Şimdi başlat

Komut dosyalarını "trend" için ara

ATR Based Trendlines - JDThis script draws trendlines from the pivot points in the price chart. The angle of the trendlines is determined by (a percentage of) the atr. The angle follows the change in price, dictated by the atr at the moment where the pivot point is detected. The atr percentage determines if the trendline follows the rate of change of the atr or a fraction ( value < 100) or a multiple ( value > 100) of that JD. #NotTradingAdvice #DYOR Disclaimer. I AM NOT A FINANCIAL ADVISOR. THESE IDEAS ARE NOT ADVICE AND ARE FOR EDUCATION PURPOSES ONLY. ALWAYS DO YOUR OWN RESEARCH!
Pine Script® göstergesi
Duyck tarafından
17
Linear Regression Trend Channel with Entries & AlertsPlease Use this Indicator If you understand the risk posed by linear regression trend channel Features Provides trend channel (best value for period is 40 on 5 minute timeframe Provides BUY/SELL entries based on current channel Provides custom color for channel Best used with MattyPips strategy indicators Risks : Please note, this script is the likes of Bollinger bands and poses a risk of falling in a trend range. Entries may keep running on the same direction while the market is moving.
Pine Script® göstergesi
MrTuanDoan tarafından
23
Grand Trend Forecasting - A Simple And Original Approach Today we'll link time series forecasting with signal processing in order to provide an original and funny trend forecasting method, the post share lot of information, if you just want to see how to use the indicator then go to the section "Using The Indicator". Time series forecasting is an area dealing with the prediction of future values of a series by using a specific model, the model is the main tool that is used for forecasting, and is often an expression based on a set of predictor terms and parameters, for example the linear regression (model) is a 1st order polynomial (expression) using 2 parameters and a predictor variable ax + b . Today we won't be using the linear regression nor the LSMA. In time series analysis we can describe the time series with a model, in the case of the closing price a simple model could be as follows : Price = Trend + Cycles + Noise The variables of the model are the components, such model is additive since we add the component with each others, we should be familiar with each components of the model, the trend represent a simple long term variation of high amplitude, the cycles are periodic fluctuations centered around 0 of varying period and amplitude, the noise component represent shorter term irregular variations with mean 0. As a trader we are mostly interested by the cycles and the trend, altho the cycles are relatively more technical to trade and can constitute parasitic fluctuations (think about retracements in a trend affecting your trend indicator, causing potential false signals). If you are curious, in signal processing combining components has a specific name, "synthesis" , here we are dealing with additive synthesis, other type of synthesis are more specific to audio processing and are relatively more complex, but could be used in technical analysis. So what to do with our components ? If we want to trade the trend, we should estimate right ? Estimating the trend component involve removing the cycle and noise component from the price, if you have read stuff about filters you should know where i'am going, yep, we should use filters, in the case of keeping the trend we can use a simple moving average of relatively high period, and here we go. However the lag problem, which is recurrent, come back again, we end up with information easier to interpret (here the trend, which is a simple fluctuation such as a line or other smooth curve) at the cost of decision timing, that is unfortunate but as i said the information, here the moving average output, is relatively simple, and could be easily forecasted right ? If you plot a moving average of high period it would be easier for you to forecast its future values. And thats what we aim to do today, provide an estimate of the trend that should be easy to forecast, and should fit to the price relatively well in order to produce forecast that could determine the position of future closing prices observations. Estimating And Forecasting The Trend The parameter of the indicator dealing with the estimation of the trend is length , with higher values of length attenuating the cycle and noise component in the price, note however that high values of length can return a really long term trend unlike a simple moving average, so a small value of length, 14 for example can still produce relatively correct estimate of trend. here length = 14. The rough estimate of