Şimdi başlat

Komut dosyalarını "文华财经tick价格" için ara

MACD histogram relative open/closePrelude This script makes it easy to capture MACD Histogram open/close for automated trading. There seems to be no "magic" value for MACD Histogram that always works as a cut-off for trade entry/exit, because of the variation in market price over time. The idea behind this script is to replicate the view of the MACD graph we (humans) see on the screen, in mathematics, so the computer can approximately detect when the curve is opening/closing. Math The maths for this is composed of 2 sections - 1. Entry - i. To trigger entry, we normalize the Histogram value by first determining the lowest and highest values on the MACD curves (MACD, Signal & Hist). ii. The lowest and highest values are taken over the "Frame of reference" which is a hyperparameter. iii. Once the frame of reference is determined, the entry cutoff param can be defined with respect to the values from (i) (10% by default) 2. Exit To trigger an exit, a trader searches for the point where the Histogram starts to drop "steeply". To convert the notion of "steep" into mathematics - i. Take the max histogram value reached since last MACD curve flip ii. Define the cutoff with reference to the value from (i) (30% by default) Plots Gray - Dead region Blue - Histogram opening Red - Histogram is closing Notes A good value for the frame of reference can be estimated by looking at the timescale of the graph you generally work with during manual trading. For me, that turned out to be ~2.5 hours. (as shown in the above graph) For a 3-minute ticker, frame of reference = 2.5 * 60 / 3 = 50 Which is the default given in this script. Ultimately, it is up to you to do grid search and find these hyperparams for the stock and ticker size you're working with. Also, this script only serves the purpose of detecting the Histogram curve opening/closing. You may want to add further checks to perform proper trading using MACD.
Pine Script® göstergesi
devxpy tarafından
1
Twin Range Filter Algo@Colinmck used two different ranges to generate signals. Read his release notes to find out what the original script does. I added one condition which seems to increase performance on 15m BTCUSD as well as 1h BTCUSD and that is ATR with 32 periods being smaller than ATR with 64 periods. I used my script Volatility Optimiser to discover this tendency. Both buying and selling conditions are same as in @Colinmck's script plus one condition of my own. You can disable my condition. Target and stop-loss are manually set values in ticks. Time stop-loss is manually set value in a number of candles. After this number of candles, a position always exits (or should 😇). You can disable it by inserting a very long period. I do not recommend it, because a value of indicator should not be measured in luck and if market starts moving in the direction after 40 periods, the predictive capability of an indicator is questionable. I used 300/150/17 for 15m BTCUSD chart and 900/30/17 for 1h BTCUSD. I didn't try to optimize any other parameters for these periods. Since this script relies mostly on volatility for its prediction, I wouldn't recommend using it on its own. Individual approach to the market is recommended. Also, it didn't work on EURUSD when using the same default values and different order management (tp, sl, time sl), so it is probably not as versatile. Let me know what do you think of this strategy. If you have some ideas about how to make it more reliable, share it in the comments, I might put it to the test. Good luck 🍀
Pine Script® stratejisi
OrcChieftain tarafından
24
Divergence of DecisionPoint Breadth Swenlin Trading [LazyBear]// This source code is subject to the terms of the Mozilla Public License 2.0 at mozilla.org // © 03.freeman //This is indicator from LazyBear is very accurate for stocks and indexes. //I added some code snippets for spot and draw divergences automatically // // @author LazyBear // // Best use with daily time frame. Enter when a divergence is found (Bull or Bear label) and wait at least a couple of candles before exit. Next improvement: alerts ready made for webhooks and screener for multiple tickers. Please use comment section for any feedback.
Pine Script® göstergesi
03.freeman tarafından
6
Strategy Death To The Bear Simple strategy for the indicator "Death To The Bear". Simple rules: - Entry according to the selected weapons. - Take profit 1 (TP1) in% of daily ATR (can be set, default 20%) - Active Stop in Breakeven when I take profit in TP1. - Take profit 2 (TP1) in% of daily ATR (can be set, default 30%) * Pyramidization can be changed from the configuration (maximum number of tickets to average your price) * Many do not like to pyramid, but I can assure you that with good management, and good choice of the instrument and time frame, you will get good money. Note: at the request of some people who cannot see the EMOJI in the configuration you can choose TEXT. Thumbs up
Pine Script® stratejisi
Dreadblitz tarafından
15
Combo Backtest 123 Reversal & D_Three Ten OscThis is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy TradeStation does not allow the user to make a Multi Data Chart with a Tick Bar Chart and any other type a chart. This indicator allows the user to plot a daily 3-10 Oscillator on a Tick Bar Chart or any intraday interval. Walter Bressert's 3-10 Oscillator is a detrending oscillator derived from subtracting a 10 day moving average from a 3 day moving average. The second plot is an 16 day simple moving average of the 3-10 Oscillator. The 16 period moving average is the slow line and the 3/10 oscillator is the fast line. For more information on the 3-10 Oscillator see Walter Bressert's book "The Power of Oscillator/Cycle Combinations" WARNING: - For purpose educate only - This script to change bars colors.
