete, rule-based trade setup. The indicator does three main things, very specifically: It spots “power bars”. These are candles where the body is both large compared to the candle’s own range and large compared to nearby candles. It only cares about power bars when they align with the trend’s direction: bullish or bearish. When that happens, the indicator gives a buy or sell signal with an entry at the signal candle, a stop-loss at the low/high of the power bar, and three take-profit targets placed at fixed multiples of the entry to stop-loss distance. You can also have the stop move up/down after each target is hit with the trailing stop-loss feature. What’s the theory behind the indicator?: The theory behind this indicator is that large, one-sided candles often mark the start of directional strength. When a candle’s body takes up most of its total range and exceeds the average size of recent candlesticks, it shows clear control from either buyers or sellers. The indicator combines this concept with a simple moving average to confirm trend direction, ensuring signals only align with the current bias. It then checks if price breaks a recent swing high or low to confirm momentum is continuing rather than consolidating inside a range. By combining three core elements: trend bias, momentum identification, and confirmation that price has room for new discovery beyond prior ranges, the indicator can focus on finding trade setups that have multiple market factors in alignment. POWER BAR SMA DIRECTIONAL FEATURES: The Power Bar SMA Directional indicator includes 4 main features: Power Bars Trend Bias Long / Short Signals + Risk Management Alerts POWER BARS: 🔹What are Power Bars?: Power Bars are large, high-momentum candles that show strength in one direction of the market. They form when a candle’s body (the distance between open and close) dominates most of the candle’s total range (the distance between high and low), meaning price moved strongly in one direction with little to no pullback. To qualify, the candle must also be large relative to nearby candles. This size difference confirms that the candle is a burst of momentum. 🔹How to interpret and use Power Bars: When a Power Bar forms, it signals that price has just made a strong directional move with little to no pullback. Traders can use these bars to identify momentum shifts and potential trade setups. A bullish Power Bar means buyers controlled the entire candle, marking the start of upward momentum. A bearish Power Bar means sellers were in control of the entire candle, signaling the start of downwards momentum. In the Power Bar SMA Directional indicator, these candles are only used for signals when they align with the market trend and satisfy other entry requirements, mentioned later on. Bullish Power Bars forming above the Simple Moving Average (SMA) can signal potential long opportunities. Bullish Power Bars forming below the SMA can signal potential short opportunities. 🔹How are Power Bars identified: Power Bars are detected and confirmed only after the candle closes, ensuring that the full candlestick body and range can be measured. The indicator does not repaint or change past bars. Once a Power Bar is confirmed, it stays fixed on the chart. Power Bars can be detected on any timeframe or symbol that produces standard candlestick data. The indicator identifies Power Bars using two user-defined inputs: Sensitivity and Body %. ◇ Sensitivity: The Sensitivity setting determines how large a candle’s body must be relative to nearby candles. It uses the Average True Range (ATR) to compare the current candle’s size with recent candles, and the Sensitivity value acts as a multiplier of that ATR. A higher Sensitivity value means the candle must be much larger than recent candles to qualify, so fewer Power Bars will form. A lower value makes the filter less strict, allowing more candles to qualify. ◇ Body %: The Body % setting controls what percentage of the candle’s total range must be body rather than Wick. A higher value requires the body to take up more of the candle’s total range, so fewer candles pass the filter. A lower value allows candles with more wick to qualify, so more Power Bars will form. Body % Example: If Body % is set to 50, the candle body must cover at least half of the candle’s total range. For example, if a candle’s high is $11, its low is $10, its open is $10.20, and its close is $10.80, then the total range is $1 ($11 - $10) and the body is $0.60 ($10.80 - $10.20). Body % = (Body / Total Range) * 100 = (0.60 ÷ 1.00 × 100) = 60%. Since 60% is greater than the input of 50%, this candle passes the Body % criteria. Once a candlestick closes and it meets both the Sensitivity and Body % requirements, it will be plotted in a different color, using barcolor() function. Users can adjust the bullish/bearish colors of Power Bars by adjusting the ‘Candle Coloring’ setting. The Power Bar candle coloring is purely visual and does not affect signal logic or strategy calculations. TREND BIAS: The indicator uses a Simple Moving Average (SMA) to determine overall trend direction and ensure that long/short signals align with the market bias. When the SMA is sloping upward and price is trading above it, the market is considered to be in a bullish trend. In this case, only long setups are allowed. When the SMA is sloping downward and price is below it, the market is considered bearish, and only short setups are valid. This filtering ensures that every signal follows the current trend rather than fighting it. Within the settings, the SMA length can be customized to match different trading styles. A shorter SMA period reacts more quickly to price changes, making it better suited for scalping or lower timeframes where traders want faster entries and exits. A longer SMA period responds more slowly, which smooths out smaller fluctuations and is more useful