Şimdi başlat

Komut dosyalarını "市值60亿的股票" için ara

Volume Profile Free Ultra SLI (100 Levels Value Area VWAP) - RRBVolume Profile Free Ultra SLI by RagingRocketBull 2019 Version 1.0 This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 100 horizontal bars. This is basically the MAX SLI version with +50 more Pinescript v4 line objects added as levels. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free Ultra SLI, Free History. This is the Free Ultra SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free Ultra SLI: 100 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 300 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 100 levels (line implementation) - 2x SLI modes for even higher res: 300 levels with 3x vertical SLI, 100 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels, Transparency for buy/sell levels WARNING: - Compilation Time: 1 min 20 sec Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz Buy/Sell SLI mode with 100 or Vertical SLI with 300 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 100 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 300 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range and may be inaccurate. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work (you can have a mixed mode: 2nd instance - auto, 3rd - manual) Notes: - This code uses Pinescript v3 compatibility framework - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 4-5 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - 100 levels consist of 50 main plot levels and 50 line objects used as alternate levels, differences are: - line objects are always shown on top of other objects, such as plot levels, zero line and side cover, it's not possible to cover/move them below. - all line objects have variable lengths, use actual x,y coords and don't need side cover, while all plot levels have a fixed length of 100 bars, use offset and require cover. - all key properties of line objects, such as x,y coords, color can be modified, objects can be moved/deleted, while this is not possible for static plot levels. - large width values cause line objects to expand only up/down from center while their length remains the same and stays within the level's start/end points similar to an area style. - large width values make plot levels expand in all directions (both h/v), beyond level start/end points, sometimes overlapping zero line, making them an inaccurate % length representation, as opposed to line objects/plot levels with area style. - large width values translate into different widths on screen for line objects and plot levels. - you can't compensate for this unwanted horiz width expansion of plot levels because width uses its own units, that don't translate into bars/pixels. - line objects are visible only when num_levels > 50, plot levels are used otherwise - Since line objects are lines, plot levels also use style line because other style implementations will break the symmetry/spacing between levels. - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - You can change level transparency of line objects. Due to Pinescript limitations, only discrete values are supported. - Inverse transp correlation creates the necessary illusion of "covered" line objects, although they are shown on top of the cover all the time - If custom lines_transp is set the illusion will break because transp range can't be skewed easily (i.e. transp 0..100 is always mapped to 100..0 and can't be mapped to 50..0) - transparency can applied to lines dynamically but nva top zone can't be completely removed because plot/mixed type of levels are still used when num_levels < 50 and require cover - transparency can't be applied to plot levels dynamically from script this can be done only once from UI, and you can't change plot color for the past length bars - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - Range selection/Anchoring is not accurate on charts with time gaps since you can only anchor from a point in the future and measure distance in time periods, not actual bars, and there's no way of knowing the number of future gaps in advance. - Adjust Width for Log Scale mode now also works on high precision charts with small prices (i.e. 0.00001) - in Adjust Width for Log Scale mode Level1 width extremes can be capped using max deviation (when level1 = 0, shift = 0 width becomes infinite) - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. I am your grandfather, Luke! Now, join the Dark Side in your father's steps or be destroyed! Once more the Sith will rule the Galaxy, and we shall have peace...
