Şimdi başlat

Bitcoin (Kriptopara)

The Impossible TraderTHE IMPOSSIBLE TRADER A simple, but effective High Freq Strategy script based on MACD or RSI trend, with extra customizable Alert Messages for Bots. WHAT IT DOES This script (works best at lower TimeFrames) just follow the trend of MACD or RSI on your asset. Why it should work? Because in an upper trend, there are more chance of green candles than reds. And in dump trend there are more chance of red candles than greens. While trend is positive, it will try to open Long orders as fast as possible at market price. While trend is negative, it will try to open Short orders as fast as possible at market price. HOW TO SETUP YOUR PREFERENCES Capital : Insert a % of Margin you want to use for your positions (usually 30% is quite good) Leverage : Choose leverage based on your plans Trail Tick @ : This value (in Tick) tell the script "when" the "Trail Stop" order must be activated (from the Entry price) Offset Tick @ : This is the price (in Tick) from the Trail Stop Price activated. Basically it is a Stop Loss that follow the price at a fixed distance. SL Tick @ : Set a Stop Loss at amount Tick distance from the Entry Price. (Let's call it a Safety Stop Loss for bad decisions...) TP Tick @ : Set a Take Profit at amount Tick distance from the Entry Price. Sometimes is better to exit in full Gain than keep positions. Strategy : You can choose a Only Long, Only Short or Long+Short sametime strategy. with MACD or RSI : You can try the strategy applied on MACD or applied on customizable RSI EMA EMA : If you choosed RSI EMA, you can set any value for your testing (usually 80-120 works very nice) Exit order after bars : Some Exchanges / Brokers apply fixed cost, and a strategy too fast could not be productive. This set will let you to delay the Exit Order on already Opened positions. Keep Stop Loss active : If you are planning a delay for Exit Orders, sometime could be useful to keep activated Stop Loss. Strategy Preset : Some preset I've found interesting, with good results. BackTest Days : If there are too many results and script doesn't work, you can choose a closer range to show results. EXTRA FEATURES On Screen Display : OSD will show you some realtime stats about your strategy, like Asset Tick, Trading Period Range, Drawdown, Gains and not closed trade. Alert Message : You can enter custom Long Entry/Exit and Short Entry/Exit message for your Bots (like AutoView, WunderBit, etc...). When alert is triggered, you can send custom message with {{strategy.order.comment}} in the text field AutoView Alert Message : If you are user of AutoView, you can generate your calls. Those are tested only on Oanda with index like Sp500, US100, Us30. TIPS ON USE Some asset on TradingView require an higher initial capital. Go to this Script Settings -> Properties and rise Initial Capital. Be aware of commissions and spread when evalutating a strategy. Go to this Script Settings -> Properties and set Commission and Slippage Trail Stop and Ticks could be difficult to understand, but very profitable. Please take your time and study how it works. Consider Tick like the minimum movement your asset can do. Ticks occurs "intra-bar", so some of your positions could be closed almost instantly. Consider Trail Stop like a Stop Loss that keep always the same distance from your positions, but never came back . If you are in gain, say of 10 Ticks, and your Trail have 5 Ticks, this means for sure a close at minimum 5 Ticks from Entry Price. On Screen Display will show you Ticks for your asset. This will help you on strategy settings, because not all asset responds on the same way. ONLY LONG EXAMPLE ONLY SHORT EXAMPLE
Pine Script® stratejisi
STABLECOINS_GURU tarafından
5
CDC_BTC Rainbow RoadThis is a simple script intended for use with Bitcoin only. Inspired by Lyn Alden's 2 years SMA channels I decided to make one for myself just for fun but ended up adding a few more lines of code the bands show Fibonacci levels in and outside of the channels. The base line uses a 730 day simple moving average. Each zones can be considered as a general guidelines for accumulation / distribution of wealth in Bitcoin.
