SMA Reversal Sequential MTF - Pure Confirmed Final V2SMA Reversal Sequential MTF - Detailed Indicator Manual
This indicator identifies trend reversal points based on the shape of a Simple Moving Average (SMA) and monitors these signals across multiple timeframes (MTF). By synchronizing trends from various intervals, it provides a robust framework for identifying high-probability entry points.
1. Core Logic Overview
The indicator detects "peaks" and "troughs" in the SMA to identify potential reversal points.
Bullish Reversal (UP): Occurs when the SMA turns upward after a period of decline (forming a "trough").
Bearish Reversal (DN): Occurs when the SMA turns downward after a period of inclination (forming a "peak").
In addition to detecting these turns, the indicator tracks the high/low prices of the most recent reversal points on a "Confirmed Bar" basis. When the current price breaks these levels, it confirms a trend continuation or a breakout.
2. Full Description of Input Settings
Basic Settings / Main Settings
Use Short Period (5, 4, 7) / 短期設定を使用:
true: Increases sensitivity to price movements by using shorter parameters (e.g., SMA 5). Suitable for scalping.
false: Uses standard parameters (e.g., SMA 20). Suitable for day trading and swing trading.
Timeframe Visibility / 時間足表示設定
Allows individual toggling of visibility for each timeframe's labels and lines.
Show 1M to 1m / 1M〜1m表示: Individually enable or disable the calculation and display of data for Monthly (1M), Weekly (1W), Daily (Daily), 4H, 1H, 15M, 5M, and 1m timeframes.
Hide Higher TF Settings on Lower TFs / 下位足での上位設定を非表示: When enabled, this removes lower timeframe data from higher timeframe charts to reduce visual noise.
Drawing Options / 表示オプション
Show Only Current TF Labels / 現在足のラベルのみ表示: If enabled, only labels corresponding to the chart's current interval (e.g., "5" labels on a 5M chart) will be displayed.
Show Trendlines & Channels / トレンドライン＆チャネルを表示: Automatically draws trendlines and parallel channels by connecting recent local reversal points on the current timeframe.
Show Sequential Labels / 転換点ラベル表示: Displays timeframe labels (e.g., "15", "1H") at the exact point where the SMA reversed.
Show Break Lines / ブレイクライン表示: Draws horizontal lines from the most recent peaks or troughs and displays a "BREAK" label when price crosses them.
Break Label Offset / ブレイク文字の右オフセット: Adjusts the horizontal distance of the "BREAK" label from the current bar for better visibility.
Additional Alert Settings / 追加アラート設定
Alert 1: Current + 2 Higher TFs Sync (Blue/Red) / アラート1: 現在・上位2つ同調:
Triggers a notification when the trend (UP/DN) of the current chart's timeframe, the next higher timeframe, and the second higher timeframe all align.
Alert 2: 4-TF Sync Including Current (Orange) / アラート2: 表示足を含む4足同調:
Triggers a notification when four consecutive timeframes (Current + 3 Higher) align in the same direction. This is considered a high-conviction signal.
3. How to Read the Dashboard (Table)
The compact table in the top-right corner displays the current trend status for key timeframes in real-time.
Blue Background (UP): Indicates price has broken the recent peak, confirming an uptrend for that timeframe.
Red Background (DN): Indicates price has broken the recent trough, confirming a downtrend for that timeframe.
Gray Background: Indicates the trend status is yet to be determined or is in a neutral state.
The table items are fixed to show 1D, 4H, 1H, 15M, and 5M from top to bottom. When all rows turn the same color, it indicates a strong market trend across the entire spectrum.
4. Key Feature: MTF Sync Alerts
The primary advantage of this indicator is its automation of manual Multi-Timeframe Analysis.
3-TF Sync: On a 15M chart, if the 15M, 1H, and 4H trends align, a small Blue (Buy) or Red (Sell) label appears on the chart.
4-TF Sync: If the alignment extends to a 4th timeframe (e.g., up to the Daily timeframe on a 15M chart), an Orange label is displayed, signaling a very strong trend confluence.
このインジケーター（SMA Reversal Sequential MTF）は、移動平均線（SMA）の形状からトレンドの転換点を特定し、それを複数の時間足（MTF）で監視・同期させることで、高精度なエントリーポイントを探るためのツールです。
以下に、すべてのインプット項目を含む詳細な説明をまとめました。
1. 概要と基本ロジック
このインジケーターは、SMA（単純移動平均線）が「山」や「谷」を作ったポイントを転換点として認識します。
上昇転換: SMAが一定期間、下降した後に上昇へ転じた（谷を作った）タイミング。
下降転換: SMAが一定期間、上昇した後に下降へ転じた（山を作った）タイミング。
これに加えて、直近の転換点の価格（高値・安値）を「確定足」で更新し、そのラインを価格がブレイクした際にトレンドの継続や転換を判定します。
2. インプット項目の詳細
基本設定 / Main Settings
短期設定を使用 (5, 4, 7):
true（チェックあり）: 短期的な動きに敏感になります（SMA 5期間など）。スキャルピング向け。
false（チェックなし）: 標準的な設定（SMA 20期間など）。デイトレード・スイング向け。
時間足表示設定 / Timeframe Visibility
各時間足のラベルやラインを表示するかどうかを個別に設定します。
1M〜1m表示: 月足(1M)から1分足(1m)まで、各MTFデータの計算・表示をオン/オフします。
