Şimdi başlat

Multitimeframe

Breakout Range Signal with Quality Analysis [Dova Lazarus]📌 Breakout Range Signal with Quality Analysis 🎓 Training-focused indicator for breakout logic, SL & TP behavior and signal quality assessment 🔷 PURPOSE This tool identifies breakout candles from a calculated channel range and visually simulates entries, stop losses, and take profits, providing live and historical performance metrics. ⚙️ MAIN SETTINGS 1️⃣ Channel Setup channel_length = 10 → how many candles are averaged to form channel boundaries channel_multiplier = 0.0 → adds expansion above/below the base channel channel_smoothing_type = SMA → smoothing method for high/low averaging 📊 The channel consists of two moving averages: one from highs, the other from lows. When expanded (via multiplier), it creates a buffer range for breakout validation. 2️⃣ Signal Detection Body > Channel % = 50 → a breakout candle's body must exceed 150% of the channel width Signal Mode:  • Weak → every valid breakout candle is highlighted  • Strong → only the first signal in a sequence is shown (helps reduce noise) 🟦 Bullish signals (blue):  • Candle opens inside the channel  • Closes above the channel  • Body is large enough  • Optional: confirms with trend (if enabled) 🟨 Bearish signals (yellow):  • Candle opens inside the channel  • Closes below the channel  • Body is large enough  • Optional: confirms with trend 3️⃣ Trend Filter (optional) Enabled via checkbox Uses a higher timeframe MA to filter signals Bullish signals are allowed only if price is below the trend MA Bearish signals only if price is above it ⏱️ trend_timeframe = 1D (typically set higher than the chart's timeframe) 🟢 Trend line is plotted if enabled 🎯 ENTRY, STOP LOSS & TAKE PROFIT LOGIC SL and TP are based on channel width, not fixed pip/tick size: 📍 Entry Price = close of the breakout candle 🛑 Stop Loss:  • Bullish → below the lower channel border (minus offset)  • Bearish → above the upper channel border (plus offset) 🎯 Take Profit:  • Bullish → entry + channel width × profit multiplier  • Bearish → entry − channel width × profit multiplier You can control: Profit Target Multiplier (e.g., 1.0 → TP = 1×channel width) Stop Loss Target Multiplier (e.g., 0.5 → SL = 0.5×channel width) Signals to Show = how many historical SL/TP setups to display 📈 Lines and labels ("TP", "SL") are drawn on the chart for clarity. 🧪 QUALITY ANALYSIS MODULE If enabled, the indicator will: Track each new signal (entry, SL, TP) Analyze outcomes:  • Win = TP hit before SL  • Loss = SL hit before TP  • Expired = signal unresolved after N bars Display statistics in a table (top-right corner): 📋 Table fields: ✅ Overall win rate 📈 Bullish win rate 📉 Bearish win rate 🔢 Total signals 🕓 Pending (still active trades) Maximum bars to wait for outcome is customizable (max_bars_to_analyze). 📐 VISUALIZATION TOOLS TP / SL lines per signal Labels “TP” and “SL” Optional channel lines and trendline for better context Colored bars for valid signals (blue/yellow) 📌 BEST USE CASES Understand how breakout signals are formed Learn SL/TP logic based on dynamic range Test how volatility affects trade outcomes Use as a visual simulation of trade behavior over time
Pine Script® göstergesi
DovaLazarus tarafından
EMA+ATR Band MTF Trend EntryThis is a Multi-Timeframe Trend Trading indicator strategy adapted from Sahil Rohmehtra’s Mentorship programme. The trading decision is made by first accessing the trend in higher timeframe (say Monthly) by using TWO EMAs. If the faster EMA (say 20 period) is above Slower EMA (say 50 period) and the price is above slower EMA then the trend is suitable for buyers. Similarly if faster EMA is below slow EMA and the price is below that then trend is suitable for sellers. Once we access the trend in the higher timeframe we move to the lower timeframe (say Weekly) and access the 5-period RSI value. If RSI is below 30 then we can prepare for possible buy entry in lower (Daily) timeframe if entry conditions are met in daily timeframe. Similarly sell bias can be initiated when the higher timeframe EMA trend is down, daily RSI is above 70 and sell entry condition is met in daily timeframe. The RSI thresholds can be changed by the user. Once we identified the RSI bias then wait for the confirmation candle in the lower timeframe (say 1 hour). In the entry timeframe we plot a band of 20 EMA of LOWs ± 1 ATR lines. Here,we wait for a candle to close above the 20 EMA of LOWs + 1 ATR for a buy signal with an increase in On Balance Volume (OBV) value. Similarly for sell signal we should get a candle close below the 20 EMA of LOWs - 1 ATR with corresponding change in OBV. This candle is the signal candle. Once we get a Buy or Sell signal the corresponding stop loss is the nearest LOW - 1 ATR or HIGH + 1 ATR. The ATR scaling may be changed by the user. Now if another candle closes above the high of the buy signal candle then enter on buy. If the low of the buy signal candle is broken then it is a potential short-term sell entry. Similarly if another candle closes below the sell signal candle then enter short and if there is a close above high of the signal candle then it is a potential buy entry.