Pine Script® göstergesi
piriya33 tarafından
5
Everything Bitcoin [Kioseff Trading]Hello! This script retrieves most of the available Bitcoin data published by Quandl; the script utilizes the new request.security_lower_tf() function. Included statistics, True price Volume Difficulty My Wallet # Of Users Average Block Size api.blockchain size Median Transaction Confirmation Time Miners' Revenue Hash Rate Cost Per Transaction Cost % of Transaction Volume Estimated Transaction Volume USD Total Output Volume Number Of Transactions Per Block # of Unique BTC Addresses # of BTC Transactions Excluding Popular Addresses Total Number of Transactions Daily # of Transactions Total Transaction Fees USD Market Cap Total BTC Retrieved data can be plotted as line graphs; however, the data is initially split between two tables. The image above shows how the requested Bitcoin data is displayed. However, in the user inputs tab, you can modify how the data is displayed. For instance, you can append the data displayed in the floating statistics box to the stagnant statistics box. The image above exemplifies the instance. You can hide any and all data via the user inputs tab. In addition to data publishing, the script retrieves lower timeframe price/volume/indicator data, to which the values of the requested data are appended to center-right table. The image above shows the script retrieving one-minute bar data. Up arrows reflect an increase in the more recent value, relative to the immediately preceding value. Down arrows reflect a decrease in the more recent value relative to the immediately preceding value. The ascending minute column reflects the number of minutes/hours (ago) the displayed value occurred. For instance, 15 minutes means the displayed value occurred 15 minutes prior to the current time (value). Volume, price, and indicator data can be retrieved on lower timeframe charts ranging from 1 minute to 1440 minutes. The image above shows retrieved 5-minute volume data. Several built-in indicators are included, to which lower timeframe values can be retrieved. The image above shows LTF VWAP data. Also distinguished are increases/decreases for sequential values. The image above shows a dynamic regression channel. The channel terminates and resets each fiscal quarter. Previous channels remain on the chart. Lastly, you can plot any of the requested data. The new request.security_lower_tf() function is immensely advantageous - be sure to try it in your scripts!
Pine Script® göstergesi
KioseffTrading tarafından
32
Scalping Alice 3/5INTRO Scalping Alice is a work in progress. I made it to help with my Scalping Long strategy as a helper for entrances. This instance of the indicator is for 3min and 5min chart analysis only. It still needs to further adopt and calibrate multi-frame data, but for the moment it takes from the Daily, the Hourly and the 15min. It is meant to be used WITHOUT candles. This is because, one of the goals I'm trying to achieve is to compress data and leave out unwanted noise. The 3min and 5min candles are very dynamic (specially in the crypto market), so I don't need to know the whole OHLC, but I do need a range. COMPONENTS Small Blob The first component is the current time-frame Price Blob. The top line is the candle Highs and the bottom line is the candle Lows. The Price Blob's Color changes according to a Double RSI which you can modify the values for. The default is 13 for the Fast RSI and 34 for the Slow RSI. When the Fast RSI is on top it turns Green. When the Slow RSI is on top it turns Red. Big Blob The Outer Blob is the same as the inner blob, but in the 15min time-frame. It changes color the exact same way, but with 15min values. WMA Line The closest line to the blob is the WMA line. You can change the default value, which is 21. The color changes according to a complex modifier, that I will try to explain, but most likely fail. It takes a sort of Tenkan (see Ichimoku Cloud if you don't know what a Tenkan is) value from the 15min chart and the Hourly chart. It then compares the difference from these Tenkans and adds it to the 15min mid price. And finally tries to find a fast Trend of the movement of the price for the last 3 candles. The Tenkan value can be changed from it's default 3. Be wary, this changes the Tenkans for all the timeframes. Blue Tenkan The slower line is an Hourly Tenkan but with a value of 9. Saturation Clouds The last piece are the orange Saturation Clouds. These appear in bigger price movements and work weirdly. They are differences between Hourly Tenkan and current frame Tenkan, along added to the mid point of the price and a little bit of Bollinger math. Again, hard to explain, but they are very useful. Maybe one of the most useful parts of Alice. BULL AND BEAR Bullish : - Green Small Blob - Green Big Blob - Green WMA - Small Price Blob Above WMA - Small Price Blob Above Blue Tenkan - Small Price Blob Inside Upper Saturation Cloud - Lower Saturation Cloud appears but DOES NOT touch Small Price Blob Bearish - Red Small Blob - Red Big Blob - Red WMA - Small Price Blob Below WMA - Small Price Blob Below Blue Tenkan - Small Price Blob Inside Lower Saturation Cloud - Upper Saturation Cloud appears but DOES NOT touch Small Price Blob SMALL TIPS Saturation Clouds When the Saturation Clouds appear, it is an indication of strong price decision. If it appears but it is far from the Small Blob then this indicates Price Reversal. Most likely a nice moment to enter an opposite trend trade. If the cloud appears touching the Small Blob and the Small Blob enters the cloud, this is Trend Confirmation. The price is going to go strongly towards the Trend is is on. Most likely a nice moment to enter an accompanying trend trade. Price Bounce The Small Blob bounces inside the Big Blob. This is very useful for numerous short plays. You have better chances opening longs when the price is on the Lower parts of the Blobs. The same goes for shorts on the Upper Parts. Slow and Fast The color of the WMA is a very fast indicator, it's the least reliable one. Then comes the Small Blob color, then comes the WMA itself. Following that you have the Big Blob color, then the blue Tenkan. And finally the Saturation Clouds are the most reliable part. FINAL THOUGHTS This is a publishable version of this strategy. I hope to keep working on these types of strategies, maybe even upgrading this one. Enjoy, share and leave comments!
