Şimdi başlat

Komut dosyalarını "entry" için ara

M-RSI Entry Signal + Trend Signalthis function is the mixture of Multi RSI which is produced by Mr.sixamon with MA used for some conditions. based on three different types of RSI, entry signal(diamond shape plot) and trend signal(background color) are created. in addition to RSI, i apply MA and open/close price to decide visible/invisible above signal. this one is much better than previous signals, but still needed to upgrade for higher accuracy. THANKS!
Pine Script® göstergesi
dicekkk tarafından
2
Order Size (Units) and Entry/Stop PricesThis is a risk management script derived from the Turtle trading system. I will define what is needed for each input and will also include a brief description about the intended implementation of the risk management strategy. The risk strategy can be used with any trading strategy. This script displays the order size as a unit. 1 unit is the intended size of an entry, first or adds. If trading contracts, Unit Value is presented in terms of number of contracts. If NOT, Unit Value is presented in terms of total cost for a unit in the currency of the market being traded. ::Inputs:: "Available Capital:" - This number should be the TOTAL amount of capital for use in trading account. DO NOT adjust for leverage. The default available capital is set at 15000. "Account Currency:" - This should be the currency type for the amount entered into "Available Capital:". "Does Account Currency Need To Be Converted?" - The currency type of "Available Capital:" must match the currency type of the market being traded. If the value of capital is not known for the market currency type, this option will perform the necessary calculation. "Exchange used to derive BTC value" - This option is used to determine the exchange rate for currency conversions. "Market Being Traded:" - This option reflects the trading pair of the asset being traded. "Trading with leverage?" - This option will allow a user-specified constant value (i.e. leverage factor) to be used for calculating the account balance and number of units (i.e. order size). This is option is set to "No Leverage" by default, which will only allow the specified available capital to be used for balance and unit calculations. "Amount of Leverage? (1-100)" - This number is the leverage factor being applied to the account per trade (e.g. 2.5, 5, 25, 50, 100). The default leverage factor is 100. "Trading Contracts?" - This option will allow a user-specified value, for contracts, to be used when calculating unit value per order. This option is intended to be used when trading a derivative product (e.g. a contract.) "Cost Per Contract" - This number should be equal to the value of the derivative, quoted in dollars. (e.g. Bitmex contracts are valued at $1, so the cost per contract = 1. Deribit offers contracts valued at $10, so the cost per contract =10.) "Risk Percent" - This number should be the percent of capital you are willing to risk for each trade. (e.g. A $10,000 trading account using 2% risk would risk LOSING $20 on a trade.) Increasing or decreasing the risk amount will adjust stops and adds. This strategy would normally consider the total account equity when calculating the size of every new position. Currently, this indicator only calculates on the amount entered into the "Available Capital:" field. I plan to address this factor before implementing the script into the final complete trading strategy script. The default risk percent is set at 2. Please remember, this indicator is technically in a testing phase. It makes up only a small piece of what will be a much more involved script. ***I am having some trouble with getting correct calculations when trading "BTC Market". I have yet to determine if the issue is due to the TradingView feeds or if the issue is in the actual code. I have, so far, calculated differences of 15-30% when comparing an asset value between it's trading pairs. I am always open to ideas and suggestions.***
Pine Script® göstergesi
aFastHero tarafından
3
LongSetups with Entry Signals and Trailing Stop(HA)High probable Long Setups for any time frame and asset. 75+ win rate Trailing stop always used as exit point To trade only with the trand - enable MAs in the Inputs tab x - means Entry signal is active and waiting for long validation B - on a closed bar is entry signal for long C - on a developing bar is exit long signal Green line - long validation line. must close above to go long Pink line - trailing stop On Long Entry alert - use Once Per Bar Close option. On Long Exit alert (Trailing stop triggered) - use Once Per Bar option to trigger sooner and protect your capital. Always do your own analysis and make trades on your own risk. Find a confluence point where everything aligns and make your own decision. Don't enter a trade because the indicator tells you so. You are free to make a copy of the script and change it to your own needs for your own personal use.
