Market Share AnalysisHOW THIS INDICATOR WORKS
-----------------------------------
I've been working on this new indicator to compare, for example, BTCUSD with it's market share or market dominance.
Market Share is the Coin's market cap divided by Total Market Cap. For example, Bitcoin Market Share is currently sitting around 45.7 %
Meaning, Bitcoin is around 45% of the total market of cryptocurrencies.
This indicator has different configurations you should pay attention.
1- Output:
- Market Share Change: this is the percentage change for market share from bar to bar moving up and down from a central line.
- Market Share: this is the close price from the market share symbol selected above.
2- Highlight:
- Divergences: Divergences shows the moment when the price rises and the dominance decreases or vice-versa. Divergences has extra config parameters (explained below).
- Rising/Decreasing: This plots a background red color when the market share price is below its MA(20) line and green background when it's above this line.
3- Show Abnormal signs:
This will print a plus sign in the market share chart when the market dominance rises or decreases too fast (Try changing StDev from 2.0 to 3.0)
4- Divergences:
Divergences has extra config parameters. For example, we want the price to rise or decrease 1% to show a divergence with the market share. Otherwise, it's not as important for us. Also, we can accept to consider an abnormal volume in the divergence or not.
HOW CAN WE INTERPRET THIS INFORMATION
-------------------------------------------------------
I've noticed when bitcoin rises in market share, it's doing or it's preparing for a Big Move. Usuallyl altcoins are dumping and Bitcoin gains the main attention. Best place to be is BTC.
I've also noticed when USDT.D dominance rises, means a big dump is happening or it's close to happen. The capital flow from different coins to Tether.
I have also observed the Bitcoin dominance divergences show us the moments of panic sell in the market. During those moments of extremely selling pressure, the capital flows from Alts to BTC again gaining market share when the price is dropping hard.
MORE INFO
--------------
This indicator allow us to change the symbol to any other like for example ETH.D. I encourage you to go to ETHUSD pair from your favorite exchange in 4H time-frame and change the symbol from this indicator to match ETH.D to have the Ethereum Market share to compare one next to each other.
You're going to find amazing divergences and rising/decreasing moments. Also, try looking at ETHBTC, and then check for ETH.D dominance. Amazing divergences will appear. I hope these are good signs for you too.
To reference any other symbol rather than BTC.D you can easily change the symbol to any other option like:
BTC.D => Ethereum Market Share
ETH.D => Ethereum Market Share
XRP.D => XRP Market Share
All these tickers are from CRYPTOCAP. So the correct ticker name would be for example: CRYPTOCAP:BTC.D to have the Bitcoin Market Dominance calculated by Trading View.
If you like the indicator, please like and comment below.
Good trades!
Komut dosyalarını "bollingerband" için ara
Uber Dank CCI + Captain Beefheart Bollinger Bands ExtraordinareIntroducing, the Uber Dank CCI + Captain Beefheart Bollinger Bands Extraordinaire
Its bollinger bands, CCI and CCI Bollinger Bands all in one.
The color of the CCI shows the condition of the bollinger band on chart.
Close > upper band = red
Close > basis = yellow
Close < basis = blue
Close < lower band = green
Then a bollinger band is printed on the CCI itself,
The background color displays the condition of the CCI bollinger band by the same logic as the CCI color.
CCI > upper band = red
CCI > basis = yellow
CCI < basis = blue
CCI < lower band = green
The exclamation marks tell you when the conditions are coming to an end. They check the last two bars to see if both the CCI and the closing price are under their bollinger bands at the same time for at least one of those bars, and they check the current bar that at least one of those conditions has ended. That is why they will most often print two exclamation marks in a row.
MechaAlgoWhat is MechaAlgo?
MechaAlgo was created to assist any type of trader on a day to day basis. Our intelligent and accurate algorithms turn complex charts into profitable plays, minimizing losses and maximizing profits. We hope that you will find use in the tools and resources we provide, and we will continue to improve on our products in order to take your trading to new heights!
