Şimdi başlat

Candlestick analysis

GAYBEAR SWING Clean v6 mobile-safeHow to Use Sniper Swing — Clean v6 (Mobile-Safe) Purpose Sniper Swing — Clean v6 is a trend-aligned swing indicator designed to help traders identify high-probability entries and exits while minimizing noise. It works best in trending or gently rotating markets and is optimized for mobile charting. A. Chart Setup Recommended: Timeframes: 5m–1h for active trading, 4h–Daily for swing trading Instruments: Liquid equities, indices, and major ETFs The indicator plots: SMA 9 (entry trigger) EMA 20 (trend and momentum) Optional SMA 50 (higher-timeframe bias) B. Buy (Long) Signal — How to Act A BUY label appears when price reclaims short-term structure. How to trade it: Wait for price to cross above the SMA 9 Confirm EMA 20 is rising (and above SMA 50 if enabled) Optional: Confirm price is closing above EMA 20 Enter on: The close of the signal candle, or A minor pullback that holds above SMA 9 Best context: Higher lows EMA 20 sloping upward RSI not overbought C. Sell / Short Signal — How to Act The indicator offers two sell modes: 1) CrossUnder SMA 9 (Fast Exit) Use in strong trends or fast markets Exit longs or enter shorts when price loses SMA 9 2) AccuSell (Structure-Based) Use in choppy or topping markets Requires: Loss of SMA 9 plus Structural weakness (lower highs/lows, RSI < 50, or EMA 20 turning down) How to trade it: Exit longs when sell label appears Aggressive traders may enter short positions Conservative traders wait for follow-through D. RSI Arrows — Context Only OB arrows warn of potential exhaustion OS arrows suggest relief or bounce zones RSI does not trigger trades — it informs patience and risk E. Position Coloring & State Green candles = long bias Purple candles = short bias Background tint reinforces short exposure Coloring persists until the opposite signal prints This helps visually manage trades without staring at labels. F. Risk Management (User-Defined) The indicator does not manage stops or targets. Common approaches: Stop below recent swing low (longs) Stop above recent swing high (shorts) Scale partials near RSI OB/OS zones G. When Not to Use It Extremely low-volume chop News-driven spikes Range-bound micro consolidations 2. Explain It Like You’re 10 👶📈 Imagine the chart is a road, and the price is a car. 🟢 Green = Go When the car drives above the yellow line, that means it’s probably going up. The indicator says: “Okay, the car looks like it wants to go forward. You can hop in.” That’s a BUY. 🟣 Purple = Uh-Oh When the car falls below the yellow line, it might start going down. The indicator says: “Careful… the car is slowing down or turning around.” That’s a SELL. 🔵 Blue Line = Wind Direction The blue line shows which way the wind is blowing. If the wind blows up → going up is easier If the wind blows down → going down is easier You want to go with the wind, not fight it. 🔺 Red & Green Arrows = Too Fast / Too Slow Red arrow = “The car is going too fast, might need a break” Green arrow = “The car is tired, might bounce” They don’t tell you to go or stop — they just say “pay attention.” 🎨 Colors Help You Remember Green bars = you’re riding up Purple bars = you’re riding down Gray = nothing exciting happening 🚨 Important Rule This tool doesn’t drive the car for you. It just says: “Now might be a good time.” You still decide when to get in and when to get out
Pine Script® göstergesi
joblesshobo2 tarafından
IBPDA Time Markers Daily OnlyThis indicator plots IBPDA (Interbank Price Delivery Algorithm) time markers based on true bar counts, not calendar days. Unlike many time-cycle tools that rely on calendar arithmetic, this script calculates 20 / 40 / 60 daily candles, ensuring accuracy across: market holidays shortened sessions exchange-specific trading calendars It is intentionally restricted to the Daily timeframe, where each bar represents one completed trading session. 🔍 What This Indicator Does Draws vertical lines at: −20 / −40 / −60 bars (exact historical daily candles) +20 / +40 / +60 bars (future projections for planning) Uses bar index–based logic, not calendar dates Prevents misuse by enforcing Daily timeframe only Draws lines once per chart load to avoid clutter and object limits ⚙️ Key Design Choices (Important) Past markers are exact Past levels use time , which means “n completed daily sessions ago” — no approximation. Future markers are projected Since future bars do not exist yet, forward levels are projected using a configurable day-step. These are meant for time-window awareness, not precision forecasting. No repainting All levels are fixed once drawn. 