Pine Script® göstergesi
nanunaki tarafından
2
Bot fib/pivot Hello, friends! This strategy is based on the fibonacci level you choose in the setup and possible pivot points under the control of Williams’ Percent Range. Williams' Percent Range is a dynamic indicator that detects overbought/oversold conditions. When the possible reversal points coincide with the fibonacci level, and the high or low points according to Williams also coincide, then an entry occurs. One of the oldest and most reliable trading tools are widely used support and resistance levels. In this strategy, we are trying to find these reversal levels based on fibonacci. //LOGIC ENTRY SETTINGS Deviation-deviation from the pivot point, the lower this figure, the more entries. The yellow lines on the chart are pivot points. Fibonacci lvl-fibonacci level, from which the entry will occur, provided that other conditions match Highest lookback-The setting, which refers to Williams' Percent Range , looks at how many candles ago, was high or low. The smaller the number, the larger, but less accurate inputs. //AMOUNT(USDT) FIRST ORDER AND > % NEXT -Martingale first order (the amount of the entrance to the usdt) / next order (Increase of each subsequent order as a percentage) //EXIT SETTINGS (%, RSI) -Use RSI for close position? (the position will not be closed if it is in the red, even if the RSI conditions worked) -Use % for exit? Exit immediately upon reaching the specified percentage -Use trailing? When the checkbox is checked, the position will be exited by trailing. Activation trail,after?- When the specified percentage is reached, trailing is activated! Stop_trail,%- if the last candle falls from the high (after the trailing is activated), the position will be exited. For example: We entered the purchase at 100 per asset, activation costs 10, and stop is 2. the price reached 110, there was an activation, after that it went up to 120, and from the high of the last candle, a 2% drop occurs and the trade is exited. PS:The default value is 1%, what does this give us? if there is a sharp increase, then we take away all the movement Use only long? Allow long?- Only long trades will be displayed Allow short? Only short trades will be displayed Allo reverse? Upon receipt of a return signal, the opposite position will be closed. //MARTINGALE GRID If there is a check mark in the line "Use martingale and grid?" then the grid will be active If there is a check mark in the "Limit each next entry,%?" then, even if the entry from the bot logic is triggered, and the price does not fall by the specified percentage, then there will be no entry! If there is a check mark in the "Grid,%" column, then purchases with martingale support will be added with a decrease by the specified percentage! PS: "Grid" always starts anew, as the input from logic triggered! //FILTER SETTINGS 1) Use filter oscillator? (The filter uses 7 averaged oscillators) Period-the period for which you will be billing Upper line-Short entry border. (if 40, then there will be no entry until it reaches) Lower line-Long entry border. (20 until below 20 no entry) 2)Use filter range? Filter type-moving average selection Bars back-offset speed based on number of last bars Period-period to calculate 3)Use filter supertrend? Supertrend filter with multitimeframe // How do filters work 2 and 3? Filters can work either one by one or together. A trade is entered when conditions from the logic and filters in the red zone are triggered, when there are no entries in the green zone. //DATA RANGE: -Testing results for any period of time //PIRAMIDING -Also in the settings there is a pyramid of order, keep this in mind. Make a deal for a small part of the deposit, and not for all the money at once! PS: to use martingale, you need to write in the hook messages: "amount": "{{strategy.order.contracts}}" (purchases will be in the amount of coins equivalent to USDT) The default settings for TF are 1 minute, 10 inputs. You can choose your settings for any TF, but look at different coins to make sure you have good statistics
Pine Script® stratejisi
graal_tut tarafından
15
Bitcoin OnChain & Other MetricsHi all,   In these troubled times, going back to fundamentals can sometimes be a good idea 😊 I put this one up using data retrieved from “Nasdaq Data Link” and their “Blockchain.com” database. Here is a good place to analyses some Bitcoin data “outside” its price action with 25 different data sets. Just go to the settings menu and display the ones you are interested in. If you want me to add more metrics, feel free to DM or comment below!   Hope you enjoy 😉  
Pine Script® göstergesi
LucasVivien tarafından