Any Time, Any Market
Our indicators work with real time data on any market. This means that any kind of trader will find our tools useful, regardless of what you are trading.
Feature List
Multiple Signal Modes
Numerous Candle Coloring Modes
Reversal Cloud Overlay
Auto Support & Resistance
Auto Trendlines
Auto Profit Targets
Real Time Informational Dashboard
Multi-Timeframe Trend Panel
Future Trend Projection
Many More Features to Come!
By using this script you acknowledge that MechaAlgo cannot guarantee you profit, and that this product was only created in attempt to benefit traders. You also acknowledge that past performance is not indicative of future results, and that the experience of other users or what you see online may not always be your experience.
Tradingview ToolkitA new trader's biggest barrier to entry is lack of understanding where they are in terms of time and price and with tradingview free they are often limited to just 1 or 2 extra indicators as many new traders slap on RSI and MACD as 2/3 free ones. While these indicators are fine for trend analysis, its important to know where the price is in relation to time. Thus, this all-in-one script is meant to have a lot of customizable utility to save on indicator spots and act as a hotspot for many common needs.
-2 Sets of VWAP line w/ standard deviation bands with customizable timeframes.
-1 more customizable timeframe VWAP line (no std dev bands) to use as a long time frame reference
-Ability to plot previous VWAP close prices over current timeframe on all VWAP lines w/ basic color changing if price closes above/below
-2 Sets of Bollinger Bands with customizable source length and MA type
-3 customizable moving averages with custom timeframe/resolutions
-Inside candle barcolor repainter to easily notice if a candle was inside the range of the previous candle (price contraction)
Not meant to have everything on at once, but simply a place to enable and disable different things and save spots for more important things
[klemenxina] BB% MMABB% based indicator. It tracks the percentage distance between price and its deviations. Using this it shows overbought and oversold levels, signalling a good chance for mean reversion.
Triangles signal a good chance of price changing direction. Meaning green triangle = bull and red triangle = bear.
Script also includes warnings for change of trend when blue diamonds are printed. These indicate a deviation of the indicator baseline (BB%).
For the BB baseline, there are 7 options. When the testing is finished I will eliminate the bad ones.
The indicator works on all timeframes and has inputs for MA lengths, a different input for Hull MA variants and bb% deviation length.
Colouring options include a single colour, position colour which colours the baseline depending where it stands on the scale(+-50) and trend colour that uses trend detection for baseline colouring (red = bear, green = bull)
Script also includes divs.
Users can change the TF of the indi.
If you have any improvement ideas MSG me.
Advance AMA with Sylvain BandsMany traders believe that the moving averages are favorite tools and analysts have spent decades trying to improve moving averages partiularly the simple moving average. One way to address the disadvantages of moving averages is to multiply the weighting factor by a volatility ratio which is called Adaptive moving averages.
This indicator uses an special adaptive moving averages which is developed by John Ehlers. The model adapts to price movement “based on the rate change of phase as measured by the Hilbert Transform Discriminator”. This method of adaptation features a fast and a slow moving average so that the composite moving average swiftly responds to price changes and holds the average value until the next bars close. In addition, the smoothed Volatility Bands were created by Sylvain Vervoort is included.
HARSI - HeikinAshi RSI (with Bollinger Bands)This is my first published script. I hope it might be useful!
This is a modified RSI that attempts to give smoother values. It takes 4 different input lengths and plots them in a similar way as Heikin-Ashi candles does.
It can be used in the same way as a regular RSI.
It also includes Bollinger Bands that might help identify overbought/oversold situations.
The script uses a slightly modified Allanster's 'Heikin Ashi source function' (many thanks for that very useful script!).
Easy Entry/Exit Trend Colors (With Alerts)This is an updated version of user Algokid's script called 'AK MACD BB INDICATOR V 1.00'. You can find that original script here:
I added many alerts along with the Bullish and Bearish alerts when the MACD crosses over the Upperband or crosses down on the Lowerband.
