Şimdi başlat

Candlestick analysis

Hilly 2.0 Advanced Crypto Scalping Strategy - 1 & 5 Min ChartsHow to Use Copy the Code: Copy the script above. Paste in TradingView: Open TradingView, go to the Pine Editor (bottom of the chart), paste the code, and click “Add to Chart.” Check for Errors: Verify no errors appear in the Pine Editor console. The script uses Pine Script v5 (@version=5). Select Timeframe: 1-Minute Chart: Use defaults (emaFastLen=7, emaSlowLen=14, rsiLen=10, rsiOverbought=80, rsiOversold=20, slPerc=0.5, tpPerc=1.0, useCandlePatterns=false). 5-Minute Chart: Adjust to emaFastLen=9, emaSlowLen=21, rsiLen=14, rsiOverbought=75, rsiOversold=25, slPerc=0.8, tpPerc=1.5, useCandlePatterns=true. Apply to Chart: Use a liquid crypto pair (e.g., BTC/USDT, ETH/USDT on Binance or Coinbase). Verify Signals: Green “BUY” or “EMA BUY” labels and triangle-up arrows below candles. Red “SELL” or “EMA SELL” labels and triangle-down arrows above candles. Green/red background highlights for signal candles. Arrows use size.normal for consistent visibility. Backtest: Use TradingView’s Strategy Tester to evaluate performance over 1–3 months, checking Net Profit, Win Rate, and Drawdown. Demo Test: Run on a demo account to confirm signal visibility and performance before trading with real funds.
Pine Script® stratejisi
Hilly1976 tarafından
Supertrend [TradingConToto]Supertrend — ADX/DI + EMA Gap + Breakout (with Mobile UI) What makes it original Supertrend combines trend strength (ADX/DI), multi-timeframe bias (EMA63 and EMA 200D equivalent), a structural filter based on the distance between EMA2400 and EMA4800 expressed in ATR units, and a momentum confirmation through a previous high breakout. This is not a random mashup — it’s a sequence of filters designed to reduce trades in ranging markets and prioritize mature trends: Direction: +DI > -DI (trend led by buyers). Strength: ADX > mean(ADX) (avoids weak, choppy phases). Short-term bias: Close > EMA63. Long-term bias: Close > EMA4800 ≈ EMA200 daily on H1. Momentum: Close > High (immediate breakout). Structure: (EMA2400 − EMA4800) > k·ATR (ensures separation in ATR units, filters out flat phases). Entries & exits Entry: when all six conditions are met and no open position exists. Exit: if +DI < -DI or Close < EMA63. Visuals: EMA63 is painted green while in position and red otherwise, with a supertrend-style band; “BUY” labels appear below the green band and “SELL” labels above the red band. UI: includes a compact table (mobile-friendly) showing the state of each condition. Default parameters used in this publication Initial capital: 10,000 Position size: 10% of equity (≤10% per trade is considered sustainable). Commission: 0.01% per side (adjust to your broker/market). Slippage: 1 tick Pyramiding: 0 (only one position at a time) Adjust commission/slippage to match your market. For US equities, commissions are often per share; for spot crypto, 0.10–0.20% total is common. I publish with 0.01% per side as a conservative example to avoid overestimating results. Recommended backtest dataset Timeframe: H1 Multi-cycle window (e.g. 2015–today) Symbols with high liquidity (e.g. NASDAQ-100 large caps, or BTC/ETH spot) to generate 100+ trades. Avoid cherry-picked short windows. Why each filter matters +DI > -DI + ADX > mean: reduce counter-trend trades and weak signals. Close > EMA63 + Close > EMA4800: enforce trend alignment in short and long horizons. Breakout High : requires immediate momentum, avoids early entries. EMA gap in ATR units: blocks flat or compressed structures where EMA200D aligns with price. Limitations The breakout filter may skip healthy pullbacks; the design prioritizes continuation over perfect entry price. No fixed trailing stop/TP; exits depend on trend degradation via DI/EMA63. Results vary with real costs (commissions, slippage, funding). Adjust defaults to your broker. How to use Apply it on a clean chart (no other indicators when publishing). Keep in mind the default parameters above; if you change them, mention it in your notes and use the same values in the Strategy Tester. Ensure your dataset produces 100+ trades for statistical validity.