for day traders or swing traders who focus on larger trends. By default, the SMA length is set to 20. Signals on SEED_ALEXDRAYM_SHORTINTEREST2:NQ 5-minute timeframe with a 10 SMA vs. 100 SMA: 🔹Why does the indicator include a trend filter?: This indicator is built around the assumption that markets tend to continue moving in their current direction. Thus, if the trend is bullish, it’s assumed that price will continue moving higher. If the trend is bearish, it’s assumed that price will continue moving lower. By combining the SMA filter with the momentum logic of the power bars, the indicator avoids countertrend setups. This keeps signals focused on continuation setups where both the trend and short-term strength (momentum) are in agreement. LONG/SHORT SIGNALS: This indicator identifies potential trade setups by combining momentum, trend alignment, and structural confirmation. It detects when a Power Bar candle appears, and then looks for confirmation that the move is valid through trend alignment and a structure break. There are three long setups and three short setups: Momentum Breakout Proximity Breakout Delayed Breakout All setups require: A valid Power Bar forming in the correct context relative to the SMA. A break of nearby structure (defined by the Swing Length setting). 🔹Signal Settings: ◇ SMA Distance: This setting defines how close a Power Bar must be to the SMA to qualify for the proximity breakout setup type. It measures the maximum allowed distance between the Power Bar’s open price and the SMA, expressed as a multiple of the Average True Range (ATR). This setting only affects Setup #2 (Proximity Breakout) and sometimes Setup #3 (Delayed Breakout). Setup #1 does not use this filter because its logic depends on price crossing the SMA or confirming later. In proximity setups, the power bar candle must both open and close on the same side of the SMA (bullish or bearish) while still being within the allowed SMA Distance range. This condition prevents signals when price is stretched too far away from the SMA, which could indicate exhaustion or a potential pullback rather than continuation. A lower SMA Distance value tightens this filter, allowing only Power Bars that form very close to the SMA, resulting in fewer but more conservative signals. A higher SMA Distance value gives wiggle room and allows setups that form farther from the SMA, generating more frequent signals. In the example below, when the SMA Distance is set to 0.5 (left chart), the bullish Power Bar does not trigger a long signal because its opening price is too far from the SMA. When the SMA Distance is increased to 1.0 (right chart), the same candle now falls within the allowed range, making the setup valid and displaying a long signal label. ◇ Swing Length: The Swing Length setting defines how the indicator identifies recent structure levels used for breakout confirmation. These structure levels are swing highs and swing lows, which represent points where price reversed direction over a specified number of bars. The indicator uses these high/low levels to determine whether price has broken past a meaningful area of prior support or resistance before confirming a trade setup. The Swing Length value determines how far back the indicator looks when calculating these points. Internally, it uses the Highest/Lowest method, scanning the last N bars (where N is the Swing Length input) to find the highest high and lowest low within that range. The highest high becomes the immediate resistance level for potential long setups. The lowest low becomes the immediate support level for potential short setups. A lower Swing Length value makes the indicator reference closer levels. This increases the number of potential signals because nearby highs and lows are easier for price to reach. A higher Swing Length value references farther structure levels, typically major swing points, which reduces signal frequency. Every setup requires a structure break for confirmation. The Swing Length setting directly affects how strict or lenient the entire indicator behaves for each setup type. In Setup #1 (Baseline Momentum Breakout) and Setup #2 (Trend-Aligned Proximity Breakout), the Power Bar must break the structure level during or immediately after its formation. In Setup #3 (Delayed Breakout Confirmation), the same Swing Length level is referenced for a limited number of candles defined by the Candles Between Confirmation setting. ◇ Candles Between Confirmation: The Candles Between Confirmation setting defines how long the indicator will wait for price to confirm a breakout after a qualifying Power Bar forms. It represents the maximum number of bars allowed between the Power Bar’s close and the moment when price breaks the nearby structure level, which is derived from the Swing Length setting. The structure level is defined as the most recent swing high (for long setups) or swing low (for short setups). If a structure break occurs within the specified window, a valid signal is triggered, and the Long or Short label is plotted at the close of the breakout candle. If price fails to break through the level within a certain number of candles, the setup is invalidated. This ensures that signals only appear when momentum follows through promptly, and not when price stalls or consolidates for an extended period. Lower values make confirmations stricter, capturing only quick momentum breakouts. Higher values allow more time for slower markets or higher timeframes to complete structure breaks. Adjust this setting based on market volatility and trading style. In the example below, when Candles Between Confirmation is set to 10, no signal appears because price breaks the swing high after 15 bars, which is greater than the allowed limit. When the setting is increased to 15, the same move qualifies, and a long signal is triggered as price breaks the swing high 15 candles after the initial bullish Power Bar that crossed the SMA. 