下位足での上位設定を非表示: * 現在表示しているチャートより上位の時間足設定だけを表示し、ノイズを減らすためのスイッチです。
表示オプション / Drawing Options
現在足のラベルのみ表示: チェックすると、チャートの時間足と一致するラベル（例：5分足チャートなら「5」のラベル）のみ表示されます。
トレンドライン＆チャネルを表示: 現在表示している足の直近の転換点同士を結び、トレンドラインと並行チャネルを自動描画します。
転換点ラベル表示: SMAが反転した位置に「15」や「1H」などの時間足ラベルを表示します。
ブレイクライン表示: 直近の転換点（高値・安値）から右側に水平線を引き、そこを価格が抜けた際に「BREAK」の文字を表示します。
ブレイク文字の右オフセット: 「BREAK」ラベルを右側にどれくらい離して表示するかを調整します。
追加アラート設定 / GRP_NEW_AL
アラート1: 現在・上位2つ同調 (青/赤):
「表示中の足 + 1つ上 + 2つ上」の計3つのトレンド（UP/DN）が一致した瞬間に通知します。
アラート2: 表示足を含む4足同調 (オレンジ):
「表示中の足 + 上位3つ」の計4つのトレンドがすべて一致した強力なサイン時に通知します。
3. テーブル（ダッシュボード）の見方
画面右上に表示されるコンパクトなテーブルは、各時間足の現在のトレンド状態をリアルタイムで示しています。
青背景（UP）: 直近で高値をブレイクし、上昇トレンドにある状態。
赤背景（DN）: 直近で安値をブレイクし、下降トレンドにある状態。
灰背景: 状態が未確定なケース。
表示項目は上位足から順に 1D（日足）, 4H, 1H, 15M, 5M となっており、これらが一色に染まるタイミングが環境認識上の強いトレンドを示唆します。
4. 特徴的な機能：MTF同調アラート
このインジケーターの最大の強みは、手動でのマルチタイムフレーム分析を自動化している点です。
3足同調（SYNC）: 15分足チャートであれば「15M・1H・4H」が同じ方向を向いた時にチャート上に青（買い）または赤（売り）の小さなラベルが表示されます。
4足同調（4-TF SYNC）: さらに上位の足（15分足なら日足まで）が同調すると、オレンジ色のラベルが表示され、より強い根拠となります。
Candlestick analysis
Yettys Breakout Trading Pro V2Breakout Trading Pro – Key Levels & Sessions (Indicator Description)
Breakout Trading Pro is an all-in-one market structure + session toolkit built for traders who want clean, actionable levels and session context on a single chart. It automatically plots the most important high/low reference levels, highlights key global trading sessions, and includes optional signal modules for EMA pullbacks, opening range breakouts (ORB), 200 EMA bounces, and more.
This indicator is designed to help you quickly answer:
“Where are the most important levels today?”
“Which session created the range?”
“Is price breaking out or rotating between key zones?”
“Do I have trend alignment for pullbacks / ORB setups?”
Key Features
1) Auto Key Levels (High/Low Framework)
Toggle on/off the levels you want displayed:
Current Day High / Low (RTH only)
Important: This script tracks the Current Day High/Low only during Regular Trading Hours (RTH). Pre-market does not inflate today’s range.
Previous Day High / Low
2 Days Previous High / Low
Pre-Market High / Low (separate from RTH range)
Weekly High / Low
Monthly High / Low
Each level supports:
Custom colors
Custom line style (solid/dashed/dotted)
Custom line width
Optional labels with 4 display modes:
Labels / Full Text / Prices / None
plus adjustable label offset.
2) Session Tools (Asia / London / NY Options)
This indicator can track and draw session ranges based on user-defined session windows:
Asian Session High/Low
London Session High/Low
Optional NY Open line
Optional London Open line
These session levels are useful for range expansion, liquidity runs, and context around transitions between low-volume and high-volume periods.
3) 15-Minute Opening Range (ORB Foundation)
A built-in 15-minute Opening Range tool:
Builds the OR High/Low during the first 15 minutes of RTH (default 9:30–9:45)
Draws an Opening Range box
Plots an optional midpoint line
This creates a clear visual framework for ORB-style breakouts and intraday rotation.
4) Trend + Mean Tools (EMA + VWAP)
Includes optional:
EMA 9
EMA 21
EMA 200
VWAP
Optional VWAP standard deviation bands:
Band 1 / Band 2 / Band 3 multipliers
Shaded fill support for cleaner visuals
5) Open Levels (Previous Opens)
Optional levels for:
Previous Day Open (PDO)
Previous Week Open (PWO)
Previous Month Open (PMO)
These are often used as “magnet” prices and reaction zones, especially on indices and metals.
6) Pivot Points (Daily)
Optional daily pivot set calculated from the previous day’s High/Low/Close:
Pivot (P)
R1 / R2
S1 / S2
7) Fair Value Gaps (Optional)
If enabled, the script scans back through recent bars and draws:
Bullish FVG zones
Bearish FVG zones
Includes:
Lookback control
Minimum gap size filter (%)
Adjustable colors
Signal Modules (Optional)
A) EMA Pullback Signals (Trend Pullback Logic)
Buy signal (label up) triggers when:
Price crosses above EMA 9
EMA 9 is above EMA 21 (trend alignment)
Price was below EMA 9 X bars ago (pullback confirmation)
Sell signal (label down) triggers when:
Price crosses below EMA 9
EMA 9 is below EMA 21
Price was above EMA 9 X bars ago
You can filter signals with:
Time Filter (two configurable windows, e.g. morning + afternoon)
Higher Timeframe EMA Filter (optional trend bias using HTF EMA)
Optional: ATR-based stop reference levels can be displayed at the signal bar using ATR length + multiplier.
B) 200 EMA Bounce Signals (Optional)
This module looks for reactions at the 200 EMA using:
A configurable “touch distance” threshold (%)
Confirmation bars
Candle direction / momentum confirmation
Useful for identifying potential 200 EMA support/resistance reactions without clutter.