Pine Script® stratejisi
HPotter tarafından
2
Combo Backtest 123 Reversal & D_Three Ten Osc This is combo strategies for get a cumulative signal. First strategy This System was created from the Book "How I Tripled My Money In The Futures Market" by Ulf Jensen, Page 183. This is reverse type of strategies. The strategy buys at market, if close price is higher than the previous close during 2 days and the meaning of 9-days Stochastic Slow Oscillator is lower than 50. The strategy sells at market, if close price is lower than the previous close price during 2 days and the meaning of 9-days Stochastic Fast Oscillator is higher than 50. Second strategy TradeStation does not allow the user to make a Multi Data Chart with a Tick Bar Chart and any other type a chart. This indicator allows the user to plot a daily 3-10 Oscillator on a Tick Bar Chart or any intraday interval. Walter Bressert's 3-10 Oscillator is a detrending oscillator derived from subtracting a 10 day moving average from a 3 day moving average. The second plot is an 16 day simple moving average of the 3-10 Oscillator. The 16 period moving average is the slow line and the 3/10 oscillator is the fast line. For more information on the 3-10 Oscillator see Walter Bressert's book "The Power of Oscillator/Cycle Combinations" WARNING: - For purpose educate only - This script to change bars colors.
Pine Script® göstergesi
HPotter tarafından
1
macd xoverThe MACD XOver indicator was developed by John Bruns to predict the price point at which MACD Histogram will reverse the direction of its slope. The indicator is plotted one day ahead into the future, allowing, if your strategy depends on MACD Histogram, to predict its reversal point for tomorrow (or the next bar in any timeframe). If the closing price tomorrow is above the value of this indicator, then MACD Histogram will tick up. If the closing price tomorrow is below the value of this indicator, then MACD Histogram will tick down. This is especially useful on the charts of the longer timeframes and when using the Impulse system whose color depends in part on the slope of MACD Histogram. Use the same values as the MACD Combo which you want to anticipate. If you use the default values, then accept the values below. Parameters: MACD_Short_Period(12) – The short EMA for the MACD calculation; MACD_Long_Period (26) – The long EMA for the MACD calculation; MACD_Smoothing_Period (9) – The smoothing value for the Signal line; Time_Ratio (1) – The default here is set to 5 (weekly)
Pine Script® göstergesi
Biticon tarafından
2
Volume Volatility SpectrumThis indicator estimates price volatility and it is based on Volume only (presumably Tick Volume in Forex). Tick volume is supposed to be a good proxy to actual volume in spot forex (study of Caspar Marney, 2011) The advantage of this indicator is that it can be used with any pair, any timeframe. The only parameters are the periods of the reference Volume Moving Average and the fast Volume MA. The fluctuations of a short period Volume MA with respect to a gently MA with high period are calculated. RED areas depict low volatility GREEN areas depict high volatility. When the clouds are outside the region delimited by the aqua lines we have extreme conditions: Extremely low volatility = red cloud outside the aqua bands Extremely high volatility = green cloud outside the aqua bands Vitelot/yanez/Vts September 2019. Compare this indicator with the ATR Volatility Spectrum of myself
Pine Script® göstergesi
vitelot tarafından
4
How to avoid repainting when using security() - PineCoders FAQNOTE The non-repainting technique in this publication that relies on bar states is now deprecated, as we have identified inconsistencies that undermine its credibility as a universal solution. The outputs that use the technique are still available for reference in this publication. However, we do not endorse its usage. See this publication for more information about the current best practices for requesting HTF data and why they work. This indicator shows how to avoid repainting when using the security() function to retrieve information from higher timeframes. What do we mean by repainting? Repainting is used to describe three different things, in what we’ve seen in TV members comments on indicators: 1. An indicator showing results that change during the realtime bar, whether the script is using the security() function or not, e.g., a Buy signal that goes on and then off, or a plot that changes values. 2. An indicator that uses future data not yet available on historical bars. 3. An indicator that uses a negative offset= parameter when plotting in order to plot information on past bars. The repainting types we will be discussing here are the first two types, as the third one is intentional—sometimes even intentionally misleading when unscrupulous script writers want their strategy to look better than it is. Let’s be clear about one thing: repainting is not caused by a bug ; it is caused by the different context between historical bars and the realtime bar, and script coders or users not taking the necessary precautions to prevent it. Why should repainting be avoided? Repainting matters because it affects the behavior of Pine scripts in the realtime bar, where the action happens and counts, because