🧠 How to Use (Best Practice) IBPDA time levels are time magnets, not trade signals. They work best when combined with: Higher-timeframe PD arrays (weekly/monthly highs & lows) Fair Value Gaps (FVGs) Liquidity pools Market structure shifts Watch for price expansion, liquidity events, or displacement occurring near these time markers. 🛑 Limitations (By Design) Daily timeframe only Future levels are projections (exchange calendars cannot be predicted perfectly) This script does not generate buy/sell signals 🎯 Intended Audience This indicator is designed for: ICT / SMC traders Index futures traders (NQ, ES, YM, etc.) Swing traders and position traders Traders who respect time as a variable, not just price 🧩 Notes Best used as a contextual framework, not a standalone strategy Clean, lightweight, and safe for long-term chart usage Built with strict Pine Script v5 compatibility and publishing standards
Pine Script® göstergesi
pardasanijk tarafından
Dynamic Risk and RewardThe Dynamic Equity Projection (DEP Map) is an institutional-grade visual execution tool designed to automate risk-to-reward mapping directly on your chart. Unlike standard drawing tools, it is context-aware—calculating volatility and trend bias in real-time to provide a "live" projection of your trade's potential.Core Logic & Intelligence1. Trend-Filtered SentimentThe indicator uses a 200-period Exponential Moving Average (EMA) as a directional filter.Bullish Map: If the current price is above the EMA, the DEP Map projects a green "Long" zone.Bearish Map: If the price is below the EMA, it instantly flips to a red "Short" zone.This helps traders stay aligned with the primary market momentum, avoiding the trap of "trading against the tide."2. Volatility-Adaptive Risk (ATR)Rather than using arbitrary point distances, the DEP Map utilizes the Average True Range (ATR).It measures the market's "noise" level over the last 14 bars.The Stop Loss is set at a multiplier (default 1.5x) of this volatility, ensuring your stop is wide enough to survive market breathing but tight enough to maintain a high R:R.Technical FeaturesFeatureDescriptionProfessional BenefitProjection BoxA dynamic rectangle that extends into the "future" (right-side offset).Keeps the current price action clear while providing a visual goalpost for the trade.Persistent LogicUses advanced var object handling to prevent "ghosting" or label stacking.Ensures a clean, high-performance chart interface without clutter.R:R Equity LadderSegments the profit zone into specific milestones: 1.0, 2.0, 3.0, and the "Equity Target" (5.0).Allows for precise partial profit-taking and psychological target setting.Dashed SL LineA high-contrast red dashed line indicating the invalidation point.Provides an immediate visual cue of the trade's total risk.How to Use the DEP MapIdentify the Bias: Observe the color of the box. A green box suggests looking for buying opportunities; a red box suggests selling.Verify the Levels: The labels on the right edge of the box provide the exact price points for your Stop Loss and Take Profit orders.Execute & Manage:R:R 1.0: The "Safety Point." Many traders move their stop to breakeven here.R:R 2.0 - 3.0: The "Standard Exit." This is where the bulk of the trade's profit is usually captured.Equity Target: The "Home Run." Reserved for high-conviction trend extensions.
Pine Script® göstergesi
day_trade_mind tarafından
ICT Liquidity Sweep [KTY] ICT Liquidity Sweep Hi, I'm Kim Thank You 👋 KTY = Kim Thank You (김땡큐) Detects sweep candles that grab liquidity at swing highs/lows and reverse back inside. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 FEATURES - Liquidity Sweep Detection - Wick breaks level + Close inside = Sweep ✅ - Break and close outside = Real breakout (no sweep) - Visual Display - ⇩: High liquidity swept (BSL) - ⇧: Low liquidity swept (SSL) - Sweep line connects liquidity level to sweep candle - Vertical line marks sweep candle wick area - Multi-Timeframe - LTF and HTF sweep detection - HTF sweeps are more significant ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ✅ HOW TO USE - ⇩ detected → Check for potential bearish reversal - ⇧ detected → Check for potential bullish reversal - Combine with OB/FVG for better accuracy - HTF sweeps carry more weight than LTF ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 💡 TIPS - Sweeps indicate smart money grabbing liquidity - Wait for confirmation before entering - Multiple sweeps at same level = stronger signal - Use with market structure for confluence ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ DISCLAIMER This indicator is for educational purposes only. Not financial advice. Always do your own research.