Pine Script® göstergesi
librantrader tarafından
Pi Cycle | AlchimistOfCryptoPi Cycle Top Indicator - A Powerful Market Phase Detector Developed by AlchimistOfCrypto 🧪 The Pi Cycle uses mathematical harmony to identify Bitcoin market cycle tops with remarkable precision. Just as elements react at specific temperatures, Bitcoin price behaves predictably when these two moving averages converge! 🧬 ⚗️ The formula measures when the 111-day SMA crosses below the 350-day SMA × 2, creating a perfect alchemical reaction that has successfully identified the major cycle tops in 2013, 2017, and 2021. 🔬 Like the Golden Ratio in nature, this indicator reveals the hidden mathematical structure within Bitcoin's chaotic price movements. 🧮 When the reaction occurs, prepare for molecular breakdown! 🔥
Pine Script® göstergesi
AlchimistOfCrypto tarafından
3
Breakout + Retest StrategyThe Breakout + Retest Strategy is a proven price action approach used by professional traders to catch high-probability market moves after key levels are broken. This strategy aims to enter the market after confirmation — reducing false breakouts and improving entry accuracy. 🔍 Strategy Logic: Identify a Key Support or Resistance Level These could be recent swing highs/lows, consolidation zones, or session highs. Wait for a Clean Breakout Price must decisively break above resistance or below support with strong momentum. Watch for the Retest After the breakout, wait for the price to pull back to the broken level (now flipped support/resistance). Enter on Retest Confirmation Look for signs like rejection wicks, bullish/bearish engulfing candles, or strong volume on the retest. Set Risk-Managed Stops and Targets Stop loss goes below (for long) or above (for short) the retested level. Target is usually set at a 1:2 or higher risk-to-reward ratio, or based on structure. ✅ Why It Works: Filters out fake breakouts Uses market structure and liquidity traps to your advantage Combines both momentum and confirmation ⚙️ Best Timeframes: 15-minute to 1-hour for intraday setups 4-hour and daily for swing trades 📊 Ideal for: Futures (NQ, ES, Gold) Forex pairs Crypto Stocks near key earnings or breakout zones
Pine Script® göstergesi
aaroncaine535 tarafından
SMAs Ghost in the Machine v3SMAs Ghost in the Machine v3 Created by: MecarderoAurum Overview The "SMAs Ghost in the Machine" is a powerful multi-timeframe analysis tool designed for traders who want to align their entries and exits with the trend on several different chart periods simultaneously. At its core, the indicator plots the 9-period and 20-period Simple Moving Averages (SMAs) from up to three user-defined timeframes directly onto your active chart. Its most powerful feature is the Combined Crossover Signal, which allows you to create highly specific, custom trading setups by defining conditions that must occur at the same time across any of the enabled timeframes. This eliminates guesswork and helps you visually confirm when your precise market conditions are met. Important Note on Line Drawing This indicator allows you to see trends of other timeframes. A specific design choice was made not to smooth the moving average lines. This is to ensure that the crossover signals appear on the exact candle where the cross occurs in real-time. Smoothing the lines can cause a delay and shift the signal to a later candle. The side effect of this accuracy is that the lines will appear "stepped." As new data comes in on your current chart, you may need to refresh the chart to keep the higher timeframe lines updated. We are working on a solution to this. Capabilities Multi-Timeframe Analysis: Plot the 9 and 20 SMAs from three different timeframes (e.g., 1-minute, 5-minute, and 30-minute) on a single chart. Individual Crossover Signals: Automatically plots a green triangle (▲) for a "Golden Cross" (9 SMA crosses above 20) and a red triangle (▼) for a "Death Cross" (9 SMA crosses below 20) on each individual timeframe. Combined Crossover Engine: Define a custom bullish or bearish signal by combining multiple events. The indicator will plot a green diamond (◆) for your bullish setup and a red diamond (◆) for your bearish setup when all specified conditions are met on the same candle. Customizable Alerts: Create alerts for both the individual 9/20 SMA crosses and your custom Combined Crossover Signal to ensure you never miss a potential setup. How to Use the Indicator Basic Setup Add the "SMAs Ghost in the Machine v3" indicator to your TradingView chart. Open the indicator settings. Under the Timeframe Settings, enable the timeframes you want to monitor and select the desired period for each (e.g., TF1: '1', TF2: '5', TF3: '30'). Configuring the Combined Crossover Signal This is the core feature for defining your specific trading setups. In the settings, go to the "Combined Crossover Signal" group and check the box to "Enable Combined Signal." Decide if you are building a bullish (long) or bearish (short) setup. Under the "Bullish Setup" or "Bearish Setup" sections, check the boxes for every event that must happen at the same time for your signal to trigger. Example Bullish Setup: Let's say your strategy is to go long when: On the 1-minute chart (TF1), the price crosses above the 9 SMA. AND, on the 5-minute chart (TF3), the price also crosses above its 9 SMA. To configure this, you would check the following two boxes under the "Bullish Setup": TF1: Price crosses above 9 SMA TF3: Price crosses above 9 SMA Now, a green diamond (◆) will only appear on your chart when both of those conditions are true on the exact same bar, giving you a precise entry signal. Setting Up Alerts Go to the "Alert Settings" tab in the indicator options. Check the boxes for the alerts you want to enable (e.g., "Alert on TF1 SMA Cross," "Alert on Combined Signal"). Close the settings. Now, right-click on the chart and choose "Add alert." In the "Condition" dropdown, select "SMA Ghosts v3." A second dropdown will appear. Choose the specific event you want an alert for, such as Combined Bullish Signal or TF1 Golden Cross. Configure the alert options as desired and click "Create." Trading Strategies Trend Confirmation: Use the indicator on a 1-minute chart with the 5-minute 9/20 SMA lines enabled to see the 5-minute trend. Only take 1-minute trades that are in the same direction as the 5-minute SMAs. Multi-Flow Alignment: Keep track of bigger timeframes (like the 30-min or 4-hour) to also match your entries with longer-term market flows. Avoid Flat Markets: Avoid taking trades when the SMA lines from multiple timeframes are flat or moving sideways, as this indicates a lack of clear trend.
Pine Script® göstergesi
MercaderoAurum tarafından
1
🔁 A.X.I.S Fibonacci Engine V2 – Smart Projected Pathway🔁 A.X.I.S Fibonacci Engine V2 – Smart Projected Pathway indicator The A.X.I.S Fibonacci Engine V2 is a next-generation Fibonacci projection tool designed for traders seeking advanced, adaptive levels that respond to true multi-timeframe market structure. Built from the ground up for active traders—scalpers, swing traders, and position players—it fuses traditional Fibonacci logic with dynamic price projection and smart anchor logic. How It Works: Multi-Timeframe Anchoring: Anchors your Fibonacci levels to High Timeframe (HTF) pivots for powerful bias and “macro” market structure, while also utilizing Low Timeframe (LTF) swing detection for precise “micro” projection and pathway analysis. Dynamic Pathway Projection: Beyond static lines, this engine allows Fibonacci levels to be projected forward, following the price path between significant swings—giving you projected targets and active “pathways” instead of just fixed retracement bands. Trend-Adaptive Logic: Determines bullish/bearish bias based on where HTF price closes relative to a moving average (HTF EMA-20), meaning the plotted fibs automatically adjust to uptrends or downtrends. No need to guess direction. Auto-Cleanup & Smart Management: Old lines and labels are deleted automatically to keep your chart clean, and levels are recalculated with every new significant swing (“leg”)—no manual intervention needed. Key Features: Multi-Timeframe Input: Choose both HTF (for “anchor” pivots) and LTF (for “projection” pivots) independently. Fine-tune swing sensitivity for both anchors and pathway pivots. Classic + Projected Mode: Choose between standard horizontal Fibs or enable Dynamic Pathway Mode to project levels diagonally into future bars, creating “fib pathways.” Color Customization: Individualize bullish/bearish fib colors, line style (solid, dashed, dotted), thickness, label position, and transparency. Special “golden zone” highlighting for the most critical levels (0.618/0.786). Visual Anchors: Optionally plot markers for HTF swing pivots for extra clarity. Chart Cleanliness: Script manages and deletes its own objects—no more chart clutter! Real-Time Auto-Update: All levels and pathways update in real time as market structure changes. User-Friendly Labels: Toggle on/off fib level labels, with position and background adjustments. Practical Trading Applications: Swing/Position Trading: Use HTF pivots for macro context, then project LTF fibs into the future for potential reversal/extension targets. Scalping: Deploy on lower timeframes with micro pivots for intraday levels and short-term projected moves. Dynamic Take-Profit & Entry Zones: Identify evolving TP and re-entry zones as price carves out new swings, even in choppy or trending conditions. Trend Confirmation: Let the engine determine trend direction, so your fibs are always aligned with prevailing momentum. How to Use: Add to Chart: Apply the indicator to any chart or timeframe. Set Your Anchors: Pick the HTF (anchor) and LTF (projection) timeframes. Adjust swing sensitivity (lookback) as needed. Enable/Disable Dynamic Pathway: For regular fibs, leave off. For projected “pathways,” turn it ON—lines will project forward along the likely path of the next move. Adjust Colors, Labels, and Styles: Fine-tune everything for clarity and your personal style. Watch for Changes: As new pivots form, the script will update levels in real time, keeping your roadmap fresh. (Optional) Show Macro Swings: Toggle on/off to plot markers for the most recent HTF pivots. Who Is It For? Day traders, scalpers, and swing traders wanting true projected price targets—not just static fibs. Traders tired of redrawing fibs after every new swing. Anyone who wants a clean, dynamic, and truly adaptive fib tool that blends macro and micro market structure into one engine. What Makes It Different? True multi-timeframe awareness: Adapts to both macro (HTF) and micro (LTF) structure. Automatic trend recognition: Fibs align with price action—no manual flipping. Projected, not just static: See where fib levels could land, not just where they were. Cleanest chart management: Deletes its own lines and labels on every update—no mess, ever. Note: This tool is for educational and informational purposes only. Not financial advice. Always use proper risk management! Any issues or feature requests? Drop a comment below or reach out! Happy trading and welcome to the A.X.I.S revolution. — I5X-Albatross
Pine Script® göstergesi
I5X-Albatross tarafından
Engulfing DashboardThis is an indicator that detects candles based on the **Engulfing system** I’ve studied from **wick to wick**. It determines whether it’s a Buy or Sell based on the **opening price** and how the candle moves. Anyone familiar with the Engulfing system will know how to use it. It’s especially useful for people who use only **one screen** and can’t constantly monitor multiple timeframes. And don’t forget: **Trend is your friend.**
Pine Script® göstergesi
Idealadvantage tarafından
IFVG ExtendedThis indicator identifies and visualizes "Imbalance Fair Value Gaps" (IFVGs) on a price chart. It highlights these gaps, tracks their evolution, and signals when they are "filled" or "invalidated" by price action. The script is quite advanced, using custom types, arrays, and dynamic drawing. 1. Types and Variables Custom Types: lab: Stores label information (x, y, direction). fvg: Stores Fair Value Gap data, including its boundaries, direction, state, labels, and other properties. Arrays: Four arrays track bullish and bearish FVGs, and their "invalidated" (filled) versions. Signals: Boolean variables to store if a bullish or bearish signal is triggered. 2. User Inputs and Parameters Display Settings: How many recent FVGs to show, signal preference (close or wick), ATR multiplier for gap size filtering, and colors for bullish/bearish/midline. 3. Chart Data Price Data: Open, high, low, close, and ATR (Average True Range) are stored for use in calculations. 