the trend is t in the code, and is an IIR filter, that is, it is based on recursion. Now i'll pass on the filter design explanation but in short, weights are constants, with higher weights allocated to the previous length values of the filter, you can see on the code that the first part of t is similar to an exponential moving average with : t(n) = 0.9t(n-length) + 0.1*Price However while the EMA only use the precedent value for the recursion, here we use the precedent length value, this would just output a noisy and really slow output, therefore in order to create a better fit we add : 0.9*(t(n-length) - t(n-2length)) , and this create the rough trend estimate that you can see in blue. On the parameters, 0.9 is used since it gives the best estimate in my opinion, higher values would create more periodic output and lower values would just create a rougher output. The blue line still contain a residual of the cycle/noise component, this is why it is smoothed with a simple moving average of period length. If you are curious, a filter estimating the trend but still containing noisy fluctuations is called "Notch" filter, such filter would depending on the cutoff remove/attenuate mid term cyclic fluctuations while preserving the trend and the noise, its the opposite of a bandpass filter. In order to forecast values, we simply sum our trend estimate with the trend estimate change with period equal to the forecasting horizon period, this is a really really simple forecasting method, but it can produce decent results, it can also allows the forecast to start from the last point of the trend estimate. Using The Indicator We explained the length parameter in the precedent section, src is the input series which the trend is estimated, forecast determine the forecasting horizon, recommend values for forecast should be equal to length, length/2 or length*2, altho i strongly recommend length. here length and forecast are both equal to 14 . The corrective parameter affect the trend estimate, it reduce the overshoot and can led to a curve that might fit better to the price. The indicator with the non corrective version above, and the corrective one below. The source parameter determine the source of the forecast, when "Noisy" is selected the source is the blue line, and produce a noisy forecast, when "Smooth" is selected the source is the moving average of t , this create a smoother forecast. The width interval control...the width of the intervals, they can be seen above and under the forecast plot, they are constructed by adding/subtracting the forecast with the forecast moving average absolute error with respect to the price. Prediction intervals are often associated with a probability (determining the probability of future values being between the interval) here we can't determine such probability with accuracy, this require (i think) an analysis of the forecasting distribution as well as assumptions on the distribution of the forecasting error. Finally it is possible to see historical forecasts, that is, forecasts previously generated by checking the "Show Historical Forecasts" option. Examples Good forecasts mostly occur when the price is close to the trend estimate, this include the following highlighted periods on AMD 15TF with default settings : We can see the same thing at the end of EURUSD : However we can't always obtain suitable fits, here it is isn't sufficient on BTCUSD : We can see wide intervals, we could change length or use the corrective option to get better results, another option is to use a log scale. We will end the examples with the log SPX, who posses a linear trend, so for example a linear model such as a linear regression would be really adapted, lets see how the indicator perform : Not a great fit, we could try to use an higher length value and use "Smooth" : Most recent fits are quite decent. Conclusions A forecasting indicator has been presented in this post. The indicator use an original approach toward estimating the trend component in the closing price. Of course i should have given statistics related to the forecasting error, however such analysis is worth doing with better methods and in more advanced environment allowing for optimization. But we have learned some stuff related to signal processing as well as time series analysis, seeing a time series as the sum of various components is really helpful when it comes to make sense of chaotic and noisy series and is a basic topic in time series analysis. You can see that in this new year i work harder on the visual of my indicators without trying to fall in the label addict trap, something that i wasn't really doing before, let me know what do you think of it. Thanks for reading !