C) ORB Breakout Signals (Breakout → Pullback → Confirm)
This module is built for “breakout and retest” style ORB trading:
A buy signal can trigger after:
Opening Range completes
Price breaks above OR High
A pullback occurs within X bars back toward the OR boundary
Price holds above the OR boundary
Volume confirmation (volume > average volume × multiplier)
Bullish candle confirmation (close > open)
A sell signal is the inverse below OR Low.
Signal triangle size is selectable (Tiny → Huge).
Alerts Included
Alertconditions are included for:
Bullish / Bearish Hammer patterns
OR Breakout / Breakdown
EMA Pullback Buy / Sell
ORB Buy / Sell
200 EMA Support / Resistance bounce
(Use TradingView Alerts → choose the condition name.)
Recommended Usage
Best on intraday timeframes (ex: 1m / 3m / 5m / 15m) for indices and liquid futures/CFDs.
Turn on only what you need — this indicator is intentionally modular.
For clean charts: start with Key Levels + OR Box + VWAP, then add signal modules as desired.
Notes / Disclaimer
This is an indicator, not a strategy, and it does not place trades. Signals and plotted levels are informational tools intended to support your decision-making and chart structure. Always validate signals with your own risk plan, market context, and execution rules.
Breakout Trading Pro – Key Levels & Sessions (Indicator Description)
Breakout Trading Pro is an all-in-one market structure + session toolkit built for traders who want clean, actionable levels and session context on a single chart. It automatically plots the most important high/low reference levels, highlights key global trading sessions, and includes optional signal modules for EMA pullbacks, opening range breakouts (ORB), 200 EMA bounces, and more.
This indicator is designed to help you quickly answer:
“Where are the most important levels today?”
“Which session created the range?”
“Is price breaking out or rotating between key zones?”
“Do I have trend alignment for pullbacks / ORB setups?”
Key Features
1) Auto Key Levels (High/Low Framework)
Toggle on/off the levels you want displayed:
Current Day High / Low (RTH only)
Important: This script tracks the Current Day High/Low only during Regular Trading Hours (RTH). Pre-market does not inflate today’s range.
Previous Day High / Low
2 Days Previous High / Low
Pre-Market High / Low (separate from RTH range)
Weekly High / Low
Monthly High / Low
Each level supports:
Custom colors
Custom line style (solid/dashed/dotted)
Custom line width
Optional labels with 4 display modes:
Labels / Full Text / Prices / None
plus adjustable label offset.
2) Session Tools (Asia / London / NY Options)
This indicator can track and draw session ranges based on user-defined session windows:
Asian Session High/Low
London Session High/Low
Optional NY Open line
Optional London Open line
These session levels are useful for range expansion, liquidity runs, and context around transitions between low-volume and high-volume periods.
3) 15-Minute Opening Range (ORB Foundation)
A built-in 15-minute Opening Range tool:
Builds the OR High/Low during the first 15 minutes of RTH (default 9:30–9:45)
Draws an Opening Range box
Plots an optional midpoint line
This creates a clear visual framework for ORB-style breakouts and intraday rotation.
4) Trend + Mean Tools (EMA + VWAP)
Includes optional:
EMA 9
EMA 21
EMA 200
VWAP
Optional VWAP standard deviation bands:
Band 1 / Band 2 / Band 3 multipliers
Shaded fill support for cleaner visuals
5) Open Levels (Previous Opens)
Optional levels for:
Previous Day Open (PDO)
Previous Week Open (PWO)
Previous Month Open (PMO)
These are often used as “magnet” prices and reaction zones, especially on indices and metals.
6) Pivot Points (Daily)
Optional daily pivot set calculated from the previous day’s High/Low/Close:
Pivot (P)
R1 / R2
S1 / S2
7) Fair Value Gaps (Optional)
If enabled, the script scans back through recent bars and draws:
Bullish FVG zones
Bearish FVG zones
Includes:
Lookback control
Minimum gap size filter (%)
Adjustable colors
Signal Modules (Optional)
A) EMA Pullback Signals (Trend Pullback Logic)
Buy signal (label up) triggers when:
Price crosses above EMA 9
EMA 9 is above EMA 21 (trend alignment)
Price was below EMA 9 X bars ago (pullback confirmation)
Sell signal (label down) triggers when:
Price crosses below EMA 9
EMA 9 is below EMA 21
Price was above EMA 9 X bars ago
You can filter signals with:
Time Filter (two configurable windows, e.g. morning + afternoon)
Higher Timeframe EMA Filter (optional trend bias using HTF EMA)
Optional: ATR-based stop reference levels can be displayed at the signal bar using ATR length + multiplier.
B) 200 EMA Bounce Signals (Optional)
This module looks for reactions at the 200 EMA using:
A configurable “touch distance” threshold (%)
Confirmation bars
Candle direction / momentum confirmation
Useful for identifying potential 200 EMA support/resistance reactions without clutter.
C) ORB Breakout Signals (Breakout → Pullback → Confirm)
This module is built for “breakout and retest” style ORB trading:
A buy signal can trigger after:
Opening Range completes
Price breaks above OR High
A pullback occurs within X bars back toward the OR boundary
Price holds above the OR boundary
Volume confirmation (volume > average volume × multiplier)
Bullish candle confirmation (close > open)
A sell signal is the inverse below OR Low.
Signal triangle size is selectable (Tiny → Huge).
Alerts Included
Alertconditions are included for:
Bullish / Bearish Hammer patterns
OR Breakout / Breakdown
EMA Pullback Buy / Sell
ORB Buy / Sell
200 EMA Support / Resistance bounce
(Use TradingView Alerts → choose the condition name.)
Recommended Usage
Best on intraday timeframes (ex: 1m / 3m / 5m / 15m) for indices and liquid futures/CFDs.
Turn on only what you need — this indicator is intentionally modular.
For clean charts: start with Key Levels + OR Box + VWAP, then add signal modules as desired.