I personally use this indicator with Crypto charts (Bitcoin on a 15min, 1hour, and 4 hour timeframe) as one of many confirmations that it's a good time to enter a trade. This script was made to be easy to follow with the colors of GREEN triangles being a good uptrend or entry confirmation, and RED being a confirmation to sell/short or exit your trade.
It's important to use this indicator in combination with other indicators that can give you more confirmations to enter or exit a trade, and make sure you are on normal candles and not HA or any other candles as you can get wildly inaccurate results.
This script also has the Death & Golden crosses, which is the slow and fast moving averages crossing over each other. I don't use this as an additional confirmation, it's just nice to know where the cross happens.
Triple Bb* Triple Bb display maximum 3 Bollinger Bands and each bands could be easily adjust.
* Each Bands Adjustable:
1. Source
2. Period
3. Standard Deviation
4. Color
5. Width
6. Show / Not Show
Smoothed Volatility Bands [CC]The Smoothed Volatility Bands were created by Sylvain Vervoort (Stocks and Commodities Sep 2020 pg 19) and this is a heavily customized version of regular Bollinger Bands that take volatility into account. Feel free to change the moving average since Vervoort recommended trying that out. Buy when the indicator line turns green and sell when it turns red.
Let me know if there are any other indicators you want me to publish!
Alert for 3Commas Bollinger StrategyThis is just an alert for the 3Commas Bollinger Strategy written by tedwardd
Rate Of Change Bands [CC]The Rate Of Change Bands were created by Vitali Apirine (Stocks and Commodities March 2021 pg 14) and this indicator is a great method to not only check the momentum but also check the trend strength as well. I have color coded the lines so buy when the line turns green and sell when it turns red.
Let me know if there are any other indicators you want me to publish!
2 Multi-Timeframe Bollinger BandsThis is two separate Bollinger bands in one study. Customizable middle BB line type ( SMA , EMA , VWMA ), legnth, colors, and deviations provided at .5 increments.
Someone else has a very similar Bollinger Band study but the code was hidden, so I figured I would remake as a learning challenge since I'm new to pinescript and this is the best way to learn it imo.
There will be updates to this script in the future but for now it serves its purpose lol. Publishing this version early as I wanted to give some friends access to it
In terms of usage, I like 4h 50 SMA alot . Having two sets of Bollinger bands is nice so you can turn one off or swap between time frames and such. In terms of techniques using both bbands, I haven't really played with it too much yet but simple things like 1h 50sma bbands expanding past the 4h 50sma bbands probably indicate an exaggerated move in that specific time frame, etc etc.
Hope this helps!
Bollinger Bands Bar ColoringThis is a simple script that colors bars/candles based on where price is relative to the basis, and the upper and lower bands of the Bollinger Bands.
If price is above the basis, candles will be colored green, and if price is below the basis, candles will be colored red.
If price is outside of the bands on either side, the candles will be colored a darker shade of either color depending on if it is above or below.
I created this indicator because I like that at a glance I can have an idea of the bullishness or bearishness of price action based on the Bollinger Bands, without actually having the Bands overlayed on my charts.
It's also quite nice because I find that the areas where there is a shift in candle color (especially from green to red and vice versa) aid in identifying levels of support and resistance, and shifts in market structure.
I have another indicator that is a huge modification of the Bollinger Bands %B, which includes the candle coloring (and MAs), but this frees up space on my chart while still providing me with the primary information I'm looking for.
VWMACDV2 w/Intraday Intensity Index Histogram & VBCB Hello traders! In this script i tried to combine Kıvanç Özbilgiç's Volume Based Coloured Bars, Volume Weighted Macd V2 and Intraday Intensity Index developed by Dave Bostian and added to Tradingview by Kıvanç Özbilgiç. Let's see what we got here;
VBCB, Paints candlestick bars according to the volume of that bar. Period is 30 by default. If you're trading stocks, 21 should be better.