4. Functions label_maker: Draws an up or down arrow label at a given point, colored for bullish or bearish. fvg_manage: Checks if any FVGs in the array have been "invalidated" (i.e., price has crossed their boundary). If so, moves them to the invalidated array. inv_manage: Manages invalidated FVGs, checking if a signal should be fired (i.e., price has reacted to the gap). Also removes old FVGs. send_it: Draws the FVGs and their labels on the chart, using boxes and lines for visualization. 5. Main Logic and Visualization FVG Detection: On each bar, checks for new bullish or bearish FVGs based on price action and ATR filter. Adds new FVGs to the appropriate array. FVG Management: Updates the arrays, moves invalidated FVGs, and checks for signals. Drawing: On the last bar, clears all previous drawings and redraws the current FVGs and their labels. 6. Alerts Alert Conditions: Sets up alerts for when a bullish or bearish IFVG signal is triggered, so users can be notified. Summary In short: This script automatically finds and tracks "Imbalance Fair Value Gaps" on your chart, highlights them, and alerts you when price interacts with them in a significant way. It uses advanced Pine Script features to manage and visualize these zones dynamically, helping traders spot potential reversal or continuation points based on gap theory
Pine Script® göstergesi
Fent-calaix tarafından
Lot Size Calculator - [ £ $ € ₹ ¥ ] Hello and welcome to my FREE Lot Size Calculator. What asset does this indicator work on. ◼︎This indicator is designed for MAJOR/MINOR currency pairs ONLY. How can you benifit from using this indicator. ◼︎Once loaded onto your chart you can flick through MAJOR/MINOR currency pairs to get the correct lot sizes. No need to work out lot sizes via websites. ◼︎Choose risk percentage of account balance. ◼︎Shows your account balance, risk percentage, cash at risk, your stop loss in pips, and your lot size. ◼︎Choose between 3 different display options. What account currencies can i use. ◼︎Theres a list of multiple account currencies to choose from. Screenshot 2025-07-28 at 16.43.53 Can i customise this indicator? ◼︎There are a few options for this. Screenshot 2025-07-28 at 16.44.05
Pine Script® göstergesi
sureshsunnykumar tarafından
This is a multi-layered swing breakout scanner design🧠 What It Does: Dynamically plots swing highs and lows using customizable pivot length Confirms breakout signals with: ✅ Volume spike (above 20-period SMA × multiplier) ✅ RSI trend confirmation (RSI > 50 for longs, < 50 for shorts) ✅ EMA trend filter (price above/below EMA to align with momentum) 🔔 Alerts Included: "Break Above Swing High" (volume + trend confirmed) "Break Below Swing Low" (volume + trend confirmed) 📈 Use this tool on any timeframe (5m, 1H, 4H) and asset (stocks, crypto, ETFs). It is ideal for: Momentum swing traders Intraday breakout scalpers Traders filtering false signals using volume & structure
Pine Script® göstergesi
michaelvalerio0511 tarafından
Support/Resistance MTF Merge ZonesIndicator Introduction Support/Resistance MTF Merge Zones is an advanced technical analysis tool that automatically identifies and merges key support/resistance zones by analyzing highs and lows from multiple timeframes (15M, 1H, 4H, Daily). Key Features Multi-Timeframe Analysis: Integrates data from 15M, 1H, 4H, and Daily charts Smart Zone Merging: Automatically consolidates levels within a specified percentage range into unified zones Dynamic Color System: Distinguishes support/resistance zones based on position relative to current price Strength Indication: Highlights zones where multiple levels converge as strong zones Usage Guide Configuration Parameters Lookback Period (10): Period for calculating highs/lows Adjustable range: 5-30 Higher values detect more long-term levels Zone Merge % (0.5): Percentage threshold for zone merging Range: 0.1-2.0% Higher values merge levels across wider price ranges Min Levels for Zone (2): Minimum number of levels required to form a zone Range: 2-5 levels Higher values display only more confirmed zones Box Opacity (7): Transparency level of zone boxes Range: 0-100% Color Scheme Red: Resistance zones above current price Blue: Support zones below current price Orange: Strong zones (3+ merged levels)
Pine Script® göstergesi
RUpward tarafından
1