Sideways Strategy DMI + Bollinger Bands (by Coinrule)Markets don’t always trade in a clear direction. At a closer look, most of the time, they move sideways. Relying on trend-following strategies all the time can thus lead to repeated false signals in such conditions. However, before you can safely trade sideways, you have to identify the most suitable market conditions. The main features of such strategies are: Short-term trades, with quick entries and quick exits Slightly contrarian and mean-reversionary Require some indicator that tells you it’s a sideways market This Sideways DMI + Bollinger Bands strategy incorporates such features to bring you a profitable alternative when the regular trend-following systems stop working. ENTRY 1. The trading system requires confirmation for a sideways market from the Directional Movement Index (DMI) before you can start opening any trades. For this purpose, the strategy uses the absolute difference between positive and negative DMI, which must be lower than 20. 2. To pick the right moment to buy, the strategy looks at the Bollinger Bands (BB). It enters the trade when the price crosses over the lower BB. EXIT The strategy then exits when the move has been exhausted. Generally, in sideways markets, the price should revert lower. The position is closed when the price crosses back down below the upper BB. The best time frame for this strategy based on our backtest is the 1-hr. Shorter timeframes can also work well on certain coins that are more volatile and trade sideways more often. However, as expected, these exhibit larger volatility in their returns. In general, this approach suits medium timeframes. A trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange.
Pine Script® stratejisi
Coinrule tarafından
3
Three EMAs Trend-following Strategy (by Coinrule)Trend-following strategies are great because they give you the peace of mind that you're trading in line with the market. However, by definition, you're always following. That means you're always a bit later than your want to be. The main challenges such strategies face are: Confirming that there is a trend Following the trend, hopefully, early enough to catch the majority of the move Hopping off the trade when it seems to have run its course This EMA Trend-following strategy attempts to address such challenges while allowing for a dynamic stop loss. ENTRY The trading system requires three crossovers on the same candle to confirm that a new trend is beginning: Price crossing over EMA 7 Price crossing over EMA 14 Price crossing over EMA 21 The first benefit of using all three crossovers is to reduce false signals. The second benefit is that you know that a strong trend is likely to develop relatively soon, with the help of the fast setup of the three EMAs. EXIT The strategy comes with a fixed take profit and a volatility stop, which acts as a trailing stop to adapt to the trend's strength. That helps you get out of the way as soon as market conditions change. Depending on your long-term confidence in the asset, you can edit the fixed take profit to be more conservative or aggressive. The position is closed when: The price increases by 4% The price crosses below the volatility stop. The best time frame for this strategy based on our backtest is the 4-hr. Shorter timeframes can also work well, although they exhibit larger volatility in their returns. In general, this approach suits medium timeframes. A trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange.
Pine Script® stratejisi
Coinrule tarafından
3
Optimised RSI strategy for Reversals (by Coinrule)The most common way to use the RSI to spot a good buy opportunity is to check for values lower than 30. Unfortunately, the RSI can remain in oversold territory for long periods, and that could leave you trapped in a trade in loss. It would be appropriate to wait for a confirmation of the trend reversal. In the example above I use a short-term Moving Average (in this case, the MA9) coupled with an RSI lower than 40. This combination of events is relatively rare as reversal confirmations usually come when RSI values are already higher. As unusual as this setup is, it provides buy-opportunities with much higher chances of success. The parameters of this strategy would be: ENTRY: RSI lower than 40 and MA9 lower than the price TAKE PROFIT and STOP-LOSS with a ratio of at least 2. That means that if you set up a take profit of 3%, your stop-loss shouldn’t be larger than 1.5%. The advantage of this approach is that it has a high rate of success and allows you the flexibility of setting up the percentages of the take profit and stop-loss according to your preferences and risk appetite.
