Şimdi başlat

"Volatility" için komut dosyalarını ara

Relative Strength Volatility Variable Bands [DW]This is an experimental adaptive trend following study inspired by Giorgos Siligardos's Reverse Engineering RSI and Tushar S. Chande's Variable Moving Average. In this study, reverse engineered RSI levels are calculated and used to generate a volatility index for VMA calculation. First, price levels are calculated for when RSI will equal 70 and 30. The difference between the levels is taken and normalized to create the volatility index. Next, an initial VMA is calculated using the created volatility index. The moving average is an exponential calculation that adjusts the sampling length as volatility changes. Then, upper and lower VMAs are calculated by taking a VMA of prices above and below the initial VMA. The midline is produced by taking the median of the upper and lower VMAs. Lastly, the band levels are calculated by multiplying the distance from the midline to the upper and lower VMAs by 1, 2, 3, 4, and 5. Bar colors are included. They're based on the midline trend and price action relative to the upper and lower VMAs.
Pine Script® göstergesi
DonovanWall tarafından
11
Indicator: Volatility Quality Index [VQI]Volatility Quality Index (VQI), by Thomas Stridsman, points out the difference between bad and good volatility in order to identify better trade opportunities in the market. This plots 3 lines: - Red line is the VQI (actually, sum of VQI). - Green line is the 9-period SMA of sum_of_VQI. - Orange line is the 200-period SMA of sum_of_VQI. Stridsman suggested to buy when VQI has increased in the previous 10 bars (use the SMAs) and sell when it has decreased in the previous 10 bars. IMO, use this with your other indicators as a confirmation signal. More info: www.3pips.com To use this indicator in your charts, click on "Share" button (top right on the chart). Click on "Make it mine" button on the dialog that pops up. Now, you will have a copy of this chart with the indicator's source code in it. Click on "{}" to open the source code of VQI_LB and save it to your custom scripts section.
Pine Script® göstergesi
LazyBear tarafından
15
Candlestick Strength and Volatility ReadoutDisplays a readout on the top right corner of the screen displaying a two basic calculations (volatility and strength; i.e. candlestick size and how close to the highs or lows it closed) for more convenient candlestick (price action) analysis. Due to restrictions with Pine Script (or my knowledge thereof) only the current and previous candlestick data is shown, rather than the one currently hovered over. The data is derived via two simple calculations; volatility being division between the range of the candlestick's high and low by the ATR; 'strength' (what I like to call it) being the range of the body by the range of the open to high or low, depending on the facing direction (positive or negative candlestick). These are expressed as percentages and will turn green depending on the set threshold. Using this, one can effectively automate calculations you'd have to do by hand otherwise. I personally use these as entry filters in my trading, so it helps to not have to measure, remeasure, and divide before each potential entry. Settings are implemented to change certain variables to your liking.
Pine Script® göstergesi
Zachx_618 tarafından
Volatility and Volume by Hour EXT(Extended republication, use this instead of the old one) The goal of this indicator is to show a “characteristic” of the instrument, regarding the price change and trading volume. You can see how the instrument “behaved” throughout the day in the lookback period. I've found this useful for timing in day trading. The indicator creates a table on the chart to display various statistics for each hour of the day. Important: ONLY SHOWS THE TABLE IF THE CHART’S TIMEFRAME IS 1H! Explanation of the columns: 1. Volatility Percentage (Volat): This column shows the volatility of the price as a percentage. For example, a value of "15%" means the price movement was 15% of the total daily price movement within the hour. 2. Hourly Point Change (PointCh): This column shows the change in price points for each hour in the lookback period. For example, a value of "5" means the price has increased by 5 points in the hour, while "-3" means it has decreased by 3 points. 3. Hourly Point Change Percentage (PrCh% (LeverageX)): This column shows the percentage change in price points for each hour, adjusted with leverage multiplier. Displayed green (+) or red (-) accordingly. For example, a value of "10%" with a leverage of 2X means the price has effectively changed by 5% due to the leverage. 4. Trading Volume Percentage (TrVol): This column shows the percentage of the daily total volume that was traded in a specific hour. For example, a value of "10%" would mean that 10% of the day's total trading volume occurred in that hour. 5. Added New! - Relevancy Check: The indicator checks the last 24 candle. If the direction of the price movement was the same in the last 24 hour as the statistical direction in that hour, the background of the relevant hour in the second column goes green. For example: if today at 9 o'clock the price went lower, so as at 9 o'clock in the loopback period, the instrument "behaves" according to statistics . So the statistics is probably more relevant for today. The more green background row the more relevancy. Settings: 1. Lookback period: The lookback period is the number of previous bars from which data is taken to perform calculations. In this script, it's used in a loop that iterates over a certain number of past bars to calculate the statistics. TIP: Select a period the contains a trend in one direction, because an upward and a downward trend compensate the price movement in opposite directions. 2. Timezone: This is a string input that represents the user's timezone. The default value is "UTC+2". Adjust it to your timezone in order to view the hours properly. 3. Leverage: The default value is 10(!). This input is used to adjust the hourly point change percentage. For FOREX traders (for example) the statistics can show the leveraged percentage of price change. Set that according the leverage you trade the instrument with. Use at your own risk, provided “as is” basis! Hope you find it useful! Cheers!