Pine Script® göstergesi
Kim-Thank_You tarafından
FOCUS all in one (N-TABLOUH)It took me hours and hours to build this indicator so it shows the important stuff we need to watch as traders! Here you see a price label with a countdown, how much the asset has retraced from its high or low, and the total session range. You also get 4h separators to show the move, keeping you aware of the 4/8 or 12h window. Plus, there is a table showing the assets you want to trade so we don't have to go flip charts and waste time
Pine Script® göstergesi
amazighin tarafından
Multi Market VWAP SystemMulti‑VWAP — Adaptive, Multi‑Session Anchored VWAP Suite Multi‑VWAP is a comprehensive, multi‑session Volume‑Weighted Average Price engine designed for traders who rely on precise, session‑aware VWAP levels across equities, futures, and crypto. Built for Pine Script v6, it handles complex market structures, custom anchor dates, and non‑standard trading sessions with robust error‑tolerant logic. What This Indicator Does This tool calculates and displays a full suite of anchored VWAPs, including: Standard Period VWAPs - Daily - Weekly - Monthly - Yearly To‑Date VWAPs - Week‑to‑Date (WTD) - Month‑to‑Date (MTD) - Year‑to‑Date (YTD) Custom Anchored VWAP - Anchor to any user‑selected date - Automatically recalculates from the first bar of that date - Works across all markets, including 24/7 crypto Multi‑Day Rolling VWAPs Optional rolling VWAPs for: - 2‑day - 3‑day - 4‑day - 5‑day - 10‑day - 20‑day - 50‑day Each VWAP can be toggled individually for a clean, customizable chart. Key Features ✔ Market‑Adaptive Session Handling Automatically adjusts for: - Regular equities sessions - Futures extended hours - 24/7 crypto markets - Holidays (via MarketHolidays library) ✔ Clean, Efficient, Pine v6 Architecture - No deprecated functions - No array overflows - No undefined variables - Defensive programming for unsupported markets - Optimized for performance on lower‑timeframe charts ✔ Visual Clarity & Control - Independent color and visibility toggles - Optional labels showing VWAP values - Smart timestamp anchoring for all VWAP types - Minimal chart clutter with maximum information density Who This Indicator Is For This tool is ideal for traders who rely on VWAP structure for: - Intraday mean‑reversion - Swing anchoring - Multi‑session bias - Institutional level mapping - Crypto VWAP structure where no “session” exists If you use VWAP as a core part of your workflow, this script gives you the flexibility and precision needed for modern multi‑market trading. Notes - This script does not repaint. - All VWAPs are calculated using standard cumulative volume‑weighted methodology. - Custom date VWAP begins at the first bar of the selected date on the chart’s timeframe.