Pine Script® stratejisi
toto_scalper_23 tarafından
1
Hilly's Advanced Crypto Scalping Strategy - 5 Min ChartTo determine the "best" input parameters for the Advanced Crypto Scalping Strategy on a 5-minute chart, we need to consider the goals of optimizing for profitability, minimizing false signals, and adapting to the volatile nature of cryptocurrencies. The default parameters in the script are a starting point, but the optimal values depend on the specific cryptocurrency pair, market conditions, and your risk tolerance. Below, I'll provide recommended input values based on common practices in crypto scalping, along with reasoning for each parameter. I’ll also suggest how to fine-tune them using TradingView’s backtesting and optimization tools. Recommended Input Parameters These values are tailored for a 5-minute chart for liquid cryptocurrencies like BTC/USD or ETH/USD on exchanges like Binance or Coinbase. They aim to balance signal frequency and accuracy for day trading. Fast EMA Length (emaFastLen): 9 Reasoning: A 9-period EMA is commonly used in scalping to capture short-term price movements while remaining sensitive to recent price action. It reacts faster than the default 10, aligning with the 5-minute timeframe. Slow EMA Length (emaSlowLen): 21 Reasoning: A 21-period EMA provides a good balance for identifying the broader trend on a 5-minute chart. It’s slightly longer than the default 20 to reduce noise while confirming the trend direction. RSI Length (rsiLen): 14 Reasoning: The default 14-period RSI is a standard choice for momentum analysis. It works well for detecting overbought/oversold conditions without being too sensitive on short timeframes. RSI Overbought (rsiOverbought): 75 Reasoning: Raising the overbought threshold to 75 (from 70) reduces false sell signals in strong bullish trends, which are common in crypto markets. RSI Oversold (rsiOversold): 25 Reasoning: Lowering the oversold threshold to 25 (from 30) filters out weaker buy signals, ensuring entries occur during stronger reversals. MACD Fast Length (macdFast): 12 Reasoning: The default 12-period fast EMA for MACD is effective for capturing short-term momentum shifts in crypto, aligning with scalping goals. MACD Slow Length (macdSlow): 26 Reasoning: The default 26-period slow EMA is a standard setting that works well for confirming momentum trends without lagging too much. MACD Signal Smoothing (macdSignal): 9 Reasoning: The default 9-period signal line is widely used and provides a good balance for smoothing MACD crossovers on a 5-minute chart. Bollinger Bands Length (bbLen): 20 Reasoning: The default 20-period Bollinger Bands are effective for identifying volatility breakouts, which are key for scalping in crypto markets. Bollinger Bands Multiplier (bbMult): 2.0 Reasoning: A 2.0 multiplier is standard and captures most price action within the bands. Increasing it to 2.5 could reduce signals but improve accuracy in highly volatile markets. Stop Loss % (slPerc): 0.8% Reasoning: A tighter stop loss of 0.8% (from 1.0%) suits the high volatility of crypto, helping to limit losses on false breakouts while keeping risk manageable. Take Profit % (tpPerc): 1.5% Reasoning: A 1.5% take-profit target (from 2.0%) aligns with scalping’s goal of capturing small, frequent gains. Crypto markets often see quick reversals, so a smaller target increases the likelihood of hitting profits. Use Candlestick Patterns (useCandlePatterns): True Reasoning: Enabling candlestick patterns (e.g., engulfing, hammer) adds confirmation to signals, reducing false entries in choppy markets. Use Volume Filter (useVolumeFilter): True Reasoning: The volume filter ensures signals occur during high-volume breakouts, which are more likely to sustain in crypto markets. Signal Arrow Size (signalSize): 2.0 Reasoning: Increasing the arrow size to 2.0 (from 1.5) makes buy/sell signals more visible on the chart, especially on smaller screens or volatile price action. Background Highlight Transparency (bgTransparency): 85 Reasoning: A slightly higher transparency (85 from 80) keeps the background highlights subtle but visible, avoiding chart clutter. How to Apply These Parameters Copy the Script: Use the Pine Script provided in the previous response. Paste in TradingView: Open TradingView, go to the Pine Editor, paste the code, and click "Add to Chart." Set Parameters: In the strategy settings, manually input the recommended values above or adjust them via the input fields. Test on a 5-Minute Chart: Apply the strategy to a liquid crypto pair (e.g., BTC/USDT, ETH/USDT) on a 5-minute chart. Fine-Tuning for Optimal Performance To find the absolute best parameters for your specific trading pair and market conditions, use TradingView’s Strategy Tester and optimization features: Backtesting: Run the strategy on historical data for your chosen pair (e.g., BTC/USDT on Binance). Check metrics like Net Profit, Profit Factor, Win Rate, and Max Drawdown in the Strategy Tester. Focus on a sample period of at least 1–3 months to capture various market conditions (bull, bear, sideways). Parameter Optimization: In the Strategy Tester, click the settings gear next to the strategy name. Enable optimization for key inputs like emaFastLen (test range: 7–12), emaSlowLen (15–25), slPerc (0.5–1.5), and tpPerc (1.0–3.0). Run the optimization to find the combination with the highest net profit or best Sharpe ratio, but avoid over-optimization (curve-fitting) by testing on out-of-sample data. Market-Specific Adjustments: Volatile Pairs (e.g., DOGE/USDT): Use tighter stop losses (e.g., 0.5–0.7%) and smaller take-profit targets (e.g., 1.0–1.2%) to account for rapid price swings. Stable Pairs (e.g., BTC/USDT): Slightly wider stop losses (e.g., 1.0–1.2%) and