🔹Long Setups: Long Setup #1: Momentum Breakout A bullish Power Bar opens below the SMA, and closes above it, showing buyer strength. A breakout must occur during this bullish Power Bar candle through a nearby resistance level derived from the Swing Length setting. When this breakout occurs, a Long Signal appears at bar close. After a signal appears, three take-profit levels and one stop-loss level are also plotted. Stop-Loss: Placed at the Power Bar’s low. Take-Profit 1: Set using a 1:1 risk distance from the Stop-Loss to entry. Take-Profit 2: Extends to 1:1.5 risk-to-reward. Take-Profit 3: Extends to 1:2 risk-to-reward. (Power Bars are white in this image) Long Setup #2: Proximity Breakout A bullish Power Bar opens and closes above the SMA, but is still close enough to it to show price hasn’t extended too far. (Refer to SMA Distance setting). As long as the opening of that candle is within the SMA Distance threshold, the setup remains valid. The bullish Power Bar candle must break through the recent swing high (refer to Swing Length setting). A Long Signal triggers when that breakout is confirmed. After a signal appears, three take-profit levels and one stop-loss level are also plotted, similar to Long Setup #1. (Power Bars are white in this image) Long Setup #3: Delayed Breakout A bullish Power Bar appears in a valid location (Refer to Long Setup #1 or Long Setup #2), but structure is not broken immediately. The indicator waits for confirmation within the maximum Candles Between Confirmation window. If price breaks structure within that time, a Long Signal appears. If price fails to break structure in time, the setup is discarded. Risk Management: Same Stop-Loss, TP 1, TP 2, and TP 3 logic as Long Setup #1 (Power Bars are white in this image) 🔹Short Setups: Short Setup #1: Momentum Breakout A bearish Power Bar opens above the SMA, and closes below it, showing seller strength. A breakout must occur during this bearish Power Bar candle through a nearby support level derived from the Swing Length setting. When this breakout occurs, a Short Signal appears at bar close. After a signal appears, three take-profit levels and one stop-loss level are also plotted. Stop-Loss: Placed at the Power Bar’s high. Take-Profit 1: Set using a 1:1 risk distance from the Stop-Loss to entry. Take-Profit 2: Extends to 1:1.5 risk-to-reward. Take-Profit 3: Extends to 1:2 risk-to-reward. (Power Bars are white in this image) Short Setup #2: Proximity Breakout A bearish Power Bar opens and closes below the SMA, but is still close enough to it to show price hasn’t extended too far. (Refer to SMA Distance setting). As long as the opening of that candle is within the SMA Distance threshold, the setup remains valid. The bearish Power Bar candle must break through the recent swing low (refer to Swing Length setting). A Short Signal triggers when that breakout is confirmed. After a signal appears, three take-profit levels and one stop-loss level are also plotted, similar to Short Setup #1. (Power Bars are white in this image) Short Setup #3: Delayed Breakout A bearish Power Bar appears in a valid location (Refer to Short Setup #1 or Short Setup #2), but structure is not broken immediately. The indicator waits for confirmation within the maximum Candles Between Confirmation window. If price breaks structure within that time, a Short Signal appears. If price fails to break structure in time, the setup is discarded. Risk Management: Same Stop-Loss, TP 1, TP 2, and TP 3 logic as Long Setup #1 (Power Bars are white in this image) 🔹Trailing Stop-Loss Feature: When the Trailing Stop-Loss setting is enabled, the Stop-Loss (SL) automatically adjusts as price reaches take-profit levels. This feature helps secure profits while keeping the trade logic completely rule-based and non-discretionary. Here’s exactly how it works step-by-step: Initial Stop-Loss placement: For a Long trade, the initial SL is set at the low of the bullish Power Bar that triggered the setup. For a Short trade, the initial SL is set at the high of the bearish Power Bar that triggered the setup. This level stays fixed until one of the Take-Profit targets is reached. After TP 1 is hit: The SL automatically moves to the entry price (breakeven). After TP2 is hit: The SL automatically moves to TP 1 Final exit condition: The trade is considered complete once either the trailing Stop-Loss or TP 3 is reached. 🔹Visualization: Users can enable or disable: Long Signals Short Signals Take-Profit Lines Take-Profit Labels Stop-Loss Lines Stop-Loss Labels Signal Line SMA ◇ Signal Line: The Signal Line is an optional visual feature that helps users see exactly which structure level the indicator is using to confirm a breakout. It does not change how signals are generated. It only displays the reference point on the chart. Users can customize the Signal Line style (Dashed, Dotted, Solid) and choose different colors for bullish and bearish signal lines. The Signal Line can also be turned off completely. When disabled, signals will not be affected. ALERTS: The indicator supports alerts, so you never miss a key market move. You can choose to receive alerts for each of the following conditions: Long Signal Short Signal TP 1 (Take-Profit 1) TP 2 (Take-Profit 2) TP 3 (Take-Profit 3) SL (Stop-Loss) UNIQUENESS: This indicator automates a strategy that is normally managed manually using multiple steps: identifying large momentum candles, validating trend direction, confirming breakout strength through structure, and then projecting clean risk-based targets. The SMA Distance filter, confirmation window, and swing structure rules work together to ensure signals only trigger when momentum (Power Bars) aligns with technical levels. This indicator turns Power Bars into complete trade ideas with real-time SL/TP management and alerts.