Pine Script® göstergesi
geetarplaya tarafından
Smart money PSP with color themesPSP with Color Themes — Price Strength Parity Indicator PSP with Color Themes is a visual correlation indicator designed to detect Price Strength Parity (PSP) between the current chart symbol and a reference symbol. It highlights candles where price behavior between two correlated instruments diverges or aligns, which is often used in SMT (Smart Money Technique) and intermarket analysis. The indicator works directly on the chart and colors candles when a PSP condition is detected, using flexible and customizable color themes. 📌 What Is PSP (Price Strength Parity)? PSP identifies situations where two correlated assets: Move in opposite directions → Direct PSP (classic SMT divergence) Move in the same direction → Inverse PSP (confirmation mode) Such behavior often precedes: Reversals Continuations Liquidity grabs Market structure shifts ⚙️ Indicator Inputs Reference Symbol Defines the second asset used for comparison (e.g., ETHUSDT vs BTCUSDT). Purpose: To detect relative strength or weakness between two correlated markets. Inverse Correlation Mode Inverse Correlation Mode (true / false) Allows switching between divergence-based and confirmation-based analysis. Color Theme Available presets: Green / Red Blue / Orange Purple / Yellow Teal / Pink Custom Purpose: Adapts the indicator visually to different chart styles and backgrounds. 📈 How to Use in Trading Typical use cases: SMT divergence detection Intermarket confirmation Reversal timing Liquidity sweep context SMC / ICT models Recommended combinations: Market Structure (BOS / CHoCH) Fair Value Gaps Liquidity levels Session highs /lows ⚠️ Important Notes PSP is context-based, not a standalone entry system Best results on correlated markets: BTC / ETH Indices (ES / NQ / YM) FX pairs (EURUSD / DXY)
Pine Script® göstergesi
crypto_daytrade tarafından
PowerCandles - FVGThe FVG Body Highlighter is a high-visibility tool designed to identify institutional displacement and price imbalances in real-time. By focusing strictly on the Fair Value Gap (FVG) sequence, it isolates the exact moment "Smart Money" enters the market with enough force to leave an imbalance behind. Core Functionality Mechanical Detection: Automatically scans for the 3-candle FVG sequence where the wick of Candle 1 and the wick of Candle 3 fail to meet, leaving a "gap." Body-Centric Highlighting: Unlike standard box-heavy indicators, this tool colors the entire body of the second candle (the displacement bar). This keeps your chart clean and highlights the force of the move rather than just the area. Institutional Intent: It filters out noise by only marking candles that create a true structural gap, signaling that a significant buy or sell program has been initiated. Strategic Use Trend Confirmation: Use the body highlight as a "green light" that momentum has shifted in your direction after tapping a key institutional level. Zero-Clutter Mapping: Because it highlights bars rather than drawing boxes into the future, it is perfect for traders who prefer a clean price action chart but want to catch every Fair Value Gap as it forms. Confluence Entry: An A+ setup occurs when the FVG Body Highlighter triggers as price bounces off a PDH/PDL or Midnight Open level.
Pine Script® göstergesi
PowerEdgeTrader tarafından
Institutional Structure [Clean Pro]Institutional Structure — Script Explanation This script is designed to map institutional market behavior using high-timeframe structure, not retail noise. It focuses on where smart money acts, not on frequent signals. 🔹 1. High-Timeframe Support & Resistance (HTF S/R) The script identifies major structural highs and lows using a higher lookback period. Purpose: Defines where institutions previously distributed or accumulated Acts as natural decision zones Filters out low-quality intraday levels Why it matters: Institutions trade from key HTF levels, not random support/resistance. 🔹 2. Equilibrium (50% Mean Price) The equilibrium line represents the fair price between HTF high and low. How it’s used: Below equilibrium → discount zone (buy interest) Above equilibrium → premium zone (sell interest) Professional insight: Smart money prefers buying discounts and selling premiums, not chasing price. 🔹 3. Market Structure Shift (MSS) Instead of frequent BOS labels, the script detects true directional shifts. Bullish MSS: Price closes above previous HTF high Bearish MSS: Price closes below previous HTF low Why MSS over BOS: MSS confirms control change Reduces false signals Aligns with institutional execution logic 🔹 4. Liquidity Sweep Detection (Wick-Based) The script identifies stop-hunt behavior using wick rejection logic. Buy-side liquidity: Wick above HTF high, but close back below Sell-side liquidity: Wick below HTF low, but close back above Meaning: Stops were triggered, but price failed to accept → smart money absorption 🔹 5. Fair Value Gap (FVG) – Refined Imbalance Fair Value Gaps highlight inefficient price movement. Bullish FVG: Price leaves an upside imbalance Bearish FVG: Price leaves a downside imbalance How pros use it: As reaction zones, not entry signals Best combined with liquidity + MSS 🔍 How Everything Works Together The script is context-based, not signal-based: 1️⃣ HTF structure defines the battlefield 2️⃣ Liquidity is taken (stop hunts) 3️⃣ MSS confirms direction 4️⃣ FVG offers precision 5️⃣ Equilibrium filters bias This creates high-probability trade environments, not overtrading. 📌 Best Practices (Professional Use) Timeframes: 1H / 4H / Daily Avoid lower TF noise Trade only after liquidity is taken Use FVG as confirmation, not trigger Respect equilibrium bias 🎯 Summary ✔ Clean institutional logic ✔ No clutter, no spam ✔ HTF-driven decisions ✔ Liquidity-first mindset ✔ Designed for BTC, Gold & FX 🧠 Trade where institutions trade — not where indicators flash.