Pine Script® göstergesi
RagingRocketBull tarafından
111
Volume Profile Free MAX SLI (50 Levels Value Area VWAP) by RRBVolume Profile Free MAX SLI by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free MAX SLI versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 50 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free History. This is the Free MAX SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 50 levels (3 implementations) - 20-30x faster than the old Pro versions especially on lower tfs with long history - 2x SLI modes for even higher res: 150 levels with 3x vertical SLI, 50 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz SLI mode for 50 Buy/Sell or Vertical SLI for 150 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: - use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 50 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 150 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work Notes: - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 2-3 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - hist_base for levels still results is ugly redraw - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only plot transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. Gravitonium Levels Are Increasing. Unobtainium is nowhere to be found! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
Pine Script® göstergesi
RagingRocketBull tarafından
25
Sexy RSI for sexy tradersHello fellow sexy traders. I was tired of constantly having to add my own horizontals/MAs to the default RSI so I decided to make this modification. The default settings include channels from 40-80 (green horizontals) for a bullish range, and 20-60 (red horizontals) for the bearish range. Also includes white line at 50 level, and blue horizontals at extremes (90 and 10). If RSI stays in one of the red or green range that can signify the trend direction, as directed by Andrew Cardwell (inventor of the RSI). If you wish for other levels to be included, just let me know! Comment on here or dm me on twitter @boss_charts and I can add the settings for you, so all you have to do is click a button and it will set it to your desired config. I want this to be a tool that is useful for heavy traders to save them time. Additionally, in order to tell the level of the RSI and how overextended it might be, I added the setting for the RSI to change color depending on its level. Current settings are as follows: Normal RSI (30-70) = PURPLE Conventional Overbought/Oversold (30-20 + 70-80) = RED 1st extended (20-15 + 80-85) = PINK 2nd extended (15-10 + 85-90) = ORANGE VERY EXTENDED (<10 + >90) = YELLOW That way you can get an idea of how drastic a move is by the color alone. According to Dr. Cardwell, a drastic move to over/under extended can be a sign of strength. Finally, there are the default MAs added that Mr. Cardwell defines as useful for defining the trend. These being the 9 MA and 45 EMA/WMA. The strategy with these is to have the MAs on both price and RSI. If the 9MA is above the 45 MA on both price and RSI, then this is bullish and you can look for longs. Conversely, if the 9 is below the 45 on both RSI and price that is bearish, and you can look for shorts. I added the background color change for the points where the MAs cross each other, so you do not have to have the MAs fogging up your charts to know where they are relative to one another. This is similar to my MA cross indicator which contains the same functionality. Never financial advice. Backtest it for yourself and find MA configurations that work for you. Enjoy! Feel free to send feedback/requests whenever.
Pine Script® göstergesi
number_juan tarafından
Trend Monster HeadquartersADX-DMI enhanced & modified for faster reaction ADX (black line) above 80 = mega-trend peaked, reversal imminent, rare case scenario ADX (black line) above 60 = trend topping out, reversal possible, depending on other indicators ADX (black line) above 25 threshold = trend strenghening DMI- (red line) - above 25 - bear trend strenghening DMI+ (green line) - above 25 - bull trend strenghening DMI- (red line) - coming off the bottom - bull trend weakening DMI+ (green line) - coming off the bottom - bear trend weakening
Pine Script® göstergesi
iam516 tarafından
200/150 This a variation to my 120/60 Trend Model for the daily chart on Bitcoin, which has quite reliably been determining the over all trend as well as low risk entries within a longer term trend. It's a combination of 150 & 220 SMA, used on the 1D chart. Once price closes below both SMAs trend is an early bearish signal, while the SMAs flipping to red is later but more reliable bearish signal. For bullish trend it is the same thing just the opposite. Once the "cloud" switches red trend is bearish while once it switches green it's bullish. Bitcoin tends to get rejected by the cloud during bullish and bearish trends. Once Bitcoin pushes through the cloud the trend will typically reverse. Bitcoin trading within or close to the cloud is generally a good long or short entries, depending on the color of the cloud (red: short & green: long).
Pine Script® göstergesi
swenlink tarafından
1
Armando Bitmex Liquidation LevelsHi Guys! - This script show you liquidations levels with leverage of 100X, 50X, 25X & 10X (shorts & longs). - This indicator "only" works for XBT on Bitmex. - Other indicators only show the liquidations up to 25X. - You need to set the time frame according to your graph. e.g. 1, 60, 240, D, 3D, W, etc. - The idea of this indicator is to help the user to determine those levels where Bitmex hunt liquidity. Best Regards. Armando M.