that is when traders (or our systems) take decisions where odds must be in our favor. Repainting also matters because if you test a strategy on historical bars using only OHLC values, and then run that same code on the realtime bar with more than OHLC information, scripts not properly written or misconfigured alerts will alter the strategy’s behavior. At that point, you will not be running the same strategy you tested, and this invalidates your test results , which were run while not having the additional price information that is available in the realtime bar. The realtime bar on your charts is only one bar, but it is a very important bar. Coding proper strategies and indicators on TV requires that you understand the variations in script behavior and how information available to the script varies between when the script is running on historical and realtime bars. How does repainting occur? Repainting happens because of something all traders instinctively crave: more information. Contrary to trader lure, more information is not always better. In the realtime bar, all TV indicators (a.k.a. studies ) execute every time price changes (i.e. every tick ). TV strategies will also behave the same way if they use the calc_on_every_tick = true parameter in their strategy() declaration statement (the parameter’s default value is false ). Pine coders must decide if they want their code to use the realtime price information as it comes in, or wait for the realtime bar to close before using the same OHLC values for that bar that would be used on historical bars. Strategy modelers often assume that using realtime price information as it comes in the realtime bar will always improve their results. This is incorrect. More information does not necessarily improve performance because it almost always entails more noise. The extra information may or may not improve results; one cannot know until the code is run in realtime for enough time to provide data that can be analyzed and from which somewhat reliable conclusions can be derived. In any case, as was stated before, it is critical to understand that if your strategy is taking decisions on realtime tick data, you are NOT running the same strategy you tested on historical bars with OHLC values only. How do we avoid repainting? It comes down to using reliable information and properly configuring alerts, if you use them. Here are the main considerations: 1. If your code is using security() calls, use the syntax we propose to obtain reliable data from higher timeframes. 2. If your script is a strategy, do not use the calc_on_every_tick = true parameter unless your strategy uses previous bar information to calculate. 3. If your script is a study and is using current timeframe information that is compared to values obtained from a higher timeframe, even if you can rely on reliable higher timeframe information because you are correctly using the security() function, you still need to ensure the realtime bar’s information you use (a cross of current close over a higher timeframe MA, for example) is consistent with your backtest methodology, i.e. that your script calculates on the close of the realtime bar. If your system is using alerts, the simplest solution is to configure alerts to trigger Once Per Bar Close . If you are not using alerts, the best solution is to use information from the preceding bar. When using previous bar information, alerts can be configured to trigger Once Per Bar safely. What does this indicator do? It shows results for 9 different ways of using the security() function and illustrates the simplest and most effective way to avoid repainting, i.e. using security() as in the example above. To show the indicator’s lines the most clearly, price on the chart is shown with a black line rather than candlesticks. This indicator also shows how misusing security() produces repainting. All combinations of using a 0 or 1 offset to reference the series used in the security() , as well as all combinations of values for the gaps= and lookahead= parameters are shown. The close in the call labeled “BEST” means that once security has reached the upper timeframe (1 day in our case), it will fetch the previous day’s value. The gaps= parameter is not specified as it is off by default and that is what we need. This ensures that the value returned by security() will not contain na values on any of our chart’s bars. The lookahead security() to use the last available value for the higher timeframe bar we are using (the previous day, in our case). This ensures that security() will return the value at the end of the higher timeframe, even if it has not occurred yet. In our case, this has no negative impact since we are requesting the previous day’s value, with has already closed. The indicator’s Settings/Inputs allow you to set: - The higher timeframe security() calls will use - The source security() calls will use - If you want identifying labels printed on the lines that have no gaps (the lines containing gaps are plotted using very thick lines that appear as horizontal blocks of one bar in length) For the lines to be plotted, you need to be on a smaller timeframe than the one used for the security() calls. Comments in the code explain what’s going on. Look first. Then leap.