Notes / Disclaimer
This is an indicator, not a strategy, and it does not place trades. Signals and plotted levels are informational tools intended to support your decision-making and chart structure. Always validate signals with your own risk plan, market context, and execution rules.
Killzone - VL1V1 of the Killzone Script. Greenbox for Asia, Yellow for London, Blue and Purple is for NY.
Fibonacci Pre-Market EliteThis script automates the plotting of Fibonacci retracement and extension levels based exclusively on the Pre-Market range (NY Session). Unlike standard static Fibonacci tools, this indicator Logic to determine market bias. It automatically inverts the levels based on the chronological order of the High and Low established during the overnight session.
How the Logic Works
The script doesn't just look at prices; it looks at time.
Bullish Bias: If the Low occurs first and the High occurs later in the Pre-Market, the script anchors the 0% at the Low and the 100% at the High. Extension targets (1.618, 2.618, etc.) are projected upward.
Bearish Bias: If the High occurs first and the Low occurs later, the script anchors the 0% at the High and the 100% at the Low. Extension targets are projected downward.
Key Features
Dynamic Timezone Sync: Specifically hardcoded for America/New_York, ensuring accurate range capture regardless of your local computer time.
Full Institutional Levels: Includes all critical internal retracements (23.6%, 38.2%, 50%, 61.8%, 78.6%, 88.2%) and expansion targets (161.8%, 261.8%, 423.6%).
Ultra-Clean Visualization: Uses style=plot.style_linebr to prevent diagonal "connecting" lines between days.
Smart Floating Labels: Labels are anchored to the right edge of the chart, identifying every level without cluttering the price action or overlapping candles.
Integrated Alerts: Ready-to-use alerts for Pre-Market Range Breakouts and reaching the 161.8% Profit Target.
How to Trade It
The 50% Pivot: Acts as the "fair value" of the overnight session. Trading above it suggests a bullish premium; below it suggests a bearish discount.
Expansion Targets: Use the 161.8% (Target), 261.8% (Exit), and 423.6% (Moon) levels as high-probability take-profit zones following a breakout of the Pre-Market High or Low.
Internal Retracements: Look for entries at the 61.8% or 78.6% levels if the price retraces into the range after the open before continuing the trend.
FVG ELITE PRO - Precision NY Sniper "Stop guessing where to enter. This script combines the power of Fair Value Gaps (FVG) with the trend confirmation of institutional EMAs. Specifically designed for the New York session, it detects market imbalances and calculates surgical entries at customizable retracement levels (30%, 50%, etc.). With a dynamic risk management system and a real-time Dashboard, you have total control over your Win Rate and Risk:Reward ratio in every trade. The statistical edge that retail traders simply don't see."
Mahseri IndCombined EMA/RSI/MACD Conflict-Free Signals. giving the entery and exit points at the chart
Pullbacks CompletoThis indicator is a comprehensive Trend Following toolkit that combines two distinct, high-probability pullback strategies into a single, intelligent interface. It is designed to help traders identify precise entry points during corrections in established trends, filtering out low-quality noise.
The indicator features Smart Conflict Detection: if the two strategies generate opposing signals on the same candle, the system blocks the individual alerts and displays a Purple "X", warning the trader of market indecision.
Strategy 1: Stoch Pullback (Triangles)
Visual: Green/Red Triangles Logic:
Trend: Defined by the alignment of the Fast EMA (21) and Slow EMA (100).
The Setup: The indicator waits for the Stochastic RSI to enter an Overbought or Oversold zone.
Strict Filter: A signal is only valid if, while in the zone, the price physically tests the Fast EMA (closes against it). This filters out "shallow" pullbacks.
Trigger: The signal is fired when the Stochastic RSI crosses back out of the extreme zone, resuming the trend.
Strategy 2: Dave Landry Setup (Dots)
Visual: Green/Red Circles Logic:
Trend: Filtered by MACD Histogram momentum and the relation to the Fast EMA (21).
The Pattern: Looks for a correction of at least 2 candles making lower lows (for uptrends) or higher highs (for downtrends).
Trigger: Enters when the price breaks the high/low of the previous candle, provided it closes in favor of the EMA 21.
Anti-Climax Filter: Includes a "Stretched" filter to prevent buying/selling on exhausted "Elephant Bars" (huge candles that have already consumed the move).
Key Features
Dual Alert System: Receive specific alerts for "Pullback" or "Landry" setups.
Conflict Warning: If Strategy A says "Buy" and Strategy B says "Sell" simultaneously, a "Doubtful Signal" alert is triggered, and a purple Cross appears on the chart.
Smart Visibility: The indicator automatically hides or shows the Moving Averages depending on which strategies you have enabled in the settings.
Educational Tooltips: Hover over the "i" icons in the settings menu to read the rationale behind each specific filter.
How to Use
Green Triangle: Look for Long opportunities (Stoch Pullback).
Green Dot: Look for Long opportunities (Landry Breakout).
Red Triangle: Look for Short opportunities (Stoch Pullback).
Red Dot: Look for Short opportunities (Landry Breakout).
Purple X: Stay Out. The setups are conflicting (Trend vs. Momentum disagreement).
Configuration You can toggle each strategy on/off in the settings menu. You can also choose to display the Overbought/Oversold background zones to visualize where the Stoch Pullback is "arming".
Swing Levels + Bull/Bear 50% Wick RejectionsShows Stop run rejections that close with a 50% wick or greater
Previous Day NY AM/PM High/LowMarks previous day’s NY AM high/low and PM high/low
Lines start at 8:30 AM the next day
Thin black lines
Labels on right side of the line, slightly offset
Works for any timeframe chart
Market Structure External/Internal with BOS/CHoCH/FTC [zazenio]You're staring at a chart trying to figure out one thing: which way is price going? You see a move up—is it a new trend or just a pullback? You spot what looks like a swing low, but is it real or will price slice right through it? And even if you get the direction right, where do you enter?