Pine Script® stratejisi
Coinrule tarafından
Cryptogrithm's Secret Momentum and Volatility IndicatorThis indicator is hard-coded for Bitcoin, but you may try it on other asset classes/coins. I have not updated this indicator in over 3 years, but it seems to still work very well for Bitcoin. This indicator is NOT for beginners and is directed towards intermediate/advanced traders with a sensibility to agree/disagree with what this indicator is signalling (common sense). This indicator was developed back in 2018 and I has not been maintained since, which is the reason why I am releasing it. (It still works great though! At the time of this writing of May 2022). How to use: Terms: PA (Price Action): Literally the candlestick formations on your chart (and the trend formation). If you don't know how to read and understand price action, I will make a fast-track video/guide on this later (but in the meanwhile, you need to begin by learning Order-Flow Analysis, please google it first before asking). CG Level (Cryptogrithm Level/Yellow Line): PA level above = bullish, PA level below = bearish CG Bands (Cryptogrithm Bands): This is similar to how bollingers work, you can use this the same was as bollinger bands. The only difference is that the CG bands are more strict with the upper and lower levels as it uses different calculations to hug the price tighter allowing it to be more reactive to drastic price changes (earlier signals for oversold/overbought). CG Upper Band (Red Upper Line): Above this upper bound line means overbought. CG Middle Band (Light Blue Line): If PA trades above this line, the current PA trend is bullish continuing in the uptrend. If PA trades below this line, the current PA trend is bearish continuing in the downtrend. This band should only be used for short-term trends. CG Lower Band (Green Lower Line): Below this lower bound line means oversold. What the CG Level (yellow line) tells you: PA is trading above CG Level = Bullish PA is trading below CG Level = Bearish Distance between CG Level and price = Momentum What this means is that the further away the price is from the CG Level, the greater the momentum of the current PA trend. An increasing gap between the CG Level and PA indicates the price's strength (momentum) towards the current upward/downward trend. Basically when the PA and CG Level diverge, it means that the momentum is increasing in the current trend and when they converge, the current trend is losing momentum and the direction of the PA trend may flip towards the other direction (momentum flip). PA+CG Level Momentum: To use the CG Level as a momentum indicator, you need to pay attention to how the price and the CG level are moving away/closer from each other: PA + CG Level Diverges = Momentum Increasing PA + CG Level Converges = Momentum Decreasing Examples (kind of common sense, but just for clarity): Case 1: Bullish Divergence (Bullish): The PA is ABOVE and trending AWAY above from the CG Level = very bullish, this means that momentum is increasing towards the upside and larger moves will come (increasing gap between the price and CG Level) Case 2: Bearish Convergence (Bearish): - The PA is ABOVE the CG Level and trending TOWARDS the CG Level = bearish, there is a possibility that the upward trend is ending. Look to start closing off long positions until case 1 (divergence) occurs again. Case 3: Neutral - The PA is trading on the CG Level (no clear divergence or convergence between the PA and CG Level) = Indicates a back and forth (tug of war) between bears and bulls. Beware of choppy price patterns as the trend is undecisive until either supply/liquidity is dried out and a winner between bull/bear is chosen. This is a no trade zone, but do as you wish. Case 4: Bearish Divergence (Bearish): The PA is BELOW and trending AWAY BELOW from the CG Level = very bearish, this means that momentum is increasing towards the downside and larger downward moves will come (increasing gap between the price and CG Level). Case 5: Bullish Convergence (Bullish): - The PA is BELOW the CG Level and trending TOWARDS the CG Level = bullish, there is a possibility that the downward trend is ending and a trend flip is occuring. Look to start closing off short positions until case 4 (divergence) occurs again. CG Bands + CG Level: You can use the CG bands instead of the PA candles to get a cleaner interpretation of reading the momentum. I won't go into detail as this is pretty self-explanatory. It is the same explanation as PA+CG Level Momentum, but you are replacing the PA candles with the CG Bands for interpretation. So instead of the PA converging/diverging from the CG Level, the Upper and Lower Bound levels are converging/diverging from the CG level instead. Convergence: CG Level (yellow line) trades inside the CG bands Divergence: CG Level (yellow line) trades outside the CG bands Bullish/Bearish depends on whether the CG Band is trading below or above the CG level. If CG Band is above the CG Level, this is bullish. If CG Band is below the CG level, this is bearish. Crosses (PA or CG Band crosses with CG level): This typically indicates volatility is incoming. There are MANY MANY MANY other ways to use this indicator that is not explained here and even other undiscovered methods. Use some common sense as to how this indicator works (it is a momentum indicator and volatility predictor). You can get pretty creative and apply your own methods / knowledge to it and look for patterns that occur. Feel free to comment and share what you came up with!