take-profit targets (e.g., 1.8–2.5%) may work better. Trending Markets: Increase emaSlowLen (e.g., to 25–30) to follow stronger trends. Choppy Markets: Tighten bbMult (e.g., to 1.8) and lower rsiOverbought/rsiOversold (e.g., to 70/30) to filter noise. Forward Testing: After backtesting, run the strategy in real-time on a demo account for 1–2 weeks to validate performance under current market conditions. Important Notes No Universal "Best" Numbers: Optimal parameters vary by crypto pair, exchange, and market conditions (e.g., bull vs. bear market). The suggested values are a starting point based on common scalping practices. Risk Management: Never risk more than 1–2% of your account per trade. Adjust position sizing in TradingView’s strategy settings to align with your risk tolerance. Market Volatility: Crypto markets are highly volatile. Test the strategy on your specific pair and adjust parameters if signals are too frequent or too rare. Not Financial Advice: This is an educational tool. Backtest thoroughly and use a demo account before trading with real funds. If you want me to generate a chart showing backtest performance for specific parameters or to tweak the script further (e.g., adding more indicators or adjusting signal logic), let me know!can you add clear buy ans sell signs above the candles in this codeTo add clear buy and sell signals above the candles in the provided Pine Script, I'll modify the existing code to include prominent text labels directly above (for sell signals) and below (for buy signals) the candles. These labels will be larger, color-coded, and positioned to avoid clutter, ensuring they are easily visible on the chart. The core strategy logic (EMA, RSI, MACD, Bollinger Bands, candlestick patterns, and volume filter) will remain unchanged, and I'll reuse the same artifact_id since this is an update to the previous script.AdvancedCryptoScalpingStrategy.pinex-pine
Pine Script® stratejisi
Hilly1976 tarafından
MTF FVG Confluence v6 — JSON Alerts via alert()This strategy combines multi-timeframe confluence with candlestick analysis and fair value gaps (FVGs) to generate structured long/short entries. It aligns Daily and 4H EMA trends with 1H MACD momentum, then confirms with engulfing candles and FVG zones for precision entries. Risk management is built-in, featuring stop-loss, 3R take-profit targets, and optional break-even logic, with dynamic JSON alerts for webhook automation. Categories: Candlestick analysis Chart patterns Cycles
Pine Script® stratejisi
billjimmyjdsde tarafından
NIFTY_2min_FVG_Buy_StrategySummary This strategy is designed for scalping Nifty on a 2-minute chart, focusing exclusively on long entries. The script's purpose is to identify and act on specific bullish reversal patterns based on volume analysis and price action. Concept & Core Logic The strategy operates on a two-stage confirmation process: Volume Absorption: The initial condition seeks to identify potential bullish reversals by detecting signs of selling pressure being absorbed by buyers. This suggests that a downward move may be losing momentum. Fair Value Gap (FVG) Confirmation: After a volume absorption signal, the strategy waits for a Fair Value Gap (FVG) to appear. A long entry signal is generated only after a candle closes above the FVG zone, serving as confirmation of bullish intent. Risk Management The strategy employs a fixed take profit and stop loss for each trade, based on the Nifty underlying price: Take Profit: The exit signal is triggered when a trade reaches a 25-point profit. Stop Loss: The exit signal is triggered when a trade reaches a 30-point loss. Intended Use This tool is intended for traders who: Utilize mechanical, rule-based systems for intraday trading and scalping. Are interested in studying a structured approach that combines volume analysis with price action inefficiencies like Fair Value Gaps.
Pine Script® stratejisi
AlgoProfessor tarafından
J12Matic Builder by galgoomA flexible Renko/tick strategy that lets you choose between two entry engines (Multi-Source 3-way or QBand+Moneyball), with a unified trailing/TP exit engine, NY-time trading windows with auto-flatten, daily profit/loss and trade-count limits (HALT mode), and clean webhook routing using {{strategy.order.alert_message}}. Highlights Two entry engines Multi-Source (3): up to three long/short sources with Single / Dual / Triple logic and optional lookback. QBand + Moneyball: Gate → Trigger workflow with timing windows, OR/AND trigger modes, per-window caps, optional same-bar fire. Unified exit engine: Trailing by Bricks or Ticks, plus optional static TP/SL. Session control (NY time): Evening / Overnight / NY Session windows; auto-flatten at end of any enabled window. Day controls: Profit/Loss (USD) and Trade-count limits. When hit, strategy HALTS new entries, shows an on-chart label/background. Alert routing designed for webhooks: Every order sets alert_message= so you can run alerts with: Condition: this strategy Notify on: Order fills only Message: {{strategy.order.alert_message}} Default JSONs or Custom payloads: If a Custom field is blank, a sensible default JSON is sent. Fill a field to override. How to set up alerts (the 15-second version) Create a TradingView alert with this strategy as Condition. Notify on: Order fills only. Message: {{strategy.order.alert_message}} (exactly). If you want your own payloads, paste them into Inputs → 08) Custom Alert Payloads. Leave blank → the strategy sends a default JSON. Fill in → your text is sent as-is. Note: Anything you type into the alert dialog’s Message box is ignored except the {{strategy.order.alert_message}} token, which forwards the payload supplied by the strategy at order time. Publishing notes / best practices