Pine Script® göstergesi
FutuRInvest tarafından
2
Volatility ZigZagIt calculates and plots zigzag lines based on volatility and price movements. It has various inputs for customization, allowing you to adjust parameters like source data, length, deviation, line styling, and labeling options. The indicator identifies pivot points in the price movement, drawing lines between these pivots based on the deviation from certain price levels or volatility measures. The script labels various data points at the ZigZag pivot points on the chart. These labels provide information about different aspects of the price movement and volume around these pivot points. Here's a breakdown of what gets labeled: Price Change: Indicates the absolute and average percentage change between the two pivot points. It displays the absolute or relative change in price as a percentage. Additionally, the average absolute price increase or the average rate of increase can also be labeled. Volume: Shows the total volume and average volume between the two pivot points. Number of Bars: Indicates the number of bars between the current and the last pivot point. Reversal Price: Displays the price of the reversal point (the previous pivot).
Pine Script® göstergesi
brettkind tarafından
26
Zero-line Volatility Quality Index (VQI) [Loxx]Originally volatility quality was invented by Thomas Stridsman, and he uses it in combination of two averages. This version: This doesn't use averages for trend estimation, but instead uses the slope of the Volatility quality. In order to lessen the number of signals (which can be enormous if the VQ is not filtered), some versions similar to this are using pips filters. This version is using % ATR (Average True Range) instead. The reason for that is that : Using fixed pips value as a filter will work on one symbol and will not work on another Changing time frames will render the filter worthless since the ranges of higher time frames are much greater than those at lower time frames, and, when you set your filter on one time frame and then try it on another, it is almost certain that it will have to be adjusted again Additionally, this version is made to oscillate around zero line (which makes the potential levels, which are even in the original Stridsman's version doubtful, unnecessary) Usage: You can use the color change as signals when using this indicator
Pine Script® göstergesi
loxx tarafından
2
Volatility indicator based on ATR Hello, I'm sharing to you a volatility indicator I've done in the last few weeks based on ATR. There is multiple functionalities on this indicator, the first one is an overlay displaying when an asset is in an "overvolatily zone" (displayed with red cross) and when we are in an "undervolatily zone" (displayed with green cross). You can change the sensibility of the signals in the parameters if you wish to have more or less greedy signals (it will only modify the overvolatility signals). By the way those signals are not working for week-ends because volatility works differently on week-ends and it's not a good idea to count week-ends in the calculations, so do not worry if you see no signals on weekends. Second part of the indicator is something I called "Atr bands" it's an equivalent to the famous Bollinger-Bands but based on ATR. I haven't backtested them yet but they seems really interesting in low ut (15 mins seems to be the best ut for those) and they seems pretty bad in high ut so they can maybe be useful for low ut scalping. Last thing, there is a parameter allowing you to display bands on the week-ends so you can easily see where the indicator won't give signals. I would be really happy if I could have some feedsback if you try the indicator :) Have a wonderful day
Pine Script® göstergesi
JuicY-trading tarafından
Critical Levels Mixing Price Action, Volatility and VolumeIntroduction This indicator has the purpose of setting levels, automatically, basing its creation on three aspects of the market: - price action - volume - volatility Price Action Algorithm I divided the candle into 3 parts: - body => abs (close-open) - lower tail => red candle (close-low) green candle (open-low) - upper tail => red candle (high-open) green candle (high-close) - total => high-low to give the signal the following conditions must be respected - the body must be smaller than a certain percentage ("MAX CORE SIZE%) and larger than a certain percentage (" MIN CORE SIZE%); - furthermore, the shorter tail cannot be higher than a certain percentage ("MAXIMUM LENGTH FOR SHORTE TAIL%"); Volume Algorithm The volume value must be greater than the volume EMA multiplied by a certain value ("Multiplier") Volatility Algorithm the True Range of the