Pine Script® göstergesi
PineCoders tarafından
173
Signal for Backtesting-Trading Engine [PineCoders]This is a companion script to the PineCoders Backtesting-Trading Engine. It illustrates how to build a signal plot in another script, which can in turn be fed in the Engine to provide entry, exit, filter and stop information. Connection to the Engine is done through its “External Indicator” input field at the very bottom of the Engine’s Settings/Inputs. The Engine must be operating in study mode to be able to connect an external indicator to it. The way this script builds the signal is straightforward, as you will see in the code. Two aspects are worth mentioning: The “FudgeStop()” function used to fudge the stop value by one tick for the rare cases where it will match one of the protocol reserved values, i.e. 1, 2 or 3. The priority and exclusivity given to the different types of signals in the signal-building “Signal = …” line. No two signals can be sent simultaneously through the signal plot, except for the entry and stop combination. You can determine in this script’s Settings/Inputs the type of signals that will go through the signal plot. This script respects the following protocol: EXTERNAL SIGNAL PROTOCOL Only one external indicator can be connected to a script; in order to leverage its use to the fullest, the engine provides options to use it as either an entry signal, an entry/exit signal or a filter. When used as an entry signal, you can also use the signal to provide the entry’s stop. Here’s how this works: For filter state: supply +1 for bull (long entries allowed), -1 for bear (short entries allowed). For entry signals: supply +2 for long, -2 for short. For exit signals: supply +3 for exit from long, -3 for exit from short. To send an entry stop level with an entry signal: Send positive stop level for long entry (e.g. 103.33 to enter a long with a stop at 103.33), negative stop level for short entry (e.g. -103.33 to enter a short with a stop at 103.33). If you use this feature, your indicator will have to check for exact stop levels of 1.0, 2.0 or 3.0 and their negative counterparts, and fudge them with a tick in order to avoid confusion with other signals in the protocol. Remember that mere generation of the values by your indicator will have no effect until you explicitly allow their use in the appropriate sections of the Engine’s Settings/Inputs. Look first. Then leap.
Pine Script® göstergesi
PineCoders tarafından
14
COT disaggregatedCFTC COT data is exported by quandl.com to tradingview COT@quandl: www.quandl.com COT@tradingview www.tradingview.com How to use this script: Select and load CFTC COT data for the commodity ticker in the chart Will by default take current ticker, or allow to avvverride it with another Traders' categories are those for commodities , not financial futs Select And Configure : -categories to be plotted -Futures/Futures+Options -by num_contracts/percent -plot "Tot Spreads %" selection (only when also "Show as % of OI" selected) will plot the total of spreads positions across all categories This script supercedes my other "MY_ CFTC GC/SI/CL (Disaggregated)" script Just changed name
Pine Script® göstergesi
giancapino tarafından
plot CFTC COT disaggregated dataCFTC COT data is exported by quandl.com to tradingview COT@quandl: www.quandl.com COT@tradingview www.tradingview.com How to use this script: Select and load CFTC COT data for the commodity ticker in the chart Will by default take current ticker, or allow to avvverride it with another Traders' categories are those for commodities, not financial futs Select And Configure : -categories to be plotted -Futures/Futures+Options -by num_contracts/percent -plot"Tot Spreads %" selection when also "Show as % of OI" selected This script supercedes my other "MY_ CFTC GC/SI/CL (Disaggregated)" script
Pine Script® göstergesi
giancapino tarafından
FX Meter ScriptA while ago, we wrote* about the usefulness of using a currency strength meter and how you can build one from scratch. See here: www.globalprime.com.au Now we've taken this little project to the next level by visually spotting, via color signals in a dashboard and alerts, when a potential new trend might be developing in a currency pair. *It's critical that you first read that article before you jump into reading this one or else you could get easily lost. The script gives a trigger every time two currencies show diverging flows via opposing moving average slopes. The signals originate from a first chart where currency indexes can be found, calculated through a formula, in various thin lines. Then a moving average to each currency index is applied so that it can smooth out the lines (what I call Micro moving averages – thicker lines -) and is usually a 4-5 period MA, with the key input to pay attention being the slope. One can perform their own tests on what works best for their particular