Şimdi başlat

"N+credit最新动态" için komut dosyalarını ara

Commodity Channel Index + Relative Strength Index (Same Scale)Mashup, combining (adjusted) RSI and CCI. These two indicators serve similar functions, but on different scales. I combined the two versions from the TradingView Built-In library into one chart, keeping the default setting for the CCI signal lines and fitting the RSI's default signal lines to them, so that they line up. I therefore adjusted the RSI to match the approximate range of the CCI and added additional lines to represent the maximum and minimum values of the RSI (0 - 100). I did that by multiplying the RSI with 5, and subtracting 250. Adjusted RSI = (RSI * 5) - 250 So the upper signal line (default: 70) now matches the line used for the CCI at 100. The lower signal line (default: 30) lines up with -100. If you want to adjust them, you need to use the formula. I annotated the code if you want to dive deeper. This indicator uses the original code and styling of the default Built-In RSI and CCI. Credit goes to the appropriate developers. My only intent is to mash up both of these indicators, making it easier to compare them. Interpreting this indicator is the same as interpreting the underlying indicators. If you find any unexpected correlations, comment.
Pine Script® göstergesi
henlin tarafından
2
HR from Prev closeThis is my simple indicator to help identify whether an upside bar is unusual or not. I like to see a bar as particularly unusual like a 15% move in a long period where a typical move is under 5%. It usually signals a buying climax and the end of that short term rally. I compares the previous bar's close to the current bar's high and is expressed as a percentage. I am not much of an expert in pine so I did not program it to plot as a histogram but that is how I like to view it. If you know how, by all means, send me the edit and I will credit you.
Pine Script® göstergesi
rbarnesy tarafından
LR from Prev closeThis is my simple indicator to help identify whether a downside bar is unusual or not. I like to see a bar as particularly unusual like a 15% move in a long period where a typical move is under 5%. It usually signals a selling climax and the end of that short term selloff. I compares the previous bar's close to the current bar's low and is expressed as a percentage. I am not much of an expert in pine so I did not program it to plot as a histogram but that is how I like to view it. If you know how, by all means, send me the edit and I will credit you.
Pine Script® göstergesi
rbarnesy tarafından
Speculation Ratio TerritorySpeculation Ratio Territory It is used to find the Index Top or Bottom which will define the buying and selling zone. It should be checked on a weekly chart. Example : As Nifty Trades around 248 days in a year. So, 248/2 = 124 Now Use 124 DSMA on weekly chart. Suppose Nifty 124 DSMA is @16000 and Current Market Price is 16500, then SRT = 16500/16000 = 1.031 Top SRT of Nifty = 1.55 Bottom SRT of Nifty = 0.55 One should start investing when SRT value is between 0.55 to 0.75 And exit when SRT value is between 1.30 to 1.55 0.55 to 0.75 --> ENTER (Green Zone) 0.75 to 1.30 --> HOLD (Blue Zone) 1.30 to 1.55 --> EXIT (Red Zone) Credit for DSMA Script : //Deviation Scaled Moving Average by John Ehlers
Pine Script® göstergesi
Arijeet_Satapathy tarafından
23
BOSCILLATOR. A BOSS OSCILLATORI would like to first say I do not the indicator pieces. Would like to personally give thanks and credit to @MarkBench for coding this indicator and helping to get my vision for this system finally able to be published and used by anyone. I would also like the thank @lazy bear and @ChrisMoody for their bringing the Firefly oscillator and the SCHAFF TREND and the PPO price percentage oscillator to trading view. and @scilentor for his version of Godmode with LSMA . Thanks to @Shizaru for bringing Frama moving average (which we have adopted into the PPO as one of the base selections for the first time, as well as the ALMA ). Divergences have also been added. and components of the firefly have been removed such as the histogram. I have added two oscillators in the picture. The bottom is the standard settings. The above is how I prefer mine to look after tweaking the settings. Before I get into explaining how its used. I want to say all the indicators are open and none privately owned or at least owned by indivduals who brought them to trading view. Any due permission is granted at my disclocsure. I also want to say this is not your typical mashup of indicators as the is a very clear way to view and use this specifically. Also I want to say original tools from their original scripts are also improved. For example the PPO being used we have added the FRAMA and ALMA moving average basis option which it did not have before. And now everything has clear