Pine Script® göstergesi
alexgrover tarafından
25
Efficient Trend Step ChannelIntroduction The efficient trend-step indicator is a trend indicator that make use of the efficiency ratio in order to adapt to the market trend strength, this indicator originally aimed to remain static during ranging states while fitting the price only when large variations occur. The trend step indicator family unlike most moving averages has a boxy appearance and could therefore not be classified as smooth, this makes it an indicator relatively uninteresting to use as input for other non-trending indicators such as oscillators. Today a channel indicator making use of the efficient trend-step is proposed, the indicator has an upper and a lower extremity who can be used for breakout or support and resistance methodologies, however we will see that the indicator is sometimes able to return accurate support and resistance levels. The Indicator The indicator has the same settings has the efficient trend step indicator, length control the period of the efficiency ratio, fast control the period of the rolling standard deviation used for trending states, slow control the period of the rolling standard deviation used for ranging states, fast should be lower than slow , if both are equal then the indicator is equal to the classical trend step indicator and length does no longer affect the indicator output. Lower values of fast/slow will make the indicator more reactive to small variations thus changing direction more often. The color changes you can see on the indicator are changed depending on the prior direction took by the indicator output, if the indicator where higher than its precedent value, then the color will be blue until the indicator is lower than its precedent value. Those colors help you have an estimate of the current trend direction. Channel Calculation And Role The extremities made from the efficient trend step allow for more advanced trading rules, they can act as stop/target level and can also give a rough estimate of the current market volatility, with wider extremities indicating a more volatile market. The extremities are made directly from the dev element used by the efficient trend-step, the upper extremity is made by summing the efficient trend step with the value of dev when the efficient trend step change, the lower extremity is made the same way but the value is subtracted instead. Is it a weird choice ? It sure is strange to see such approach, the absolute rolling average error between the price and the efficient trend step could have been a logical measure but using dev instead is more efficient and also allow for a more adaptive approach which can benefit the support and resistance methodology, the last reason is because i didn't wanted to "denature" the trend-step signature of the indicator. The figure above represent the measurement used for making the extremities (in green). Since the previously described measure change only when the efficient trend step change, we can conclude that such measure is representative of a relatively large variation, since the efficient trend step aim to only change when a large variations appear. We can see that the upper extremity acted as an accurate resistance in this upper variation of AMD, Here as well, however like other bands indicators it is safer to take into account the current trend direction, a strong uptrend will have less difficulties crossing the upper extremity, therefore it might be better to rely on the support (lower extremity) on an up-trending market (indicator in blue), and on the resistance (upper extremity) on an down-trending market (indicator in orange). The figure above show support and resistances signals, a cross represent a false signal, while green arrows represent correct ones with their respective direction. Conclusion The presented indicator add more possibilities to the interpretation of the efficient trend step, the extremities can act as stop/target level, however this use has to be controlled, and the level should be in accordance to your risk/reward ratio. Showcasing another trend-step indicator was a real pleasure. Thanks for reading :)
Pine Script® göstergesi
alexgrover tarafından
5
HMA-Kahlman Trend, DifferenceFilter & TrendlinesThis update to the previous HMA-Kahlman Trend, Clipping & Trendlines script features the same structure with the three modules: - Trendlines module, - NEW Winsorizing submodule using difference-based filtering. - HMA-Kahlman Trend module. The Winsorizing submodule filters signals by a volume level, eliminating the ones with the volume below a threshold. This module substitutes the previous 'low-level' filtering implementation. This time it filters out based on difference between scaled volume and its moving average. Tested with BTCUSD.
Pine Script® göstergesi
capissimo tarafından
15