Pine Script® göstergesi
emkill2005 tarafından
1
RSI/MFI - MTF - Entry signals/Trend colored bars - JD@version=2 This indicator is designed to give early entry signals as well as to follow trend moves, according to different settings. The indicator shows a histogram of the RSI ro MFI in relation to an ema of the RSI or MFI. The histogram is then smoothed to give early reversal/entry signals. The actual RSI/MFI line with oversold/overbought indication can be displayed or omitted, as preferred. in addition to the RSI/MFI line or as an alternative to it, the background colour can be set to change folowing the RSI/MFI signals. The timeframe can be chosen. Higher timeframes (eg. 3h) tend to give less false signals. version 5. added support for custom Multiple Time Frame selection. added option for choice of RSI or MFI as base indicator. added option for price bar coloring according to the indicator. (deselecting "borders" in the "style" tab is recommended) price bar coloring can be adjusted for different strategies: 1. following the slope of the histogram (for faster entry/exit signals) 2. according to positive or negative histogram (for longer moves) 3. according to pos. or neg. RSI/MFI (for longer term trend holds) 4. uptrend: biased towards faster buy signals and slower sell signals to stay in the uptrend 5. downtrend: biased towards faster sell signals and slower buy signals to stay in the downtrend A longer timeframe (eg. 3x) is recommended for following trend moves. try different strategies to see what works better for RSI or MFI. JD.
Pine Script® göstergesi
Duyck tarafından
54
RSI-MTF-Histo-EntryThis indicator gives a histogram of RSI in relation to an ema of the RSI. The histogram is then smoothed to reduce false signals. The actualiteit RSI line with overbought/overvols signals can be added or omitted as preferred. The background can be color coded if the RSI is above or below 50. Version 2. Added support for MTF. Longer timesframes (1h-3h) tend to give better entry results. As an example the indicator was added two times, one for the current timeframe and one for a longer timeframe.
Pine Script® göstergesi
Duyck tarafından
6
Fibonacci Retracement (S)-Silver The Automatic Fib Retracement - Silver -0.24% script indicates the 50-61.8% pullback region. The lines of the upper and lower pivots, the support and resistance areas are also highlighted. Customisable Fib Length - Time period over which max and min pivots are chosen. Offsetfib - Automatically offsets the pivots and sell zone as your entry position will be some time after the upper and lower pivots are set. Works well when used in combination with an oscillator which highlights Divergence. A strategy based off buying the 50-618 with a defined stop loss and target can be the basis of your strategy. This tool will automatically plot those points but a defined Risk Management strategy will always be needed. Works best in Bearish trends but will work on all timeframes (Bearish correction in an uptrend also possible). Previous pivots shown but be careful to identify which of the several pivots you are using. Start at a larger timeframe and move down. (Entries consistent on several timeframes are golden) Pivots and retracements are dynamic. Be sure to note your entry and targets.
Pine Script® göstergesi
crypto_0sam0 tarafından
12
Fibonacci Retracement (L)-BronzeThe Automatic Fib Retracement - Bronze script indicates the 50% pullback line and upper 50% region. The lines of the upper and lower pivots, the support and resistance areas are also highlighted. Customisable Fib Length - Time period over which max and min pivots are chosen. Offsetfib - Automatically offsets the 50% region and pivots as your entry position will be some time after the upper and lower pivots are set. Works well when used in combination with an oscillator which highlights Divergence. A strategy based off buying the 50% with a defined stop loss and target can be the basis of your strategy. This tool will automatically plot those points but a defined Risk Management strategy will always be needed. Works best in Bullish trends but will work on all timeframes (Bullish correction in downtrend also possible). Previous pivots shown but be careful to identify which of the several pivots you are using. Start at a larger timeframe and move down as necessary. Pivots and retracements are dynamic. Be sure to note your entry and targets.