divergences and some other minor changers. but here are the rules and examples. THE BOSCILLATOR - A MULTI-LEVEL CONFLUENCE/CONFIRMATION FILTER VISUALIZATION Some shorthand (Main oscillator - firefly) (background wave thing - PPO ) (the red vertical up and down line with red and green dots - STC ) (the blue, yellow and red dots - warning dots) WHO IS THIS INDICATOR FOR? - This indicator itself is not meant to be a signal giver to buy or sell right now even though it could be and some of the original scripts are used as such. This indicator is actually meant to be a VISUAL CONFIRMATION & FILTER for trades taken in other methods outside of this indicator. What are some of those methods that may benefit from having this? Pivot point traders, FIB traders, Bollinger band traders, Moving average traders.. just to name a few. This indicator itself is meant to in a quick glance allow the trade to see the condition of many different elements outside of the main price and chart, and determine if that trade looks like it has too much risk, or if that trade looks suitable. It also provides a series of confirmations that could be used for adding to a position at different levels at the trade's discretion. OPTIMAL CONDITIONS FOR CONSIDERING A SHORT = The PPO is orange/red + the STC is at the TOP + the Firefly is above the midline. The warning dots are being printed at the top. There is regular or hidden bearish divergence present. OPTIMAL CONDITIONS FOR CONSIDERING A LONG = The PPO is light/dark green + the STC is at the BOTTOM + the Firefly is below the midline. The warning dots are being printed at the bottom. There is regular or hidden bullish divergence present. Triggers for scaling/adding into your position = Keeping in mind that this oscillator on its own is not meant to be the sole reason for taking a trade, here are some triggers you will see for getting into position (preferably with the optimal conditions being met) The firefly flips from a green line into a red slide and vise versa. The firefly crosses the midline up or down. The STC begins going up/down and triggers a green or red dot while crossing one of the levels at 20 or 80. The warning dots being made begin to be printed lower/higher than the dot before last. The PPO shift from one color to the next in the favored direction of the trade you wish to make. Signs for taking profit and protecting your trade = The Dots begin to print, the PPO changes colors at the top or bottom. the STC arrived are the top. FILTER SITUATIONS TO AVOID TRADES = Wise to not take a trade if the PPO and the firefly do not agree. For example - if the PPO is showing green yet the firefly is still red may be an indication that it is getting a bit late for you to enter the trade. Same with opposing divergences and warning dots contradicting the trade you are looking at. The STC being already on the bottom or top may be a small indication that trade may already have been a little too ripe, but on its own is not always the case. When selecting the PPO settings and moving average you are going to want it to be in favor of what you are trying to accomplish.IF you are one low time frames and trying to swing or scalp trade... chances are you want a reactive MA setting that iss responsive. Iwould recommend the HULL, ALMA, TEMA DEMA. For the Higher time frame the EMA or the T3 WDma can be wuite patient and helpful for a constant reminder of caution Some notes - for the swing and scalp trading... in my experience the PPO moving average basis sees more responsive changes with the FRAMA , ALMA , HULL settings. for entering a trade, at least a couple of your triggers being present increases the success rate by a lot. This chart illustrates the usefullness of having a Zero lag function for the firefly. The firefly should not be taken for signals or trades itself. However it is the most precise finder of divergences within the system. It is aways good to flip on and off zero lag just to take a quick look for divergences you might have mixed. In this chart illustrates the general visual look and order of events to guide you along your way. Starts with the PPO turning green or red or orange which is potentially time to get out of your current trade. Then it switched colors when reversal begins and that is when you want to at the same time see the STC, the firefly, and lower caution dots coming in around the same area (highlighted in blue squares). Now near the end you see a red box. This is a filter aspect. The PPO is green, yet the others are saying down/short. This does not mean it must be a long, however it is great warning to maybe avoid getting to bearish for the downside in that time. You want the PPO and line up with the others and it should be visually apparent that they all want to go the same way. Here is a list of some key elements (before changes this script made) of parts this oscillator includes. My original publication of my oscillation setup was blocked by the mods here.. this one however includes a large variety of items that have been altered from their original formats and a well-explained trading system to use it with. // Firefly Firefly Oscillator // PPO PPO PercentileRank Mkt Tops & Bottoms (@PuppyTherapy) // Divergence Divergence Indicator (any oscillator) // Godmode Godmode3.2+LSMA // Schaff Schaff Trend Cycle // Frama (FRAMA) Fractal Adaptive Moving Average
