Şimdi başlat

Ortalama Yönsel Endeks (ADX)

30 Min Scalp SystemA scalping script for the 30 min chart that is designed and tuned to be used with trading bots such as ProfitView or Autoview. I personally trade with this on Bitmex. This trading system is built upon 4 established trading indicators that compliment each other. All signals are filtered in a number of ways to avoid chop and only trigger when a strong trend or crossover is identified. Alerts are included for longs, shorts and exits in both directions. Recommended setup: - Trade with leverage and take 75%-80% out at 0.5% profit, leaving the rest to run - Initial stop-loss of 1%, initiating a trailing stop of 0.75% when TP is hit - Ensure bots are set to ignore open orders in the same direction I use this in conjunction with ProfitView where I run three custom scripts to manage my position entries, monitor profit levels, dynamically move my stop and then exit positions where appropriate. Note: Exit signals are show here even when trades aren't open because it's only possible to hide these when using a strategy script. This is coded as an indicator so that alerts can be sent to your chosen bot. Disclaimer: The signals aren't perfect but no script is. The above cannot be considered financial advice and I take no responsibility from any losses incurred. A test account is recommended to verify the win rate before trading on a live platform.
Pine Script® göstergesi
colinmck tarafından
16
[KICK] Ultimate ADXDMIThis indicator is a version of the ADX and DMI indicators optimized for maximum information conveyance related to trending price action in a compact space. Use the ADX barchart to determine strength of trend. There are various configurable thresholds for this measurement as well as peak marking within the exhaustion zone. The higher the values in the bar chart, the stronger the trend. Low values indicate non-trending or choppy price action. Use the DMI line graphs (as well as the color codes on the ADX barchart) to determine trending direction. You can offset the DI+ and DI- lines so that they are not directly on top of the ADX chart. When the DI+ is on top (blue line by default) the trend is up and when the DI- line (yellow by default) is on top the trend is down. The colors of the ADX chart also indicate direction with red indicating down and green indicating up. The "pale" shades indicate a nacent/immature trend, "bright" shades indicate a solid trend, and the "darker" shades indicate a strong trend that is mature. Look for these mature trends to "top out" and have their peaks marked when the trend has exhausted itself (note that the peak indicators will repaint 1-2 candles in the past after the "high" is confirmed). You can specify up to 3 additional timeframes to monitor in the dot map below the ADX chart that will give you a generalized idea of the trend on those larger timeframes. In these heat maps, the color red indicates a down trend and green an up trend. The brighter colors denote strong trends while the darker colors are weaker. Grey dots in the heat map indicate no strong trend present. Some users actually prefer to turn off the main ADX and DMI visualizations and only display the multi-timeframe heatmap as a way of checking higher timeframe trends before entering their trades. Use the link below to watch a tutorial video, request a trial, or purchase for access.
Pine Script® göstergesi
CryptoKick tarafından
3
[PX] ADX and DI v4Hey guys, I recently used the "ADX and DI" indicator in a variety of my own scripts. Because I keep on developing version 4 scripts and the "ADX and DI" indicator is developed in one of the previous PineScript versions, I had to update the old script every time I wanted to use it. I decided to publish the updated version and also changed a few things: - ADX color is now orange - Instead of plotting the DI+ and DI- lines, it's filling the space between the two (can be changed in the "style"-section) Maybe some of you find it useful. If so, leave a like or follow :) Happy trading, paaax P.S: The original indicator was developed by the user @MasaNakamura. Thanks for your great work!
Pine Script® göstergesi
paaax tarafından
6
MTF Average Directional Index Range DetectorHigher Timeframe ADX to detect range/trending market while trading lower time frames. Change the resolution in the parameters. You must use a time frame equal or higher to the current time frame. Red = Range Green = Trending Use the alerts to get notified when the color changes. Adjust the Threshold parameter to change the value from which the color changes. Click Add to favorites to get the indicator on your chart (it will appear in the Indicators->Favorites tab). Leave a like if you find it useful!