Pine Script® göstergesi
Mentor_Michael03 tarafından
PowerGaps - Multi-Timeframe Fair Value GapsPowerGaps — Multi‑Timeframe Fair Value Gap Engine PowerGaps is a precision‑built, multi‑timeframe Fair Value Gap (FVG) engine designed for traders who rely on clean, reliable market structure signals without noise, repainting, or clutter. It automatically detects and plots institutional FVGs from higher timeframes directly onto your current chart, giving you a clear view of premium/discount imbalances and liquidity inefficiencies that matter most. What PowerGaps Does • Scans four customizable timeframes (e.g., M5, M15, H1, H4) for valid bullish and bearish FVGs • Projects those HTF gaps onto any lower timeframe chart • Colors and labels each gap by timeframe for instant visual recognition • Tracks each gap until it is mitigated by wick touch, then automatically closes and removes it • Ensures no repainting, no duplicates, and no phantom gaps • Maintains perfect alignment across timeframes using a robust, cross‑TF‑safe architecture Why It’s Different PowerGaps is engineered with a strict validation and mitigation system that prevents the common issues seen in many FVG indicators: • No repeated stacking of the same gap • No gaps disappearing when switching timeframes • No false mitigation signals • No stale or corrupted objects left behind Every plotted gap is intentional, accurate, and actionable. Ideal For • ICT‑style traders • Liquidity and imbalance‑based strategies • HTF bias mapping • Scalpers who rely on HTF inefficiencies • Swing traders looking for clean continuation or reversal zones Inputs & Customization • Enable/disable each timeframe independently • Choose custom colors for bullish and bearish gaps • Full control over which timeframes you want projected onto your chart
Pine Script® göstergesi
PowerEdgeTrader tarafından
Testthis is a test script bool newClosed = strategy.closedtrades > strategy.closedtrades if newClosed int last = strategy.closedtrades - 1 // 最新平仓 trade 的关键信息 string eid = strategy.closedtrades.entry_id(last) float epx = strategy.closedtrades.entry_price(last) string xid = strategy.closedtrades.exit_id(last) float xpx = strategy.closedtrades.exit_price(last) float pnl = strategy.closedtrades.profit(last) // 注意：单位是策略币种/合约计价（受 commission 等影响） // 判断是不是“止损”触发（看 exit_id） bool isStop = str.startswith(xid, "S_SL_") string msg = "CLOSED TRADE (new) " +"entry: " + eid + " @ " + str.tostring(epx) + " " +"exit : " + xid + " @ " + str.tostring(xpx) + " " +"pnl : " + str.tostring(pnl) + " " +"isStop=" + str.tostring(isStop) label.new(bar_index, high, msg, style=label.style_label_down, textalign=text.align_left)
Pine Script® stratejisi
panda952701 tarafından
Custom Step Bar CountHere is a professional description for your TradingView script, suitable for the "Description" field when publishing. I have provided two versions: a **Standard Version** (detailed and professional) and a **Short Version** (concise). ### Option 1: Standard Version (Recommended for Publishing) **Title:** Custom Step Bar Count **Description:** This indicator is an advanced bar counting tool designed for traders who need to track time cycles or specific bar sequences with custom arithmetic progressions. Unlike standard counters that simply display "1, 2, 3," this script allows you to decouple the **display frequency** from the **displayed value**. The counter automatically resets at the beginning of every new trading day. **Key Features:** * **Custom Display Interval:** Choose how often a label appears (e.g., every 5 bars). * **Custom Number Increment:** Define the value step for the displayed numbers (e.g., count by 3s). * **Daily Reset:** The count restarts automatically at the beginning of each session. * **Visual Customization:** Adjust label size and text color to fit your chart theme. **How it works (Example):** If you want to track a cycle where every **5th** bar represents a value of **3**: 1. Set **Display Every X Bars** to `5`. 2. Set **Number Increment** to `3`. **Result:** * Bar 5 shows label "**3**" * Bar 10 shows label "**6**" * Bar 15 shows label "**9**" This is particularly useful for specific time-based strategies, Gann analysis, or backtesting setups that require non-linear counting. --- ### Option 2: Short Version (Concise) **Title:** Custom Step Bar Count **Description:** A flexible bar counting utility that resets daily. This script allows you to customize both the frequency of the labels and the numeric step value. **Settings:** * **Display Every X Bars:** Controls the gap between labels (e.g., every 5th bar). * **Number Increment:** Controls the number sequence (e.g., increments of 3). **Example:** With an interval of **5** and an increment of **3**, the script will display: * 5th Bar: **3** * 10th Bar: **6** * 15th Bar: **9** Includes options for text color and label size. Updated for Pine Script v6.