Pine Script® göstergesi
Gunslinger2005 tarafından
23
TMO with TTM SqueezeApplication of the TTM squeeze and the short-term momentum TTM Wave A in action. This is an example where the short-term wave will react faster than the TTM to give you a signal to start building your positions. This indicator needs to be combined with "TTM Wave A" (add to existing pane). The TTM Squeeze works like a better MACD. There is a zeroline and histogram bars above / below represent positive and negative momo. As the height of the bar decreases when above the zeroline, that is called decreasingly positive momo and as the height of the bar decreases when below the zeroline, that is called decreasingly negative momo. The dots on the TTM Squeeze: Red dots represent consolidation where Bollingers are inside the Keltner Channels and green dots represent a move out of consolidation or "squeeze fire". As price action comes out of consolidation there is a bigger move up/down depending on where momo is heading and where prices are (key support/resistance levels, fib areas). You want to use the TTM Squeeze and A wave TOGETHER - TTM Squeeze is your main momo and your A wave is a short-term momo wave that reacts faster and works as a leading gauge. You need to use them TOGETHER to gauge where price action may be heading. When the TTM Squeeze and A wave move lockstep together, let's say both are decreasingly positive, there is a good probability it continues to move in that direction to the next support levels. TWO bars on the TTM Squeeze of different heights is confirmation that in most cases means it will move in the direction of those bars. So if decreasingly positive, you'll see two darker bars. By the time you get your 2nd bar on the TTM Squeeze, it is often too late or you're losing profit. Way to counter that is after you get one darker bar in the opposite direction of current trend, use A wave to "predict" the next wave, the more A wave histogram bars going towards the other direction, the higher the certainty it will hit. Lastly, using these waves together works best when you look at it on MULTIPLE TIME FRAMES. (Credit for this details goes to Brady from Atlas).
Pine Script® göstergesi
sskcharts tarafından
15
TTM Wave AApplication of the TTM squeeze and the short-term momentum TTM Wave A in action. This is an example where the short-term wave will react faster than the TTM to give you a signal to start building your positions. This indicator needs to be combined with "TMO with TTM Squeeze" (add to existing pane). The TTM Squeeze works like a better MACD. There is a zeroline and histogram bars above / below represent positive and negative momo. As the height of the bar decreases when above the zeroline, that is called decreasingly positive momo and as the height of the bar decreases when below the zeroline, that is called decreasingly negative momo. The dots on the TTM Squeeze: Red dots represent consolidation where Bollingers are inside the Keltner Channels and green dots represent a move out of consolidation or "squeeze fire". As price action comes out of consolidation there is a bigger move up/down depending on where momo is heading and where prices are (key support/resistance levels, fib areas). You want to use the TTM Squeeze and A wave TOGETHER - TTM Squeeze is your main momo and your A wave is a short-term momo wave that reacts faster and works as a leading gauge. You need to use them TOGETHER to gauge where price action may be heading. When the TTM Squeeze and A wave move lockstep together, let's say both are decreasingly positive, there is a good probability it continues to move in that direction to the next support levels. TWO bars on the TTM Squeeze of different heights is confirmation that in most cases means it will move in the direction of those bars. So if decreasingly positive, you'll see two darker bars. By the time you get your 2nd bar on the TTM Squeeze, it is often too late or you're losing profit. Way to counter that is after you get one darker bar in the opposite direction of current trend, use A wave to "predict" the next wave, the more A wave histogram bars going towards the other direction, the higher the certainty it will hit. Lastly, using these waves together works best when you look at it on MULTIPLE TIME FRAMES. (Credit for this details goes to Brady from Atlas).
