Monday Liquidity Sweep - WolfWeb

6 saat önce

⚡ 1. Liquidity Sweep Parameters (Wick-Extreme Logic)

These settings determine when the strategy detects a liquidity sweep through Monday’s high/low.

liqPct — Liquidity Sweep % of Wick Extreme

Default: 0.0002 (0.02%)

Minimum size the wick must extend above Monday’s high or below Monday’s low

Prevents tiny wiggles from counting as sweeps

Example:
If the sweep high (after Monday) is 1.20000
→ Wick must extend at least 1.20000 × 0.0002 = 0.00024 (2.4 pips)

maxWickPct — Max Wick % Allowed

Default: 0.0025 (0.25%)

If the wick is too big, it’s considered inefficient/noisy and skipped

Avoids entering after huge spikes that aren’t real liquidity grabs

slPct — SL Offset % of Wick Extreme

Default: 0.0002 (0.02%)

Stop loss is placed beyond the sweep wick by this percentage

Prevents immediate stop-outs from tiny spread/noise beyond the sweep point

Short example:
SL = wickHighExtreme + (wickHighExtreme × slPct)

Long example:
SL = wickLowExtreme – (wickLowExtreme × slPct)

⚡ 2. Risk Management Settings
riskUsd — Fixed Dollar Risk per Trade

Default: $100

Strategy automatically adjusts position size so that
max loss = $100

Regardless of SL distance, your dollar risk stays constant

rr — Reward/Risk Ratio (used for one TP scenario)

Default: 3.5

Minimum R multiple the strategy tries to achieve

If Monday range TP is smaller, strategy takes the larger TP

tpRangePct — TP % of Monday Range

Default: 130%

Final TP = max( 3.5R , 130% of Monday range )

Why?
Because sometimes Monday range is wide, and 3R is not enough contextually.

Examples:

Monday range = 50 pips → TP = 65 pips (because 130% > 3.5R? depends on risk)

Monday range = 10 pips → TP = whichever is larger (usually 3.5R)

This makes the strategy adapt to volatility differences week by week.

⚡ 3. Break-Even System (Two Conditions)

You have two independent BE triggers. If either hits, SL moves to a safe level.

BE Trigger Condition 1:

beRRTrigger — Break-Even Trigger in R Multiples
Default: 1.5

When the trade reaches +1.5R profit, we activate break-even logic.

BE Trigger Condition 2:

beBars — Break-Even After N Candles
Default: 24 bars

If trade doesn’t hit 1.5R but stays open long enough (24 candles),
SL moves to a break-even location.

This prevents trades from floating too long and reversing violently.

beLockFraction — Lock-In Fraction After BE

Default: 0.1
Meaning:

Once BE is triggered, SL moves to lock in 10% of the initial risk as profit.

Example:
Initial risk (entry→SL) = 20 pips
Lock fraction 0.1 → lock in 2 pips profit after BE activation.

This avoids pure breakeven (0 profit), which often gets wicked out.

⚡ 4. Monday + Time Logic
hourShift — Monday Start Shift

Default: 7 hours

Used to shift Monday start earlier/later depending on broker

Many forex brokers start the week late (Sunday evening).

This fixes the Monday box to real market structure.

Monday Box & Range

Strategy tracks Monday High & Low

Draws a box ONLY for Monday

Sweeps must occur after Monday

Entries must be back into the Monday range on next candle

⚡ 5. Session & Close Logic
nyOpenHour — New York Session Start Hour

Default: 14 (2 PM exchange time)

Friday Auto-Close

Any open trade is closed on Friday at:

NY Open + 2 hours


So with NY at 14 → auto-close at 16 (4 PM).

This protects from weekend gaps.