Volume Weighted Macd V2, "Here in this version; Exponential Moving Averages used and Weighted by Volume instead of using only vwma (Volume Weighted Moving Averages)." Says, Kıvanç Özbilgiç.
III, "A technical indicator that approximates the volume of trading for a specified security in a given day. It is designed to help track the activity of institutional block traders and is calculated by subtracting the day's high and low from double the closing price, divided by the volume and multiplied by the difference between the high and the low."
*Histogram of vwmacd changes color according to the value of III. (Green if positive, yellow if negative value)*
VWMACD also comes with the values of 21,13,3... Which are fibonacci numbers and that's how i use it. You can always go back to the good old 26,12,9.
Other options according to the fibonacci numbers might be= 21,13,5-13,8,3-13,8,5... (For shorter terms of trading)
Trading combined with the bollinger bands is strongly advised for both VWMACD and III. VBCB is just the candy on top :)
Enjoy!
Bollinger Bands + VWMA SignalIn this tool we can use Bollinger bands together with VWMA (volume weighted moving average) and Buy/Sell signals.
Red lines shows sell opportunities and green lines shows buy opportunities.
Sell and buy opportunities are deducted based on two moving average: (base MA) and VWMA.
This tool works in any time frames, but 4H is recommend.
The base moving average is set to 89 (in 4H) and you can change it to any values like (13, 21, 34, 55, 89, 144, ...).
The long(200) moving average can be used as a trend indicator, as well as support and resistance.
You may leave a like of you find it useful.
Squeeze Momentum [Plus]The "Momentum" in this indicator is smoothed out using linear regression. The Momentum is what is displayed on the indicator as a histogram, its purpose is obvious (to show momentum).
What is a Squeeze? A squeeze occurs when Bollinger Bands tighten up enough to slip inside of Keltner Channels .
This is interpreted as price is compressing and building up energy before releasing it and making a big move.
Traditionally, John Carter's version uses 20 period SMAs as the basis lines on both the BB and the KC.
In this version, I've given the freedom to change this and try out different types of moving averages.
The original squeeze indicator had only one Squeeze setting, though this new one has three.
The gray dot Squeeze, call it a "low squeeze" or an "early squeeze" - this is the easiest Squeeze to form based on its settings.
The orange dot Squeeze is the original from the first Squeeze indicator.
And finally, the yellow dot squeeze, call it a "high squeeze" or "power squeeze" - is the most difficult to form and suggests price is under extreme levels of compression.
Now to explain the parameters:
Squeeze Input - This is just the source for the Squeeze to use, default value is closing price.
Length - This is the length of time used to calculate the Bollinger Bands and Keltner Channels .
Bollinger Bands Calculation Type - Selects the type of moving average used to create the Bollinger Bands .
Keltner Channel Calculation Type - Selects the type of moving average used to create the Keltner Channel.
Color Format - you to choose one of 5 different color schemes.
Draw Divergence - Self explanatory here, this will auto-draw divergence on the indicator.
Gray Background for Dark Mode - to make them more visually appealing.
Added ADX (Average Directional Index) that measure a trend’s strength. The higher the ADX value, the stronger the trend. The ADX line is white when it has a positive slope, otherwise it is gray. When the ADX has a very large dispersion with respect to the momentum histogram, increase the scale number.
Added "H (Hull Moving Average) Signal". Hull is a extremely responsive and smooth moving average created by Alan Hull in 2005. Have option to chose between 3 Hull variations.
Added "Williams Vix Fix" signal. The Vix is one of the most reliable indicators in history for finding market bottoms. The Williams Vix Fix is simply a code from Larry Williams creating almost identical results for creating the same ability the Vix has to all assets.
The VIX has always been much better at signaling bottoms than tops. Simple reason is when market falls retail traders panic and increase volatility, and professionals come in and capitalize on the situation. At market tops there is no one panicking... just liquidity drying up.