Pine Script® göstergesi
sskcharts tarafından
11
Effective Divergence Indicator What is EffDI? Effective Divergence Indicator(EffDI) is a modified Momentum indicator designed to detect divergences in stocks, futures, forex, and crypto, just to name a few. How does it work? It uses the EMA of daily velocity. Isn't this the same as Momentum No. Momentum compares the price x days ago, while this takes the EMA of the daily velocity. Why is it better than momentum in detecting divergence? Because it uses an EMA, an EMA gives weight to the latest prices. I don't know how to explain the logic behind this, but it works :) ok,ok, I get it, but how do I use it to buy, sell, and get a ton of profits? Refer to the diagram below. Steps: Step 1: Locate the divergence(marked A,B,C and D): no divergence, no trade. Step 2: Locate the last EffDI high. Mark that E. Step 3(entry): Buy when price goes above E. For shorts, Short Sell when price goes below E. Step 4(exit): Exit position when another divergence is detected, OR When A new Lower Low is formed. As you can see, if you follow the steps, there is a good chance the profits will come to you. Cheers! DO YOU WANT MORE GOOD INDICATORS LIKE THESE TO IMPROVE YOUR TRADING? Then, make sure to follow @Trader_ph (or i will eat all of your cookies) Feel free to use my code below, BUT make sure to credit me if you make any modifications. :)
Pine Script® göstergesi
Trader_ph tarafından
11
Squeeze Momentum StrategyJust turned LazyBears' Squeeze Momentum Indicator into a strategy. You can understand how it works and pay credit to LazyBear here: uk (dot) tradingview (dot) com/v/nqQ1DT5a/ Best results seem to be on the 4h chart. Added LazyBear's Volume Weighted Moving Average indicator, which can be used (select in strategy properties) to more selectively long or short if desired. Defaults to using 100% of your initial strategy equity (just my preference), and this cannot be changed without recoding the strategy, but should be easy to do if desired. Added leverage, trade risk, backdate time window and trade type selector inputs. Happy trading! Not financial advice.
Pine Script® stratejisi
AuthenticFlow tarafından
2
Everything RSIThis indicator includes: RSI Candles set to the default 14 length (un check Borders in the Style tab to see the candlesticks better) I like using the wicks as an early warning for a possible trend change, which is generally in the opposite direction of the wicks. It's also easier for me to draw trend lines using the RSI Candles vs the rsi plot line. 40 ema of the RSI Candles 2nd RSI set to the 20 length , which plots just inside the wicks of the RSI Candles. This RSI also highlights Oversold and Overbought levels. I sometimes leave the RSI Candle Borders checked and use the 20 RSI plot with the wicks of the RSI Candles Signals to look for Short or Long opportunities , which use the 5 sma of the RSI Candles crossing under the overbought and over the oversold levels. If you'd like to plot the 5 sma, remove the // at the beginning of the code on line 72. 3nd RSI set to the default 14 length which can be set to a different timeframe as the current chart. Default setting is the 1h. This RSI plots a + at the top of the indicator when it's above the 50 level and an x at the bottom of the indicator when it's below the 50 level. For me, this is just a visual aid when I'm scalping on lower timeframes. If the 1h RSI is above the 50 level, I focus on long scalps. If the 1h RSI is below the 50 level, I focus on short scalps. RSI Cloud which is formed by filling in the area between the 14 ema of both the 7 RSI and 28 RSI. I used part of @FnM_Capital 's Trend-Sniper script for my RSI Candles. Thank you! You're extremely talented and deserve all of the credit for your work. I'd also like to thank @SeanNance for answering all of my random coding questions!!! I've added the indicator to the example twice to show a couple of the ways I view the RSI's. The top indicator shows the RSI Candle Borders "un checked" and without the 2nd RSI plot. The bottom indicator shows RSI Candle Borders "checked", using 2nd RSI plot with the RSI Candle Wicks.