⚡ 6. Entry Mode
entryMode — “Tuesday Only” or “One Trade Per Week”

Tuesday Only → Strategy only enters on Tuesday

One Trade Per Week → Can enter any day after Monday, but only once per week

6 saat önce

Sürüm Notları

⚡ 1. Liquidity Sweep Parameters (Wick-Extreme Logic)

These settings determine when the strategy detects a liquidity sweep through Monday’s high/low.

liqPct — Liquidity Sweep % of Wick Extreme

Default: 0.0002 (0.02%)

Minimum size the wick must extend above Monday’s high or below Monday’s low

Prevents tiny wiggles from counting as sweeps

Example:
If the sweep high (after Monday) is 1.20000
→ Wick must extend at least 1.20000 × 0.0002 = 0.00024 (2.4 pips)

maxWickPct — Max Wick % Allowed

Default: 0.0025 (0.25%)

If the wick is too big, it’s considered inefficient/noisy and skipped

Avoids entering after huge spikes that aren’t real liquidity grabs

slPct — SL Offset % of Wick Extreme

Default: 0.0002 (0.02%)

Stop loss is placed beyond the sweep wick by this percentage

Prevents immediate stop-outs from tiny spread/noise beyond the sweep point

Short example:
SL = wickHighExtreme + (wickHighExtreme × slPct)

Long example:
SL = wickLowExtreme – (wickLowExtreme × slPct)

⚡ 2. Risk Management Settings
riskUsd — Fixed Dollar Risk per Trade

Default: $100

Strategy automatically adjusts position size so that
max loss = $100

Regardless of SL distance, your dollar risk stays constant

rr — Reward/Risk Ratio (used for one TP scenario)

Default: 3.5

Minimum R multiple the strategy tries to achieve

If Monday range TP is smaller, strategy takes the larger TP

tpRangePct — TP % of Monday Range

Default: 130%

Final TP = max( 3.5R , 130% of Monday range )

Why?
Because sometimes Monday range is wide, and 3R is not enough contextually.

Examples:

Monday range = 50 pips → TP = 65 pips (because 130% > 3.5R? depends on risk)

Monday range = 10 pips → TP = whichever is larger (usually 3.5R)

This makes the strategy adapt to volatility differences week by week.

⚡ 3. Break-Even System (Two Conditions)

You have two independent BE triggers. If either hits, SL moves to a safe level.

BE Trigger Condition 1:

beRRTrigger — Break-Even Trigger in R Multiples
Default: 3

When the trade reaches +3R profit, we activate break-even logic.

BE Trigger Condition 2:

beBars — Break-Even After N Candles
Default: 24 bars

If trade doesn’t hit 3R but stays open long enough (24 candles),
SL moves to a break-even location.

This prevents trades from floating too long and reversing violently.

beLockFraction — Lock-In Fraction After BE

Default: 2
Meaning:

Once BE is triggered, SL moves to lock in 200% of the initial risk as profit.

Example:
Initial risk (entry→SL) = 20 pips
Lock fraction 0.1 → lock in 2 pips profit after BE activation.

This avoids pure breakeven (0 profit), which often gets wicked out.

⚡ 4. Monday + Time Logic
hourShift — Monday Start Shift

Default: 7 hours

Used to shift Monday start earlier/later depending on broker

Many forex brokers start the week late (Sunday evening).

This fixes the Monday box to real market structure.

Monday Box & Range

Strategy tracks Monday High & Low

Draws a box ONLY for Monday

Sweeps must occur after Monday

Entries must be back into the Monday range on next candle

⚡ 5. Session & Close Logic
nyOpenHour — New York Session Start Hour

Default: 14 (2 PM exchange time)

Friday Auto-Close

Any open trade is closed on Friday at:

NY Open + 2 hours


So with NY at 14 → auto-close at 16 (4 PM).

This protects from weekend gaps.

⚡ 6. Entry Mode
entryMode — “Tuesday Only” or “One Trade Per Week”

Tuesday Only → Strategy only enters on Tuesday

One Trade Per Week → Can enter any day after Monday, but only once per week