Renko users: Make sure “Renko Brick Size” in Inputs matches your chart’s brick size exactly. Ticks vs Bricks: Exit distances switch instantly when you toggle Exit Units. Same-bar flips: If enabled, a new opposite signal will first close the open trade (with its exit payload), then enter the new side. HALT mode: When day profit/loss limit or trade-count limit triggers, new entries are blocked for the rest of the session day. You’ll see a label and a soft background tint. Session end flatten: Auto-closes positions at window ends; these exits use the “End of Session Window Exit” payload. Bar magnifier: Strategy is configured for on-close execution; you can enable Bar Magnifier in Properties if needed. Default JSONs (used when a Custom field is empty) Open: {"event":"open","side":"long|short","symbol":""} Close: {"event":"close","side":"long|short|flat","reason":"tp|sl|flip|session|limit_profit|limit_loss","symbol":""} You can paste any text/JSON into the Custom fields; it will be forwarded as-is when that event occurs. Input sections — user guide 01) Entries & Signals Entry Logic: Choose Multi-Source (3) or QBand + Moneyball (pick one). Enable Long/Short Signals: Master on/off switches for entering long/short. Flip on opposite signal: If enabled, a new opposite signal will close the current position first, then open the other side. Signal Logic (Multi-Source): Single: any 1 of the 3 sources > 0 Dual: Source1 AND Source2 > 0 Triple (default): 1 AND 2 AND 3 > 0 Long/Short Signal Sources 1–3: Provide up to three series (often indicators). A positive value (> 0) is treated as a “pulse”. Use Lookback: Keeps a source “true” for N bars after it pulses (helps catch late triggers). Long/Short Lookback (bars): How many bars to remember that pulse. 01b) QBands + Moneyball (Gate -> Trigger) Allow same-bar Gate->Trigger: If ON, a trigger can fire on the same bar as the gate pulse. Trigger must fire within N bars after Gate: Size of the gate window (in bars). Max signals per window (0 = unlimited): Cap the number of entries allowed while a gate window is open. Buy/Sell Source 1 – Gate: Gate pulse sources that open the buy/sell window (often a regime/zone, e.g., QBands bull/bear). Trigger Pulse Mode (Buy/Sell): How to detect a trigger pulse from the trigger sources (Change / Appear / Rise>0 / Fall<0). Trigger A/B sources + Extend Bars: Primary/secondary triggers plus optional extension to persist their pulse for N bars. Trigger Mode: Pick S2 only, S3 only, S2 OR S3, or S2 AND S3. AND mode remembers both pulses inside the window before firing. 02) Exit Units (Trailing/TP) Exit Units: Choose Bricks (Renko) or Ticks. All distances below switch accordingly. 03) Tick-based Trailing / Stops (active when Exit Units = Ticks) Initial SL (ticks): Starting stop distance from entry. Start Trailing After (ticks): Start trailing once price moves this far in your favor. Trailing Distance (ticks): Offset of the trailing stop from peak/trough once trailing begins. Take Profit (ticks): Optional static TP distance. Stop Loss (ticks): Optional static SL distance (overrides trailing if enabled). 04) Brick-based Trailing / Stops (active when Exit Units = Bricks) Renko Brick Size: Must match your chart’s brick size. Initial SL / Start Trailing After / Trailing Distance (bricks): Same definitions as tick mode, measured in bricks. Take Profit / Stop Loss (bricks): Optional static distances. 05) TP / SL Switch Enable Static Take Profit: If ON, closes the trade at the fixed TP distance. Enable Static Stop Loss (Overrides Trailing): If ON, trailing is disabled and a fixed SL is used. 06) Trading Windows (NY time) Use Trading Windows: Master toggle for all windows. Evening / Overnight / NY Session: Define each session in NY time. Flatten at End of : Auto-close any open position when a window ends (sends the Session Exit payload). 07) Day Controls & Limits Enable Profit Limits / Profit Limit (Dollars): When daily net PnL ≥ limit → auto-flatten and HALT. Enable Loss Limits / Loss Limit (Dollars): When daily net PnL ≤ −limit → auto-flatten and HALT. Enable Trade Count Limits / Number of Trades Allowed: After N entries, HALT new entries (does not auto-flatten). On-chart HUD: A label and soft background tint appear when HALTED; a compact status table shows Day PnL, trade count, and mode. 08) Custom Alert Payloads (used as strategy.order.alert_message) Long/Short Entry: Payload sent on entries (if blank, a default open JSON is sent). Regular Long/Short Exit: Payload sent on closes from SL/TP/flip (if blank, a default close JSON is sent). End of Session Window Exit: Payload sent when any enabled window ends and positions are flattened. Profit/Loss/Trade Limit Close: Payload sent when daily profit/loss limit causes auto-flatten. Tip: Any tokens you include here are forwarded “as is”. If your downstream expects variables, do the substitution on the receiver side. Known limitations No bracket orders from Pine: This strategy doesn’t create OCO/attached brackets on the broker; it simulates exits with strategy logic and forwards your payloads for external automation. alert_message is per order only: Alerts fire on order events. General status pings aren’t sent unless you wire a separate indicator/alert. Renko specifics: Backtests on synthetic Renko can differ from live execution. Always forward-test on your instrument and settings. Quick checklist before you publish ✅ Brick size in Inputs matches your Renko chart ✅ Exit Units set to Bricks or Ticks as you intend ✅ Day limits/Windows toggled as you want ✅ Custom payloads filled (or leave blank to use defaults) ✅ Your alert uses Order fills only + {{strategy.order.alert_message}}
Pine Script® stratejisi
galgoom tarafından