Pine Script® göstergesi
DDMyke tarafından
1
Standard deviation zones Support & Resistance [LM]Hi Guy, I would like to introduce you Standard deviation zones Support & Resistance horizontals. It draws line horizontals on high and low st dev zone. The colors are dynamic depending whether price is below or above the line. Credit is due to @Zeiierman for st dev zone calculation so shout out to him. There are various sections in setting: general setting where you can select source for zone calculation tops setting bottom setting show and hide section of the first timeframe show and hide section of the second timeframe Be aware that when new zone starts and is not finished yet than the top will trail the high of unfinished zone that could be also at the high of current candle and next candle it can change Any suggestions are welcomed
Pine Script® göstergesi
lmatl tarafından
5
Mod and Round To Tick FunctionI have not found this function anywhere on Tradingview but it can be very useful in setting orders in a strategy and non-integer boundaries for certain indicator designs. Its a bit underwhelming, but in other languages you can call a mod() function and the output will be the remainder of the integer. If you want to set an order at a specific tick value, particularly in futures, you can't set it at a specific tick when using calculated values like ATR or Standard Deviation without a function like this. It can also be used to clean up certain band/envelope style indicators if you want to have a straight line, but don't want to simply round to an integer. Credit for the round to tick aspect goes to the eternal fountain of resources, the Backtesting & Trading Engine script from @pinecoders This is just another tool to throw in the box for when you might need it.
Pine Script® göstergesi
kurtsmock tarafından
1
FIR Trend Filter (Sawtooth and Square Waves)Experimental script! Using sigma approximation with Sine wave to form Sawtooth and Square waves, for a Finite Impulse Response filter. Higher harmonics make the sawtooth or square wave more "exact", at the expense of more computation. It also makes the filter more "sensitive". I wouldn't exceed 100, but you're the boss. The default number of harmonics is 20. The length is 20, too. Why? Because we are currently in 2020. Silly, I know. Feel free to play around with the settings and tune it to your liking. How to use it is pretty straight forward: Green is trend-up and red is trend-down. Credit to alexgrover for the template.
Pine Script® göstergesi
handsheik tarafından
2
Momentum Explosion 2CCI RSI"Momentum Explosion Template for Mobile Metatrader", that is a trading system trend momentum based on two Commodity Channel Index (CCI) , RSI and two Moving Averages.The trading signals are generated by the crossing of the moving averages confirmed by the agreement of the two CCIs and the RSI. Two Moving averages Filtered by double CCI and RSI Credit is to Dimitri Author Beejay (Forex Factory) Trading Rules Momentum Explosion Buy EMA 8 crosses upward SMA 26. CCI 34 periods > 0 CCI 55 periods > 0 RSI 26 > 48. Sell EMA 8 crosses downward SMA 26. CCI 34 periods < 0 CCI 55 periods < 0 RSI 26 < 48.