trading style. The smaller the period in the moving average, the more responsive to changes in biases but the downside is that you will get a greater number of false moves. In the windows below the 1st chart, the stochRSI is calculated for each currency index (these values originate from the currency index and not from the applied MA). By default, a 25-period is applied to both RSI and Stoch length. A 2nd chart that looks at the same logic is also accounted for to build this script, but instead of checking the micro trend, it applies a 25MA to the currency index, so it looks at what I call the slope of the macro trend. In this case, by default, a 125-period is applied to both RSI and Stoch length. We had in mind to transition from just eye-balling and monitoring these charts manually to build a script via Tradingview that makes calculations real time (whenever the change in the moving average slope first occurs, and not when the bar/line closes), so that one can decide whether or not its a signal worth trading as part of a new trend emerging. Note, this is not so much a signal-triggering indicator but rather a tool to constantly be on the lookout monitoring what currencies might start to develop trends. The actual script consists of a dashboard with different colored rectangles being triggered depending on the quality of the signal. We will be happy to discuss it further with anyone who is interested in exploiting all the benefits that it can offer. The way you add the script into your Tradingview chart is by first copy everything in the txt file. Then go to Pine editor (bottom middle-left) in your tradingview chart, delete everything there, then Paste the script. Then click Add to Chart (top right of the pine editor). Note, you should add via the Anchored Text function the following list of pairs below, in this alphabetic order, on the right-hand side of the chart, as demonstrated above: AUDCAD AUDJPY AUDNZD AUDUSD CADJPY EURAUD EURJPY EURCAD EURNZD EURGBP EURUSD GBPAUD GBPCAD GBPJPY GBPNZD GBPUSD NZDCAD NZDJPY NZDUSD USDCAD USDJPY There are only 2 rules for the script to trigger a signal (see below). However, as I will elaborate further down, there are up to 6 different colors we can grade a signal RULE 1 -> 2 moving averages, which are a calculation applied to a currency index as shown in the micro trend above, exhibit slopes in the opposite direction. RULE 2 -> The Stoch RSI cannot be in overbought conditions if the slope of the moving average points higher or in oversold if the slope points lower. Note 1: Even if the chart is a 60m timeframe by default (can be changed to any timeframe(, one gets the signal the moment the change of slope is identified, which means the indicator monitors changes in price tick by tick, and not on a candle close, otherwise one would get the trigger too late. As an example of the highest-graded signal triggering (in green), a few hours ago we were given the visual cue that GBPCAD was experiencing a change of behavior. If we crosscheck the time the green-colored trigger was given with the actual GBPCAD chart, this is what we can observe. The pair is 30p higher since the trigger. HOW TO SETUP ALERTS One can easily setup a notification window each time the above rules are met, for example, if the EUR MA slope changes to bullish, and the AUD MA slope changes to bearish, and none of the 2 currency index values corresponding to these 2 moving averages (EUR and AUD) show a stoch RSI in overbought (above 80) in the case of the EUR, or oversold (below 20) in the case of the AUD, then the notification pop up would show a customized line: Long EURAUD Note 1: Recording the slope of the macro moving average, which is usually a 25period MA applied to the currency index, is not included as part of the rules to trigger a signal, but it is taken into account to grade the quality of each signal. Note 2: I recommend each signal to be triggered once or if you prefer, simply monitor the chart visually on the change of colors via the dashboard. The calculation resets and can appear again the moment that the slope changes to the opposite direction, so it’s a very dynamic indicator that will alert you the second a pair of currencies starts trending. Note 3: When the signal is triggered, the indicator draws a colored rectangle. Each signal notification should be colored based on the following logic below. LOGIC TO QUALIFY SIGNALS -> Any long micro position with Macro MA in full agreement (ie/ Long EURAUD, Macro EUR up, Macro AUD down) is highlighted with green color -> Any long micro position with macro moving averages in partial agreement (for example Long EURAUD, Macro EUR up AUD up) is highlighted with blue color -> Any long micro position with macro moving averages in full disagreement (for example Long EURAUD, Macro EUR down AUD up) is highlighted with magenta color -> Any short micro position with macro