Trend Direction Helper (ZigZag and S/R and HH/LL labels)Hey everyone First of all, I'd like to thank Ricardo Santos, Backtest Rookies for the inspiration for this script. Actually, most of it is coming from them and I only mixed them up (and added my secret sauce ^^). If some of you are not thinking about a trading secret sauce, please get serious for a moment :) Some of you asked me how I do to set the trend direction. You all understood that if you get an UP label, then the price should go up and vice-versa for down. But it's not so easy to define the good signals for each asset and each timeframe. I'm going to repeat what I said yesterday because ... well... that's what trading is about So quoting myself here "The inputs set by default will have to be changed for your asset/timeframe and can't be generic for everything. You have to play with the inputs until the signals will make sense to you The indicator/strategy with a unique configuration that you'll never check or update according to the market condition DOES NOT exit. " BUT... a bit of patience and practice and you might do wonders. The Method I never realized until now but by connecting the higher highs/lower lows, I was drawing zigzag lines. The Zig Zag Master is Ricardo Santos . Please give him a follow, he's awesome For those who don't want to draw on the chart or (my preferred choice) need some inspiration to define your trend directions, this script is for YOU (and your family, your pet, your girlfriend/boyfriend, ...) I think that each asset/timeframe chart has its own history. What worked in a post could work in the future. In that regard, if a trend direction worked in the past, that's the parameter that I'll use to trade with it in a demo account and make sure it's relevant. If not then I will adjust If you're trading with new indicators or a new method right away on your real trading account, you're gonna have a bad time imgflip.com Lines EVERYWHERE The script draws the classical horizontal pivots + the zig zag lines + the Higher Highs/Lower Lows label in just 1 script. I'm very excited to share a script (on which I coded 100 lines out of 500) but no one else did it The horizontal pivots part are coming from Backtest Rookies For more security, you can add a pullback on a moving average after getting a signal. Pullbacks are necessary to limit any eventual loss or maximize your gains by getting in the trend sooner. I really give you a solid method and a great script in my opinion. 6 years of experience given away for FREE :p (when Dave will start thinking as a business man instead :O) Does it repaint ? Getting this question twice a day. You guys are obsessed with the repainting :) Short answer, yes because it will calculate the pivots and zig zags whenever new higher highs/lower lows will be formed. However, the trend direction code is based on the candle close so it shouldn't repaint. If it does, please let me know See you all on Monday Love you all Dave ____________________________________________________________ Be sure to hit the thumbs up. Building those indicators take a lot of time and likes are always rewarding for me :) (tips are accepted too) - If you want to suggest some indicators that I can develop and share with the community, please use my personal TRELLO board - I'm an officially approved PineEditor/LUA/MT4 approved mentor on codementor. You can request a coaching with me if you want and I'll teach you how to build kick-ass indicators and strategies Jump on a 1 to 1 coaching with me - You can also hire for a custom dev of your indicator/strategy/bot/chrome extension/python Disclaimer: Trading involves a high level of financial risk, and may not be appropriate because you may experience losses greater than your deposit. Leverage can be against you. Do not trade with capital that you can not afford to lose. You must be aware and have a complete understanding of all the risks associated with the market and trading. We can not be held responsible for any loss you incur. Trading also involves risks of gambling addiction. Please notice I do not provide financial advice - my indicators, strategies, educational ideas are intended to provide only some source code for anyone interested in improving their trading The proprietary indicators and strategies developed by Best Trading Indicator, the object of intellectual property rights are and remain the exclusive property of Best Trading Indicator, at the exclusion of images and videos and texts free of rights or provided by the Company or external legal or physical person. No assignment of intellectual property rights is carried out through these Terms and Conditions. Any total or partial reproduction, modification or use of these properties for any reason whatsoever is strictly prohibited without the express written authorization of the Company.
Pine Script® göstergesi
Daveatt tarafından
93
Trend Scores + Volume-Weighted Trend ScoresHere is a simple indicator based on Tushar Chande's TrendScore . The main purpose of the TrendScore is to determine the strength and direction of a trend, which it does by comparing the current price to the prices within a user-defined window of historical prices. In the input menu, the user defines the starting and ending period. The current price is then compared to each historical price. If the current price is greater than the given historical price, then the TrendScore is incremented, while it is decremented if it is below the given historical price. TrendScore values fluctuate between a maximum of 100 and a minimum of -100, with 100 meaning that the current price is greater than each historical price in the window and a value of -100 meaning the inverse is true. We then use the same process to calculate the volume trend score by passing in volume to the 'getTrendScore' function. Lastly, the indicator also also calculates a 'volume-weighted trend score'. This is simply the average of the price trend score and the volume trend score. It is not plotted by