Pine Script® göstergesi
fluxchart tarafından
Asia/London/NY Session Slope LinesTITLE: Asia/London/NY Session Slope Lines Track momentum across all three major trading sessions with automated slope lines showing pips per bar movement. 📊 VISUALIZE SESSION MOMENTUM AT A GLANCE This powerful indicator automatically draws slope lines for all three major forex trading sessions (Asia, London, and New York), giving you instant insight into directional bias and momentum for each session. ✨ KEY FEATURES: • Three Session Coverage - Asia, London, and New York sessions tracked simultaneously • Pips Per Bar Calculation - See exact momentum as "pips moved per bar" for easy comparison • Customizable Styling - Different colors, line styles, and widths for each session • Auto-Detection - Automatically identifies session boundaries and draws lines • Clean Labels - Each session displays its slope value directly on the chart • Session Markers - Optional triangles show exact start/end of each session 📈 HOW IT WORKS: The indicator calculates the slope by measuring: 1. Price movement during the entire session (in pips) 2. Number of bars in that session 3. Result: Pips per bar (momentum strength) Example: If Asia session moved +30 pips over 60 bars = +0.50 pips/bar slope 🎨 VISUAL CLARITY: • Asia Session: Solid lines (Green/Red by default) • London Session: Dashed lines (Blue/Orange by default) • New York Session: Dotted lines (Lime/Fuchsia by default) • Positive slopes = Bullish momentum • Negative slopes = Bearish momentum 🔧 FULLY CUSTOMIZABLE: • Adjust session times for any timezone • Change colors for positive/negative slopes per session • Toggle session boundary markers on/off • Modify line width and style independently 💡 PERFECT FOR: ✓ Session traders who focus on specific market hours ✓ Identifying which session has the strongest momentum ✓ Spotting trend continuation or reversal between sessions ✓ Comparing volatility across different trading sessions ✓ Finding the best session for your trading strategy ⚙️ WORKS WITH: • All forex pairs (EUR/USD, GBP/USD, USD/JPY, etc.) • Any timeframe (works best on 5m-1H charts) • Automatically adjusts pip calculation for JPY pairs 🚀 QUICK SETUP: 1. Add indicator to chart 2. Customize session times if needed (Settings → Input tab) 3. Adjust colors and styles (Settings → Style tab) 4. Start trading with clear session momentum insight! No complex configuration needed - works perfectly with default settings! 🚀 QUICK START GUIDE - Asia/London/NY Session Slope Lines ────────────────────────────────────────────────────────────── STEP 1: ADD TO CHART ────────────────────────────────────────────────────────────── 1. Open TradingView 2. Select any forex pair (e.g., EUR/USD) 3. Click "Indicators" at top of chart 4. Search: "Asia/London/NY Session Slope Lines" 5. Click to add to chart ────────────────────────────────────────────────────────────── STEP 2: UNDERSTAND WHAT YOU SEE ────────────────────────────────────────────────────────────── You'll see THREE different slope lines per day: 📍 ASIA SESSION (Solid Line) • Default: 00:00 - 09:00 (Exchange time) • Green = Bullish | Red = Bearish • Label shows: "Asia +0.85 pips/bar" 📍 LONDON SESSION (Dashed Line) • Default: 03:00 - 12:00 (Exchange time) • Blue = Bullish | Orange = Bearish • Label shows: "London -1.23 pips/bar" 📍 NEW YORK SESSION (Dotted Line) • Default: 09:30 - 16:00 (Exchange time) • Lime = Bullish | Fuchsia = Bearish • Label shows: "NY +2.14 pips/bar" ────────────────────────────────────────────────────────────── STEP 3: HOW TO READ THE SLOPES ────────────────────────────────────────────────────────────── The number tells you MOMENTUM STRENGTH: +0.10 to +0.50 pips/bar = Weak uptrend +0.50 to +1.50 pips/bar = Moderate uptrend +1.50+ pips/bar = Strong uptrend -0.10 to -0.50 pips/bar = Weak downtrend -0.50 to -1.50 pips/bar = Moderate downtrend -1.50+ pips/bar = Strong downtrend ────────────────────────────────────────────────────────────── STEP 4: TRADING STRATEGIES ────────────────────────────────────────────────────────────── ✅ CONTINUATION PLAY: If Asia = +1.2 pips/bar AND London = +0.8 pips/bar → Look for LONG entries during NY session ✅ REVERSAL PLAY: If Asia = +2.5 pips/bar (strong) AND London = -0.3 pips/bar → Momentum shifted, watch for reversal ✅ STRONGEST SESSION: Compare all three slopes - trade during the session with highest absolute value NY = +3.2 pips/bar > London = +1.1 > Asia = +0.4 → NY session has strongest momentum ────────────────────────────────────────────────────────────── STEP 5: CUSTOMIZE (OPTIONAL) ────────────────────────────────────────────────────────────── Click the gear icon ⚙️ next to indicator name: 🕐 ADJUST SESSION TIMES: Settings → Asia Session → Change hours (Use YOUR timezone or exchange timezone) 🎨 CHANGE COLORS: Settings → Asia/London/NY Style → Pick colors 👁️ HIDE MARKERS: Settings → Display Options → Uncheck "Show Session Markers" ────────────────────────────────────────────────────────────── STEP 6: BEST PRACTICES ────────────────────────────────────────────────────────────── 📊 Use on 5-minute to 1-hour charts (Too high timeframe = not enough bars per session) 💱 Works best on major forex pairs (EUR/USD, GBP/USD, USD/JPY, etc.) 🕐 Verify session times match your trading timezone (Default is exchange timezone) 📈 Combine with support/resistance levels (Strong slope + key level = high probability setup)
Pine Script® göstergesi
drlicht1 tarafından
Oracle Trade And Smart Probability أداة تحليل فني مصممة لمساعدة المتداول على قراءة حركة السعر واتخاذ قرارات أكثر انضباطًا، مع التركيز على إدارة الصفقة قبل الإشارة. يعرض المؤشر إشارات دخول وخروج مع نظام إدارة صفقة مرئي يشمل: - سعر الدخول - الوقف الثابت - الوقف المتحرك - الهدف جميع الإشارات والتنبيهات تصدر بعد إغلاق الشمعة فقط، لضمان ثبات الإشارة وعدم تغيّرها لاحقًا. المؤشر أداة تحليل فني تعليمية وتحليلية فقط، ولا يُعد توصية استثمارية أو دعوة للبيع أو الشراء. التداول في الأسواق المالية ينطوي على مخاطر وقد يؤدي إلى خسارة رأس المال. المستخدم يتحمل كامل المسؤولية عن قراراته، ومطوّر المؤشر غير مسؤول عن أي خسائر مباشرة أو غير مباشرة ناتجة عن استخدامه. لا يُنصح باستخدام المؤشر بشكل منفرد، ولا يناسب جميع الفواصل الزمنية أو جميع أساليب التداول. يُفضّل استخدامه ضمن خطة تداول واضحة تشمل: - تأكيد الاتجاه من فريم زمني أعلى - وقف خسارة ثابت - إدارة مخاطرة لا تتجاوز 1–2% لكل صفقة يدعم المؤشر إرسال التنبيهات لإشارات الدخول والخروج وتحديثات إدارة الصفقة. كما يمكن ربطه بأنظمة تداول آلي خارجية عبر Webhook من قبل المستخدمين ذوي الخبرة، دون تحمّل المطوّر أي مسؤولية عن نتائج هذا الربط. جميع حقوق الملكية الفكرية محفوظة. يُمنع نسخ أو إعادة توزيع أو إعادة استخدام هذا المؤشر أو أي جزء منه دون إذن صريح من المطوّر. A technical analysis tool designed to assist traders in reading price action and making more disciplined trading decisions, with a strong focus on trade management before signals. The indicator provides entry and exit signals with visual trade management, including: - Entry price - Fixed stop - Trailing stop - Target All signals and alerts are generated only after candle close to ensure signal stability and avoid repainting behavior. This indicator is for educational and analytical purposes only and does not constitute financial advice or a recommendation to buy or sell. Trading in financial markets involves risk and may result in capital loss. Users are fully responsible for their trading decisions, and the developer is not liable for any direct or indirect losses. The indicator should not be used as a standalone decision-making tool and may not be suitable for all timeframes or trading styles. It is recommended to use it as part of a structured trading plan that includes: - Higher timeframe confirmation - Fixed stop-loss - Risk management limited to 1–2% per trade The indicator supports alerts for entries, exits, and trade management updates. Advanced users may connect alerts to external automated trading systems via webhook at their own responsibility. All intellectual property rights are reserved. Unauthorized copying, redistribution, or reuse of this indicator or any part of it is strictly prohibited.
