vdubus

Vdub Binary Options SniperVX v1

Vdub Binary Options SniperVX v1
Designed for Binary Options 60 sec trading upwards
Notes on chart
Please note the signal generated are configure to be super fast on candle opening. The down side to this is signals may switch direction mid stream.
ITM candlesticks signals generated went 6/300 Losses on a 1 min chart.
the blue line indicates reversal zones. Buy / sell targets are at the next projected line TF settings to suit

Sniper series

Favori Komutlardan Çıkart Favori Komutlara Ekle
//╭╮╱╱╭╮╭╮╱╱╭╮
//┃╰╮╭╯┃┃┃╱╱┃┃
//╰╮┃┃╭┻╯┣╮╭┫╰━┳╮╭┳━━╮
//╱┃╰╯┃╭╮┃┃┃┃╭╮┃┃┃┃━━┫
//╱╰╮╭┫╰╯┃╰╯┃╰╯┃╰╯┣━━┃
//╱╱╰╯╰━━┻━━┻━━┻━━┻━━╯
//╭━━━┳╮╱╱╱╱╱╱╱╭╮
//┃╭━╮┃┃╱╱╱╱╱╱╱┃┃
//┃┃╱╰┫╰━┳━━┳━╮╭━╮╭━━┫┃
//┃┃╱╭┫╭╮┃╭╮┃╭╮┫╭╮┫┃━┫┃
//┃╰━╯┃┃┃┃╭╮┃┃┃┃┃┃┃┃━┫╰╮
//╰━━━┻╯╰┻╯╰┻╯╰┻╯╰┻━━┻━╯
//━╯
//Vdub Binary Options SnipperVX v1 / Vdub Rejection Spike v3 intergration -
//Signal generator for Binary Options / ©Vdubus http://www.vdubus.co.uk/
study("Vdub Binary Options SniperVX  v1", overlay=true, shorttitle="Vdub_SniperBX_v1")
//
//====================channel======================
len = input(8, minval=1)
src = input(close, title="Source")
out = sma(src, len)
last8h = highest(close, 13)
lastl8 = lowest(close, 13)
bearish = cross(close,out) == 1 and close[1] > close
bullish = cross(close,out) == 1 and close[1] < close
channel2=input(false, title="Bar Channel On/Off")
ul2=plot(channel2?last8h:last8h==nz(last8h[1])?last8h:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level top", offset=0)
ll2=plot(channel2?lastl8:lastl8==nz(lastl8[1])?lastl8:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level bottom", offset=0)
//
//--------------------Trend colour ema------------------------------------------------//    ema trend direction trigger For Singals 1 & 2
src0 = close, len0 = input(13, minval=1, title="Trend Change EMA")
ema0 = ema(src0, len0)
plot_color = ema0 >= ema0[2]  ? lime: ema0 < ema0[2] ? red : na
plot(ema0, title="EMA", style=line, linewidth=1, color = plot_color)
//
//--Modified vyacheslav.shindin-------------------------------------------------//           Signal 1
//Configured ema signal output
slow = 8
fast = 5
vh1 = ema(highest(avg(low, close), fast), 5)
vl1 = ema(lowest(avg(high, close), slow), 8)
//
e_ema1 = ema(close, 1)
e_ema2 = ema(e_ema1, 1)
e_ema3 = ema(e_ema2, 1)
tema = 1 * (e_ema1 - e_ema2) + e_ema3
//
e_e1 = ema(close, 8)
e_e2 = ema(e_e1, 5)
dema = 2 * e_e1 - e_e2
signal = tema > dema ? max(vh1, vl1) : min(vh1, vl1)
is_call = tema > dema and signal > low and (signal-signal[1] > signal[1]-signal[2])
is_put = tema < dema and signal < high and (signal[1]-signal > signal[2]-signal[1])
 