default, but users can set the input option to true in the input menu and it will be plotted as a yellow line (as seen in the bottom chart). The Chart: The trend scores for price are plotted as a histogram. We've summarized the meaning behind its color changes below: -If ( trendScore == 100) then color = dark green -if ( trendScore < 100 and trendScore is increasing) then color = light green -if ( trendScore > 0 and trendScore is DECREASING) then color = pink -if ( trendScore < 0) then color = red The volume trend score is plotted as a blue line. We felt that using a similar coloring system for the volume trend scores would over-crowd the chart and take away from the simplicity that makes this indicator useful. The volume-weighted trend score is plotted as a yellow line. The main price bars change color based on the price trend score to make the values easier to visualize as well. Interpretation: This is a pretty versatile indicator. We summarized the ways in which traders can use it: -Enter Long Positions when the trend score crosses zero from negative to positive territory. -Exit Long Positions when the trend score was previously 100 and begins decreasing (ie bar color changes from dark green to pink). -Spot bearish divergences when price trend score is 100 or relatively high and the volume trend score decreases significantly. -Identify bullish divergences when price trend score is relatively low and volume trend score is increasing. ~Happy Trading~
Pine Script® göstergesi
ProfitProgrammers tarafından
5
Modular Filter - Spot Trends And Smooth PriceIntroduction This indicator can have a wide variety of usages, and since it is based on exponential averaging then the whole indicator can be made adaptive, thus ending up with a really promising tool. This indicator who can both smooth price and act as a trailing stop depending on user preferences, i tried to make it as reactive, stable and efficient as possible in order to both smooth and spot trends, lets view it more in depth. The Indicator line 8 and 9 create two bands, one upper and one lower, then based on certain conditions the indicator will only return a certain band or an average of both with different weights, this weight is controlled by the beta parameter, values of 1 will return a simple filter while values of 0 will return a classical trailing stop. beta = 0 The indicator can use output values as input, thus using smoother values as input, in order to do so just check "Feedback", this help the overall output to be smoother as well as giving more long terms signals The amount of feedback is controlled by the feedback weighting parameter, lower values will weight more the output values thus creating smoother results. Feedback weighting of 0.2 Using beta = 0 thus having the indicator act as a trailing stop while having the feedback option activated return more long terms signals. Notes that the colors are based on the initial conditions of the indicator. Conclusion You can replace length and change alpha for any smoothing variable such as the efficiency ratio or anything with scale (1,0), same goes for beta and the feedback weighting parameter, this is why the indicator is "Modular" in addition of providing different usages. This indicator can look like cluster filters (smooth price monarch, forexguru) , filters with the ability to follow the price quite fine while being stables. I really hope you find an use to it. Thanks for reading !
Pine Script® göstergesi
alexgrover tarafından
32
Trend Direction Force Index - TDFI [wm]TDFI can range from -1 to 1 and thus indicate the direction of the trend. In periods of consolidation ratios take very low values ​​close to zero as a rule, do not exceed the value of 0.05 (and -0.05), which have set arbitrarily as horizontal signal lines. Rate accelerates rapidly to higher values ​​when the consolidation ends and is a good chance of becoming a permanent trend. As an extension, the trader can assume that as long as the pointer moves above the signal line and does not come down to the low value of less than 0.05 for at least two bars the trend continues. So the descent below signal line and a return to higher values ​​should be interpreted as a temporary weakening trend. Not before rate remains below 0.05 for at least 2 bars, can we consider that the market is likely to begin to consolidate In addition, we can assess the strength of the trend, depending on the value of the index – the index reaches 1 trend is strong (-1 is a strong downward trend) and generally values ​​above 0.6 should be so interpreted. Less than in decline should be considered that the trend is losing its momentum.
Pine Script® göstergesi
causecelebre tarafından
15
Trend Mesh (TM) for FX by Tirano안녕하세요. 다이너스티 팀의 안드레아 입니다. 기존에 티라노라는 이름으로 활동했습니다 Trend Mesh ( TM ) 소개 본 지표를 보는 방법은 단순합니다. 굵은 선이 파란색이면 상승추세이고, 붉은색이면 하락추세 입니다. 큰 타임 프레임에서 상승 추세라면, 조정시에 매수포지션을 취하는것이 유리하고 반대로 하락 추세라면 상승시에 매도포지션을 취하는것이 유리합니다. 기타 문의사항은 댓글 남겨주시면 감사하겠습니다. Hi. this is Andreas of ​​the Dynasty team. Introduction to Trend Mesh ( TM ) Viewing this indicator is simple. If the bold line is blue, it is an upward trend, while a red line is a downward trend. If the upward trend is in a large time frame, it is advantageous to take the buy position at the time of adjustment, and if it is a downward trend, it is advantageous to take the selling position at the time of rise. If you have any other questions, please leave a comment.