Pine Script® göstergesi
businessman65 tarafından
Multi-Period Opening Range [ORB]Multi-Period Opening Range Indicator A comprehensive Opening Range (OR) tool for traders who want to track multiple timeframe ORs simultaneously with complete visual customization. 📊 WHAT IS OPENING RANGE? The Opening Range is the high and low price established during a specific period at the start of a trading session. Professional traders use these levels as critical support/resistance zones throughout the day. ✨ KEY FEATURES Five Customizable OR Periods: 5-Minute OR : 9:30-9:35 AM EST (Quick scalping reference) 15-Minute OR : 9:30-9:45 AM EST (Standard OR period) 30-Minute OR : 9:30-10:00 AM EST (Extended morning range) 1-Hour OR : 9:30-10:30 AM EST (Full morning session) Overnight OR : 6:00-7:00 PM EST (After-hours reference) Complete Visual Customization: Individual Toggle Controls : Turn each OR period on/off independently Custom Colors : Set unique colors for each timeframe's lines and fills Adjustable Line Thickness : Choose from 1-5 pixel width Label Styles : "5Min OR-High" or simple "OR-High" format Label Background Options : Choose colored backgrounds or clean text-only labels Label Sizes : Tiny, Small, Normal, or Large text Smart Display Options: OR-High, OR-Mid, OR-Low : Each level clearly labeled with price tooltips Midpoint Toggle : Show/hide dashed midpoint line Fill Toggle : Enable/disable shaded area between levels Historical Ranges : Show/hide previous session ORs Line Extension : Set projection distance (0-1440 minutes, default 5 min) Color-Coded Labels : Semi-transparent backgrounds match each OR theme (optional) 🎨 DEFAULT COLOR SCHEME Active by Default: 5-Min OR : Red lines (no fill) 1-Hour OR : Sky blue lines (no fill) Overnight OR : Brown lines with shaded fill Disabled by Default: 15-Min OR (Purple) - enable when needed 30-Min OR (Orange) - enable when needed 📈 HOW TO USE Setup: Add to any intraday timeframe (1min, 5min recommended) Enable your preferred OR periods Customize colors for visual distinction Set line extension (default 5 minutes) Trading Applications: Breakout Trading : Enter when price breaks OR-High/Low Range Trading : Trade between levels during consolidation Support/Resistance : Use multiple ORs as confluence zones Risk Management : Set stops beyond OR levels Session Analysis : Compare OR widths to gauge volatility Advanced Techniques: Watch for false breakouts returning inside range Combine with volume for confirmation Use overnight OR for pre-market sentiment Layer multiple ORs for high-probability zones ⚙️ CUSTOMIZATION OPTIONS Display Settings: Show/hide historical ranges, midpoint lines, and fills Line thickness: 1-5 pixels (default: 1) Label size: Tiny to Large Label style: With period prefix or generic Label background: With background or no background Extend lines: 0-1440 minutes (default: 5) Per-Period Controls: Each OR has independent settings for enable/disable, line color, fill color, and transparency. 💡 PRO TIPS Start with 5-min and 1-hour ORs only Use distinct colors for each timeframe Keep historical ranges OFF for cleaner charts Adjust extension: 5-10 min for active trading, 60+ for planning Combine OR breakouts with volume spikes Use overnight OR to understand after-hours action Wait for clean breakouts with volume confirmation 🔧 TECHNICAL SPECS Timezone : America/New_York (EST/EDT) Compatible Timeframes : Any intraday under 1 day Optimal Timeframes : 1-minute, 5-minute charts Real-Time Updates : Dynamic line extension with new bars 📌 BEST PRACTICES Use on liquid instruments (ES, NQ, SPY, QQQ) Wait for volume-confirmed breakouts Place stops beyond OR levels you're trading Size positions based on OR width Respect 1-hour OR as major support/resistance 🎯 IDEAL FOR Day traders, scalpers, futures traders (ES/NQ/YM), equity traders (SPY/QQQ), and anyone using Opening Range methodology in their trading strategy. Note: For educational purposes. Practice proper risk management and combine with your complete trading strategy.