candle must be greater than the "ATR percentage" of the ATR Trigger If all these three conditions are met then and only then will the level be drawn that will include the prices of the longest tail of the candle (high/open or open/low or high/close or close/low). How to use Like any level, the situation in which the price is reached does not imply a market reaction, for this reason, the use together with moving averages or oscillators from which to extrapolate the divergences can be a valid tool. Using this indicator alone you can enter the market by placing a pending order above the high or low of the candle touching the level. Example: a bearish candle touches a low level, we place a pending buy order above the high of the candle a bullish candle touches a level located high, we place a pending sell order below the low of the candle
Pine Script® göstergesi
pascorp tarafından
3
Risk adjusted returns data (volatility optimised)RAR - risk adjusted returns. This methodology could be helpful in portfolio creation and position size risk management. We can set our own preference of risk tolerance via the X variable which is the exponent of volatility in our calculations. This gives an unlimited set of example portfolios on a given time-frame that can be sorted from return oriented to volatility reduction oriented as X increases. RARs are to be compared against eachother.
Pine Script® göstergesi
based77 tarafından
1
Volatility semaphore Support&Resistance multi timeframe [LM]Hello Traders, I would like to introduce you volatility semaphore support&resistance levels. The idea is the same as the pivot semaphore script of mine to spot the importance of support&resistence. It is little bit different than previous script as it uses different line API than previous volatility support& resistance multi timeframe . You have more control over hat and how many lines are rendered(better to use odd numbers in line count setting as it always finds 2 S/R lines). Also this indicator has setup for contol whether you want wicky candles or no by setting percentage of candle body that is accepted. I hope you will enjoy it.
Pine Script® göstergesi
lmatl tarafından
4
Session Volatility CalculatorHey traders! This script calculates the average volatility of trading sessions. You specify a start date, an end date, and a session time (eg. market open, Asian session etc) The script then scans through all the price action on your chart and calculates the average price movement during that specified period. What Is It For? I created this script for my own purposes when developing certain strategies and testing certain ideas. The purpose of this script is to give you an idea of how much price tends to move during certain times of day for certain markets. You could think of it as a "session's average true range". In crypto and forex this might be how much price tends to move on certain pairs during the Australian/Asian session, or the European session, or the overnight U.S. session etc. In stocks this might be how much a symbol tends to move during the first hour of the day or the last hour of the day. The point of calculating this information is for better understanding how markets move during certain times of day. It's not a perfect science obviously since some days can be wilder than others depending on what fundamental events are developing, but it's useful information to have for times when there are no expected volatility-inducing events. This info can help with optimizing targets and stop loss placement for certain day-trading strategies, and just generally getting an idea of what kinds of moves you might reasonably expect out of overnight positions or certain times of day etc - or at least that's what I use it for. Settings Hover your mouse over the "i" symbol to get more information on the script's settings, but here's a brief description: Start Date: The date to begin calculating from (set to 1000 by default so it scans the entire chart). End Date: The date to stop calculating (set to 2099 by default so it scans the entire chart) Time Session: This is the time session during the day that you want to analyze. Color Background: If turned on, this setting changes the background color to highlight the session. Indicator Values The indicator outputs a handful of values onto your chart. This is what the colors correspond to: Top-Right Box: The average price range during the given time of day over historical price action. Green Number: The recent session's highest price. Red Number: The recent session's lowest price. Purple Number: The recent session's price range (high - low). Orange Number: The recent session's range ÷ the average (outputs a relative % of the average).