This market structure indicator can help answer these questions.
Market Structure 2.0 tracks swing points and tells you when they actually break—not when a wick pokes through, but when price closes beyond the level. That close is what matters.
CHoCH (Change of Character) – Your signal that trend direction may be flipping. If price has been making lower lows then suddenly closes above a swing high, that's a CHoCH. Doesn't guarantee reversal, but the character of the move has shifted.
BOS (Break of Structure) – Confirms trend continuation. In an uptrend, when price closes above the previous swing high, that's a BOS. Buyers are still in control.
FTC (Failure to Close) – Price wicked beyond a pivot but couldn't close there. Someone defended that level. A warning sign that the move might stall or reverse.
External vs Internal Structure
External structure is your CTF (current timeframe) trend—the main swing points that define overall direction.
Internal structure tracks price action forming within the current pivot range. It auto-resets each time external structure breaks, keeping your chart clean.
External is more important for trend direction. Internal gives you insight into what's happening between those major swings—useful for timing entries on pullbacks.
The BOS Counter
A dashboard tracking consecutive BOS counts with color-coded trend state:
Green – Trending bullish, price holding above CHoCH level
Red – Trending bearish, price holding below CHoCH level
Gray – Sideways/ranging, price has crossed back through CHoCH but no new break yet
** Gray means caution—what was trending is now in question.
Premium & Discount Zones
Zones based on the range between the most recent external swing high and low:
Premium – Top 25%, look for shorts
Discount – Bottom 25%, look for longs
50% line – Equilibrium
** Optional alerts when price enters either zone.
What Makes This Different
Most pivot indicators mark swings after a fixed bar count. This indicator only confirms a pivot when price breaks structure the other way. That swing low isn't real until price closes above the swing high. Until then, it shows faded—potential, not confirmed.
Every element is fully customizable—colors, styles, labels, positioning. Make it fit your setup.
━━━━━━━━━━━━━━━━━━━━━━
Features v2.0
Automatic swing high and swing low detection
Structure-based pivot confirmation (closes beyond level, not fixed lookback)
Customizable pivot markers (style, size, colors)
Adjustable swing width sensitivity
Dual-layer analysis (External CTF trend + Internal structure within pivot range)
BOS lines for trend continuation
CHoCH lines for potential reversals
FTC lines for failed breakouts / level rejections
Fully customizable structure lines (colors, styles, widths, labels)
Real-time BOS counter dashboard with trend state (trending vs sideways)
Premium zone (upper 25% of range)
Discount zone (lower 25% of range)
50% equilibrium line
Zone entry alerts (Premium & Discount)
Internal structure auto-resets on external breaks
Provisional structure lines (live preview before bar close)
Unconfirmed pivots displayed faded until validated
━━━━━━━━━━━━━━━━━━━━━━
Disclaimer : This script is provided for educational and informational purposes only. It is not financial advice and does not constitute a recommendation to buy or sell any financial instrument. Always do your own research and trade at your own risk.
The Bubble Strategy By HoneyMoneyFX🟢 The Bubble Strategy by HoneyMoneyFX
The Bubble Strategy is built to help traders instantly understand market bias across multiple timeframes, allowing for clearer, faster, and more confident trading decisions — without constantly switching charts.
🔍 Multi-Timeframe Info Panels
The indicator displays info panels for multiple timeframes at once, showing whether each timeframe is in:
LONG (bullish)
SHORT (bearish)
CONSOLIDATION
This makes it easy to see the overall structure and direction of price, helping traders align lower-timeframe entries with higher-timeframe momentum.
🎯 Buy & Sell Signals (High-Probability Entries)
Buy and Sell signals appear only when price enters both:
a 4H Bubble
and a 15-Minute Bubble
of the same type (both LONG or both SHORT)
This ensures signals are taken in the direction of higher-timeframe bias, not against it.
Signal Logic
BUY signal → 4H LONG + 15m LONG
SELL signal → 4H SHORT + 15m SHORT
🛑 Risk Management (Fixed & Simple)
Stop-Loss: EMA 200 (purple line)
Base Risk-Reward Ratio: 2.0R
This keeps risk management consistent and rule-based.
📈 Risk-Reward Scaling with Confluence
The strategy allows higher risk-reward when market conditions are stronger.
RSI Rules
LONG positions
RSI must be below 61
RSI above 61 is considered overbought, weakening the setup
SHORT positions
RSI must be above 39
RSI below 39 is considered oversold, weakening the setup
Examples
Best-case scenario
All info panels from 1m → 4H are GREEN
RSI across panels is below 61
👉 Risk-Reward of 4.0R or more is possible
Standard setup
Only 4H and 15m panels align
Average RSI below 61 (for longs)
👉 Risk-Reward = 2.0R
More alignment = stronger move = higher potential reward.
⚠️ Important Trading Rule
It is strongly recommended to:
Trade ONLY inside 4H LONG or SHORT bubbles
NEVER trade during 4H CONSOLIDATION bubbles
This dramatically reduces false signals and improves consistency.
📚 Education & Strategy Guides
Detailed guides on how to correctly use the Bubble Strategy will be posted on:
TikTok
YouTube
Instagram
These guides will teach you how to:
Filter real signals from fake ones
Trade scalping and swing setups
Combine info panels, RSI, and structure properly
🌍 Markets Supported
The Bubble Strategy works on:
✅ Forex (especially optimized)
✅ Stocks
✅ Crypto
Usable for scalping, day trading, and swing trading.
🔓 Access & Trial
You can freely use The Bubble Strategy by purchasing access at:
👉 honeymoneyfx.com
Includes a 30-day free trial
Full access to all features during the trial
----------------------------------------------------------
Desclaimer -
Trading in financial markets involves significant risk and is not suitable for everyone.