Pine Script® göstergesi
crypto_0sam0 tarafından
2
VWAP Anomaly V1I made some late reading yesterday and discovered the importance of the VWAP indicator, above all the idea that when the current price exits it it will always bounce back. Therefore I decided to build an indicator which detects when the current price escapes the VWAP margin. The indicator shows this three things: 1) When the current price exits the VWAP margin. 2) The strength of a VWAP trend 3) VWAP bounce point (Blue dots which can be used as support or resistance) By using the VWAP Anomaly V1 indicator, you can know if you find yourself in a reversal zone, and get a great entry point. Please, do have in mind no indicator is perfect, by using other indicator with the VWAP Anomaly Indicator your chances of success increase by a significant level. NOTE: Follow my predictions under your own risk
Pine Script® göstergesi
EmilianoMesa tarafından
23
T3 Entry and ExitI made this indicator to give clear entry and exit signals plus give signals when I should add onto my trades with no repainting!! The bottom indicator is set to 34 (the default settings). This gives me my entries and exits as shown by the green and red arrow. I use a 14 period setting for my signals to add onto my trade. If I am in a long trade as shown in the chart above and the 14 period T3EE has a fast line cross under the slow line and then a cross back over and I have not had my signal to close trade yet on the 34 period T3EE I will add to my long position. I cut the size of they order in half with each addition to my position. So if I entered with 2 lots I would add 1 lot with my first signal to add (shown by orange arrow) and then .5 lots with the second signal to add to my position and so on until it is time to close the position. If you day trade avoid entering positions between 4pm est and 9pm est. and the larger the ranges and the more trendy the market the better. Good Luck!!! If you have any questions let me know :)
Pine Script® göstergesi
stocktrader15 tarafından
6
Price Action + Support/Resistance with LabelsEntry Conditions: Long Entry (BUY): Based on the bullish engulfing pattern and price being above the resistance level. Short Entry (SELL): For demonstration, the short entry condition is set as price being below the support level and a bullish candle in the previous bar. You can modify this logic for your own use case. Stop Loss and Take Profit: Stoploss is plotted at the calculated stop loss level. Target is plotted at the calculated take profit level. Labels: For long trades, labels are added with "BUY", "STOPLOSS", and "TARGET". For short trades (if enabled), labels are added with "SELL", "STOPLOSS", and "TARGET". Labels are placed using label.new at specific locations on the chart (above or below bars). Alert Conditions: Alerts are created for both long and short entry signals so you can get notified when the entry conditions are met. How it works: BUY label will appear below the bar when a long entry condition is met. SELL label will appear above the bar when a short entry condition is met. STOPLOSS and TARGET labels will appear at their respective levels when an entry signal is triggered. The labels will appear on the chart to give you a clear visual cue of the entry, stop loss, and take profit levels. How to Use: Copy the script into your Pine Editor on TradingView and apply it to your chart. Observe the labels that show up on the chart: "BUY" will appear below the bar when long conditions are met. "SELL" will appear above the bar when short conditions are met (if using short logic). "STOPLOSS" will be plotted at the stop loss level. "TARGET" will be plotted at the take profit level. Optional Customization: You can modify the short entry condition based on your preferred method. You can adjust the length for the support/resistance calculation, the stopLossRR, and other parameters to fine-tune the strategy for Nifty 50 or any other asset. Let me know if you have any further questions or need additional modifications!
Pine Script® göstergesi
subairmkd97 tarafından
Entry Percent: EssamThis Pine Script code is designed to perform the task of computing and showcasing the profit percentage, profit value, and the duration for which a specific asset is held, all in real-time. The script effectively leverages the built-in resources to provide a seamless and robust experience, as it presents the calculated figures in an easily readable format on the chart, without causing any lag or disruptions to the chart.
Pine Script® göstergesi
esoliman2010 tarafından
1