Pine Script® göstergesi
cyatophilum tarafından
4
(JS)DMI BarsAlright - so this is my own version of John Carter's "10x Bars"... I have done multiple things that are different from his version so they are slightly different.. So first of all the main indicator is based off of the ADX and the DMI; For those who aren't familiar with it, Directional Movement is what you'd pull up under "built-in's" from the indicators tab (if you want to check it out). The standard interpretation of this however, is when the ADX is above 20 that suggests the trend is strong, whereas under 20 suggests it is weak. Also, when the D+ is above the D- that suggests a bullish trend, and D- above D+ suggests a bearish trend. These bars take away the need to have it at the bottom of your screen, and places the data on the bars on your chart instead. ========================================================================================================================================= So here's what the colors stand for - Yellow - The ADX is under 20, no strength in trend Shades of green occur when the ADX is above 20 and there's a bullish trend (D+ higher than D-) Bright Green (Lime) - Bullish trend, D+ above 30 Green - Bullish Trend Yellow Green - Bullish trend, D+ below 15 Shades of red occur when the ADX is above 20 and there's a bearish trend (D- higher than D+) Bright Red - Bearish trend, D- above 30 Red - Bearish Trend Orange - Bearish trend, D- below 15 ========================================================================================================================================= I have also added multiple time frame labels (label script used is the one created by Ricardo Santos) These labels are color coded the same as the bars/candles, and they appear off to the right of your screen using every built in time increment from TradingView. The purpose is to show you in real time, and on any chart resolution, what the current trend is on every individual time frame. So using just one single chart you'll see your current resolutions candles, but also on the labels you'll see: 1 Minute 3 Minute 5 Minute 15 Minute 30 Minute 45 Minute 1 Hour 2 Hour 3 Hour 4 Hour Daily Weekly Monthly There is an input I added that allows you to adjust where your labels appear on the side of your screen as well! ========================================================================================================================================= Now onto the volume spike portion of the indicator. This will plot a blue dot under each bar that has a spike in volume which meets your specified criteria. I have 500% as the default setting. What that means is that this indicator looks back and gets the 50 bar volume average and then applies dots where volume is 500% above average. ========================================================================================================================================= Now finally, the reversal arrows. This is another simple to understand concept that I first read in John Carter's book "Mastering the Trade" that he calls "HOLP/LOHP". I have added the ability to change the look back period you'd like the indicator to watch for highs and lows on. What that stands for is 'High of Low Period' and 'Low of High Period', and it is used like this- Whenever a bar makes a new high the indicator watches the low on that highest bar. Then when a bar afterwards makes a lower low then the one on the high bar, a reversal arrow is given. Apply this same concept in the other direction in for the highs on the lowest bars. ========================================================================================================================================= Now, I didn't want to make a "set" or have a bunch of different indicators out there that are all intended for the same package, so I took the time to put them together, and if there's a part of it you don't care for they can easily be turned off in the settings. Enjoy!
Pine Script® göstergesi
J-Streak tarafından
11
RSX-D [ID: AC-P]The "AC-P" version of Jaggedsoft's RSX Divergence and Everget's RSX script is my personal customized version of RSX with the following additions and modifications: LSMA-D line that averages in three LSMA components to form a composite, the LSMA-D line. Offset for the LSMA-D line is set to -2 to offset latency from averaging togther the LSMA components to form a composite - recommended to adjust to your timeframe and asset/pair accordingly. Divergence component from JustUncle, RicardoSantos, and Neobutane divergence scripts Crossover indication and alerts for Midline, and custom M1 and M2 levels for both RSX and the LSMA-D line from Daveatt's CCI Stochastic Script EMA21/55 zone cross highlighting option SMA9/EMA45 MA option from my RSI sma/ema Cu script Libertus Divergences and Pivot labels from Jaggedsoft's RSX Divergence script are hidden/off by default Designed for darkmode by default. Minor visual changes from Jaggedsoft's and Everget's script(s) for darkmode and visual aesthetic. Please Note: Divergences that use fractal-based