Pine Script® göstergesi
ArmandoElCriptoMundo tarafından
8
Fibo Guppy Multi MA RevisedThis is Guppy MA i customized for myself based on two scripts of GMMA from JustUncleL and NeoButane. Its features are: 1. Besides standard EMA you can chose all kinds of exotic moving average types ike ALMA (my favorite), HullMA, ZeroLag EMA, VWMA, KAMA etc... 2. Two types of coloring scheme - depends on volatility try one that's best fit. 3. Multiple sets of predefined lengths: standard Guppy 3-60, Fibonacci based lengths 3-610, Fibo 5-987 and Custom (user defined lengths)
Pine Script® göstergesi
Spiralman tarafından
Volume Profile: Intra-bar VolumeThis indicator was developed as part of a free blog post tutorial on the Backtest-Rookies website for detailed code commentary, head over there. Scope The indicator shall attempt to do the following: Look at a lower time-frame. E.g 5 minutes when on a 1-hour chart. Create a function to loop through through candles and make an assessment. If the candle it closed up, the volume will be categorized as buying volume. Conversely, if it closed down, the volume will be categorized as selling volume The function will then be passed to the security() function to run on a lower timeframe. All buying volume and selling volume from the lower time-frame shall be summed and displayed on the main chart. Important Note This indicator will not give you genuine buying or selling volume. It simply follows the assumption that if price closed up, there must have been more buyers than sellers and if it closed down we assume the opposite. Usage In order to use this indicator, users will need to calculate how many lower time-frame bars are contained in the time-frame on the main chart. So for example, the default settings are configured for the indicator to be run on the 1H chart. As a result, we need to set the "Bars on Lower Timeframe" input to 12. This is because there are 12 x 5-minute bars in 60 minutes.
Pine Script® göstergesi
BacktestRookies tarafından
11
Triple Kijun Trend by SpiralmanIspired from "Oscars Simple Trend Ichimoku Kijun-sen" by CapnOscar Script displays 3 kijun lines: one for current TF, second one emulates it for TF 4 times higher, third one for x16. For example on 1H chart there will be 3 kijuns: one for 1H, second one for 4H (emulated), third one for 16H (emulated). Kijuns change colors based on their position relative to price. Kijun Sen The base line, the slower EMA derivative, and a dynamic representation of the mean. With that said, the Kijun serves as both critical support and resistance levels for price. How does it work, and why would the Kijun be superior to commonly used moving average indicators? Fun fact: The Kijun dynamically equalizes itself to be the 50% retracement (or 0.5 Fibonacci level) of price for any given swing, and price will ALWAYS gravitate to the Kijun at some point regardless of how far above or below it is from it. By taking the median of price extremes, the Kijun accounts for volatility that other MAs or EMAs do not. A flat horizontal Kijun means that price extremes have not changed, and that the current trend losing momentum. Crypto-adjusted calculation: (highest high + lowest low) / 2 calculated over the last 60 periods.
Pine Script® göstergesi
Spiralman tarafından
2
red-sell green-buyThis indicator is hybrid of some indicator with some modification The system is very simple (red sell, green buy ) you can use ATR system , part of price system or traditional system . and for each time frame that you use set the TF =tf to same time frame or higher then the frame that you use Its has many nice functions but in basic it show you the up trend of the bears compare to the bulls This is example on same tf with part of price method here example of using TF 240 over 60 min
Pine Script® göstergesi
RafaelZioni tarafından
5
Zindarra Multi Alerts Advanced (8 Symbols, 8 Levels) by RRBZindarra Multi Alerts Advanced by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for several assets. Zindarra Multi Alerts Advanced supports 8 symbols with 8 custom alert levels. You can have an M:M relationship betweeen symbols and levels, for example: - 4 symbols each boxed by 2 alerts above/below the price - 3 symbols with 1 alert each - 2 symbols, 1st with 2 alerts, 2nd - with 6 alerts - 1 symbol with 8 alerts etc There are several versions: Simple, Pro, Advanced and Ultimate. This is the Advanced version. The Differences are listed below. - Simple: 10 Alert Levels, 1 plot mode, alert type: cross, no colors/triggered alerts - Pro: 9 Alert Levels, 2 plot modes: plot/price line, alert type: cross, +change/swap colors, +hide/disable triggered alerts, 2 penetration modes (close, high/low), trigger on confirmed close - Advanced: 8 Symbols/Tickers, 8 Alert Levels, +alert types: cross up/cross down, no color change. Display sources as lines/candles, normalize, scale/shift independently - Ultimate: 5 Symbols/Tickers, 8 Alert Levels, +alert types: volume/price %/abs change, volume/ema/time cross Features: - 8 custom symbols, symbols:levels = M:M - 8 custom alert levels with labels. For each alert there must be a corresponding non-empty symbol (can be a duplicate) - alert types: cross/cross up/cross down - normalize symbols (and alert levels) to 100% to compare, - scale and shift each symbol (and alert levels) to position on a chart independently - 1 alert levels