Pine Script® göstergesi
elitesingh tarafından
2
Average Trading Range info box (today and historical)One small informational box, in the upper right of your chart to provide trading range information. Line one (historical) tells you the trading range over a configurable period of time as a $ amount and as a %. The second line (today) tells you where these values are today and the final line tells you as a %, where the values are today as a percentage of the configurable first line (14 days etc). The third line changes color when you are 75% of the way to the historical value and red when you are at over 100% of the historical value. Big DC scripts
Pine Script® göstergesi
donaldecotton tarafından
Enhanced OB [promuckaj]THE ENHANCED ORDER BLOCK Someone could think what is EOB, it should be just ordinary order block but that’s far from the truth. Sometime the classic order blocks work like a charm, then more often it doesn’t work. If we expecting lower prices to kick in bearish and we see them create a bullish candle leaving a decent sized wick on the bottom, we want to wait for the next candle to completely close below the bullish candle. When we see this, it should be our signal to sell the market. When price does this, it is a clear indication that price want to continue lower. Once EOB is confirmed, look to enter short during the next candles PO3. Usually it’s going to go up but all you need is to wait that very next bar to confirm-respect our new formed EOB. There is many ways to play this and anticipate some of the liquidity below as your safe TP target. Just imagine to use EOB from HTF on LTF. If you can then this indicator is for you, because it is exactly what is doing, it plots EOB from HTF, with lines that clearly present the last two HTF bars (bars that form the EOB), together with EOB zone of interest – from where we want to see price to pullback and respect the narrative – in this example that we are going down. So let’s take a look how the same example (30min TF) will be on lower timeframe, for example on 1min. ... or maybe on 30 seconds timeframe. So let’s try to play this example, with any kind of entry model. For example here we have practically the same scenario, green bar with red closed below, after price tap into EOB zone from HTF. In this example we can anticipate entry at the pullback in LTF EOB zone, or simply from the FVG formed in the EOB confirmation bar, that is the proof that this zone will hold and push us further lower. For target as our TP we could use simple internal structure and nearest liquidity left behind. Easy and quick 4.6R trade. Or if we would like to go further, this could be even better RR. Practically almost 10R. Let’s switch back now to 30min TF, to see how this actually look on respective timeframe of our EOB. I hope it is more then clear, how this could be used. There is option to change colors, lines and size of labels, including option to mark the FVG that is a part of EOB, if there is. Also alerts is there, so you will not miss any new EOB that form on your HTF. Enjoy !
Pine Script® göstergesi
promuckaj tarafından
2
HMG Tools: BacktestHMG Tools is a chart utility indicator designed to improve organization, discipline, and visual context for discretionary traders. This script does not generate buy or sell signals and does not provide investment advice. Its purpose is to enhance the trading workspace by combining several practical tools into a single configurable indicator. Main features: - Sticky notes to write trading rules, reminders, or daily bias directly on the chart - Custom watermark for chart identification and visual clarity - Chart information display, including symbol, timeframe, and current date - DayOff (weekend highlight) to visually mark Saturdays and Sundays and trigger an alert to avoid trading during market closure Purpose: This indicator helps traders keep charts clean and structured, avoid common operational mistakes (such as trading on weekends), maintain discipline through visible notes, and improve consistency in manual trading. This tool is intended for educational and organizational purposes only. -------------------------------------------------- HMG Tools es un indicador de utilidad diseñado para mejorar la organización, disciplina y contexto visual del trader. Este script no genera señales de compra o venta ni constituye asesoramiento de inversión. Su objetivo es optimizar el entorno de trading combinando varias herramientas prácticas en un solo indicador. Funciones principales: - Notas adhesivas para reglas, recordatorios o sesgo diario - Watermark personalizable para identificación visual - Información de símbolo, temporalidad y fecha - Aviso DayOff para evitar operar en fin de semana Uso educativo y organizativo.