Pine Script® göstergesi
Cryptogrithm tarafından
Crypto Correlation Strategy based on Technical Ratings This is a swing trading crypto correlation strategy, based initially on technical ratings but adapted to the entire crypto market environment , by using as a source of calculations the candle values from CRYPTOCAP:TOTAL. So since TOTAL, is the sum of all the crypto currencies, its going to be our leader. We will get the entries and exits , internally from it and input them into the crypto coins(more than 80-90% of the usdt perpetual pairs are following the same direction but with a higher volatility), and with this in general is going to give us as much better risk/reward than just by trading 1 coin alone. So this means that all coins will enter and exit at the same time forom a trade. With this, since sometimes we have sudden big changes in the price form one side to another, is going to break a little this effect and since the initial movements were bigger, it would make us lose less. At the same time it can also make us lose more if the changes happen to soon. One of the things of this particular idea is we dont have to worry about particular optimizations for each asset/coin. This scenario has been adapted for 30min timeframe, using 0.1% comission per entry and 0.1% comission for exit from the trade. I have tested so far with most USDT Perpetual Pairs from binance, and it seems to give good results with most of the pairs. If you have any question please let me know !
Pine Script® stratejisi
exlux tarafından
3
Maddrix_club III (strategy)Maddrix club III (STRATEGY) is an advanced trading algorithm that goes long and short in spite of the market condition. It aims to capture large moves. It is the fruit of over a thousand hours of work, trials, errors, research, etc. The STUDY version is also posted. There are 5 main variables to adjust the indicator: Framework length – Use this to establish the environment. Shorter length = volatile environment. Longer length = steadier. Framework multiplier – Use this to adjust the environment to the asset. Lower value for less volatile price action and higher value for very volatile price action. Search timeframe – Use this to lookback for a fractal . In theory, the longer the lookback the more reliable the fractal recognition. Trigger line – Use this to adjust the trigger level. In theory, the lower the trigger the more signals you get. Threshold – Use this to filter the signals. The higher the threshold, the less signal you get. The best way to go about changing the settings, is to start off the default value. I’d do a monthly check-in playing with few of them and readjusting based on results from the exchange. They are different, as this one can show you the equity curve. It works on many markets as long as there is sufficient activity to create patterns and repetition. You will notice a slight difference between the strategy calculation and the algo calculation (built in the algo) - this is because the exits are not exactly at the same levels. I left this on purpose, so that you can see that even with a little slippage, overall this is positive. Very good results have been observed on the 15 min time frame though it technically works on all timeframe (5 min for example, 1 hour also). On the example above ETHUSDT – 15 min, the back test shows consistency in the results for the last 2 years. The theory behind it is based on probabilities, human emotions, and repetition in market patterns. Results have also shown great adaptability, meaning the total profits don’t change considerably when we play with settings. This is very good because even if you try to fine tune a set of settings to the past, the probability that it keeps working in the future is rather high. Very important note: the calculations DO NOT take into account any fee or slippage that you always experience on the exchanges. The indicators only uses real time data, therefore it can’t repaint. There are absolutely no guarantees about this algorithm and past results are not indicative of future performance. Fees, slippage and API delay: for any algorithm you will use (from me or others), please keep in mind that fees add up, slippage and delay creates differences between algo theory and reality. We can put in place systems to circumvent that, but we will always have them.