The FE green triangles are "Filtered Entries"
The AE green triangles are "Aggressive Filtered Entries"
Bollinger Band Calculation ToolIntroducing the Bollinger Band Calculation Tool
What are Bollinger Bands ?
According to Investopedia ....
"In the 1980s, John Bollinger, a long-time technician of the markets, developed the technique of using a moving average with two trading bands above and below it.
Unlike a percentage calculation from a normal moving average, Bollinger Bands® simply add and subtract a standard deviation calculation.
Standard deviation is a mathematical formula that measures volatility, showing how the stock price can vary from its true value.
By measuring price volatility, Bollinger Bands® adjust themselves to market conditions.
This is what makes them so handy for traders; they can find almost all of the price data needed between the two bands."
Classic interpretations of Bollinger bands from Fidelity Investments....
"When the bands tighten during a period of low volatility, it raises the likelihood of a sharp price move in either direction.
This may begin a trending move. Watch out for a false move in opposite direction which reverses before the proper trend begins.
When the bands separate by an unusual large amount, volatility increases and any existing trend may be ending.
Prices have a tendency to bounce within the bands' envelope, touching one band then moving to the other band.
You can use these swings to help identify potential profit targets.
For example, if a price bounces off the lower band and then crosses above the moving average, the upper band then becomes the profit target.
Price can exceed or hug a band envelope for prolonged periods during strong trends.
On divergence with a momentum oscillator, you may want to do additional research to determine if taking additional profits is appropriate for you.
A strong trend continuation can be expected when the price moves out of the bands.
However, if prices move immediately back inside the band, then the suggested strength is negated."
This indicator contains a standard set of Bollinger Bands with the addition of a Test Closing Price calculation function.
It displays a standard set of Bollinger Bands by default.
How do I use the Test Closing Price function ?
Enter a test price in the Test Closing Price box in the settings, and then click the "Use Test Price" button.
The indicator will then replace the current Bollinger upper, lower and basis-lines with plots showing the resultant lines if price were to close at the Test Closing Price.
An information panel will appear which displays the test closing price and the resulting Bollinger-upper, Bollinger-lower and basis-line prices.
Can display up to 10 decimal places and has adjustable label offset.
It will also plot lines outlining the resultant closed candle body for clarity.
To return to "Standard Bollingers" just click off the "Use Test Price" button.
Knowing exactly what the Bollinger bands and Basis will do if a particular closing price is met can be useful in a variety of ways to traders who use Bollinger Bands® in their trading.
It is possible to work out exactly what closing price is required to get above or below a Bollinger band which is normally difficult as Bollingers react to the change in price.
Users can also experiment with different Test Closing Prices [/i to see exactly what effect this would have on the Basis moving average and on the Bollinger bands themselves.
Angle of Bollinger Bands AlertThis script is used to calculate angle of Bollinger Bands and also setup alerts.
The angle is based on the rules:
- if the previous 2 is 1.1, previous 1 is 1, and the current is 1.1, then the angle should be 90 degrees.
- if the previous 2 is 0.9, previous 1 is 1, and the current is 0.9, then the angle should be 270 degrees
If upper angle is below 90 degrees and close is above the average, it is long signal.
If lower angle is above 270 degrees and close is below the average, it is short signal.
- It is good for catch trend trading.
- Not good for swing trading as the BB changes are very tiny but angles for upper may hit below 90 degrees or angle of lower may be above 270 degrees.
Bollinger on Bollinger OscillatorThis study is a user-friendly workaround to the BBOE+ (attached at the bottom).
I applied Bollinger Bands on BB Oscillator which spend his time bouncing between +100 -100 levels both representing extremes market conditions. You can use it to spot reliable entries/exits opportunities.
During an uptrend when the oscillator tends to -100 and the lower BB turn up you should consider a BUY. Do the same thing when the oscillator pushes under the lower BB nearby the Zero Line.
Make the opposite during a downtrend.