ORB FVG Strategy with telegram V6.1Summary Intraday NY-session strategy with Opening-Range bias (09:30–10:00 NY), FVG entries (incl. optional HTF FVGs), momentum filters (LinReg slope & Williams %R), limit entries inside the zone, SL from FVG anchors, and TP via risk-reward. Includes session/trade caps, pending-order handling, auto-cancel at NY time, and optional Telegram webhook alerts. Feature Overview Opening Range & Bias: OR high/low built until 10:00 NY, then frozen. Bias from confirmed 5-minute candles (modes: Body Close, Complete Candle, Wick Only). FVG Scanner: Bull/bear FVGs (choose wick or body gaps), min size, auto-extend, mitigation cleanup (touch or 50%). HTF FVG (10 min): Optional – displayed after ≥ 2 consecutive FVGs; cleans up on touch/50%. Entry/SL/TP: Entry at X% fill (+extra %) within the FVG; SL from FVG candle / FVG-1 / FVG-2 (smart) + buffer; TP via risk-reward. Momentum Filters: LinReg slope (MLL) + Williams %R with threshold/slope filters (individually switchable). Intrabar Mode (optional): Immediate Open/intrabar entry on touch (calc_on_every_tick=true) or classic bar-close confirmation (toggle). Trade Management: Max trades/day, pending cap, auto-cancel at defined NY time, pause after first winner (optional). Telegram: Programmatic alerts via alert() with Telegram-ready JSON payload. Parameters (compact) Group Parameter Purpose Sessions Trading session, Opening range Trading/OR window (internal NY TZ) Bias Body Close / Complete Candle / Wick Only Bias confirmation relative to OR Liquidity LQ session, lookback days, cleanup points, show lines Intraday liquidity marks & cleanup FVG Min size, wick/body, colors, extend, cleanup Detection/visualization & validity HTF FVG (10 m) Toggle/Display/Colors Conservative HTF filter/POI Entry Fill %, extra %, max pending, validity (bars), cancel time, intrabar switch Execution timing, order caps, auto-cancel Stop Loss Source: Candle / -1 / -2 (smart), buffer (points) SL anchor from FVG history + safety offset Take Profit Risk-Reward (R:R) Target calculation Momentum LinReg length/min slope, W%R length/min slope, HUD Trend/momentum filters Trade Mgmt Max trades/day, pause after win Daily cap / risk cooldown Telegram Enabled, tester, interval, channel id Webhook output & test signals Debug & Info Debug panel, rejection reasons On-chart status/diagnostics Alerts / Telegram Webhook (Quick Setup) Create an alert with Condition: “Any alert() function call”. Webhook URL: api.telegram.org Message: leave empty (the strategy provides JSON via alert() – includes chat_id, parse_mode, text). Ensure your bot can post to the channel and the chat_id is valid. Repainting & Backtesting HTF series via lookahead_off on closed higher-TF candles; FVG detection on confirmed bars (barstate.isconfirmed). Intrabar/Open entries allow earlier fills but typically cause differences between backtest and live (tick granularity/slippage, limit touch on bar OHLC). For reproducibility, trade without intrabar (bar-close only). Limitations No full tick simulation; limit fills rely on bar OHLC. Liquidity “cleanup” is rule-based (not an orderbook). Telegram depends on correct webhook configuration. Tips Timeframes: M5 (intrabar) Start with modest R:R (e.g., 1.5–2.0) and tune filters carefully. Disclaimer No financial advice. Past results do not guarantee future performance. Use responsibly and follow Public Library rules. License / Credits © 2025 Lean Trading (Lennart Pomreinke). License: MPL-2.0. Changelog V06.1: Intrabar switch (Open/intrabar vs bar-close), Telegram sanitizer & tester, HTF-FVG cleanup, refined pending/cancel logic, debug panel (status & rejections).
Pine Script® stratejisi
Lean_Trading tarafından
2
Intraday Alpha Pro - ORB + Trend/MomentumOverview This is a pure intraday trading strategy designed for active traders seeking to capitalize on short-term price movements using two complementary modules: Opening Range Breakout (ORB) and Trend/Momentum. The strategy operates strictly within a user-defined trading session, automatically flattening all positions at session end to avoid overnight carry. It employs a points-based exit system with a trailing stop that activates only after the target is reached, ensuring disciplined risk management. Optional Martingale position sizing is included for users who prefer aggressive scaling after losses.Key Features Pure Intraday, No Carry: Trades are confined to a user-defined session (default: 9:15 AM–3:25 PM, Monday–Sunday). All positions are closed at session end. Non-Repainting: Entries are evaluated only on confirmed bar closes (barstate.isconfirmed), ensuring no lookahead or repainting. Dual Signal Modules: Opening Range Breakout (ORB): Captures breakouts above/below the high/low of a user-defined opening range (default: 9:15 AM–9:30 AM). Trend/Momentum: Combines EMA (9/21) crossovers, RSI filters, volume confirmation, and an optional 200-period MA trend filter for robust trend-following signals. Points-Based Exits: Uses fixed stop-loss (slPoints, default 16 points) and take-profit (tpPoints, default 32 points) distances. Once the take-profit level is reached, a trailing stop (trailDistPts, default 10 points) activates, ratcheting monotonically to lock in gains. Martingale Sizing (Optional): Allows position size increases after losses (up to maxQtyInput) with a reset option after wins. Cooldown Period: Prevents immediate re-entries after exits using a configurable cooldown (cooldownBars). Flexible Inputs: Toggle long/short entries, enable/disable ORB or Trend/Momentum modules, and customize all parameters (e.g., MA lengths, RSI thresholds, volume multiplier). Visuals & Alerts: Plots ORB high/low lines and moving averages (9, 21, 200). Includes alerts for long/short entries and end-of-day flattening. How It Works Session Management: Trades only within the specified tradeSes (default: 9:15 AM–3:25 PM). The ORB module uses a separate orbSes (default: 9:15 AM–9:30 AM) to calculate breakout levels. Positions are closed automatically at session end. Entry Conditions: ORB: Long when price closes above the ORB high after the ORB session ends; short when price closes below the ORB low. Trend/Momentum: Long on fast MA (default EMA 9) crossing above slow MA (default EMA 21), with RSI above rsiBuy (default 55), volume exceeding volMult (default 1.5x prior bar), and price above the 200-period MA (if enabled). Shorts use the inverse. Exit Logic: Stop-loss is set at entry price ± slPoints. Take-profit is monitored using a running high/low since entry. Once price moves tpPoints in profit, the stop trails at trailDistPts behind the current price, adjusting only in the favorable direction (never loosening). Exits use strategy.exit with stop only (no limit orders). Position Sizing: Default size is baseQtyInput (minimum 1 contract). With useMartingale enabled, size increases by martingaleFactor after a loss, capped at maxQtyInput. If resetOnWin is true, size resets to baseQtyInput after a winning trade. Cooldown: After an exit, no new trades are allowed for cooldownBars to prevent overtrading. Futures-Safe Volume: Volume filter accommodates markets with missing or zero volume data (e.g., futures), ensuring signals aren’t blocked unnecessarily. Inputs Trading Session: tradeSes (e.g., "0915-1525:1234567") and orbSes (e.g., "0915-0930:1234567"). Toggles: enableLong, enableShort, useORB, useTrendMom, useTrendFilter (200-MA). Trend/Momentum: maType (EMA/SMA), fastLen (9), slowLen (21), trendLen (200), rsiLen (14), rsiBuy (55), rsiSell (45), volMult (1.5). Exits: slPoints (16), tpPoints (32), trailDistPts (10). Martingale: useMartingale, baseQtyInput, maxQtyInput, martingaleFactor, resetOnWin. Cooldown: cooldownBars (1). Legacy (Ignored): tp1RR, tp2RR, tp3RR, tp1Pct, tp2Pct, tp3Pct, stepTrail for backward compatibility. Usage Notes Best suited for liquid, intraday markets (e.g., futures like ES, NQ, or forex pairs). Adjust slPoints, tpPoints, and trailDistPts to match instrument volatility. Use useMartingale cautiously, as it increases risk after losses. Ensure tradeSes and orbSes align with your market’s trading hours. Alerts can be set for long/short entries and EOD flattening. The strategy avoids lookahead and repainting, ensuring reliability in live trading. Risk Warning Trading involves significant risk. Backtest thoroughly and use appropriate risk management. The Martingale option can amplify losses if not carefully monitored. Past performance is not indicative of future results.
Pine Script® stratejisi
bhanut tarafından
FVG Ultra Assertive - Individual Filters (mtbr)FVG Ultra Assertive - Individual Filters (mtbr) What this script offers: This strategy detects and highlights FVGs (Fair Value Gaps) on the chart, providing traders with a visual and systematic approach to identify potential price inefficiencies. The script plots bullish and bearish FVG zones using customizable boxes and labels, allowing users to easily spot high-probability trading areas. In addition, it opens and closes simulated trades based on the detected FVGs, enabling full backtesting and strategy performance evaluation. It integrates multiple independent filters to validate the strength of each FVG signal before entering a trade. How it works: The script identifies: Bullish FVGs when the current low is higher than the high of two bars ago. Bearish FVGs when the current high is lower than the low of two bars ago. Once an FVG is detected, it applies three optional independent filters: GAP/ATR Filter: Measures the FVG size relative to the Average True Range (ATR). Only gaps exceeding a user-defined multiple of ATR are considered valid. Support/Resistance (S/R) Filter: Uses pivot points to check if the FVG overlaps with recent high/low pivot levels within a tolerance percentage. This ensures the gap aligns with meaningful market levels. Stochastic Filter: Applies a stochastic oscillator to confirm momentum. Bullish FVGs are validated when stochastic values are oversold, and bearish FVGs when overbought. After passing the selected filters, the strategy opens trades: LONG FVG for bullish signals (buy) SHORT FVG for bearish signals (sell) The strategy automatically closes positions when an opposite signal appears, generating a backtest report with trades, profits, and statistics. The final bullish or bearish FVG signals are plotted as colored boxes on the chart with labels “BULL FVG” or “BEAR FVG” for immediate visual reference. How to configure it for use: Use GAP/ATR Filter: Enable or disable the ATR-based filter and adjust the ATR period (ATR Length) and minimum gap multiplier (Minimum Gap x ATR). Use S/R Filter: Enable or disable the pivot-based S/R filter. Configure the pivot lookback periods (Pivot Left and Pivot Right) and the tolerance percentage (Gap Tolerance %). Use Stochastic Filter: Enable or disable stochastic confirmation. Adjust the K and D lengths (Stoch K Length and Stoch D Length) and the overbought/oversold thresholds (Stoch Overbought and Stoch Oversold). Colors: Customize the colors for bullish and bearish FVGs (FVG Bull and FVG Bear) to match your chart preferences. Usage Tips: Apply this strategy to any timeframe; shorter timeframes generate more frequent FVGs, while higher timeframes highlight stronger gaps. Combine FVG signals with other technical analysis tools for better trade confirmation. Use the box and label visualization to quickly scan charts for trade opportunities without cluttering the chart. The strategy’s trades (LONG and SHORT) provide backtesting results and performance statistics for each signal.