Pine Script® göstergesi
HotMarketGuy tarafından
9
SignalViper ReconRecon — Multi-Factor Market State Summary Recon is a market state synthesis and interpretation tool designed to summarize multiple analytical dimensions into a single, readable overview. Instead of presenting raw indicator values, Recon translates trend, momentum, volume, and structure conditions into descriptive market states. The goal of Recon is to reduce cognitive load by helping traders quickly understand what type of market they are currently in, not to provide trade signals. Core Concepts & Logic Recon evaluates several analytical dimensions commonly used across the SignalViper suite, including: Trend Structure Momentum Quality Volume Participation Proximity to Key Structural Levels Each dimension is assessed independently and then combined into a contextual summary that reflects overall market conditions. Recon does not require other indicators to be loaded on the chart. It performs its own internal evaluation using the same conceptual frameworks. Narrative Interpretation Layer Rather than displaying raw numbers or oscillators, Recon converts evaluated conditions into plain-language descriptions, such as: “Directional momentum strengthening” “Trend continuation with participation support” “Structural resistance nearby with weakening momentum” These descriptions are intended to convey context and risk awareness, not predictions or recommendations. Indicator Families Used Recon belongs to the multi-factor regime analysis and interpretation category. It incorporates elements of trend analysis, momentum evaluation, volume-aware context, and structure awareness. Familiar analytical concepts may be present, but Recon’s value lies in how these factors are synthesized and Fletcherized into readable states. Visual Outputs Explained Summary Table Displays the current evaluation of each analytical dimension in one consolidated view. Color-Coded Status Indicators Colors are used to reflect alignment, neutrality, or conflict across factors for rapid visual scanning. Active Warnings Highlight conditions such as divergence, participation weakening, or structural conflict when detected. All outputs are informational and reflect the current market state. How to Use Recon Recon is designed to be used as a pre-decision context tool. Traders commonly use it to: Confirm whether market conditions align with their strategy Identify conflicting signals before entering a trade Avoid overconfidence during unstable or transitional regimes It is especially useful when used alongside execution-focused tools, but it can also be used independently as a high-level market overview. Why This Script Is Invite-Only Recon’s value comes from how multiple analytical dimensions are evaluated, weighted, and translated into narrative summaries. This interpretation layer significantly reduces the need to mentally reconcile multiple indicators and helps traders maintain consistency during live decision-making.
Pine Script® göstergesi
signalviper tarafından
SignalViper VenomVenom — Volume Pressure & Participation Analysis Venom is a volume-pressure and participation analysis tool designed to evaluate whether buying or selling pressure is dominating recent price movement. Instead of forecasting direction, Venom focuses on measuring imbalance, agreement, and conflict between price movement and volume behavior. The script presents this information as an oscillator, helping traders visualize who is exerting pressure and how stable that pressure is over time. Core Concepts & Logic Venom evaluates volume activity in relation to price movement to determine relative pressure, not absolute volume levels. Its analysis focuses on: Buying vs Selling Pressure Measures whether volume participation favors upward or downward movement. Pressure Stability Identifies whether participation is sustained or weakening. Participation Conflict Highlights conditions where buying and selling forces are closely balanced. Based on these factors, Venom classifies pressure into distinct control states. Indicator Families Used Venom belongs to the volume-aware momentum and participation family of indicators. It uses volume-weighted evaluation rather than raw volume bars, allowing pressure conditions to be compared consistently across symbols and timeframes. Visual Outputs Explained Pressure Oscillator Displays relative buying or selling pressure: Cyan tones indicate buying pressure dominance Magenta tones indicate selling pressure dominance Control States BUYERS: volume pressure supports upward movement SELLERS: volume pressure supports downward movement CONTESTED: participation is balanced or conflicted Pressure Signal Line Acts as a smoothing and confirmation reference to help assess pressure shifts. Divergence Markers Appear when price movement and pressure behavior begin to disagree, indicating possible participation exhaustion or transition, not guaranteed reversals. Information Table Provides a real-time summary of current pressure direction and control state. All visuals are directly tied to the underlying pressure evaluation. Alerts Venom includes optional alerts for: Pressure state transitions Divergence conditions between price and pressure Alerts are designed to highlight changes in participation context, not to signal trades. How to Use Venom Venom is intended as a context and confirmation tool. Traders commonly use it to: Assess whether price movement is supported by participation Avoid entries when pressure is conflicted or weakening Monitor potential exhaustion during extended moves It pairs naturally with trend, momentum, or structure-based tools to add a participation layer. Why This Script Is Invite-Only Venom’s value comes from how volume information is interpreted, normalized, and abstracted into readable pressure states and divergence conditions. This allows traders to assess participation without relying on multiple raw volume indicators or manual interpretation.
Pine Script® göstergesi
signalviper tarafından