moving averages in full agreement (for example Short EURAUD, Macro EUR down AUD up) is highlighted with red color -> Any short micro position with macro moving averages in partial agreement (for example Short EURAUD, Macro EUR up AUD up) is highlighted with orange color -> Any short micro position with macro moving averages in full disagreement (for example Short EURAUD, Macro EUR up AUD down) is highlighted with purple color PARAMETERS IN THE SCRIPT SETTINGS Overbought/oversold: One can modify the stoch RSI level from which the indicator considers the value to be in overbought or oversold conditions. As a rule of thumb, consider 20/30 for oversold and 70/80 for oversold. Slopes micro/macro MAs: One can edit the slope of the micro MA period (rule of thumb 4-5) and the macro MA (by default 25). Value StochRSI: The default inputs are K 3, D 3, RSI Length 25, Stoch Length 25 for the micro and 125 period for the macro. Change colors: One can edit the assigned colors in the signals dashboard. Timeframe applied: The indicator has the flexibility to be applied to any timeframe, not just the 60m by default. Simply change the timeframe temporality. CURRENCY INDEXES FORMULAS It is the responsibility of the user to keep the values of the indexes updated. Find a recent sample below, as per values in early April. What this means is that at least once a week, in order to not let the values outdated, you should update the script with the latest valuations in the denominator. NZD INDEX -> FX_IDC:NZDAUD/0.96+FX:NZDJPY/75.81+FX:NZDUSD/0.68+FX_IDC:NZDEUR/0.6+FX_IDC:NZDGBP/0.52+FX:NZDCHF/0.69+FX:NZDCAD/0.9 EUR INDEX -> FX:EURUSD/1.13+FX:EURJPY/125.5+FX:EURGBP/0.87+FX:EURCHF/1.135+FX:EURCAD/1.49+FX:EURNZD/1.655+FX:EURAUD/1.59 JPY INDEX -> 1/(FX:USDJPY/110.5+FX:EURJPY/125.5+FX:AUDJPY/79+FX:NZDJPY/75.5+FX:GBPJPY/144.5+FX:CHFJPY/110.5+FX:CADJPY/84) USD INDEX -> FX_IDC:USDEUR/0.88+FX:USDJPY/110.5+FX_IDC:USDGBP/0.77+FX:USDCHF+FX:USDCAD/1.315+FX_IDC:USDNZD/1.46+FX_IDC:USDAUD/1.4 CAD INDEX-> FX_IDC:CADAUD/1.07+FX_IDC:CADNZD/1.11+FX:CADJPY/84.27+FX_IDC:CADUSD/0.76+FX_IDC:CADEUR/0.67+FX:CADCHF/0.76+FX_IDC:CADGBP/0.58 GBP INDEX -> FX:GBPAUD/1.83+FX:GBPNZD/1.91+FX:GBPJPY/144.5+FX_IDC:GBPEUR/1.15+FX:GBPCHF/1.31+FX:GBPUSD/1.31+FX:GBPCAD/1.71 Remember, I have provided a manual on how to build a currency strength meter. That’s what you will need to do first if you want to obtain the actual currency indexes other than just the indicator, which is just the visual cue to get you alerted when the slopes turn. Once you’ve created your indexes via tradingview, you then apply a moving average to each index. Then apply the stochrsi 25 period to each index. For the macro trend, I make the same calculations, but the period of the MA is 25 instead of 4, while the stoch rsi is 125 periods vs 25 periods. FINAL NOTE This is a tool that should be interpreted as visual assistance, via the dashboard, to get that first cue when opposing micro slopes via the FX meter occur. However, you still need to check the technical context of the pair (levels marked, proj reached, etc.) but that first cue is a major time saver to constantly spot what's trending in FX. The permutations u can play with, as part of this script, are significant. You can tweak the timeframes you use, the periods of the moving averages, etc. I find the micro and macro trend combos when either a green or red signals is triggered the most reliable, with positions to be exploited via 15m and hourly under the right technical context.
Pine Script® göstergesi
FlowState tarafından
3
Monster Cumulative Delta OpenAfter a few requests, the MonsterDelta is is now available with open source. As mentioned before, it uses an approximation of Up and Down Volume (because they are not kept by Tradingview/not accessible by Pinescript). The approximation is: The "up path" on the "up" candle can be approximated by (High-Low). The "down path" on the "up" candle can be approximated by (High-Close)+(Open-Low). (and similar for the down candle, like in the 1st post.) Total path=up path + down path. Up volume = Tick volume * up path/total path Down volume = Tick volume * down path/total path Cheers, kprsa
Pine Script® göstergesi
kprsa tarafından
6
Weekly/Monthly CloseJust a simple support/resistance indicator that display weekly/monthly close price and it is configurable to work in two modes: tracking mode - to display last week/month's close history mode - to display weekly/monthly close prices See how last month's close (ticker blue line) provides nice resistance and the price forms a double top then it consolidates under last week's close line (thiner blue line). It also works on intraday charts and displays history close prices, see below how last month's close (ticker blue line) provides support over and over and also how price bounces off weekly close history prices (thiner blue line).
Pine Script® göstergesi
icostan tarafından
5