plotshape(is_call ? 1 : na, title="BUY ARROW", color=green, text="*BUY*", style=shape.arrowup, location=location.belowbar)
plotshape(is_put ? -1 : na, title="SELL ARROW", color=red, text="*SELL*", style=shape.arrowdown)
//
//Modified - Rajandran R Supertrend----------------------------------------------------- //       Signal 2
Factor=input(1, minval=1,maxval = 000, title="Trend Transition Signal")
Pd=input(1, minval=1,maxval = 100)
Up=hl2-(Factor*atr(Pd))
Dn=hl2+(Factor*atr(Pd))
TrendUp=close[1]>TrendUp[1]? max(Up,TrendUp[1]) : Up
TrendDown=close[1]<TrendDown[1]? min(Dn,TrendDown[1]) : Dn
Trend = close > TrendDown[1] ? 1: close< TrendUp[1]? -1: nz(Trend[1],0)
 
plotarrow(Trend == 1 and Trend[1] == -1 ? Trend : na, title="Up Entry Arrow", colorup=lime, maxheight=1000, minheight=50, transp=85)
plotarrow(Trend == -1 and Trend[1] == 1 ? Trend : na, title="Down Entry Arrow", colordown=red, maxheight=1000, minheight=50, transp=85)
// Moddified [RS]Support and Resistance V0
RST = input(title='Support / Resistance length:', type=integer, defval=21)
RSTT = valuewhen(high >= highest(high, RST), high, 0)
RSTB = valuewhen(low <= lowest(low, RST), low, 0)
RT2 = plot(RSTT, color=RSTT != RSTT[1] ? na : red, linewidth=1, offset=0)
RB2 = plot(RSTB, color=RSTB != RSTB[1] ? na : green, linewidth=1, offset=0)
//
//===============================Directional Projection=======================================//
tf2 = input('1', title="Trend Projection TF / Mins/D/W")
M2 = input('ATR')
P2 = input(13.00, type=float)
W2 = input(1)
pf2 = pointfigure(tickerid, 'close', M2, P2, W2)
spfc2 = security(pf2, tf2, close)
channel3=input(false, title="Connect Projection High/Low")
p22=plot(channel3?spfc2:spfc2==nz(spfc2[1])?spfc2:na, color=blue, linewidth=2, style=linebr, title="Directional Projection", offset=0)
//----------------------------------------------------------------------//

Yorumlar

How long should this be trades for? 1 min or 2 min?
+137 Cevap Gönder
this to be used on min chart only
?
+58 Cevap Gönder
MarxBabu HumayunBajwa
@HumayunBajwa, Add this for more profitability
code available here

+74 Cevap Gönder
If the "buy" or "sell" signs overlap the big arrow is that a greater confirmation?
+41 Cevap Gönder
brecier yogatrader
@yogatrader, yes please
+1 Cevap Gönder
Program works great..been using for 6 months. Do you offer automated signals for this on Mt4? Or text/email alerts?
Thanks
+35 Cevap Gönder
shohei95 Forex-Top-Investments
@Forex-Top-Investments,

Exquse me. I want to know how to use this vdubsniper. Where do we entry point?
+37 Cevap Gönder
Not working more lost trades than wins.70% lost 30 % win.
+33 Cevap Gönder
Ana Sayfa Hisse Senedi Takipçisi Forex Takipçisi Kripto Takipçisi Ekonomik Takvim Nasıl Çalışır Grafik Özellikleri Ücretlendirme Tanıdık yönlendirme Kurallarımız Destek Merkezi Web Sitesi & Aracı Kurum Çözümleri Görsel Bileşenler(Widget) Grafik Çözümleri Hafif Grafik Kitaplığı Blog ve Haberler Twitter
Profil Profil Ayarları Hesap ve Ödemeler Tavsiye edilen arkadaşlar Koinler Destek Kayıtlarım Destek Merkezi Yayınlanmış Fikirler Takip Edenler Takip ediliyor Özel Mesajlar Sohbet Çıkış