Pine Script® stratejisi
Maddrix_club tarafından
VMC Oracle This is Oracle. It is a momentum driven indicator with behind-the-scenes filters designed to best indicate the oversold and overbought points on most assets. Oracle partially uses a regression equation displayed in line format with a predetermined spacing to indicate different support and resistance points within the last 100 bars. When used in combination with the smoothed oscillator and moving averages it becomes a powerful tool in your box. It is important to keep in mind that because this indicator is always looking at the last 100 bars the user will need to use the “replay” function on Tradingview for the best manual back-testing to the triggers as possible. It should become clear that when its in the red zone above the ‘zero’ line that the potential for downward movement is greater. The bottom or below ‘zero’ green zone indicates a potential time to buy. In addition to the regression lines, the indicator is supplied with a basic moving average application involving cross analysis. The two lines in cooperation help the user determine when the overall trend is shifting. As an example, when the overall trend may be indicating a bearish market or downtrend it may be beneficial to consider any of Oracle’s triggers that may be opposite more closely. Some of the alerts will trigger in what appears to be opposite trending areas such as a buy trigger when the averages indicate a bearish period. When this happens, it is up to the user utilize other confirmation type tools to assist in the decision of the oracle triggers. The reason for this is that Oracle is designed to predict the change in the market before or during a peak or through area on the graph. The success can be large but this can reduce the automatic trigger’s success in which loss management must be executed. The custom alert function built in is designed to automate the visual comparisons of the two items above. By considering trend, immediate resistance and support lines, and momentum we can help visually indicate the points of possible exhaustion in either direction. When setting up the alert it's as simple as a new alert creation and selecting the VMC Oracle Indicator in the top drop down. After that its as simple as selecting Long Alert or Short alert. As with any tool it is recommended to understand the asset being traded and providing yourself with the best risk management rules to minimize unfavorable movements.
Pine Script® göstergesi
vumanchu tarafından
14
OptimaLiteThe OptimaLite algorithm performs the calculation of the integrated profits and losses for all the buyers and sellers that they have for the given “Calculation period” back in history for every time point. The idea is based on the principle of the accumulation and distribution of the capital among the market participants leading to the price trend change. The indicator consists of the several components (signal lines): 1) “Return” – the main signal that reflects the integrated profits and losses delta (the “Return” moving average is added) 2) “Profit” and “Loss” – integrated profits and losses correspondingly 3) “Return Normalized” – the normalized “Return” for a given period of time 4) “Return High Frequency” – the “Return” signal compensated with the short-term fluctuations by RSI How to use the indicator: – Highs and lows of the indicator are associated with the overbought and oversold conditions points correspondingly. – Crosses of the moving average with the main indicator line are associated with the trend change – Divergencies between the indicator and price highs or lows can be used as signals for the trend reversal – “Profit” and “Loss” signal lines intersections indicate the bulls/bears take over the market Adjustments: The periods of the calculation, averaging and normalization are the main parameters that could be tuned in order to optimize the indicator performance. Generally, the default values are sufficient for the nominal performance thought. But the best combination of those parameters is specific for each asset and timeframe, so it recommended to optimize them.
Pine Script® göstergesi
Crypto-Hamster tarafından
Stochastic Moving AverageHi all, This Strategy script combines the power of EMAs along with the Stochastic Oscillator in a trend following / continuation manner, along with some cool functionalities. I designed this script especially for trading altcoins, but it works just as good on Bitcoin itself and on some Forex pairs. ______ SIGNALS ______ The script has 4 mandatory conditions to unlock a trading signal. Find these conditions for a long trade below (works the exact other way round for shorts) - Fast EMA must be higher than Slow EMA - Stochastic K% line must be in oversold territory - Stochastic K% line must cross over Stochastic D% line - Price as to close between slow EMA and fast EMA Once all the conditions are true, a trade will start at the opening of the next ______ SETTINGS ______ - Trade Setup: Here you can choose to trade only longs or shorts and change your Risk:Reward. You can also decide to adjust your volume per position according to your risk tolerance. With “% of Equity” your stop loss will always be equal to a fixed percentage of your initial capital (will “compound” overtime) and with “$ Amount” your stop loss will always be 'x' amount of the