Pine Script® stratejisi
capam tarafından
GAURs Polynomial Regression ChannelsThanks to The Sweet Lord , here is the Gaur's Polynomial Regression Channel. Its a Polynomial Regression Channel but applied a little differently. Wont go into technical details much. Overview of options is as follows- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Channel Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1. Degree of Polynomial: 1/2/3 Default = 3 Defines the degree of polynomials - 1,2,3. Note here, degree 1 will not be a straight line since its applied differently. Try different degrees for different fits and market conditions. 2. Channel Length: Default 30 (candles) You can go beyond 100 or 200 candle lengths but smaller is the usual preference of Poly-Reg-channel traders. It all depends on market conditions and your style of trading. Do your research. I am usually comfortable with a range of 20-50 (in crypto markets). 3. Basis of Channel height/boundries: ATR/Manual Default: ATR ATR provides a dynamically adjusted entry/exit bounds of the channels. As ATR changes, the channel bounds also changes its height. It can also be fixed manually. Manual heights wont change automatically. 4. Basis of Y-Value: open/close/ sma / ema / wma /hilow Default: close Y- value is the y value of the (x,y) coordinates used while calculating the regression coefficients. Dont worry about it, its nothing serious. 5. Apply channel smoothning using sma?: Yes/No Default: Yes Without smoothning, the channel does not "look" good. 6. Shaded Area Height Percentage: Its the extra margin for the channel. Its in percentage of the total height (defined 3 above) of channels. The shaded area provides an extra allowance for your entries or exits beyond the ATR or manual heights. 7. Plot RSI?: Yes/No Default: Yes Plots RSI (orange line in between the channel - its different from the dotted center line) considering the downbound of channels as 0 (oversold) and upbound of channels as 100 (overbought) 8. Plot 200 sma?: Yes/No Default: Yes It plots a 200 period fast (green) and 225 period slow (red) sma . I usually use two MAs. Its visually very easy to understand. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample Strategy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - You can develop your own strategy with the channels. But following is just one of the ways you can trade. Best Application: Ranging markets. But can be happily used in volatile conditions, with a little experience. 1. SMA: -- (this condition is optional really) If green (200) is above red (225) go only long. If red is above green go only short. Defines long term trend of the market. 2. Channel slope: -- (this stuff needs practice/experience) Depending on the channel slope, like if its tending to go up or down, you can choose to take only short or long trades. It defines short term momentum of the market. 3. ATR based heights: Since its ATR based, the channel height are our natural entry and exit points. Long: When price touches lower shaded area, consider possible long entry. Exit on price entering the upper shaded area. Short: Enter on upper bound shaded area, exit on lower. 4. RSI: For additional conformations. Again note, the RSI considers the lower bound of channel as 0 and upper as 100. But since, the channel moves up and down, the RSI will also move not only as RSI but also with the channel. Meaning, say if the RSI is valued at 50, then it will be near the center of the channel but since the center changes as time and price changes, the RSI valued at 50 at different times will not be at the same horizontal level respect to the graph, although it will be at the same level (center) respect to the channel. 5. PRC Channel Percentage label: This label is at the lower side a bit ahead of the current candle. Provides you info on what is the channel percentage. This is especially helpful in crypto markets to gauge your possible percentage profit where profits can be much higher than forex or other instruments. It can also helps you select a suitable market/instrument if the channels are based on ATR. 6. Extra indicators: I usually use stochastic along with this setup for extra conformations. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Use freely and donate generously if you find value. Your help will really help. I had earlier provided BTC addresses for donations but it seems to violate TV House rules. Hope they make TV coins redeemable in future. - Pranav Joshi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Extra Info - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - // © cpranavjoshi // special thanks to the "Trading View" people for providing this great platform for free // ------------------------ // MATH // ------------------------ // special thanks to an article on the web that provided layman friendly explanation of the maths // unfortunately i wont be able to provide the link to that article owing to TV restrictions, though i sincerely would have liked to credit the author. // Google search this phrase, and you should be able to get it in one of the first results - "polynomialregression Mathematics of Polynomial Regression" // my regression math calculation is a further resolution upon the generalized matrix formula given in the that article. // the generalized matrix looks scary but in fact its much simpler than one may assume // the summation sign things are just float numbers that can be