The Bubble Strategy by HoneyMoneyFX is provided for educational and informational purposes only and does not constitute financial advice, investment advice, or a recommendation to buy or sell any financial instrument.
Past performance is not indicative of future results. Market conditions change, and no strategy can guarantee profits or eliminate risk entirely. Losses can exceed expectations if proper risk management is not applied.
All Buy and Sell signals generated by this indicator should be independently verified and used at your own discretion. You are fully responsible for your trading decisions, including risk sizing, stop-loss placement, and trade execution.
This indicator does not account for personal financial circumstances, risk tolerance, or trading experience. Always trade with capital you can afford to lose.
It is strongly recommended to:
Backtest the strategy thoroughly
Use proper risk management at all times
Avoid trading during unfavorable market conditions
By using this indicator, you acknowledge that HoneyMoneyFX and its affiliates are not liable for any losses, damages, or financial outcomes resulting from its use.
HiMAC Basic v2.3.2HiMAC Basic v2.2.3 - Indicator Brief Description
Core Concept:
HiMAC (High-Probability MACD) is a multi-timeframe confluence trading indicator that identifies high-probability reversal signals using MACD histogram patterns combined with RSI and Doji filtering.
Key Features:
1. Signal Detection Logic:
- Dark MACD Bar Sequencing: Tracks consecutive expanding MACD histogram bars
- Pair Validation: Requires 2 consecutive dark bars of same color
- Immediate Stop: Stops checking after first valid signal pair (C1-C2, C2-C3, or C3-C4)
2. Smart Filtering:
- RSI Validation: Blocks overbought/oversold signals (70/30 levels)
- Doji Filtering: Excludes signals with Doji candles (body <15% of range)
- Signal Lockout: 2-bar cooldown after each signal to prevent overlap
How It Works:
Signal Conditions (BULLISH):
- Two consecutive dark green MACD bars
- Both corresponding candles are green (close ≥ open)
- Neither candle is a Doji
- RSI not ≥ 70 (not overbought)
- Signals below bar for long entries
Signal Conditions (BEARISH):
- Two consecutive dark red MACD bars
- Both corresponding candles are red (close < open)
- Neither candle is a Doji
- RSI not ≤ 30 (not oversold)
- Signals above bar for short entries
Visual Components:
- Green Triangle ▼ = Bullish signal (below bar)
- Red Triangle ▲ = Bearish signal (above bar)
- Green Line = Bullish entry price (solid)
- Red Line = Bearish entry price (dashed)
- Status Table = Real-time system status
Use Case:
Best for: Swing trading on H1-H4 timeframes with Daily trend alignment
Markets: Forex, Crypto, Indices (works best with trending instruments)
Style: Counter-trend within larger trend (pullback entries)
TDKM V.5.1An arrow appears when there is a trade signal. Buy according to the buy signal, sell according to the sell signal.
Green Pen RN Day Box ATH V2.2 OptimizedGreen Pen V2.2 Optimized is a comprehensive "All-in-One" trading system designed for Price Action traders. It combines powerful pattern recognition (PAT), psychological levels (RN), daily range analysis (Day Box), and All-Time High (ATH) tracking into a single, highly optimized tool.
Supply & Demand Sniper369Indicator Philosophy: The Convergence of Structure and Liquidity
The Supply & Demand Sniper369 is not just another signal generator; it is a professional-grade execution framework built on the principles of Institutional Order Flow and Liquidity Engineering. While standard indicators often lag or provide signals in "no-man's land," this script is designed to identify high-probability reversal points by combining macro-structural zones with micro-execution triggers.
What Makes This Script Original?
Most scripts treat Supply/Demand and Entry Triggers as separate entities. The originality of the Sniper369 lies in its Strict Hierarchical Logic. It employs a "Two-Factor Authentication" system for trades:
1. Structural Validation: Identifying where "Smart Money" has historically left unfilled orders.
2. Liquidity Sweep Confirmation: Using the Enigma 369 logic to detect a specific manipulation pattern (a stop-run or "sweep") that occurs exclusively within those structural zones.
By using Pine Script v6 Object-Oriented Programming, the script manages dynamic arrays of boxes and lines that auto-delete upon mitigation, ensuring your chart remains a clean, actionable workspace.
Underlying Concepts & Calculations
1. Macro: Structural Supply & Demand
The indicator calculates zones based on Pivot Strength and Volatility Scaling.
Calculations: It scans for major structural pivots ( and ). Once a pivot is confirmed, it doesn't just draw a line; it calculates a zone width based on the Average True Range (ATR).
Why it works: Institutions do not enter at a single price; they enter in "pockets" of liquidity. Using ATR-based zones ensures that on high-volatility pairs (like Gold or GBP/JPY), your zones are appropriately wide, while on lower-volatility pairs, they remain tight and precise.
2. Micro: The Enigma 369 Sniper Logic
Once price enters a zone, the "Sniper" logic activates. This is based on the Institutional Wick-Liquidity concept.
The Sweep: The script looks for a candle that breaks the high/low of the previous candle (trapping "breakout" traders) but fails to hold that level.
The Mean Threshold (50% Wick): A core calculation of the Enigma logic is the midpoint of the rejection wick.
Calculation: for Sells.
Logic: Institutions often re-test the 50% level of a long wick to fill the remaining orders before the real move starts.
How to Use the Indicator
Step 1: Wait for Structural Alignment
Observe the Teal (Demand) and Red (Supply) boxes. These are your "Points of Interest" (POI). Do not take any trades until the price is physically touching or inside these boxes.
Step 2: Monitor for the Sniper Trigger
When the price is inside a zone, look for the appearance of the Solid and Dotted lines.
The Solid Line: This is the extreme of the manipulation candle. It serves as your structural invalidation level (Stop Loss).