base currency (ex: USD, will not compound) Stop Loss: The ATR is used to create a stop loss that matches current volatility. The multiplier corresponds to how many times the ATR stop losses and take profits will be away from closing price. - Stochastic: Here you can find the usual K% & D% length and overbought (OB) and oversold (OS) levels. The “Stochastic OB/OS lookback” increase the tolerance towards OB/OS territories. It allows to look 'x' bars back for a value of the Stochastic K line to be overbought or oversold when detecting an entry signal. The “All must be OB/OS” refers to the previous “Stochastic OB/OS lookback” parameter. If this option is ticked, instead of needing only 1 OB/OS value within the lookback period to get a valid signal, now, all bars looked back must be OB/OS. The color gradient drawn between the fast and slow EMAs is a representation of the Stochastic K% line position. With default setting colors, when fast EMA > slow EMA, gradient will become solid blue when Stochastic is oversold and when slow EMA > fast EMA, gradient will become solid blue when Stochastic is overbought - EMAs: Just pick your favorite ones - Reference Market: An additional filter to be certain to stay aligned with the current a market index trend (in our case: Bitcoin). If selected reference market (and timeframe) is trading above selected EMA, this strategy will only take long trades (vice-versa for shorts) Because, let’s face it… even if this filter isn’t bulletproof, you know for sure that when Bitcoin tanks, there won’t be many Alts going north simultaneously. Once again, this is a trend following strategy. A few tips for increased performance: fast EMA and D% Line can be real fast… 😉 As always, my scripts evolve greatly with your ideas and suggestions, keep them coming! I will gladly incorporate more functionalities as I go. All my script are tradable when published but remain work in progress, looking for further improvements. Hope you like it!
Pine Script® stratejisi
LucasVivien tarafından
15
Fukuiz Octa-EMA + Ichimoku (Strategy)This strategy is based EMA of 8 different period and Ichimoku Cloud which works better in 1hr 4hr and daily time frame. #A brief introduction to Ichimoku # The Ichimoku Cloud is a collection of technical indicators that show support and resistance levels, as well as momentum and trend direction. It does this by taking multiple averages and plotting them on a chart. It also uses these figures to compute a “cloud” that attempts to forecast where the price may find support or resistance in the future. #A brief introduction to EMA# An exponential moving average ( EMA ) is a type of moving average (MA) that places a greater weight and significance on the most recent data points. The exponential moving average is also referred to as the exponentially weighted moving average . An exponentially weighted moving average reacts more significantly to recent price changes than a simple moving average ( SMA ), which applies an equal weight to all observations in the period. #How to use# The strategy will give entry points itself, you can monitor and take profit manually(recommended), or you can use the exit setup. EMA (Color) = Bullish trend EMA (Gray) = Bearish trend #Condition# Buy = All Ema (color) above the cloud. SELL= All Ema turn to gray color.
Pine Script® stratejisi
Fukuiz tarafından
15
super SSL [ALZ]This script is designed and optimized for MULTI TIME by Ali Zebardast (ALZ) 1.in part of ssl Original Version credits to Mihkel00 Actual Version i just set alerts and change the parameters for BTCUSDT 1min Chart. He designed for daily time. I tried to optimize 1 min time-frame . And fix the errors with OTT "This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation trades and a third SSL for exit trades. Alerts added for Baseline entries, SSL2 continuations, Exits. Baseline has a Keltner Channel setting for "in zone" Gray Candles Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range." 2.in part of Range two Filter Buy and Sell for 3min Wait For Bar close ssl2 :Be under the candle for buy and The bar color must confirm the order of purchase (Blue) 3.in part of OTT when candles close over HOTT, means an UPTREND SIGNAL and to Fuchia when candles begin closing under LOTT line to indicate a DOWNTREND SIGNAL. FLAT ZONE is highlighted also to have the maximum concentration on sideways market conditions. There are three quantitative parameters in this indicator: The first parameter in the OTT indicator set by the two parameters is the period/length. OTT lines will be much sensitive to trend movements if it is smaller. And vice versa, will be less sensitive when it is longer. As the period increases it will become less sensitive to little trends and price actions. In this way, your choice of period, will be closely related to which of the sort of trends you are interested in. The OTT percent parameter in OTT is an optimization coefficient. Just like in the period small values ​​are better at capturing short term fluctuations, while large values will be more suitable for long-term trends. The final adjustable quantitative parameter is HIGHEST and LOWEST length which is the source of calculations. Credits go to: SSL Hybrid www.tradingview.com HIGH and LOW OTT : www.tradingview.com Range Filter www.tradingview.com
Pine Script® göstergesi
AliZebardast tarafından
2