Also look for divergencies that occurs nearby the borders and BB squeezes too.
You can vary both the lenght for the Oscillator and BB.
Use “Upper Multiplier” and “Lower Multiplier” to set two different StDev from the basis (if you need).
You may also consider to apply an offset to the BB.
Is up to you to match the configuration that better-fits your market and time frame.
Default settings could well fits this IXIC 4H Chart.
So that this is basically a price-based indicator you would better consider to pair it with a volume-based or an absolute-momentum-based one.
SHARING IS INTENDED FOR EDUCATIONAL PURPOSE ONLY. NOT FOR PROFESSIONAL USE.
WILL APPRECIATE ANY FEEDBACK, QUESTION, SUGGESTION. (*)
(*) Please don’t ask me for “magic-setting” that do not exit, nor for “kaleidoscopic effects” cause I’m a big fan of such a minimalistic yet profession layouts.
FOLLOW UP TO CHECK UPDATES!
Bollinger Oscillator Extreme + ADXSHORT DESCRIPTION
This study is an improved, flexible, fully-customizable version of the one proposed by Steve Karnish of Cedar Creek Trading, who aimed to create an oscillator based on Bollinger Bands , with the goal of spotting divergencies that occurs outside the bands yet providing valuable entries on the crossings trough a smoothed signal.
IMPROVINGS
Made a Zero Line normalization, where 0 is essentially the BBs basis MA, whereas +100 -100 represents those classic 2 Stdev;
Added two levels of interest based on golden ratio working with the two above to get such an Overbought/Oversold Area. Those levels slightly move apart from a 1.5 Stev.
Made possible to set EMA as basis average instead John’s classic SMA ;
While I kept the original “CCT Oscillator” as a reliable divergence-hunter, I get from it the “Smoothed Oscillator” with a triple average smoothing. You can only play with the first smoothing step by “Oscillator Smoothing” while following are fixed.
Despite little differences occurs, you can consider the Smoothed Oscillator itself as the Signal on the original CCT Oscillator.
Derived the “Signal” that works on the Smoothed Oscillator. You can play with different smoothing length.
Add a customizable ADX which helps weighting trend strength, weakness, choppiness . (mirrored on the Zero Line for aesthetics only)
Add a “BB Width” representation so as you can stay in touch with BB volatility , squeezes, and so on. It is a non-analitic data (not 100 normalized). Use “BBW Multiplier” to match visual reading.
HOW TO USE (NOT TO USE)
The indicator works well when strong directional moves occurs and even better in a sideways market (wide trading range). So there are three main evaluable application:
During an Up-trend, spotting negative divergencies on CCT Oscillator in the Oversold Area (better above +100) tell us that a correction or a reversal will probably occur. It’s time to consider a stop profit or look for a good re-entry after the pull-back.
During a Down-trend, spotting positive divergencies on CCT Oscillator in the Overbought Area (better below -100) tell us that a correction or a reversal will probably occur. It’s time to consider a stop profit or look for a good re-entry after the pull-back.
In a Sideway Market, look for both positive and negative divergencies on CCT Oscillator in the Oversold/Overbought Areas, trading in the range, better with the confirmation from such a Stochastic and a Volume based indicator.
>>> If you're not a pro you would better left counter-trend and mean-reversal setups to “trading titans”. <<<
“OK! And what about signals!?” you tell. :D There are many ways to get signals from crossings and it’s up to you to find what work better to you needs. You can start testing the original Steve Karnish method, using the “CCT Oscillator”/“Smoothed Oscillator” crossings (a 9 period smoothing on a 20 period BB could be a reasonable begining).
Whipsaws makes it difficult? Give a try to “Smoothed Oscillator”/“Signal” crossings. Observe how the price act when “Smoothed Oscillator” penetrate Overbought Area from above or Oversold Area from below after a divergence took place.
Test a lot BB Length-Signal Smoothing combos.
Test with EMA instead using John’s SMA .