detection logic, offset, or a combination of both generally have a 1-2 bar/candle lag. This is an INHERENT limitation of divergence detection with fractals and offsets. Divergences generally will have a higher strikerate on HTF than LTF due to the 1-2 bar lag. While I'm not going to rule out a programming solution or math construct/formula that attempts to alleivates the 1-2 bar lag for divergences, this script is not it - please keep that in mind when using divergence components with a fractal base and offset. LSMA-D is a composite of three LSMA lines, all with offset options. Different lengths and Offset values can compensate/adjust for the smoothing/latency from RSX, but only up to a certain point. For each LSMA, the least square regression line is calculated for the previous time periods, so the idea is that with finely tuned adjustments, you can get crossover/crossunder signals from the RSX with the LSMA-D line that you simply can't get with the SMA9/EMA45 due to the already smoothed RSX. The defaults for the RSX and various components for the LSMA-D here will MOSTLY LIKELY NOT WORK OR BE APPLICABLE to every timeframe and asset that you trade - adjust, backtest, and test accordingly. The defaults are here are MEANT to be adjusted to the asset class and timeframe that you are trading. If you're not familiar with the LSMA, tradingview author Alexgrover has a few great scripts that go into detail how the LSMA works, in addition to different interpretations and implementations of the LSMA. References/Acknowledgements: //@version=4 // Copyright (c) 2019-present, Alex Orekhov (everget) // Jurik RSX script may be freely distributed under the MIT license. // //------------------------------------------------------------------- // Acknowledgements: //---- Base script: // RSX Divergence — SharkCIA by Jaggedsoft // // Jurik Moving Average by Everget // //---- Divergences/Signals: // Libertus RSI Divergences // // Price Divergence Dectector V3 by JustUncle // // Price Divergence Detector V2 by RicardoSantos // // Stochastic RSI with Divergences by Neobutane // // CCI Stochastic by Daveatt // //---- Misc. Reference: // RSI SMA/EMA Cu by Auroagwei // // CBCI Cu by Auroagwei // // Chop and explode by fhenry0331 // // T-Step LSMA by RafaelZioni // // Scripts by Jaggedsoft for structure and formatting // Scripts by Everget for structure and formatting //------------------------------------------------------------------- // RSX-D v08 // Author: Auroagwei // www.tradingview.com //-------------------------------------------------------------------
Pine Script® göstergesi
auroagwei tarafından
15
Fabonacci Trailer - [Alerts]This script comes with the following indicators and features: ADX indicator Chop indicator Super Trend indicator Trailing Take Profit and Stop Loss Entry, Take Profit, and Stop Loss Alerts Renko chart support And a few more indicators in the back-end to increase accuracy and optimize entries This script works really well as a scalper on lower Time Frames as well as on higher Time Frames. Besides that you can also use it on pretty much any coin or asset. This script is not repainting. We advise to use alerts on “Once Per Bar Close”. If you’d like to automate this script you can do that by using AutoView, ProfitView, ProfitTrailer, CryptoHopper etc. Please note that this script is based on invite only.
Pine Script® göstergesi
fabonacci tarafından
9
ADX ColorO ADX avalia tendências de alta e baixa, buscando mostrar um movimento direcional. O indicador é composto por três linhas: DI+, DI- e ADX; Onde o ADX representa o índice das médias do movimento direcional. O DI+ ocorre quando o valor do preço máximo do candle for maior que o do candle anterior, assim, temos um movimento direcional positivo. DI+ = Máx(c) – Máx(c – 1) E o DI- representa o movimento direcional negativo, ele ocorre quando a mínima do candle for menor que a mínima do candle anterior. DI- = Mín(c) – Mín(c-1) Dessa forma, se o ADX e o DI- estiverem acima do DI+ e com ADX subindo acima de 25, será o melhor momento para estar vendido, e que a tendência de baixa é forte. E quando as médias ficam se cruzando entre si, significará que o ativo pode apenas estar em congestão, ou seja sem tendência.
Pine Script® göstergesi
orlandojunior.py tarafından
4
ADX GapperBased on the ADX Gapper strategy described in the book Street Smarts, it looks to exploit retracement to a prevailing trend when there has been a gap away from the trend, giving you multiple potential entries. It uses the ADX to determine a trend and detects when there is a gap to signal an entry day where: You would enter short if the DI-(red line) > DI+ (green line), ADX (blue area) > 30 indicating a strong trend and if there is a gap up from the previous day. If all the described conditions are met then you would place a short stop at the previous day highs and trail a stop until the end of the day. This strategy is meant to give you trades to hold for 1 day (the day you enter) or 2 days if you consider you should hold it overnight.
Pine Script® göstergesi
the_no_factor tarafından
1