Pine Script® göstergesi
zenithffffffffff tarafından
Gold Sniper Pro: Trend & Reversal SystemTitle: Gold Sniper Pro: Trend & Reversal System Headline: Stop choosing between "Buying the Dip" and "Chasing the Trend." Now you can do both. Introduction: Most indicators fail because they only work in one market condition. Reversal indicators fail during strong breakouts (selling too early), and Trend indicators fail during ranging markets (buying the top). Gold Sniper Pro solves this by running two separate algorithms simultaneously to cover every phase of price action on Gold (XAUUSD). How It Works (The Dual-Core Logic): 1. 🟢 SNIPER MODE (The "Buy Low" Logic) Goal: Catch the exact bottom of a pullback. Logic: Detects when price sweeps a liquidity low but is trading at a "discount" (below the EMA 20). Signal: Displays a Green "SNIPER" label. Best for: Ranging markets and deep corrections. 2. 🔵 TREND MODE (The "Breakout" Logic) Goal: Catch the high-momentum runaway moves (like the 16:40 pump). Logic: Detects when price is holding above the EMA 20 with strong momentum. It buys the strength, not the weakness. Signal: Displays a Blue "TREND" label. Best for: News events and strong directional rallies. Key Features: ⚡ Dynamic EMA Filter: Replaces laggy RSI with real-time price action relative to the EMA 20. 🛡️ Multi-Timeframe Safety: Built-in 30m Trend Filter to prevent trading against the major trend (can be toggled OFF for aggressive scalping). 🎯 Auto TP/SL Lines: Automatically plots your Risk:Reward (2:1) targets on the chart. 🚀 "Force Trade" Switch: A new feature that allows you to bypass safety filters during high-volatility news events to catch fast breakouts. How to Use: Timeframe: Best on 1m or 5m (Designed for XAUUSD/Gold). Aggressive: Check "Ignore 30m Filter" in settings to catch every scalping opportunity. Conservative: Uncheck "Ignore Filter" to only trade when the 30m trend is aligned. Exit: Close trade when price hits the Green TP line or Red SL line. Settings: EMA Length: 20 (Standard Institutional Trend). Reward Ratio: 2.0 (Default).