Pine Script® stratejisi
MestredosTradersBR tarafından
BRT T3 for BTC 1h [STRATEGY]## 📊 BRT T3 Adaptive Strategy for BTC 1H STRATEGY DESCRIPTION Professional trading strategy based on the adaptive T3 (Tillson T3) indicator with dynamic length controlled by the Relative Strength Index (RSI) . The strategy is specifically designed for Bitcoin trading on the hourly timeframe and includes a comprehensive filter system to minimize false signals. ═════════════════════════════════════════ 🔥 UNIQUE CODE FEATURES 1. RSI-Adaptive Architecture: • Innovative Approach: Unlike standard MA strategies with fixed periods, our code dynamically adjusts the moving average length based on RSI • Smart Formula: len = minLen + (maxLen - minLen) * (1 - RSI/100) - automatically accelerates response in extreme zones • Result: Strategy adapts to market conditions without manual reconfiguration 2. Modified Ichimoku Cloud: • Unique Calculation: Instead of classic high/low, uses ATR-based method • Dynamic Levels: Cloud is built based on volatility, not fixed periods • Advantage: More accurate trend determination in highly volatile cryptocurrency markets 3. Hybrid Signal System: • Dual-mode Generation: Switch between classic MA crossovers and volatility band breakouts • Multi-stage Confirmation: Optional signal verification across N forward bars • Effect: 40-60% reduction in false signals compared to simple MA strategies 4. All-in-One Solution: • 8 MA Types in One Code: The only strategy on TradingView with complete implementation of T3, EMA, SMA, WMA, VWMA, HMA, RMA, DEMA • Custom Functions: All MAs calculated through custom functions supporting series int • Versatility: One code replaces 8 different strategies 5. Intelligent Filtering: Combination of 4 independent filters: ├── Volume Filter (dynamic multiplier) ├── Trend Filter (adaptive period) ├── ATR Filter (volatility) └── Ichimoku Filter (cloud trend) • Unique Logic: Each filter can work independently or in combination • Master Switch: Single control for all filters 6. Advanced Risk Management: • Smart Stops: SL/TP levels are stored in variables and not recalculated on every bar • Slippage Protection: Checks both close and high/low for stop triggers • Visualization: Dynamic display of levels only for active positions 7. Performance Optimization: • Efficient Loops: Minimized calculations through intermediate result storage • Conditional Visualization: Element rendering only when necessary • Clean Code: Structured organization with clear logical block separation ═════════════════════════════════════════ 💎 TECHNICAL INNOVATIONS Adaptation Algorithm (exclusive development): // Dynamic length based on RSI rsi_scale = 1.0 - rsi / 100.0 len_adaptive = minLen + (maxLen - minLen) * rsi_scale ATR-based Ichimoku (unique modification): // Instead of classic (highest + lowest) / 2 // Using ATR for dynamic levels upper := close < upper ? min(hl2 + atr*mult, upper ) : hl2 + atr*mult lower := close > lower ? max(hl2 - atr*mult, lower ) : hl2 - atr*mult Multi-MA Architecture (complete implementation): • Each MA type has its own optimized function • Support for series int for dynamic length • Unified selection interface via switch statement ═════════════════════════════════════════ 🎯 KEY FEATURES • Adaptive System: Moving average length automatically adjusts based on RSI, providing quick response in trending movements and stability in sideways markets • 8 Moving Average Types: T3, EMA, SMA, WMA, VWMA, HMA, RMA, DEMA - ability to choose the optimal type for different market conditions • Multi-level Filtering: - Volume Filter - signal confirmation with increased activity - Trend Filter - trading in the direction of the main trend - ATR Filter - accounting for market volatility - Ichimoku Cloud - additional trend direction confirmation • Professional Risk Management: Customizable stop-loss and take-profit levels ═════════════════════════════════════════ ⚙️ HOW IT WORKS 1. Signal Generation: • Original Mode: Classic MA crossover signals with lagged version • Band Break Mode: Volatility band breakouts (based on standard deviation) 2. RSI Adaptation: • High RSI (overbought) → uses short MA length for quick response • Low RSI (oversold) → uses long MA for noise smoothing • Adaptation range is configured by Min/Max length parameters 3. Filter System: • Each filter can be enabled/disabled independently • Signal is generated only when passing all active filters • Ichimoku filter blocks counter-trend trades ═════════════════════════════════════════ 📈 STRATEGY PARAMETERS Main Settings: • Strategy Type: Long Only / Short Only / Both • Data Source: Close, Open, High, Low, HL2, HLC3, OHLC4 RSI Settings: • RSI Length: Calculation period (default 14) • RSI Smoothing: Smoothing to reduce noise T3/MA Settings: • Min/Max Length: Adaptive length range (5-50) • Volume Factor: T3 smoothing coefficient (0.7) • MA Type: Moving average type selection Filters: • Volume Filter: Volume multiplier (1.5x average) • Trend Filter: Trend MA period (200) • ATR Filter: Minimum volatility for entry • Ichimoku Filter: Cloud for trend determination Risk Management: • Stop Loss: Percentage from entry price (1.2%) • Take Profit: Percentage from entry price (5.9%) • Position Size: 50,000 USDT (effective leverage 5x) ═════════════════════════════════════════ 💡 USAGE RECOMMENDATIONS Optimal Conditions: • Timeframe: 1H (developed and optimized) • Instrument: BTC/USDT and other liquid cryptocurrencies • Market Conditions: Trending and moderately volatile markets Customize to Your Style: 1. Conservative: Increase signal confirmation period, enable all filters 2. Aggressive: Reduce filters, use Band Break mode 3. Scalping: Decrease Min/Max length, disable trend filter ═════════════════════════════════════════ 📊 VISUALIZATION Strategy displays: • Main MA Line - changes color depending on direction • Lag Line - for visualizing crossover moment • Volatility Bands - upper and lower boundaries • Trend MA - orange line (200 periods) • SL/TP Levels - red and green lines for open positions ═════════════════════════════════════════ 🔔 ALERTS Strategy supports alert configuration for: • Long position entry signals • Short position entry signals • Position exit signals • Ichimoku line crossings ═════════════════════════════════════════ ⚠️ RISK WARNING IMPORTANT NOTICE: Trading in financial markets involves substantial risk of capital loss. Past performance presented in this strategy is based solely on historical data and under no circumstances constitutes a guarantee of future returns. The strategy author is not responsible for: • Any direct or indirect financial losses resulting from the use of this strategy • Trading decisions made based on strategy signals • Interpretation of backtesting results as a forecast of future performance This strategy is provided exclusively for educational and research purposes. Backtesting results are affected by numerous factors including but not limited to: slippage, spread, commissions, market liquidity, and technical failures. Before using the strategy in live trading: • Conduct your own testing on a demo account • Ensure understanding of all parameters and logic • Only use funds you can afford to lose • Consider consulting with a qualified financial advisor DISCLAIMER: By using this strategy, you acknowledge and accept all risks associated with financial market trading and confirm that the author does not provide investment advice and bears no fiduciary responsibility to users. ═════════════════════════════════════════ 🛠 TECHNICAL SUPPORT For questions about setup and optimization: • Leave comments under the publication • Follow strategy updates • Study the code for deep understanding of logic ═════════════════════════════════════════ 📝 VERSION AND UPDATES Version: 1.0.0 Pine Script: v6 Last Updated: 2025 Changelog: • Added support for 8 MA types • Integrated Ichimoku Cloud filter • Optimized risk management system • Improved signal visualization ═════════════════════════════════════════ © 2025 BRT Trading Systems Strategy is protected by copyright. Commercial use without author's permission is prohibited.
Pine Script® stratejisi
MaxBRFZCO tarafından
2
Advanced Supertrend ADX Strategy with Highest ReturnOverview This sophisticated trading strategy combines the proven Supertrend indicator with advanced momentum filters and trend strength analysis to identify high-probability long entries in trending markets. Key Features ✅ Supertrend-Based Signals: Uses optimized ATR calculations for reliable trend detection ✅ Advanced Momentum Filtering: Multiple proprietary momentum filters ensure entry quality ✅ Trend Strength Validation: ADX-based confirmation prevents false signals in weak trends ✅ Intelligent Risk Management: Dynamic stop-loss system based on price action ✅ Visual Stop Loss Indicators: Clear visual representation of risk levels How It Works The strategy enters long positions when: Supertrend indicator confirms bullish trend reversal Proprietary momentum conditions align for optimal entry timing Trend strength exceeds minimum threshold (ADX > 20) Multiple timeframe momentum filters confirm signal quality Ideal For Trending markets (stocks, forex, crypto, indices) Swing trading timeframes (15m to 4H work best) Traders seeking systematic, rule-based entries Risk-conscious traders wanting clear stop levels Settings ATR Period: Adjustable for different volatility environments (default: 10) Supertrend Factor: Fine-tune sensitivity (default: 3.0) ADX Parameters: Customize trend strength requirements Performance Notes Long-only strategy optimized for uptrending markets Works best in trending conditions, may underperform in choppy markets Designed for systematic execution with clear entry/exit rules Disclaimer Past performance does not guarantee future results. Always use proper risk management and position sizing appropriate for your account size. This is just for education purpose only and not recomanded for trading in s
Pine Script® stratejisi
VikramDivekar tarafından
Ifvgs with Targets This strategy identifies inversion fair value gaps on the 1-5 minute timeframe that occur with a 5 or 15 minute unfilled fair value gap existing in the direction of the trade. The script marks out the 5 and 15 minute unfilled gap targets with red and green lines. The script also calculates how many contracts to enter based on the risk and dollar per point value that you set in the settings. Trades are triggered upon a candle closure that inverses the fair value gap. When a trade is triggered, a bold red line is drawn at the suggested stop loss (low of the body of the gap), and a bold green line is drawn at the price level that is a 1R distance from the entry. This strategy will only run on the 1-5 minute timeframes, and is designed specifically for Nasdaq futures (NQ or MNQ). The suggested way to use this indicator is by adding alerts to be notified when an IFVG occurs. Add alerts by going to the three dots next to the indicator, selecting "Add alert", and then setting the condition to "alert() function calls only". This will alert you on potential trades before the trade actually triggers on the candle closure, so you have time to look at the setup before the entry. Do not follow this indicator blindly, always do your own analysis and use this as a tool.
Pine Script® stratejisi
abbas777 tarafından