Pine Script® göstergesi
XABCD_TIRANO tarafından
1
Trend is your friendThis indicator evaluates the trend based on crosses of two McGinley moving averages. It paints candles accordingly (it does not repaint), so you can see what the indicator is saying more clearly and stay in your trade until you see a period of consolidation or a reversal. You can control how far away those moving averages need to be for you to consider it a trend. If this distance is not met candles color is not changed and it shows you that the market is in a period of consolidation. I also added visualization of RSI, so you can have an easier time finding appropriate profit targets. For stop loss I would recommend placing it a couple points above or below the previous high / low that is located above / below you final target for entry. You can also use a certain percentage that works for you. I tried adding a stop loss based on ATR, but I did not like the results. Using market structure is a better choice in my opinion. Here is a basic trading strategy for the default settings: Wait for the indicator to start printing a series of green or red candles. After that you can enter a long or a short around moving averages. Another valid place to entry is the specific RSI zone. If we are in an uptrend buying when RSI is oversold can be beneficial as you expect market to recover. I do not recommend changing RSI from 14. Vice versa for the downtrend. It gives you an edge as you know at what price RSI will be oversold and allows you to place trades in advance. Pretty neat! You need to realize that no indicator or strategy can give you an exact entry. There will always be some margin of error. What I wanted to say is that if there is a strong trend up and you buy around your key moving averages and when RSI is oversold you entered in good places and there is a pretty good chance you will make money. Time frame settings: If you want to use tighter stop losses I would recommend sticking to 15m. Do not go lower. It is not worth the stress. 1h and 4h seems to be very good as well, but expect your stop losses to be wider. What I personally tend to do is display 15m, 30m and 1h and compare it. Think of it as a short, mid and long term. That way you can see things little bit better. Examples: 1H chart BTC 4h chart EUR / USD 1D chart NASDAQ 15m chart BTC (Daytrading) That last chart shows that even if you were longing while the trend was about to change you still had a good chance to close it with a little profit and switch to short easily. The default settings is what has worked the best for me. Feel free to change them as you see fit and do not forget to let me know if you find something that works better :) Notes: Either disable wick display or change it to a neutral color like gray for both green and red candles. Unfortunately pine script does not allow wick painting, so if you have red / green wicks it will look terrible. If RSI visualization makes your candles look too small you can go to settings and disable the display of individual RSI levels. You will still be able to see the zones, but the scale won't be affected.
Pine Script® göstergesi
Jigga_StRiKeR tarafından
7
Reversal Candlestick Pattern With Trend IndentifierThis script help to identified popular candlestick pattern combined with trend identifier. Most script only focus on criteria of the pattern. Such as how much the length of the body compared to previous candle etc. Besides criteria of the candle, this script also considered the trend into the logic. For example bullish engulfing is a bullish reversal signal, which is only valid in a down trend. To identified trend, I'm using RSI. Normally, RSI less than 50 is considered a down trend, and RSI greater than 50 is considered up trend. In this script, you can customize the criteria of how much RSI is up trend and down trend. Default value RSI >= 55 is up trend, RSI <= 45 is down trend. Your feedback and suggestion is welcome. Supported pattern: White Marubozu (wm) Black Marubozu (bm) Hammer (h) Hanging Man (hm) Inverted Hammer (ih) Shooting Star (ss) Bullish Engulfing (e) Bearish Engulfing (e) Tweezer Bottom (tb) Tweezer Top (tt) Three White Soldiers (tws) Three Black Crows (tbc) Morning Star (ms) Evening Star (es) Three Inside Up (tiu) Three Inside Down (tid) Reference: babypips.com
Pine Script® göstergesi
flintlockwood tarafından
8
Alpha Trend Strength Pro🔥 What You’ll See on the Chart ✅ A floating label appears near the most recent candle. ✅ Label shows: 🔥 Trend direction: Uptrend / Downtrend / Neutral / Near VWAP 💪 Trend strength: Strong / Moderate / Weak / Range 📈 EMA alignment 🎯 RSI momentum state 💥 MACD crossover 📊 Volatility condition (Expanding / Contracting) 🔵 VWAP proximity if enabled ✅ The chart background turns: Green for Uptrend Red for Downtrend Neutral/Gray if in range (no background color) ⚙️ Customize Settings Click the gear icon ⚙️ next to the script’s name on your chart. Change things like: Show/hide background color Toggle VWAP-based filtering Adjust RSI, MACD, Bollinger parameters
Pine Script® göstergesi
Josh-PT tarafından