plot mode: plot - 2 symbol types: line/candles - colorize symbol candles - high/low or close level penetration modes - show/hide levels/labels - keep or auto disable triggered alerts - trigger alerts only after a confirmed close You will see all symbols on a single chart at the same time with their corresponding alert levels. From this chart you can manage all alerts configured for multiple assets. Although TradingView has 2 percentage scale modes (Percent, Indexed to 100), somehow they still fail to be usefull when comparing multiple assets. This indicator lets you normalize all symbols to 100% making a direct single scale comparison between assets with vastly different price levels possible. All alert levels will be normalized as well. TradingView does not let you move the plots attached to left scale. When scaled they all remain stuck in the center and can't be moved vertically or relative to each other. This indicator lets you position all symbols independently using individual scale and shift settings. For example, you can: - split your screen in 3 horiz areas and have a symbol in each of them without overlapping or - have several partially overlapping assets with different scale each or - have all assets fully overlapping and normalized to the same 100% scale You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI. Any changes will also reset already triggered levels visibility. 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see triggered alert levels hiding/changing colors but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar or across several symbols at the same time. However all of these levels will hide in the indicator as expected. - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - For source=high/low a directional level penetration is used automatically (crossunder/low and crossover/high). For source=close a standard bidirectional cross is used unless another alert type is specified. - normalization breaks/distorts alert levels and symbol price - this is normal and is expected. To view the real price of alert levels uncheck normalize - the first 8 outputs are alert levels. Unnormalized levels are straight lines. - you will see alerts from all symbols in the system alert message box of the current symbol - a bit confusing, but there's no workaround, you can't have a customized alert message for each symbol/level - many tickers as arguments can stretch/break TradingView's Create New Alert dialog but it's still possible to push all required buttons and Save. - duplicate symbols will be displayed by default. You can manually hide duplicates using show/hide flags. - empty tickers (and corresponding alerts) are essentially disabled 1. uses plot*, cross*, barssince, highest, security, alertcondition
Pine Script® göstergesi
RagingRocketBull tarafından
10
Zindarra Multi Alerts by RRBZindarra Multi Alerts by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for an asset. Zindarra Multi Alerts supports 10 custom alert levels. You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. This is the Zindarra Multi Alerts Simple version. You can't auto disable already triggered alerts in this indicator. All alerts will remain active. If you want to be able to hide/disable/change color of the triggered alert levels use the Zindarra Multi Alerts Pro version. Features: - 10 custom alert levels with labels - set open/high/low/close source point for level penetration - show/hide levels/labels Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see only the alert levels but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar. - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - a standard bidirectional cross is used for all penetration sources 1. uses plot*, cross*, alertcondition
Pine Script® göstergesi
RagingRocketBull tarafından
2
Zindarra Multi Alerts Pro (9 Levels) by RRBZindarra Multi Alerts Pro by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for an asset. Zindarra Multi Alerts Pro supports 9 custom alert levels. You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. If you want 10 alert levels and don't need colors and Pro features - use Multi Alerts Simple version instead. Features: - 9 custom alert levels with labels - 2 plot modes: plot and price line - high/low or close level penetration modes - show/hide levels/labels - change color based on level position above/below price - keep or auto disable triggered alerts - trigger alerts only after a confirmed close - swap level colors Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI. Any changes will also reset already triggered level colors/visibility. 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see triggered alert levels hiding/changing colors but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar. However all of these levels will hide/change color in the indicator as expected. - plot modes: price line - changes color of the whole level, style is not configurable; plot - changes color of a level's segment after each cross, configurable style - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - For source=high/low a directional level penetration is used automatically (crossunder/low and crossover/high). For source=close a standard bidirectional cross is used. Colors always change above/below close. 1. uses plot*, cross*, alertcondition
Pine Script® göstergesi
RagingRocketBull tarafından
5