Pine Script® göstergesi
ZenAndTheArtOfTrading tarafından
10
Using The AM/GM Inequality To Estimate VolatilityA volatility indicator derived from the AM/GM inequality. I don't think it will be necessary to describe the usage and interpretation of such indicator, and I don't think it is super useful, however, this is not the case of the script, which contains three ways to compute the geometric mean, with a classic, a simple, and an efficient way. The AM/GM inequality is also a really interesting concept, and I'll try to"prove" it in this post by using DSP. I also added more comments in the script in order to highlight some stuff. The AM/GM Inequality When we talk about the mean, we are referring to the "arithmetic" one by default, but there exist more types of means. Two other ones include the "geometric" and "harmonic" means, both are part of the Pythagorean means with the arithmetic mean. Each one of them as several properties, but the most interesting aspect is their inequality, that is: HM <= GM <= AM The arithmetic mean is the one with the highest value, while the harmonic mean is the one with the lowest value. In the case each data point is equal to each other, all the means have the same value. In our case, the inequality of interest is the inequality between the geometric and arithmetic mean, where the geometric mean is lower or equal than the arithmetic one. Many proofs/explanations exist, I'll try my version using DSP, where instead of thinking about means, we think about rolling means, which allows us to interpret them as low-pass filters. So we end up having the geometric moving average (GMA) and arithmetic moving average (SMA). We know that GMA <= SMA , the SMA has a unity passband, this implies that the GMA has a passband lower than 1 (for non-equal input values), this explains why the GMA is smaller than the SMA. In order for a FIR filter to have a passband lower than 1, the sum of the filter coefficients must be lower than 1. In order to further proves this consider the following equation: sqrt(a×b) = k×a + k×b Here sqrt(a×b) is the geometric mean of a and b , the right-hand side of the equation is a weighted sum between a and b and coefficient k , we want to solve the equation with respect to k , if k×2 < 1 then we have the proof that GMA < SMA . The solution with respect to k is: k = sqrt(a×b)/(a+b) which always gives a number lower than 0.5, as such k×2 < 1 and thus the passband is lower than 1. If our input values are equal to each other, we end up with the following solution for k : k = sqrt(a×a)/(a+a) = a/(2×a) = 0.5 as such the GMA has the coefficients of an SMA as long as the input values are equal to each other. Because of this inequality, we can subtract the SMA to a GMA and take the square root of the result in order to have a volatility indicator, however, both moving averages are still pretty close to each other, which gives a very small result for the indicator. Uwu I am a bit tired, better indicators coming up
Pine Script® göstergesi
alexgrover tarafından
2
BTC Volatility Index[Benson]This indicator is for choosing the best timing to long BTC move future on FTX. The basic idea is that when BTC's price volatility Index is relatively low(under 50 in 4hr timeframe or under 200 in D timeframe), it's more likely to have huge volatility afterwards, which it's a good time to long BTC's move future. Green background --> Move future expected strike price Red background --> Good timing to long BTC move future
Pine Script® göstergesi
bensonsuntw tarafından
Revolution Volatility Bands With Range Contraction Signal VIIAlso one of my favorite indicators. Very simple and easy to use. Essentially volatility bands with a technical analysis pattern, the triangle/wedge, which I have called "contraction signal". Put simply: When price is written in blue, volatility overall is falling. When the outer bands start to fatten up in blue, a contraction signal is forming. Works with any length of your choosing.
Pine Script® göstergesi
via-negativa tarafından
40
Best Volatility CalculatorHello traders, This indicator shows the average volatility, of last N Periods, for the selected time frames. You can select up to 2 timeframes with this version Volatility is defined as the close of current candle - close of the previous N candle Presented as Currency, Pip, percentage labels in a panel below. Will calculate in real-time only for the current instrument on the chart. The indicator is coded to not be repainting Example In the indicator screenshot, I used a lookback period of 1. That compares the current candle close versus the previous one for the daily and weekly timeframe Showing how the results are calculated for the weekly calculations Enjoy :) Best regards Dave
Pine Script® göstergesi
Daveatt tarafından