The Dotted Line: This is the 50% Wick level. It is your "Sniper Entry" target.
Step 3: Execution & Alerts
The script features a built-in alert system that notifies you the moment a Sniper activation occurs inside a zone.
Conservative Entry: Place a Limit Order at the Dotted Line.
Aggressive Entry: Market enter on the close of the Sniper candle if the price has already reacted strongly.
Exit: Target the opposing Supply or Demand zone for a high Risk-to-Reward ratio.
Technical Summary for Traders
Trend Detection: Uses an EMA-50 Filter to ensure Snipers only fire in the direction of the dominant trend (optional).
Scalping/Day Trading: Optimized for the 1m, 5m, and 15m timeframes, but functions perfectly on 4H/Daily for swing traders.
Dynamic Cleanup: The script automatically deletes lines if the price closes past them, signaling that the "Liquidity Grab" was actually a breakout, thus preventing you from entering a losing trade.
Breaker Blocks Finder | Gold | ProjectSyndicateProjectSyndicate Breaker Blocks Finder
📊 Overview
The ProjectSyndicate Breaker Blocks Finder (PS BB Finder) is a professional-grade Pine Script indicator designed to detect and display Bullish and Bearish Breaker Blocks based on Smart Money Concepts (SMC) methodology. This indicator is specifically optimized for XAUUSD (Gold) trading but works reliably across all symbols and timeframes.
Key Features
✅ Non-Repainting: Breaker blocks never change position after formation
✅ Multi-Timeframe Support: Optimized for M5, M10, M15, M20, M30, and H1
✅ Highly Customizable: 10+ user-configurable settings
✅ Visual Clarity: Color-coded boxes and labels for easy identification
✅ Performance Optimized: Handles 1000+ candles without lag
✅ Cross-Symbol Compatible: Works on Forex, Crypto, Stocks, Indices, and Commodities
✅ Displacement Detection: Uses ATR-based displacement to filter false signals
🎯 What are Breaker Blocks?
A Breaker Block is a failed order block that becomes a new support or resistance zone after being invalidated by price. It represents a market structure shift where institutional traders (smart money) have flipped their position.
Bullish Breaker Block
A Bullish Breaker Block forms when:
1 A bearish order block (resistance zone) exists
2 Price breaks ABOVE this zone with strong displacement
3 The former resistance zone now becomes SUPPORT
4 Price may retest this zone before continuing higher
Visual: Green box with "BB ▲" label
Bearish Breaker Block
A Bearish Breaker Block forms when:
5 A bullish order block (support zone) exists
6 Price breaks BELOW this zone with strong displacement
7 The former support zone now becomes RESISTANCE
8 Price may retest this zone before continuing lower
Visual: Red box with "BB ▼" label
⚙️ Default Settings
Setting Default Range Description
Lookback Period 1000 100-5000 Number of historical candles to analyze
Max Breaker Blocks 5 1-50 Maximum number of breaker blocks to display
Swing Detection Length 10 2-20 Bars on each side to confirm swing high/low. Higher = more significant swings
Use Displacement Filter true true/false Enable to filter breaker blocks by displacement size
Displacement Multiplier 2.0 0.5-5.0 Minimum move size as multiple of ATR. Higher = stricter detection
Invalidation Method Close Close/Wick Close = Conservative (candle must close beyond zone)Wick = Aggressive (wick touch is enough)
📈 Recommended Timeframes & Settings
This indicator is optimized for the following timeframes. Use these settings as a starting point.
Lower Timeframes (M5, M10, M15, M20)
These settings are designed to capture faster price movements and are the default settings for the indicator.
Setting Recommended Value
Lookback Period 1000
Max Breaker Blocks 5
Swing Detection Length 10
Use Displacement Filter true
Displacement Multiplier 2.0
Invalidation Method Close
Higher Timeframes (M30, H1)
For these timeframes, a less strict displacement filter is recommended to capture more significant, but less frequent, breaker blocks.
Setting Recommended Value
Lookback Period 1000
Max Breaker Blocks 5
Swing Detection Length 10
Use Displacement Filter true
Displacement Multiplier 1.0
Invalidation Method Close
🎓 How to Use
Step 1: Identify Breaker Blocks
Once the indicator is loaded, breaker blocks will automatically appear on your chart:
• Green boxes = Bullish breaker blocks (former resistance, now support)
• Red boxes = Bearish breaker blocks (former support, now resistance)
Step 2: Wait for Retest
The most reliable trading opportunities occur when price retests the breaker block zone:
• For bullish breaker blocks, wait for price to come back down to the green zone
• For bearish breaker blocks, wait for price to come back up to the red zone
Step 3: Look for Confluence
Combine breaker blocks with other SMC concepts for higher probability setups:
• Fair Value Gaps (FVG) within the breaker block zone
• Liquidity grabs before the retest
• Break of Structure (BoS) or Change of Character (ChoCH) confirmation
Step 4: Enter the Trade
Bullish Setup:
• Entry: At or near the bullish breaker block zone
• Stop Loss: Below the breaker block
• Take Profit: Previous swing high or higher
Bearish Setup:
• Entry: At or near the bearish breaker block zone
• Stop Loss: Above the breaker block
• Take Profit: Previous swing low or lower
🛡️ Non-Repainting Guarantee
This indicator is 100% non-repainting, meaning:
✅ Breaker blocks never change position after formation
✅ Historical breaker blocks remain in the exact same location indefinitely
✅ Backtesting results are reliable and consistent
🐛 Troubleshooting
Issue: No Breaker Blocks Appearing
Solutions:
• Ensure "Use Displacement Filter" is enabled.
• On M30/H1, try lowering the "Displacement Multiplier" to 1.0.
• Scroll back in history; blocks may not be present on the most recent bars.