easily found out // so we get a matrix with number of equations equal to the number of unknowns. // e.g. if its a 3rd degree poly, it has 4 unknowns (c0,c1,c2,c3) with 4 equations as in the generalized matrix // it can be resolved by simple algebra // Note: the results have been verified with excel using same input data points. // pine was difficult for me so i coded it in python first to verify // ------------------------ // WHY // ------------------------ // this script was coded because Pranav badly needed Polynomial channels (had used them in mt4 earlier) // and at the time of this coding, i could not find any readily available script in the trading view public library ( tnx public) // the complex math was probably the hurdle // i m not good in maths, but by the Will of the Lord, i could resolve the issue with simple algebra and logic // ------------------------ // PINE // ------------------------ // i am just an average (even poor probably) programmer and pine script is not my language // this is a humble attempt to write my first pine with whatever i could do quickly // experts - feel free to develop if needed. have used some workarounds in drawings/plottings. rectify them if possible // // // - Pranav Joshi
Pine Script® göstergesi
cpranavjoshi tarafından
2
[NLX-L2] Fisher Stochastic Center of Gravity (v4)- Fisher Stochastic Center of Gravity- This is Fisher's Stochastic Center of Gravity converted to pine v4 by blackcat. A very powerful entry indicator! The original was published by DasanC & EmpiricalFX and it's a very interesting take on FSCG. All the credit for the indicator goes to the authors and inventor of FSCG, this is just a mod to be used with my NLX Modular Trading Framework . - How to Use - 1. Add a Trend Indicator like Trend Index MTF to your chart 2. Add " Fisher Stochastic Center of Gravity" Indicator to your Chart and select the Trend Index MTF with Type L1 in the Settings as Source 2. Add the Backtest to your Chart and select the FSCG Signal with Type L2 as Source - Alerts for Automated Trading - See my signature below for more information. Contact me for the Alert module.
Pine Script® göstergesi
nilux tarafından
Profit Maximizer StrategyFirst I would like to thank to @KivancOzbilgic for developing this indicator. All the credit goes to him. I just created a strategy, in order to try to find the perfect parameters, timeframe and currency for it. I will provide below the same description like he has in the publish of profit maximizer Profit Maximizer - PMax combines the powerful sides of MOST (Moving Average Trend Changer) and SuperTrend (ATR price detection) in one indicator. Backtest and optimization results of PMax are far better when compared to its ancestors MOST and SuperTrend. It reduces the number of false signals in sideways and give more reliable trade signals. PMax is easy to determine the trend and can be used in any type of markets and instruments. It does not repaint. The first parameter in the PMax indicator set by the three parameters is the period/length of ATR. The second Parameter is the Multiplier of ATR which would be useful to set the value of distance from the built in Moving Average. I personally think the most important parameter is the Moving Average Length and type. PMax will be much sensitive to trend movements if Moving Average Length is smaller. And vice versa, will be less sensitive when it is longer. As the period increases it will become less sensitive to little trends and price actions. In this way, your choice of period, will be closely related to which of the sort of trends you are interested in. We are under the effect of the uptrend in cases where the Moving Average is above PMax; conversely under the influence of a downward trend, when the Moving Average is below PMax. Built in Moving Average type defaultly set as EMA but users can choose from 8 different Moving Average types like: SMA : Simple Moving Average EMA : Exponential Movin Average WMA : Weighted Moving Average TMA : Triangular Moving Average VAR : Variable Index Dynamic Moving Average aka VIDYA WWMA : Welles Wilder's Moving Average ZLEMA : Zero Lag Exponential Moving Average TSF : True Strength Force Tip: In sideways VAR would be a good choice You can use PMax default alarms and Buy Sell signals like: 1- BUY when Moving Average crosses above PMax SELL when Moving Average crosses under PMax 2- BUY when prices jumps over PMax line. SELL when prices go under PMax line.
Pine Script® stratejisi
SoftKill21 tarafından
16
PIVOT differenceall credit to pine coders of TV- www.tradingview.com this is just example of the new function and how we can make smart pivot system for low TF on the right side (the normal pivot that we use S1 and R1 level shown) the lines represent the trend of the pivot and there levels here i use 30 min pivot MTF on 5 min chart in this example we can see that we have much more correct way to estimate break up or down the get price function allow you to make alerts of crossing of the trend line ( I am lazy now so maybe later I add it:) ) you can use same TF as the chart or higher and then examine where you think you nned to buy and sell I normaly add linear regression or other method of choice for conformation of buy or sell oppertunity this is just raw idea but this function can be exploited with any trend line or system that one can think about this is just example to think on :)
Pine Script® göstergesi
RafaelZioni tarafından
4