Never forget the divergencies’ reliability is time-correlated yet timeframe-correlated too (the longer the better!).
Never forget that the Zero Line (as the basis of BBs) tends to act as resistance/support.
I do the best I can to realize such a flexible tool. Now is up to you to find what better suit your needs.
MEDTRONIC Daily
MORE SUGGESTIONS
This script won’t be an out of the box stategy as no other indicator by itself, tough if you tell it could become a piece of the puzzle.
So that his is basically a price-based indicator you would better consider to pair it with a volume-based or an absolute-momentum based one .
Most important is you first focus on the market in order to detect strong uptrend/downtrend or sideways, better using a supertrend, moving averages (or whatever works better for you) paired with a momentum indicator .
As literatures explains Bollinger Bands (such many others indicators) do their best in ranging markets, yet this version could be as useful when a strong directional move takes place.
THIS WORK TAKES HOURS OF RESEARCH, DEVELOPMENT, TESTING…
SHARING IS INTENDED FOR EDUCATIONAL PURPOSE ONLY. NOT FOR PROFESSIONAL USE.
WILL APPRECIATE ANY FEEDBACK, QUESTION, SUGGESTION! (*)
(*) Please don’t ask me for “magic settings” which do not exist at all, nor for “kaleidoscopic effects” cause I’m a big fan of such a minimalistic yet professional layouts.
FOLLOWUP TO CHECK UPDATES!
Baus BandsThe Baus Bands are a simplified version of another one of my trend following indicators, the Neapolitan Bands. This version only shows the trend trading zones in green and red. An additional 21 EMA with an ATR band was added as part of my own trend trading rules using these bands.
How do I read this indicator?
Is the blue band between and not touching the green or red clouds? The condition is ranging.
Is the blue band touching the green cloud? The condition is a bullish trend.
Is the blue band touching the red cloud? The condition is a bearish trend.
The trend trading rules are exactly the same as the default Neapolitans, but include an extra condition.
A trend has started once 2 conditions are met:
Price has entered either trending cloud.
The 21 EMA ATR band in blue is within the same cloud.
With those conditions met, if you expect the trend to continue, trade pull-backs to the blue band in the direction of the trending cloud.
Isn't this just a 21 EMA trading pull-backs strategy?
No. The 21 EMA alone is not sufficient in my opinion to define a range or trend technically. Always buying the 21 EMA pull-back, especially in a range, is not a great strategy by itself unless you've already identified price as trending. Baus Bands adds that trend identification.
Why make this?
Baus Bands show the conditions I personally use for catching trends and identifying ranges with these indicators, and shows only the information I use.
What's the purpose of the ATR band around the 21 EMA?
Sometimes price will open and close below the 21 EMA and cause some technical analysts will say the trend is over. I added the ATR specifically to get a volatility based, upper and lower bound range around the 21 EMA. that way I have an acceptable price range where price could move past the 21 EMA and still keep a trend valid using similar rules. I then saw that so long this ATR band (not the 21 EMA itself) was touching those trending clouds, then the trend has a good chance of continuing as long as that was true.
(FireflyTA) Adaptive RangeThe "Adaptive Range" tool consists of 3 modules that allow simple and advanced range S&R, trend and volatility analysis.
S&R Bands
Are similar to Bollinger Bands but calculated differently. They are more adaptive than traditional Bollinger Bands and take in more data to calculate more reliable S&R.
Center of Gravity
The COG is a 3-dimensional entity and a powerful target of short-term mean reversion. In contrast to a simple moving average for example, this indicator takes in multiple timeframes and multiple volatility metrics (stdev) besides the usual time dimension (length). Whenever price gaining a distance to the COG, expect a move back to it when it is showing weakness at significant S&R.
Adaptive SuperRange
The SuperRange is based on the COG and shows an outlier area which has a strong probability of rejecting price, catapulting it back to the COG. It is unaffected by the timeframe used and can only be customized by adjusting the length and stdev values.