Issue: Too Many Breaker Blocks
Solutions:
• Increase "Displacement Multiplier" to 2.5 or 3.0.
• Increase "Swing Detection Length" to 12-15.
• Decrease "Max Breaker Blocks" to 3-4.
Long + Short + Signal//@version=6
indicator("Long + Short + Signal", overlay=true)
Buy = input.bool(false, "Buy ")
Sell = input.bool(false, "Sell ")
// ================= INPUTS =================
// ---- LONG ----
periodK_Long = 50
smoothK_Long = 3
periodD_Long = 3
// ---- SHORT ----
periodK_Short = 14
smoothK_Short = 3
periodD_Short = 3
// ================= FUNCTIONS =================
f_stoch_long(tf) =>
k = request.security(syminfo.tickerid, tf,
ta.sma(ta.stoch(close, high, low, periodK_Long), smoothK_Long))
d = request.security(syminfo.tickerid, tf,
ta.sma(k, periodD_Long))
k > 50 and d > 50 ? color.green : k < 40 and d < 40 ? color.red : color.gray
f_stoch_short(tf) =>
k = request.security(syminfo.tickerid, tf,
ta.sma(ta.stoch(close, high, low, periodK_Short), smoothK_Short))
d = request.security(syminfo.tickerid, tf,
ta.sma(k, periodD_Short))
k > 60 and d > 60 ? color.green : k < 40 and d < 40 ? color.red : color.gray
// ================= TABLE =================
// 2 rows × 8 columns
var table t = table.new(position.top_right, 8, 2, border_width=3)
if barstate.islast
// ===== HEADINGS (BIGGER) =====
table.cell(
t, 0, 0, "Short",
bgcolor=color.black,
text_color=color.white,
text_size=size.large,
text_halign=text.align_center
)
table.cell(
t, 0, 1, "Long",
bgcolor=color.black,
text_color=color.white,
text_size=size.large,
text_halign=text.align_center
)
// ===== LONG ROW =====
table.cell(t, 1, 0, "1m", bgcolor=f_stoch_short("1"), text_color=color.white, text_size=size.normal)
table.cell(t, 2, 0, "5m", bgcolor=f_stoch_short("5"), text_color=color.white, text_size=size.normal)
table.cell(t, 3, 0, "15m", bgcolor=f_stoch_short("15"), text_color=color.white, text_size=size.normal)
table.cell(t, 4, 0, "60m", bgcolor=f_stoch_short("60"), text_color=color.white, text_size=size.normal)
table.cell(t, 5, 0, "D", bgcolor=f_stoch_short("D"), text_color=color.white, text_size=size.normal)
table.cell(t, 6, 0, "W", bgcolor=f_stoch_short("W"), text_color=color.white, text_size=size.normal)
table.cell(t, 7, 0, "M", bgcolor=f_stoch_short("M"), text_color=color.white, text_size=size.normal)
// ===== SHORT ROW =====
table.cell(t, 1, 1, "1m", bgcolor=f_stoch_long("1"), text_color=color.white, text_size=size.normal)
table.cell(t, 2, 1, "5m", bgcolor=f_stoch_long("5"), text_color=color.white, text_size=size.normal)
table.cell(t, 3, 1, "15m", bgcolor=f_stoch_long("15"), text_color=color.white, text_size=size.normal)
table.cell(t, 4, 1, "60m", bgcolor=f_stoch_long("60"), text_color=color.white, text_size=size.normal)
table.cell(t, 5, 1, "D", bgcolor=f_stoch_long("D"), text_color=color.white, text_size=size.normal)
table.cell(t, 6, 1, "W", bgcolor=f_stoch_long("W"), text_color=color.white, text_size=size.normal)
table.cell(t, 7, 1, "M", bgcolor=f_stoch_long("M"), text_color=color.white, text_size=size.normal)
lengthK = 14
lengthD = 3
lengthEMA = 3
emaEma(source, length) => ta.ema(ta.ema(source, length), length)
highestHigh = ta.highest(lengthK)
lowestLow = ta.lowest(lengthK)
highestLowestRange = highestHigh - lowestLow
relativeRange = close - (highestHigh + lowestLow) / 2
smi = 200 * (emaEma(relativeRange, lengthD) / emaEma(highestLowestRange, lengthD))
// ===== BUY / SELL CONDITIONS =====
buyEntry = ta.crossover(smi, 50)
buyExit = ta.crossunder(smi, 50)
sellEntry = ta.crossunder(smi, -40)
sellExit = ta.crossover(smi, -40)
// ===== PLOTS =====
plotshape( Buy and buyEntry, title="BUY", style=shape.triangleup,location=location.belowbar, color=color.green,size=size.small, text="BUY")
plotshape( Buy and buyExit, title="EXIT BUY", style=shape.triangledown, location=location.abovebar, color=color.lime,size=size.tiny, text="EXIT")
plotshape( Sell and sellEntry,title="SELL", style=shape.triangledown, location=location.abovebar, color=color.red, size=size.small, text="SELL")
plotshape( Sell and sellExit, title="EXIT SELL", style=shape.triangleup, location=location.belowbar, color=color.orange, size=size.tiny, text="EXIT")
shortest = ta.ema(close, 9)
shortEMA = ta.ema(close, 21)
longer = ta.ema(close, 50)
longest = ta.ema(close, 200)
plot(shortest, color=color.red, title="EMA 9")
plot(shortEMA, color=color.orange, title="EMA 21")
plot(longer, color=color.aqua, title="EMA 50")
plot(longest, color=color.blue, title="EMA 200")
Range Marker by Vinay SinghThis indicator marks back and forth range on given timeframes. good indicator to test range breakout.
keke[xinhao2hao]Effective things are always simple, and their maximum value primarily relies on how users apply them.
往旆有效的东西都是简单的
主要依靠使用者的使用方案决定最大价值