Pine Script® göstergesi
chyg8823 tarafından
Gold Trap Hunter (Auto-Structure & Liquidity Sweeps)The Concept: Stop Getting Trapped Have you ever bought a breakout, only to watch the price immediately reverse and hit your stop loss? This is called a Liquidity Trap (or "Sweep"). Institutional algorithms often push price slightly above a key High or below a key Low to trigger retail stop losses before moving the market in the real direction. The Universal Trap Hunter is designed to visualize this market structure automatically. It helps you avoid "Fake Breakouts" and identifies high-probability Reversal points where the "Smart Money" is active. How It Works (The Logic) 1. The Structure Boxes (The Battlefield) The indicator draws a shaded box representing the Higher Timeframe Structure. Green Box: The market structure is Bullish (Making Higher Highs). We are looking for longs. Red Box: The market structure is Bearish (Making Lower Lows). We are looking for shorts. Feature: This is Universal. If you are on the 15-minute chart, it automatically calculates the 4-Hour structure for you. You are always trading with the bigger trend. 2. The "SWEEP" Signal (The Entry Trigger) A "Sweep" is the most powerful signal in this system. What is it? Price breaks a previous structure High/Low but fails to close there. It grabs the liquidity and reverses. ⚔️ Green Sweep: Price broke the previous Low (trapping sellers), then closed back UP inside the range. This is a bullish reversal signal. ⚔️ Red Sweep: Price broke the previous High (trapping buyers), then closed back DOWN inside the range. This is a bearish reversal signal. 3. The Noise Filter (Gray Candles) Trading is about knowing when NOT to trade. Gray Candles: These indicate "Noise." The price action is choppy or conflicting with the trend. Colored Candles: The candles only turn Green or Red when the Trend, Momentum, and Structure all align. If you see color, the move is valid. Settings & Customization Structure Mode (Auto vs Manual): Auto (Recommended): The script automatically selects the best Higher Timeframe for you. Scalping 1m? → It looks at 1H Structure. Trading 15m? → It looks at 4H Structure. Manual: You can lock it to a specific timeframe (e.g., always show Daily structure). Colors: Fully customizable to fit your dark/light theme. How to Trade This Strategy Identify the Trend: Look at the background Box color (Green = Bullish, Red = Bearish). Wait for the Trap: Do not chase the price. Wait for price to challenge the edge of the box. The Signal: Look for the "⚔️ SWEEP" label. If the box is Green and you see a Green Sweep at the bottom: Strong Buy. If the box is Red and you see a Red Sweep at the top: Strong Sell. Disclaimer: This tool is for educational purposes and market analysis only. It helps visualize market structure and liquidity traps but does not guarantee future results. Always manage your risk.
Pine Script® göstergesi
chyg8823 tarafından
1
Gold Sniper (Liquidity Sweep)Concept : Stop Hunting the "Smart Money" Way Most traders lose money because they enter exactly where "Smart Money" is looking to trigger Stop Losses. We have all been there: You buy at support, the price dips just below your stop loss, takes you out, and then rockets up without you. Gold Sniper is designed to capitalize on this exact behavior . Instead of buying the support, this script waits for the Liquidity Sweep (the "Stop Hunt"). It identifies when price breaks a key structure level to trap sellers, and signals an entry only when the price reclaims that level with momentum. How It Works (The Logic) This indicator looks for a specific "Perfect Storm" setup using a 4-step confirmation process: Identifies Support (Yellow Dots): It tracks local pivot lows (default 10 bars) to visualize the "Floor" where retail traders likely have their stop losses. Detects the Sweep: It waits for price to drop below these yellow dots. This is the "Trap" phase where liquidity is grabbed. Confirms the Reclaim: It does NOT catch the falling knife. It waits for a candle to close back ABOVE the broken support level. Momentum Check (RSI): It ensures internal strength (RSI) is rising compared to the previous low, confirming that the drop was a trap, not a genuine crash. Visual Features Yellow Dots: Dynamic Support Levels / Pivot Lows. "SWEEP BUY" Label: Signals exactly when the trap is complete and the reclaim has occurred. Red Line (Hard Stop): Automatically draws a Stop Loss level at the lowest point of the sweep candle. How to Use This Strategy Wait for the Setup: Do not trade if price is just drifting. Wait for price to challenge and break the Yellow Dots. The Trigger: Enter immediately on the Close of the candle with the "SWEEP BUY" label. Stop Loss: Place your Hard Stop at the Red Line provided by the indicator. Rule: If price touches the Red Line, the setup has failed (it was a real crash, not a sweep). Exit immediately. Best Timeframes: Optimized for 1-Minute and 5-Minute scalping on Gold (XAUUSD) and Futures, but works on all liquid assets. Settings Pivot Lookback: How many bars back to check for the support floor (Default: 10). RSI Length: Sensitivity of the momentum filter (Default: 14). Disclaimer : This tool is for educational purposes and market analysis only. It identifies high-probability "Liquidity Sweep" setups but does not guarantee future results. Always manage your risk.
Pine Script® göstergesi
chyg8823 tarafından